Merge branch 'devel' of master.kernel.org:/home/rmk/linux-2.6-arm

* 'devel' of master.kernel.org:/home/rmk/linux-2.6-arm: (291 commits)
  ARM: AMBA: Add pclk support to AMBA bus infrastructure
  ARM: 6278/2: fix regression in RealView after the introduction of pclk
  ARM: 6277/1: mach-shmobile: Allow users to select HZ, default to 128
  ARM: 6276/1: mach-shmobile: remove duplicate NR_IRQS_LEGACY
  ARM: 6246/1: mmci: support larger MMCIDATALENGTH register
  ARM: 6245/1: mmci: enable hardware flow control on Ux500 variants
  ARM: 6244/1: mmci: add variant data and default MCICLOCK support
  ARM: 6243/1: mmci: pass power_mode to the translate_vdd callback
  ARM: 6274/1: add global control registers definition header file for nuc900
  mx2_camera: fix type of dma buffer virtual address pointer
  mx2_camera: Add soc_camera support for i.MX25/i.MX27
  arm/imx/gpio: add spinlock protection
  ARM: Add support for the LPC32XX arch
  ARM: LPC32XX: Arch config menu supoport and makefiles
  ARM: LPC32XX: Phytec 3250 platform support
  ARM: LPC32XX: Misc support functions
  ARM: LPC32XX: Serial support code
  ARM: LPC32XX: System suspend support
  ARM: LPC32XX: GPIO, timer, and IRQ drivers
  ARM: LPC32XX: Clock driver
  ...

6 files changed, 33 insertions, 102 deletions

diff --git a/arch/arm/boot/Makefile b/arch/arm/boot/Makefile
index 4a590f4113e2..f705213caa88 100644
--- a/arch/arm/boot/Makefile
+++ b/arch/arm/boot/Makefile
@@ -14,18 +14,16 @@
 MKIMAGE         := $(srctree)/scripts/mkuboot.sh
 
 ifneq ($(MACHINE),)
-include $(srctree)/$(MACHINE)/Makefile.boot
+-include $(srctree)/$(MACHINE)/Makefile.boot
 endif
 
 # Note: the following conditions must always be true:
-#   ZRELADDR == virt_to_phys(PAGE_OFFSET + TEXT_OFFSET)
 #   PARAMS_PHYS must be within 4MB of ZRELADDR
 #   INITRD_PHYS must be in RAM
-ZRELADDR    := $(zreladdr-y)
 PARAMS_PHYS := $(params_phys-y)
 INITRD_PHYS := $(initrd_phys-y)
 
-export ZRELADDR INITRD_PHYS PARAMS_PHYS
+export INITRD_PHYS PARAMS_PHYS
 
 targets := Image zImage xipImage bootpImage uImage
 
@@ -67,7 +65,7 @@ quiet_cmd_uimage = UIMAGE  $@
 ifeq ($(CONFIG_ZBOOT_ROM),y)
 $(obj)/uImage: LOADADDR=$(CONFIG_ZBOOT_ROM_TEXT)
 else
-$(obj)/uImage: LOADADDR=$(ZRELADDR)
+$(obj)/uImage: LOADADDR=$(CONFIG_ZRELADDR)
 endif
 
 ifeq ($(CONFIG_THUMB2_KERNEL),y)
diff --git a/arch/arm/boot/compressed/Makefile b/arch/arm/boot/compressed/Makefile
index 864a002137fe..7636c9b3f9a7 100644
--- a/arch/arm/boot/compressed/Makefile
+++ b/arch/arm/boot/compressed/Makefile
@@ -4,6 +4,7 @@
 # create a compressed vmlinuz image from the original vmlinux
 #
 
+AFLAGS_head.o += -DTEXT_OFFSET=$(TEXT_OFFSET)
 HEAD    = head.o
 OBJS    = misc.o decompress.o
 FONTC   = $(srctree)/drivers/video/console/font_acorn_8x8.c
@@ -19,10 +20,6 @@ ifeq ($(CONFIG_ARCH_SHARK),y)
 OBJS            += head-shark.o ofw-shark.o
 endif
 
