ARM: ux500: Add a DT node for the Nomadik System Timer (MTU0)

The MTU0 is required for full booting of the system. The driver has
been previously DT:ed and is in use on the Nomadik platform, but we
also need to enable it on ux500 based systems.

Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>

1 files changed, 11 insertions, 0 deletions

diff --git a/arch/arm/boot/dts/ste-dbx5x0.dtsi b/arch/arm/boot/dts/ste-dbx5x0.dtsi
index 80b0304dd441..c417cb8a24ab 100644
--- a/arch/arm/boot/dts/ste-dbx5x0.dtsi
+++ b/arch/arm/boot/dts/ste-dbx5x0.dtsi
@@ -43,6 +43,7 @@
                         interrupts = <0 7 IRQ_TYPE_LEVEL_HIGH>;
                 };
 
+
                 clocks {
                         compatible = "stericsson,u8500-clks";
 
@@ -67,6 +68,16 @@
                         };
                 };
 
+                mtu@a03c6000 {
+                        /* Nomadik System Timer */
+                        compatible = "st,nomadik-mtu";
+                        reg = <0xa03c6000 0x1000>;
+                        interrupts = <0 4 IRQ_TYPE_LEVEL_HIGH>;
+
+                        clocks = <&prcmu_clk PRCMU_TIMCLK>, <&prcc_pclk 6 6>;
+                        clock-names = "timclk", "apb_pclk";
+                };
+
                 timer@a0410600 {
                         compatible = "arm,cortex-a9-twd-timer";
                         reg = <0xa0410600 0x20>;