ARM: dts: sun7i: Add Mele M3 board

The Mele M3 is yet another Allwinnner based Android top set box from Mele.

It uses a housing similar to the A2000, but without the USM sata storage slot
at the top.

It features an A20 SoC, 1G RAM, 4G eMMC (unique for Allwinner devices),
100Mbit ethernet, HDMI out, 3 USB A receptacles, VGA, and A/V OUT connections.

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>

1 files changed, 168 insertions, 0 deletions

diff --git a/arch/arm/boot/dts/sun7i-a20-m3.dts b/arch/arm/boot/dts/sun7i-a20-m3.dts
new file mode 100644
index 000000000000..ce071417e029
--- /dev/null
+++ b/arch/arm/boot/dts/sun7i-a20-m3.dts
@@ -0,0 +1,168 @@
+/*
+ * Copyright 2014 Hans de Goede <hdegoede@redhat.com>
+ *
+ * Hans de Goede <hdegoede@redhat.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This library is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This library is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ *     You should have received a copy of the GNU General Public
+ *     License along with this library; if not, write to the Free
+ *     Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
+ *     MA 02110-1301 USA
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+/include/ "sun7i-a20.dtsi"
+/include/ "sunxi-common-regulators.dtsi"
+
+/ {
+        model = "Mele M3";
+        compatible = "mele,m3", "allwinner,sun7i-a20";
+
+        soc@01c00000 {
+                mmc0: mmc@01c0f000 {
+                        pinctrl-names = "default";
+                        pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_reference_design>;
+                        vmmc-supply = <&reg_vcc3v3>;
+                        bus-width = <4>;
+                        cd-gpios = <&pio 7 1 0>; /* PH1 */
+                        cd-inverted;
+                        status = "okay";
+                };
+
+                mmc2: mmc@01c11000 {
+                        pinctrl-names = "default";
+                        pinctrl-0 = <&mmc2_pins_a>;
+                        vmmc-supply = <&reg_vcc3v3>;
+                        bus-width = <4>;
+                        non-removable;
+                        status = "okay";
+                };
+
+                usbphy: phy@01c13400 {
+                        usb1_vbus-supply = <&reg_usb1_vbus>;
+                        usb2_vbus-supply = <&reg_usb2_vbus>;
+                        status = "okay";
+                };
+
+                ehci0: usb@01c14000 {
+                        status = "okay";
+                };
+
+                ohci0: usb@01c14400 {
+                        status = "okay";
+                };
+
+                ehci1: usb@01c1c000 {
+                        status = "okay";
+                };
+
+                ohci1: usb@01c1c400 {
+                        status = "okay";
+                };
+
+                pinctrl@01c20800 {
+                        led_pins_m3: led_pins@0 {
+                                allwinner,pins = "PH20";
+                                allwinner,function = "gpio_out";
+                                allwinner,drive = <0>;
+                                allwinner,pull = <0>;
+                        };
+                };
+
+                ir0: ir@01c21800 {
+                        pinctrl-names = "default";
+                        pinctrl-0 = <&ir0_pins_a>;
+                        status = "okay";
+                };
+
+                uart0: serial@01c28000 {
+                        pinctrl-names = "default";
+                        pinctrl-0 = <&uart0_pins_a>;
+                        status = "okay";
+                };
+
+                i2c0: i2c@01c2ac00 {
+                        pinctrl-names = "default";
+                        pinctrl-0 = <&i2c0_pins_a>;
+                        status = "okay";
+
+                        axp209: pmic@34 {
+                                compatible = "x-powers,axp209";
+                                reg = <0x34>;
+                                interrupt-parent = <&nmi_intc>;
+                                interrupts = <0 8>;
+
+                                interrupt-controller;
+                                #interrupt-cells = <1>;
+                        };
+                };
+
+                gmac: ethernet@01c50000 {
+                        pinctrl-names = "default";
+                        pinctrl-0 = <&gmac_pins_mii_a>;
+                        phy = <&phy1>;
+                        phy-mode = "mii";
+                        status = "okay";
+
+                        phy1: ethernet-phy@1 {
+                                reg = <1>;
+                        };
+                };
+        };
+
+        leds {
+                compatible = "gpio-leds";
+                pinctrl-names = "default";
+                pinctrl-0 = <&led_pins_m3>;
+
+                blue {
+                        label = "m3:blue:usr";
+                        gpios = <&pio 7 20 0>;
+                };
+        };
+
+        reg_usb1_vbus: usb1-vbus {
+                status = "okay";
+        };
+
+        reg_usb2_vbus: usb2-vbus {
+                status = "okay";
+        };
+};