-ifeq ($(CONFIG_ARCH_L7200),y)
-OBJS            += head-l7200.o
-endif
-
 ifeq ($(CONFIG_ARCH_P720T),y)
 # Borrow this code from SA1100
 OBJS            += head-sa1100.o
@@ -82,19 +79,9 @@ endif
 EXTRA_CFLAGS  := -fpic -fno-builtin
 EXTRA_AFLAGS  := -Wa,-march=all
 
-# Supply ZRELADDR, INITRD_PHYS and PARAMS_PHYS to the decompressor via
-# linker symbols.  We only define initrd_phys and params_phys if the
-# machine class defined the corresponding makefile variable.
-LDFLAGS_vmlinux := --defsym zreladdr=$(ZRELADDR)
 ifeq ($(CONFIG_CPU_ENDIAN_BE8),y)
 LDFLAGS_vmlinux += --be8
 endif
-ifneq ($(INITRD_PHYS),)
-LDFLAGS_vmlinux += --defsym initrd_phys=$(INITRD_PHYS)
-endif
-ifneq ($(PARAMS_PHYS),)
-LDFLAGS_vmlinux += --defsym params_phys=$(PARAMS_PHYS)
-endif
 # ?
 LDFLAGS_vmlinux += -p
 # Report unresolved symbol references
diff --git a/arch/arm/boot/compressed/Makefile.debug b/arch/arm/boot/compressed/Makefile.debug
deleted file mode 100644
index 491a037b2973..000000000000
--- a/arch/arm/boot/compressed/Makefile.debug
+++ /dev/null
@@ -1,23 +0,0 @@
-#
-# linux/arch/arm/boot/compressed/Makefile
-#
-# create a compressed vmlinux image from the original vmlinux
-#
-
-COMPRESSED_EXTRA=../../lib/ll_char_wr.o
-OBJECTS=misc-debug.o ll_char_wr.aout.o
-
-CFLAGS=-D__KERNEL__ -O2 -DSTDC_HEADERS -DSTANDALONE_DEBUG -Wall -I../../../../include -c
-
-test-gzip: piggy.aout.o $(OBJECTS)
-        $(CC) -o $@ $(OBJECTS) piggy.aout.o
-
-misc-debug.o: misc.c
-        $(CC) $(CFLAGS) -o $@ misc.c
-
-piggy.aout.o: piggy.o
-        arm-linuxelf-objcopy --change-leading-char -I elf32-arm -O arm-aout32-linux piggy.o piggy.aout.o
-
-ll_char_wr.aout.o: $(COMPRESSED_EXTRA)
-        arm-linuxelf-objcopy --change-leading-char -I elf32-arm -O arm-aout32-linux $(COMPRESSED_EXTRA) ll_char_wr.aout.o
-
diff --git a/arch/arm/boot/compressed/head-l7200.S b/arch/arm/boot/compressed/head-l7200.S
deleted file mode 100644
index d0e3b20856cd..000000000000
--- a/arch/arm/boot/compressed/head-l7200.S
+++ /dev/null
@@ -1,29 +0,0 @@
-/* 
- * linux/arch/arm/boot/compressed/head-l7200.S
- * 
- * Copyright (C) 2000 Steve Hill <sjhill@cotw.com>
- * 
- * Some code borrowed from Nicolas Pitre's 'head-sa1100.S' file. This
- * is merged with head.S by the linker.
- */
-
-#include <asm/mach-types.h>
-
-#ifndef CONFIG_ARCH_L7200
-#error What am I doing here...
-#endif
-
-                .section        ".start", "ax"
-
-__L7200_start:
-                mov     r0, #0x00100000         @ FLASH address of initrd
-                mov     r2, #0xf1000000         @ RAM address of initrd
-                add     r3, r2, #0x00700000     @ Size of initrd 
-1:
-                ldmia   r0!, {r4, r5, r6, r7}
-                stmia   r2!, {r4, r5, r6, r7}
-                cmp     r2, r3
-                ble     1b
-
-                mov     r8, #0                  @ Zero it out
-                mov     r7, #MACH_TYPE_L7200    @ Set architecture ID
diff --git a/arch/arm/boot/compressed/head.S b/arch/arm/boot/compressed/head.S
index c5191b1532e8..abf4d65acf62 100644
--- a/arch/arm/boot/compressed/head.S
+++ b/arch/arm/boot/compressed/head.S
@@ -170,9 +170,16 @@ not_angel:
 
