[ARM] 5507/1: support R_ARM_MOVW_ABS_NC and MOVT_ABS relocation types

From: Bruce Ashfield <bruce.ashfield@windriver.com>

To fully support the armv7-a instruction set/optimizations, support
for the R_ARM_MOVW_ABS_NC and R_ARM_MOVT_ABS relocation types is
required.

The MOVW and MOVT are both load-immediate instructions, MOVW loads 16
bits into the bottom half of a register, and MOVT loads 16 bits into the
top half of a register.

The relocation information for these instructions has a full 32 bit
value, plus an addend which is stored in the 16 immediate bits in the
instruction itself.  The immediate bits in the instruction are not
contiguous (the register # splits it into a 4 bit and 12 bit value),
so the addend has to be extracted accordingly and added to the value.
The value is then split and put into the instruction; a MOVW uses the
bottom 16 bits of the value, and a MOVT uses the top 16 bits.

Signed-off-by: David Borman <david.borman@windriver.com>
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

1 files changed, 15 insertions, 0 deletions

diff --git a/arch/arm/kernel/module.c b/arch/arm/kernel/module.c
index d1731e39b496..bac03c81489d 100644
--- a/arch/arm/kernel/module.c
+++ b/arch/arm/kernel/module.c
@@ -169,6 +169,21 @@ apply_relocate(Elf32_Shdr *sechdrs, const char *strtab, unsigned int symindex,
                         *(u32 *)loc = offset & 0x7fffffff;
                         break;
 
+                case R_ARM_MOVW_ABS_NC:
+                case R_ARM_MOVT_ABS:
+                        offset = *(u32 *)loc;
+                        offset = ((offset & 0xf0000) >> 4) | (offset & 0xfff);
+                        offset = (offset ^ 0x8000) - 0x8000;
+
+                        offset += sym->st_value;
+                        if (ELF32_R_TYPE(rel->r_info) == R_ARM_MOVT_ABS)
+                                offset >>= 16;
+
+                        *(u32 *)loc &= 0xfff0f000;
+                        *(u32 *)loc |= ((offset & 0xf000) << 4) |
+                                        (offset & 0x0fff);
+                        break;
+
                 default:
                         printk(KERN_ERR "%s: unknown relocation: %u\n",
                                module->name, ELF32_R_TYPE(rel->r_info));