dts: vt8500: Add initial dts support for WM8850

This patch adds a soc dtsi for the Wondermedia WM8850.

A board dts file is also included for the W70v2 tablet, with support
for all the drivers currently in mainline.

Signed-off-by: Tony Prisk <linux@prisktech.co.nz>
Signed-off-by: Olof Johansson <olof@lixom.net>

1 files changed, 224 insertions, 0 deletions

diff --git a/arch/arm/boot/dts/wm8850.dtsi b/arch/arm/boot/dts/wm8850.dtsi
new file mode 100644
index 000000000000..e8cbfdc87bba
--- /dev/null
+++ b/arch/arm/boot/dts/wm8850.dtsi
@@ -0,0 +1,224 @@
+/*
+ * wm8850.dtsi - Device tree file for Wondermedia WM8850 SoC
+ *
+ * Copyright (C) 2012 Tony Prisk <linux@prisktech.co.nz>
+ *
+ * Licensed under GPLv2 or later
+ */
+
+/include/ "skeleton.dtsi"
+
+/ {
+        compatible = "wm,wm8850";
+
+        aliases {
+                serial0 = &uart0;
+                serial1 = &uart1;
+                serial2 = &uart2;
+                serial3 = &uart3;
+        };
+
+        soc {
+                #address-cells = <1>;
+                #size-cells = <1>;
+                compatible = "simple-bus";
+                ranges;
+                interrupt-parent = <&intc0>;
+
+                intc0: interrupt-controller@d8140000 {
+                        compatible = "via,vt8500-intc";
+                        interrupt-controller;
+                        reg = <0xd8140000 0x10000>;
+                        #interrupt-cells = <1>;
+                };
+
+                /* Secondary IC cascaded to intc0 */
+                intc1: interrupt-controller@d8150000 {
+                        compatible = "via,vt8500-intc";
+                        interrupt-controller;
+                        #interrupt-cells = <1>;
+                        reg = <0xD8150000 0x10000>;
+                        interrupts = <56 57 58 59 60 61 62 63>;
+                };
+
+                gpio: gpio-controller@d8110000 {
+                        compatible = "wm,wm8650-gpio";
+                        gpio-controller;
+                        reg = <0xd8110000 0x10000>;
+                        #gpio-cells = <3>;
+                };
+
+                pmc@d8130000 {
+                        compatible = "via,vt8500-pmc";
+                        reg = <0xd8130000 0x1000>;
+
+                        clocks {
+                                #address-cells = <1>;
+                                #size-cells = <0>;
+
+                                ref25: ref25M {
+                                        #clock-cells = <0>;
+                                        compatible = "fixed-clock";
+                                        clock-frequency = <25000000>;
+                                };
+
+                                ref24: ref24M {
+                                        #clock-cells = <0>;
+                                        compatible = "fixed-clock";
+                                        clock-frequency = <24000000>;
+                                };
+
+                                plla: plla {
+                                        #clock-cells = <0>;
+                                        compatible = "wm,wm8750-pll-clock";
+                                        clocks = <&ref25>;
+                                        reg = <0x200>;
+                                };
+
+                                pllb: pllb {
+                                        #clock-cells = <0>;
+                                        compatible = "wm,wm8750-pll-clock";
+                                        clocks = <&ref25>;
+                                        reg = <0x204>;
+                                };
+
+                                clkuart0: uart0 {
+                                        #clock-cells = <0>;
+                                        compatible = "via,vt8500-device-clock";
+                                        clocks = <&ref24>;
+                                        enable-reg = <0x254>;
+                                        enable-bit = <24>;
+                                };
+
+                                clkuart1: uart1 {
+                                        #clock-cells = <0>;
+                                        compatible = "via,vt8500-device-clock";
+                                        clocks = <&ref24>;
+                                        enable-reg = <0x254>;
+                                        enable-bit = <25>;
+                                };
+
+                                clkuart2: uart2 {
+                                        #clock-cells = <0>;
+                                        compatible = "via,vt8500-device-clock";
+                                        clocks = <&ref24>;
