ARM: tegra: convert device tree files to use GPIO defines

Use TEGRA_GPIO() macro to name all GPIOs referenced by GPIO properties,
and some interrupts properties. Use standard GPIO flag defines too.

Signed-off-by: Stephen Warren <swarren@nvidia.com>

1 files changed, 12 insertions, 7 deletions

diff --git a/arch/arm/boot/dts/tegra20-colibri-512.dtsi b/arch/arm/boot/dts/tegra20-colibri-512.dtsi
index efd705157f6d..a80be142c96b 100644
--- a/arch/arm/boot/dts/tegra20-colibri-512.dtsi
+++ b/arch/arm/boot/dts/tegra20-colibri-512.dtsi
@@ -14,7 +14,8 @@
                         pll-supply = <&hdmi_pll_reg>;
 
                         nvidia,ddc-i2c-bus = <&i2c_ddc>;
-                        nvidia,hpd-gpio = <&gpio 111 0>; /* PN7 */
+                        nvidia,hpd-gpio = <&gpio TEGRA_GPIO(N, 7)
+                                GPIO_ACTIVE_HIGH>;
                 };
         };
 
@@ -443,21 +444,25 @@
 
         ac97: ac97 {
                 status = "okay";
-                nvidia,codec-reset-gpio = <&gpio 168 0>; /* gpio PV0 */
-                nvidia,codec-sync-gpio = <&gpio 120 0>; /* gpio PP0 */
+                nvidia,codec-reset-gpio = <&gpio TEGRA_GPIO(V, 0)
+                        GPIO_ACTIVE_HIGH>;
+                nvidia,codec-sync-gpio = <&gpio TEGRA_GPIO(P, 0)
+                        GPIO_ACTIVE_HIGH>;
         };
 
         usb@c5004000 {
                 status = "okay";
-                nvidia,phy-reset-gpio = <&gpio 169 1>; /* gpio PV1, active low */
+                nvidia,phy-reset-gpio = <&gpio TEGRA_GPIO(V, 1)
+                        GPIO_ACTIVE_LOW>;
         };
 
         usb-phy@c5004000 {
-                nvidia,phy-reset-gpio = <&gpio 169 1>; /* gpio PV1, active low */
+                nvidia,phy-reset-gpio = <&gpio TEGRA_GPIO(V, 1)
+                        GPIO_ACTIVE_LOW>;
         };
 
         sdhci@c8000600 {
-                cd-gpios = <&gpio 23 1>; /* gpio PC7 */
+                cd-gpios = <&gpio TEGRA_GPIO(C, 7) GPIO_ACTIVE_LOW>;
         };
 
         clocks {
@@ -514,7 +519,7 @@
                         enable-active-high;
                         regulator-boot-on;
                         regulator-always-on;
-                        gpio = <&gpio 217 0>;
+                        gpio = <&gpio TEGRA_GPIO(BB, 1) GPIO_ACTIVE_HIGH>;
                 };
         };
 };