ARM: Kirkwood: convert rd88f6281-setup.c to DT.

Perform a mechanical translation of rd88f6281-setup.c into DT.  Since
the hardware differs between the A0 and A1 stepping, two dts files are
used, and a .dtsi file for the common parts. The A0 part does not have
a "wan" port on the switch and uses PHY address 10 to address the
switch. The A1 part does have the "wan" port and uses address 0.

Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Jason Cooper <jason@lakedaemon.net>

4 files changed, 211 insertions, 0 deletions

diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
index 40132ea1ac0e..0eda36cbf7e0 100644
--- a/arch/arm/boot/dts/Makefile
+++ b/arch/arm/boot/dts/Makefile
@@ -113,6 +113,8 @@ dtb-$(CONFIG_ARCH_KIRKWOOD) += kirkwood-b3.dtb \
         kirkwood-openblocks_a6.dtb \
         kirkwood-openblocks_a7.dtb \
         kirkwood-rd88f6192.dtb \
+        kirkwood-rd88f6281-a0.dtb \
+        kirkwood-rd88f6281-a1.dtb \
         kirkwood-sheevaplug.dtb \
         kirkwood-sheevaplug-esata.dtb \
         kirkwood-topkick.dtb \
diff --git a/arch/arm/boot/dts/kirkwood-rd88f6281-a0.dts b/arch/arm/boot/dts/kirkwood-rd88f6281-a0.dts
new file mode 100644
index 000000000000..a803bbb70bc8
--- /dev/null
+++ b/arch/arm/boot/dts/kirkwood-rd88f6281-a0.dts
@@ -0,0 +1,26 @@
+/*
+ * Marvell RD88F6181 A0 Board descrition
+ *
+ * Andrew Lunn <andrew@lunn.ch>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2.  This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ *
+ * This file contains the definitions for the board with the A0 variant of
+ * the SoC. The ethernet switch does not have a "wan" port.
+ */
+
+/dts-v1/;
+#include "kirkwood-rd88f6281.dtsi"
+
+/ {
+        model = "Marvell RD88f6281 Reference design, with A0 SoC";
+        compatible = "marvell,rd88f6281-a0", "marvell,rd88f6281","marvell,kirkwood-88f6281", "marvell,kirkwood";
+
+        dsa@0 {
+                switch@0 {
+                        reg = <10 0>;    /* MDIO address 10, switch 0 in tree */
+                };
+        };
+};
\ No newline at end of file
diff --git a/arch/arm/boot/dts/kirkwood-rd88f6281-a1.dts b/arch/arm/boot/dts/kirkwood-rd88f6281-a1.dts
new file mode 100644
index 000000000000..baeebbf1d8c7
--- /dev/null
+++ b/arch/arm/boot/dts/kirkwood-rd88f6281-a1.dts
@@ -0,0 +1,31 @@
+/*
+ * Marvell RD88F6181 A1 Board descrition
+ *
+ * Andrew Lunn <andrew@lunn.ch>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2.  This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ *
+ * This file contains the definitions for the board with the A1 variant of
+ * the SoC. The ethernet switch has a "wan" port.
+ */
+
+/dts-v1/;
+
+#include "kirkwood-rd88f6281.dtsi"
+
+/ {
+        model = "Marvell RD88f6281 Reference design, with A1 SoC";
+        compatible = "marvell,rd88f6281-a1", "marvell,rd88f6281","marvell,kirkwood-88f6281", "marvell,kirkwood";
+
+        dsa@0 {
+                switch@0 {
+                        reg = <0 0>;    /* MDIO address 0, switch 0 in tree */
+                        port@4 {
+                                reg = <4>;
+                                label = "wan";
+                        };
+                };
+        };
+};
\ No newline at end of file
diff --git a/arch/arm/boot/dts/kirkwood-rd88f6281.dtsi b/arch/arm/boot/dts/kirkwood-rd88f6281.dtsi
new file mode 100644
index 000000000000..d6368c39102e
--- /dev/null
+++ b/arch/arm/boot/dts/kirkwood-rd88f6281.dtsi
@@ -0,0 +1,152 @@
+/*
+ * Marvell RD88F6181 Common Board descrition
+ *
+ * Andrew Lunn <andrew@lunn.ch>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2.  This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ *
+ * This file contains the definitions that are common between the two
+ * variants of the Marvell Kirkwood Development Board.
+ */
+
+#include "kirkwood.dtsi"
+#include "kirkwood-6281.dtsi"
+
+/ {
+        memory {
+                device_type = "memory";
+                reg = <0x00000000 0x20000000>;
+        };
+
+        chosen {
+                bootargs = "console=ttyS0,115200n8";
+        };
+
+        mbus {
+                pcie-controller {
+                        status = "okay";
+
+                        pcie@1,0 {
+                                status = "okay";
+                        };
+                };
+        };
+
+        ocp@f1000000 {
+                pinctrl: pinctrl@10000 {
+                        pinctrl-0 = <&pmx_sdio_cd>;
+                        pinctrl-names = "default";
+
+                        pmx_sdio_cd: pmx-sdio-cd {
+                                marvell,pins = "mpp28";
+                                marvell,function = "gpio";
+                        };
+                };
+
+                serial@12000 {
+                        status = "okay";
+
+                };
+
+                sata@80000 {
+                        status = "okay";
+                        nr-ports = <2>;
+                };
+                mvsdio@90000 {
+                        pinctrl-0 = <&pmx_sdio &pmx_sdio_cd>;
+                        pinctrl-names = "default";
+                        status = "okay";
+                        cd-gpios = <&gpio0 28 GPIO_ACTIVE_HIGH>;
+                        /* No WP GPIO */
+                };
+        };
+
+        dsa@0 {
+                compatible = "marvell,dsa";
+                #address-cells = <2>;
+                #size-cells = <0>;
+
+                dsa,ethernet = <&eth0>;
+                dsa,mii-bus = <&ethphy1>;
+
+                switch@0 {
+                        #address-cells = <1>;
+                        #size-cells = <0>;
+
+                        port@0 {
+                                reg = <0>;
+                                label = "lan1";
+                        };
+
+                        port@1 {
+                                reg = <1>;
+                                label = "lan2";
+                        };
+
+                        port@2 {
+                                reg = <2>;
+                                label = "lan3";
+                        };
+
+                        port@3 {
+                                reg = <3>;
+                                label = "lan4";
+                        };
+
+                        port@5 {
+                                reg = <5>;
+                                label = "cpu";
+                        };
+                };
+       };
+};
+
+&nand {
+        status = "okay";
+
+        partition@0 {
+                label = "u-boot";
+                reg = <0x0000000 0x100000>;
+                read-only;
+        };
+
+        partition@100000 {
+                label = "uImage";
+                reg = <0x0100000 0x200000>;
+        };
+
+        partition@300000 {
+                label = "data";
+                reg = <0x0300000 0x500000>;
+        };
+};
+
+&mdio {
+        status = "okay";
+
+        ethphy0: ethernet-phy@0 {
+                reg = <0>;
+        };
+
+        ethphy1: ethernet-phy@ff {
+                reg = <0xff>; /* No PHY attached */
+                speed = <1000>;
+                duple = <1>;
+        };
+};
+
+&eth0 {
+        status = "okay";
+        ethernet0-port@0 {
+                phy-handle = <&ethphy0>;
+        };
+};
+
+&eth1 {
+        status = "okay";
+        ethernet1-port@0 {
+                phy-handle = <&ethphy1>;
+        };
+};