ARM: at91/at91-ariag25.dts: UART0/1 nodes are disabled

UART0 is moved to generic at91sam9x5.dtsi file.
Both uarts are "disabled" as the corresponding pins on
Aria documentation are shown as GPIOs.

Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>

1 files changed, 11 insertions, 6 deletions

diff --git a/arch/arm/boot/dts/at91-ariag25.dts b/arch/arm/boot/dts/at91-ariag25.dts
index a76ea94246a1..cce45f5177f9 100644
--- a/arch/arm/boot/dts/at91-ariag25.dts
+++ b/arch/arm/boot/dts/at91-ariag25.dts
@@ -21,6 +21,7 @@
                 serial3 = &usart2;
                 serial4 = &usart3;
                 serial5 = &uart0;
+                serial6 = &uart1;
         };
 
         chosen {
@@ -112,13 +113,17 @@
                                 status = "okay";
                         };
 
+                        /*
+                         * UART0/1 pins are marked as GPIO on
+                         * Aria documentation.
+                         * Change to "okay" if you need additional serial ports
+                         */
                         uart0: serial@f8040000 {
-                                compatible = "atmel,at91sam9260-usart";
-                                reg = <0xf8040000 0x200>;
-                                interrupts = <15 4 5>;
-                                pinctrl-names = "default";
-                                pinctrl-0 = <&pinctrl_uart0>;
-                                status = "okay";
+                                status = "disabled";
+                        };
+
+                        uart1: serial@f8044000 {
+                                status = "disabled";
                         };
 
                         adc0: adc@f804c000 {