                 .text
                 adr     r0, LC0
- ARM(           ldmia   r0, {r1, r2, r3, r4, r5, r6, r11, ip, sp})
- THUMB(         ldmia   r0, {r1, r2, r3, r4, r5, r6, r11, ip}   )
+ ARM(           ldmia   r0, {r1, r2, r3, r5, r6, r11, ip, sp})
+ THUMB(         ldmia   r0, {r1, r2, r3, r5, r6, r11, ip}       )
  THUMB(         ldr     sp, [r0, #32]                           )
+#ifdef CONFIG_AUTO_ZRELADDR
+                @ determine final kernel image address
+                and     r4, pc, #0xf8000000
+                add     r4, r4, #TEXT_OFFSET
+#else
+                ldr     r4, =CONFIG_ZRELADDR
+#endif
                 subs    r0, r0, r1              @ calculate the delta offset
 
                                                 @ if delta is zero, we are
@@ -310,18 +317,17 @@ wont_overwrite:	mov	r0, r4
 LC0:            .word   LC0                     @ r1
                 .word   __bss_start             @ r2
                 .word   _end                    @ r3
-                .word   zreladdr                @ r4
                 .word   _start                  @ r5
                 .word   _image_size             @ r6
                 .word   _got_start              @ r11
                 .word   _got_end                @ ip
-                .word   user_stack+4096         @ sp
+                .word   user_stack_end          @ sp
 LC1:            .word   reloc_end - reloc_start
                 .size   LC0, . - LC0
 
 #ifdef CONFIG_ARCH_RPC
                 .globl  params
-params:         ldr     r0, =params_phys
+params:         ldr     r0, =0x10000100         @ params_phys for RPC
                 mov     pc, lr
                 .ltorg
                 .align
@@ -339,9 +345,8 @@ params:		ldr	r0, =params_phys
  *  r4 = kernel execution address
  *  r7 = architecture number
  *  r8 = atags pointer
- *  r9 = run-time address of "start"  (???)
  * On exit,
- *  r1, r2, r3, r9, r10, r12 corrupted
+ *  r0, r1, r2, r3, r9, r10, r12 corrupted
  * This routine must preserve:
  *  r4, r5, r6, r7, r8
  */
@@ -396,12 +401,18 @@ __armv3_mpu_cache_on:
 
                 mov     r0, #0
                 mcr     p15, 0, r0, c7, c0, 0   @ invalidate whole cache v3
+                /*
+                 * ?? ARMv3 MMU does not allow reading the control register,
+                 * does this really work on ARMv3 MPU?
+                 */
                 mrc     p15, 0, r0, c1, c0, 0   @ read control reg
                                                 @ .... .... .... WC.M
                 orr     r0, r0, #0x000d         @ .... .... .... 11.1
+                /* ?? this overwrites the value constructed above? */
                 mov     r0, #0
                 mcr     p15, 0, r0, c1, c0, 0   @ write control reg
 
+                /* ?? invalidate for the second time? */
                 mcr     p15, 0, r0, c7, c0, 0   @ invalidate whole cache v3
                 mov     pc, lr
 
