ARM: LPC32xx: DTS files for device tree conversion

This patch adds the dts files for the reference machine of LPC32xx:

* arch/arm/boot/dts/lpc32xx.dtsi: Include for devices based on LPC32xx
* arch/arm/boot/dts/phy3250.dts: Board support for PHYTEC phyCORE-LPC3250

Signed-off-by: Roland Stigge <stigge@antcom.de>

1 files changed, 292 insertions, 0 deletions

diff --git a/arch/arm/boot/dts/lpc32xx.dtsi b/arch/arm/boot/dts/lpc32xx.dtsi
new file mode 100644
index 000000000000..2d696866f71c
--- /dev/null
+++ b/arch/arm/boot/dts/lpc32xx.dtsi
@@ -0,0 +1,292 @@
+/*
+ * NXP LPC32xx SoC
+ *
+ * Copyright 2012 Roland Stigge <stigge@antcom.de>
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+/include/ "skeleton.dtsi"
+
+/ {
+        compatible = "nxp,lpc3220";
+        interrupt-parent = <&mic>;
+
+        cpus {
+                cpu@0 {
+                        compatible = "arm,arm926ejs";
+                };
+        };
+
+        ahb {
+                #address-cells = <1>;
+                #size-cells = <1>;
+                compatible = "simple-bus";
+                ranges = <0x20000000 0x20000000 0x30000000>;
+
+                /*
+                 * Enable either SLC or MLC
+                 */
+                slc: flash@20020000 {
+                        compatible = "nxp,lpc3220-slc";
+                        reg = <0x20020000 0x1000>;
+                        status = "disable";
+                };
+
+                mlc: flash@200B0000 {
+                        compatible = "nxp,lpc3220-mlc";
+                        reg = <0x200B0000 0x1000>;
+                        status = "disable";
+                };
+
+                dma@31000000 {
+                        compatible = "arm,pl080", "arm,primecell";
+                        reg = <0x31000000 0x1000>;
+                        interrupts = <0x1c 0>;
+                };
+
+                /*
+                 * Enable either ohci or usbd (gadget)!
+                 */
+                ohci@31020000 {
+                        compatible = "nxp,ohci-nxp", "usb-ohci";
+                        reg = <0x31020000 0x300>;
+                        interrupts = <0x3b 0>;
+                        status = "disable";
+                };
+
+                usbd@31020000 {
+                        compatible = "nxp,lpc3220-udc";
+                        reg = <0x31020000 0x300>;
+                        interrupts = <0x3d 0>, <0x3e 0>, <0x3c 0>, <0x3a 0>;
+                        status = "disable";
+                };
+
+                clcd@31040000 {
+                        compatible = "arm,pl110", "arm,primecell";
+                        reg = <0x31040000 0x1000>;
+                        interrupts = <0x0e 0>;
+                        status = "disable";
+                };
+
+                mac: ethernet@31060000 {
+                        compatible = "nxp,lpc-eth";
+                        reg = <0x31060000 0x1000>;
+                        interrupts = <0x1d 0>;
+                };
+
+                apb {
+                        #address-cells = <1>;
+                        #size-cells = <1>;
+                        compatible = "simple-bus";
+                        ranges = <0x20000000 0x20000000 0x30000000>;
+
+                        ssp0: ssp@20084000 {
+                                compatible = "arm,pl022", "arm,primecell";
+                                reg = <0x20084000 0x1000>;
+                                interrupts = <0x14 0>;
+                        };
+
+                        spi1: spi@20088000 {
+                                compatible = "nxp,lpc3220-spi";
+                                reg = <0x20088000 0x1000>;
+                        };
+
+                        ssp1: ssp@2008c000 {
+                                compatible = "arm,pl022", "arm,primecell";
+                                reg = <0x2008c000 0x1000>;
+                                interrupts = <0x15 0>;
+                        };
+
+                        spi2: spi@20090000 {
+                                compatible = "nxp,lpc3220-spi";
+                                reg = <0x20090000 0x1000>;
+                        };
+
+                        i2s0: i2s@20094000 {
+                                compatible = "nxp,lpc3220-i2s";
+                                reg = <0x20094000 0x1000>;
+                        };
+
+                        sd@20098000 {
+                                compatible = "arm,pl180", "arm,primecell";
+                                reg = <0x20098000 0x1000>;
+                                interrupts = <0x0f 0>, <0x0d 0>;
+                        };
+
+                        i2s1: i2s@2009C000 {
+                                compatible = "nxp,lpc3220-i2s";
+                                reg = <0x2009C000 0x1000>;
+                        };
+
+                        uart3: serial@40080000 {
+                                compatible = "nxp,serial";
+                                reg = <0x40080000 0x1000>;
+                        };
+
+                        uart4: serial@40088000 {
+                                compatible = "nxp,serial";
+                                reg = <0x40088000 0x1000>;
+                        };
+
+                        uart5: serial@40090000 {
+                                compatible = "nxp,serial";
+                                reg = <0x40090000 0x1000>;
+                        };
+
+                        uart6: serial@40098000 {
+                                compatible = "nxp,serial";
+                                reg = <0x40098000 0x1000>;
+                        };
+
+                        i2c1: i2c@400A0000 {
+                                compatible = "nxp,pnx-i2c";
+                                reg = <0x400A0000 0x100>;
+                                interrupts = <0x33 0>;
+                                #address-cells = <1>;
+                                #size-cells = <0>;
