ARM: dts: omap3-igep0030-common: Introduce igep0030 common dtsi file.

Use the omap3-igep0030-common.dtsi file and remove repeated parts leaving
the nodes that are not common between IGEP COM MODULE hardware revisions.

Signed-off-by: Enric Balletbo i Serra <eballetbo@iseebcn.com>
Acked-by: Javier Martinez Canillas <javier@dowhile0.org>
Signed-off-by: Tony Lindgren <tony@atomide.com>

1 files changed, 9 insertions, 49 deletions

diff --git a/arch/arm/boot/dts/omap3-igep0030.dts b/arch/arm/boot/dts/omap3-igep0030.dts
index cc2a37437196..8150f47ccdf5 100644
--- a/arch/arm/boot/dts/omap3-igep0030.dts
+++ b/arch/arm/boot/dts/omap3-igep0030.dts
@@ -9,42 +9,12 @@
  * published by the Free Software Foundation.
  */
 
-#include "omap3-igep.dtsi"
+#include "omap3-igep0030-common.dtsi"
 
 / {
         model = "IGEP COM MODULE Rev. E (TI OMAP AM/DM37x)";
         compatible = "isee,omap3-igep0030", "ti,omap36xx", "ti,omap3";
 
-        leds {
-                pinctrl-names = "default";
-                pinctrl-0 = <&leds_pins>;
-                compatible = "gpio-leds";
-
-                boot {
-                         label = "omap3:green:boot";
-                         gpios = <&twl_gpio 13 GPIO_ACTIVE_LOW>;
-                         default-state = "on";
-                };
-
-                user0 {
-                         label = "omap3:red:user0";
-                         gpios = <&twl_gpio 18 GPIO_ACTIVE_LOW>; /* LEDA */
-                         default-state = "off";
-                };
-
-                user1 {
-                         label = "omap3:green:user1";
-                         gpios = <&twl_gpio 19 GPIO_ACTIVE_LOW>; /* LEDB */
-                         default-state = "off";
-                };
-
-                user2 {
-                         label = "omap3:red:user1";
-                         gpios = <&gpio1 16 GPIO_ACTIVE_LOW>;
-                         default-state = "off";
-                };
-        };
-
         /* Regulator to trigger the WIFI_PDN signal of the Wifi module */
         lbee1usjyc_pdn: lbee1usjyc_pdn {
                 compatible = "regulator-fixed";
@@ -75,22 +45,16 @@
                         OMAP3_CORE1_IOPAD(0x216a, PIN_OUTPUT | MUX_MODE4)       /* sdmmc2_dat7.gpio_139 - RST_N_B */
                 >;
         };
-
-        uart2_pins: pinmux_uart2_pins {
-                pinctrl-single,pins = <
-                        OMAP3_CORE1_IOPAD(0x216c, PIN_INPUT | MUX_MODE1)        /* mcbsp3_dx.uart2_cts */
-                        OMAP3_CORE1_IOPAD(0x216e, PIN_OUTPUT | MUX_MODE1)       /* mcbsp3_dr.uart2_rts */
-                        OMAP3_CORE1_IOPAD(0x2170, PIN_OUTPUT | MUX_MODE1)       /* mcbsp3_clk.uart2_tx */
-                        OMAP3_CORE1_IOPAD(0x2172, PIN_INPUT | MUX_MODE1)        /* mcbsp3_fsx.uart2_rx */
-                >;
-        };
 };
 
-&omap3_pmx_core2 {
-        leds_pins: pinmux_leds_pins {
-                pinctrl-single,pins = <
-                        OMAP3630_CORE2_IOPAD(0x25e0, PIN_OUTPUT | MUX_MODE4) /* etk_d2.gpio_16 */
-                >;
+&leds {
+        pinctrl-names = "default";
+        pinctrl-0 = <&leds_core2_pins>;
+
+        boot {
+                label = "omap3:green:boot";
+                gpios = <&twl_gpio 13 GPIO_ACTIVE_LOW>; /* LEDSYNC */
+                default-state = "on";
         };
 };
 
@@ -104,7 +68,3 @@
         non-removable;
 };
 
-&uart2 {
-       pinctrl-names = "default";
-       pinctrl-0 = <&uart2_pins>;
-};