ARM: sun7i: Add support for Olimex A20-OLinuXino-LIME

This patch adds support for Olimex A20-OLinuXino-LIME board.

Signed-off-by: FUKAUMI Naoki <naobsd@gmail.com>
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>

1 files changed, 137 insertions, 0 deletions

diff --git a/arch/arm/boot/dts/sun7i-a20-olinuxino-lime.dts b/arch/arm/boot/dts/sun7i-a20-olinuxino-lime.dts
new file mode 100644
index 000000000000..1eb8175959a6
--- /dev/null
+++ b/arch/arm/boot/dts/sun7i-a20-olinuxino-lime.dts
@@ -0,0 +1,137 @@
+/*
+ * This is based on sun4i-a10-olinuxino-lime.dts
+ *
+ * Copyright 2014 - Hans de Goede <hdegoede@redhat.com>
+ * Copyright (c) 2014 FUKAUMI Naoki <naobsd@gmail.com>
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+/dts-v1/;
+/include/ "sun7i-a20.dtsi"
+/include/ "sunxi-common-regulators.dtsi"
+
+/ {
+        model = "Olimex A20-OLinuXino-LIME";
+        compatible = "olimex,a20-olinuxino-lime", "allwinner,sun7i-a20";
+
+        soc@01c00000 {
+                mmc0: mmc@01c0f000 {
+                        pinctrl-names = "default";
+                        pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_reference_design>;
+                        vmmc-supply = <&reg_vcc3v3>;
+                        bus-width = <4>;
+                        cd-gpios = <&pio 7 1 0>; /* PH1 */
+                        cd-inverted;
+                        status = "okay";
+                };
+
+                usbphy: phy@01c13400 {
+                        usb1_vbus-supply = <&reg_usb1_vbus>;
+                        usb2_vbus-supply = <&reg_usb2_vbus>;
+                        status = "okay";
+                };
+
+                ehci0: usb@01c14000 {
+                        status = "okay";
+                };
+
+                ohci0: usb@01c14400 {
+                        status = "okay";
+                };
+
+                ahci: sata@01c18000 {
+                        target-supply = <&reg_ahci_5v>;
+                        status = "okay";
+                };
+
+                ehci1: usb@01c1c000 {
+                        status = "okay";
+                };
+
+                ohci1: usb@01c1c400 {
+                        status = "okay";
+                };
+
+                pinctrl@01c20800 {
+                        ahci_pwr_pin_olinuxinolime: ahci_pwr_pin@1 {
+                                allwinner,pins = "PC3";
+                                allwinner,function = "gpio_out";
+                                allwinner,drive = <0>;
+                                allwinner,pull = <0>;
+                        };
+
+                        led_pins_olinuxinolime: led_pins@0 {
+                                allwinner,pins = "PH2";
+                                allwinner,function = "gpio_out";
+                                allwinner,drive = <1>;
+                                allwinner,pull = <0>;
+                        };
+                };
+
+                uart0: serial@01c28000 {
+                        pinctrl-names = "default";
+                        pinctrl-0 = <&uart0_pins_a>;
+                        status = "okay";
+                };
+
+                i2c0: i2c@01c2ac00 {
+                        pinctrl-names = "default";
+                        pinctrl-0 = <&i2c0_pins_a>;
+                        status = "okay";
+
+                        axp209: pmic@34 {
+                                compatible = "x-powers,axp209";
+                                reg = <0x34>;
+                                interrupt-parent = <&nmi_intc>;
+                                interrupts = <0 8>;
+
+                                interrupt-controller;
+                                #interrupt-cells = <1>;
+                        };
+                };
+
+                gmac: ethernet@01c50000 {
+                        pinctrl-names = "default";
+                        pinctrl-0 = <&gmac_pins_mii_a>;
+                        phy = <&phy1>;
+                        phy-mode = "mii";
+                        status = "okay";
+
+                        phy1: ethernet-phy@1 {
+                                reg = <1>;
+                        };
+                };
+        };
+
+        leds {
+                compatible = "gpio-leds";
+                pinctrl-names = "default";
+                pinctrl-0 = <&led_pins_olinuxinolime>;
+
+                green {
+                        label = "a20-olinuxino-lime:green:usr";
+                        gpios = <&pio 7 2 0>;
+                        default-state = "on";
+                };
+        };
+
+        reg_ahci_5v: ahci-5v {
+                pinctrl-0 = <&ahci_pwr_pin_olinuxinolime>;
+                gpio = <&pio 2 3 0>;
+                status = "okay";
+        };
+
+        reg_usb1_vbus: usb1-vbus {
+                status = "okay";
+        };
+
+        reg_usb2_vbus: usb2-vbus {
+                status = "okay";
+        };
+};