+                                pnx,timeout = <0x64>;
+                        };
+
+                        i2c2: i2c@400A8000 {
+                                compatible = "nxp,pnx-i2c";
+                                reg = <0x400A8000 0x100>;
+                                interrupts = <0x32 0>;
+                                #address-cells = <1>;
+                                #size-cells = <0>;
+                                pnx,timeout = <0x64>;
+                        };
+
+                        i2cusb: i2c@31020300 {
+                                compatible = "nxp,pnx-i2c";
+                                reg = <0x31020300 0x100>;
+                                interrupts = <0x3f 0>;
+                                #address-cells = <1>;
+                                #size-cells = <0>;
+                                pnx,timeout = <0x64>;
+                        };
+                };
+
+                fab {
+                        #address-cells = <1>;
+                        #size-cells = <1>;
+                        compatible = "simple-bus";
+                        ranges = <0x20000000 0x20000000 0x30000000>;
+
+                        /*
+                         * MIC Interrupt controller includes:
+                         *   MIC @40008000
+                         *   SIC1 @4000C000
+                         *   SIC2 @40010000
+                         */
+                        mic: interrupt-controller@40008000 {
+                                compatible = "nxp,lpc3220-mic";
+                                interrupt-controller;
+                                reg = <0x40008000 0xC000>;
+                                #interrupt-cells = <2>;
+                        };
+
+                        uart1: serial@40014000 {
+                                compatible = "nxp,serial";
+                                reg = <0x40014000 0x1000>;
+                        };
+
+                        uart2: serial@40018000 {
+                                compatible = "nxp,serial";
+                                reg = <0x40018000 0x1000>;
+                        };
+
+                        uart7: serial@4001C000 {
+                                compatible = "nxp,serial";
+                                reg = <0x4001C000 0x1000>;
+                        };
+
+                        rtc@40024000 {
+                                compatible = "nxp,lpc3220-rtc";
+                                reg = <0x40024000 0x1000>;
+                                interrupts = <0x34 0>;
+                        };
+
+                        gpio: gpio@40028000 {
+                                compatible = "nxp,lpc3220-gpio";
+                                reg = <0x40028000 0x1000>;
+                                /* create a private address space for enumeration */
+                                #address-cells = <1>;
+                                #size-cells = <0>;
+
+                                gpio_p0: gpio-bank@0 {
+                                        gpio-controller;
+                                        #gpio-cells = <2>;
+                                        reg = <0>;
+                                };
+
+                                gpio_p1: gpio-bank@1 {
+                                        gpio-controller;
+                                        #gpio-cells = <2>;
+                                        reg = <1>;
+                                };
+
+                                gpio_p2: gpio-bank@2 {
+                                        gpio-controller;
+                                        #gpio-cells = <2>;
+                                        reg = <2>;
+                                };
+
+                                gpio_p3: gpio-bank@3 {
+                                        gpio-controller;
+                                        #gpio-cells = <2>;
+                                        reg = <3>;
+                                };
+
+                                gpi_p3: gpio-bank@4 {
+                                        gpio-controller;
+                                        #gpio-cells = <2>;
+                                        reg = <4>;
+                                };
+
+                                gpo_p3: gpio-bank@5 {
+                                        gpio-controller;
+                                        #gpio-cells = <2>;
+                                        reg = <5>;
+                                };
+                        };
+
+                        watchdog@4003C000 {
+                                compatible = "nxp,pnx4008-wdt";
+                                reg = <0x4003C000 0x1000>;
+                        };
+
+                        /*
+                         * TSC vs. ADC: Since those two share the same
+                         * hardware, you need to choose from one of the
+                         * following two and do 'status = "okay";' for one of
+                         * them
+                         */
+
+                        adc@40048000 {
+                                compatible = "nxp,lpc3220-adc";
+                                reg = <0x40048000 0x1000>;
+                                interrupts = <0x27 0>;
+                                status = "disable";
+                        };
+
+                        tsc@40048000 {
+                                compatible = "nxp,lpc3220-tsc";
+                                reg = <0x40048000 0x1000>;
+                                interrupts = <0x27 0>;
+                                status = "disable";
+                        };
+
+                        key@40050000 {
+                                compatible = "nxp,lpc3220-key";
+                                reg = <0x40050000 0x1000>;
+                        };
+
+                };
+        };
+};