@@ -771,8 +782,10 @@ proc_types:
  * Turn off the Cache and MMU.  ARMv3 does not support
  * reading the control register, but ARMv4 does.
  *
- * On exit, r0, r1, r2, r3, r9, r12 corrupted
- * This routine must preserve: r4, r6, r7
+ * On exit,
+ *  r0, r1, r2, r3, r9, r12 corrupted
+ * This routine must preserve:
+ *  r4, r6, r7
  */
                 .align  5
 cache_off:      mov     r3, #12                 @ cache_off function
@@ -845,7 +858,7 @@ __armv3_mmu_cache_off:
  * Clean and flush the cache to maintain consistency.
  *
  * On exit,
- *  r1, r2, r3, r9, r11, r12 corrupted
+ *  r1, r2, r3, r9, r10, r11, r12 corrupted
  * This routine must preserve:
  *  r0, r4, r5, r6, r7
  */
@@ -988,7 +1001,7 @@ no_cache_id:
 __armv3_mmu_cache_flush:
 __armv3_mpu_cache_flush:
                 mov     r1, #0
-                mcr     p15, 0, r0, c7, c0, 0   @ invalidate whole cache v3
+                mcr     p15, 0, r1, c7, c0, 0   @ invalidate whole cache v3
                 mov     pc, lr
 
 /*
@@ -1001,6 +1014,7 @@ __armv3_mpu_cache_flush:
 phexbuf:        .space  12
                 .size   phexbuf, . - phexbuf
 
+@ phex corrupts {r0, r1, r2, r3}
 phex:           adr     r3, phexbuf
                 mov     r2, #0
                 strb    r2, [r3, r1]
@@ -1015,6 +1029,7 @@ phex:		adr	r3, phexbuf
                 strb    r2, [r3, r1]
                 b       1b
 
+@ puts corrupts {r0, r1, r2, r3}
 puts:           loadsp  r3, r1
 1:              ldrb    r2, [r0], #1
                 teq     r2, #0
@@ -1029,12 +1044,14 @@ puts:		loadsp	r3, r1
                 teq     r0, #0
                 bne     1b
                 mov     pc, lr
+@ putc corrupts {r0, r1, r2, r3}
 putc:
                 mov     r2, r0
                 mov     r0, #0
                 loadsp  r3, r1
                 b       2b
 
+@ memdump corrupts {r0, r1, r2, r3, r10, r11, r12, lr}
 memdump:        mov     r12, r0
                 mov     r10, lr
                 mov     r11, #0
@@ -1070,3 +1087,4 @@ reloc_end:
                 .align
                 .section ".stack", "w"
 user_stack:     .space  4096
+user_stack_end:
diff --git a/arch/arm/boot/compressed/misc.c b/arch/arm/boot/compressed/misc.c
index d2b2ef41cd4f..e653a6d3c8d9 100644
--- a/arch/arm/boot/compressed/misc.c
+++ b/arch/arm/boot/compressed/misc.c
@@ -28,9 +28,6 @@ unsigned int __machine_arch_type;
 
 #include <asm/unaligned.h>
 
-#ifdef STANDALONE_DEBUG
-#define putstr printf
-#else
 
 static void putstr(const char *ptr);
 extern void error(char *x);
@@ -116,7 +113,6 @@ static void putstr(const char *ptr)
         flush();
 }
 
-#endif
 
 void *memcpy(void *__dest, __const void *__src, size_t __n)
 {
@@ -186,7 +182,6 @@ asmlinkage void __div0(void)
 
 extern void do_decompress(u8 *input, int len, u8 *output, void (*error)(char *x));
 
-#ifndef STANDALONE_DEBUG
 
 unsigned long
 decompress_kernel(unsigned long output_start, unsigned long free_mem_ptr_p,
@@ -211,18 +206,3 @@ decompress_kernel(unsigned long output_start, unsigned long free_mem_ptr_p,
         putstr(" done, booting the kernel.\n");
         return output_ptr;
 }
-#else
-
-char output_buffer[1500*1024];
-
-int main()
-{
-        output_data = output_buffer;
-
-        putstr("Uncompressing Linux...");
-        decompress(input_data, input_data_end - input_data,
-                        NULL, NULL, output_data, NULL, error);
-        putstr("done.\n");
-        return 0;
-}
-#endif