ARM: dts: imx6q-sabrelite: add ecspi1 pinctrl support

Imx6q sabrelite board uses ecspi1 to connect a spi flash sst25vf016b,
we need to add pinctrl information for it in the dts, otherwise the
ecspi1 driver can't work and the connected flash is wrongly
detected as a mr25h256 flash like this:

m25p80 spi32766.0: found mr25h256, expected sst25vf016b
m25p80 spi32766.0: mr25h256 (32 Kbytes)

Cc: Richard Zhao <richard.zhao@freescale.com>
Signed-off-by: Hui Wang <jason77.wang@gmail.com>
Signed-off-by: Shawn Guo <shawn.guo@linaro.org>

1 files changed, 3 insertions, 0 deletions

diff --git a/arch/arm/boot/dts/imx6q-sabrelite.dts b/arch/arm/boot/dts/imx6q-sabrelite.dts
index 46fdfd1d5cd1..d42e851ceb97 100644
--- a/arch/arm/boot/dts/imx6q-sabrelite.dts
+++ b/arch/arm/boot/dts/imx6q-sabrelite.dts
@@ -27,6 +27,8 @@
                                 ecspi@02008000 { /* eCSPI1 */
                                         fsl,spi-num-chipselects = <1>;
                                         cs-gpios = <&gpio3 19 0>;
+                                        pinctrl-names = "default";
+                                        pinctrl-0 = <&pinctrl_ecspi1_1>;
                                         status = "okay";
 
                                         flash: m25p80@0 {
@@ -50,6 +52,7 @@
                                         pinctrl_gpio_hog: gpiohog {
                                                 fsl,pins = <
                                                            144  0x80000000      /* MX6Q_PAD_EIM_D22__GPIO_3_22 */
+                                                           121  0x80000000      /* MX6Q_PAD_EIM_D19__GPIO_3_19 */
                                                            >;
                                         };
                                 };