+                                        enable-reg = <0x254>;
+                                        enable-bit = <26>;
+                                };
+
+                                clkuart3: uart3 {
+                                        #clock-cells = <0>;
+                                        compatible = "via,vt8500-device-clock";
+                                        clocks = <&ref24>;
+                                        enable-reg = <0x254>;
+                                        enable-bit = <27>;
+                                };
+
+                                clkpwm: pwm {
+                                        #clock-cells = <0>;
+                                        compatible = "via,vt8500-device-clock";
+                                        clocks = <&pllb>;
+                                        divisor-reg = <0x350>;
+                                        enable-reg = <0x250>;
+                                        enable-bit = <17>;
+                                };
+
+                                clksdhc: sdhc {
+                                        #clock-cells = <0>;
+                                        compatible = "via,vt8500-device-clock";
+                                        clocks = <&pllb>;
+                                        divisor-reg = <0x330>;
+                                        divisor-mask = <0x3f>;
+                                        enable-reg = <0x250>;
+                                        enable-bit = <0>;
+                                };
+                        };
+                };
+
+                fb@d8051700 {
+                        compatible = "wm,wm8505-fb";
+                        reg = <0xd8051700 0x200>;
+                        display = <&display>;
+                        default-mode = <&mode0>;
+                };
+
+                ge_rops@d8050400 {
+                        compatible = "wm,prizm-ge-rops";
+                        reg = <0xd8050400 0x100>;
+                };
+
+                pwm: pwm@d8220000 {
+                        #pwm-cells = <3>;
+                        compatible = "via,vt8500-pwm";
+                        reg = <0xd8220000 0x100>;
+                        clocks = <&clkpwm>;
+                };
+
+                timer@d8130100 {
+                        compatible = "via,vt8500-timer";
+                        reg = <0xd8130100 0x28>;
+                        interrupts = <36>;
+                };
+
+                ehci@d8007900 {
+                        compatible = "via,vt8500-ehci";
+                        reg = <0xd8007900 0x200>;
+                        interrupts = <26>;
+                };
+
+                uhci@d8007b00 {
+                        compatible = "platform-uhci";
+                        reg = <0xd8007b00 0x200>;
+                        interrupts = <26>;
+                };
+
+                uhci@d8008d00 {
+                        compatible = "platform-uhci";
+                        reg = <0xd8008d00 0x200>;
+                        interrupts = <26>;
+                };
+
+                uart0: uart@d8200000 {
+                        compatible = "via,vt8500-uart";
+                        reg = <0xd8200000 0x1040>;
+                        interrupts = <32>;
+                        clocks = <&clkuart0>;
+                };
+
+                uart1: uart@d82b0000 {
+                        compatible = "via,vt8500-uart";
+                        reg = <0xd82b0000 0x1040>;
+                        interrupts = <33>;
+                        clocks = <&clkuart1>;
+                };
+
+                uart2: uart@d8210000 {
+                        compatible = "via,vt8500-uart";
+                        reg = <0xd8210000 0x1040>;
+                        interrupts = <47>;
+                        clocks = <&clkuart2>;
+                };
+
+                uart3: uart@d82c0000 {
+                        compatible = "via,vt8500-uart";
+                        reg = <0xd82c0000 0x1040>;
+                        interrupts = <50>;
+                        clocks = <&clkuart3>;
+                };
+
+                rtc@d8100000 {
+                        compatible = "via,vt8500-rtc";
+                        reg = <0xd8100000 0x10000>;
+                        interrupts = <48>;
+                };
+
+                sdhc@d800a000 {
+                        compatible = "wm,wm8505-sdhc";
+                        reg = <0xd800a000 0x1000>;
+                        interrupts = <20 21>;
+                        clocks = <&clksdhc>;
+                        bus-width = <4>;
+                        sdon-inverted;
+                };
+        };
+};