Linux-2.6.12-rc2v2.6.12-rc2

Initial git repository build. I'm not bothering with the full history,
even though we have it. We can create a separate "historical" git
archive of that later if we want to, and in the meantime it's about
3.2GB when imported into git - space that would just make the early
git days unnecessarily complicated, when we don't have a lot of good
infrastructure for it.

Let it rip!

1 files changed, 339 insertions, 0 deletions

diff --git a/arch/alpha/lib/strncpy_from_user.S b/arch/alpha/lib/strncpy_from_user.S
new file mode 100644
index 000000000000..73ee21160ff7
--- /dev/null
+++ b/arch/alpha/lib/strncpy_from_user.S
@@ -0,0 +1,339 @@
+/*
+ * arch/alpha/lib/strncpy_from_user.S
+ * Contributed by Richard Henderson (rth@tamu.edu)
+ *
+ * Just like strncpy except in the return value:
+ *
+ * -EFAULT       if an exception occurs before the terminator is copied.
+ * N             if the buffer filled.
+ *
+ * Otherwise the length of the string is returned.
+ */
+
+
+#include <asm/errno.h>
+#include <asm/regdef.h>
+
+
+/* Allow an exception for an insn; exit if we get one.  */
+#define EX(x,y...)                      \
+        99: x,##y;                      \
+        .section __ex_table,"a";        \
+        .long 99b - .;                  \
+        lda $31, $exception-99b($0);    \
+        .previous
+
+
+        .set noat
+        .set noreorder
+        .text
+
+        .globl __strncpy_from_user
+        .ent __strncpy_from_user
+        .frame $30, 0, $26
+        .prologue 0
+
+        .align 3
+$aligned:
+        /* On entry to this basic block:
+           t0 == the first destination word for masking back in
+           t1 == the first source word.  */
+
+        /* Create the 1st output word and detect 0's in the 1st input word.  */
+        lda     t2, -1          # e1    : build a mask against false zero
+        mskqh   t2, a1, t2      # e0    :   detection in the src word
+        mskqh   t1, a1, t3      # e0    :
+        ornot   t1, t2, t2      # .. e1 :
+        mskql   t0, a1, t0      # e0    : assemble the first output word
+        cmpbge  zero, t2, t8    # .. e1 : bits set iff null found
+        or      t0, t3, t0      # e0    :
+        beq     a2, $a_eoc      # .. e1 :
+        bne     t8, $a_eos      # .. e1 :
+
+        /* On entry to this basic block:
+           t0 == a source word not containing a null.  */
+
+$a_loop:
+        stq_u   t0, 0(a0)       # e0    :
+        addq    a0, 8, a0       # .. e1 :
+        EX( ldq_u t0, 0(a1) )   # e0    :
+        addq    a1, 8, a1       # .. e1 :
+        subq    a2, 1, a2       # e0    :
+        cmpbge  zero, t0, t8    # .. e1 (stall)
+        beq     a2, $a_eoc      # e1    :
+        beq     t8, $a_loop     # e1    :
+
+        /* Take care of the final (partial) word store.  At this point
+           the end-of-count bit is set in t8 iff it applies.
+
+           On entry to this basic block we have:
+           t0 == the source word containing the null
+           t8 == the cmpbge mask that found it.  */
+
+$a_eos:
+        negq    t8, t12         # e0    : find low bit set
+        and     t8, t12, t12    # e1 (stall)
+
+        /* For the sake of the cache, don't read a destination word
+           if we're not going to need it.  */
+        and     t12, 0x80, t6   # e0    :
+        bne     t6, 1f          # .. e1 (zdb)
+
+        /* We're doing a partial word store and so need to combine
+           our source and original destination words.  */
+        ldq_u   t1, 0(a0)       # e0    :
+        subq    t12, 1, t6      # .. e1 :
+        or      t12, t6, t8     # e0    :
+        unop                    #
+        zapnot  t0, t8, t0      # e0    : clear src bytes > null
+        zap     t1, t8, t1      # .. e1 : clear dst bytes <= null
+        or      t0, t1, t0      # e1    :
+
+1:      stq_u   t0, 0(a0)
+        br      $finish_up
+
+        /* Add the end-of-count bit to the eos detection bitmask.  */
+$a_eoc:
+        or      t10, t8, t8
+        br      $a_eos
+
+        /*** The Function Entry Point ***/
+        .align 3
+__strncpy_from_user:
+        mov     a0, v0          # save the string start
+        beq     a2, $zerolength
+
+        /* Are source and destination co-aligned?  */
+        xor     a0, a1, t1      # e0    :
+        and     a0, 7, t0       # .. e1 : find dest misalignment
+        and     t1, 7, t1       # e0    :
+        addq    a2, t0, a2      # .. e1 : bias count by dest misalignment
+        subq    a2, 1, a2       # e0    :
+        and     a2, 7, t2       # e1    :
+        srl     a2, 3, a2       # e0    : a2 = loop counter = (count - 1)/8
+        addq    zero, 1, t10    # .. e1 :
+        sll     t10, t2, t10    # e0    : t10 = bitmask of last count byte
+        bne     t1, $unaligned  # .. e1 :
+
+        /* We are co-aligned; take care of a partial first word.  */
+
+        EX( ldq_u t1, 0(a1) )   # e0    : load first src word
+        addq    a1, 8, a1       # .. e1 :
+
+        beq     t0, $aligned    # avoid loading dest word if not needed
+        ldq_u   t0, 0(a0)       # e0    :
+        br      $aligned        # .. e1 :
+
+
+/* The source and destination are not co-aligned.  Align the destination
+   and cope.  We have to be very careful about not reading too much and
+   causing a SEGV.  */
+
+        .align 3
+$u_head:
+        /* We know just enough now to be able to assemble the first
+           full source word.  We can still find a zero at the end of it
+           that prevents us from outputting the whole thing.
+
+           On entry to this basic block:
+           t0 == the first dest word, unmasked
+           t1 == the shifted low bits of the first source word
+           t6 == bytemask that is -1 in dest word bytes */
+
+        EX( ldq_u t2, 8(a1) )   # e0    : load second src word
+        addq    a1, 8, a1       # .. e1 :
+        mskql   t0, a0, t0      # e0    : mask trailing garbage in dst
+        extqh   t2, a1, t4      # e0    :
+        or      t1, t4, t1      # e1    : first aligned src word complete
+        mskqh   t1, a0, t1      # e0    : mask leading garbage in src
+        or      t0, t1, t0      # e0    : first output word complete
+        or      t0, t6, t6      # e1    : mask original data for zero test
+        cmpbge  zero, t6, t8    # e0    :
+        beq     a2, $u_eocfin   # .. e1 :
+        bne     t8, $u_final    # e1    :
+
+        lda     t6, -1                  # e1    : mask out the bits we have
+        mskql   t6, a1, t6              # e0    :   already seen
+        stq_u   t0, 0(a0)               # e0    : store first output word
+        or      t6, t2, t2              # .. e1 :
+        cmpbge  zero, t2, t8            # e0    : find nulls in second partial
+        addq    a0, 8, a0               # .. e1 :
+        subq    a2, 1, a2               # e0    :
+        bne     t8, $u_late_head_exit   # .. e1 :
+
+        /* Finally, we've got all the stupid leading edge cases taken care
+           of and we can set up to enter the main loop.  */
+
+        extql   t2, a1, t1      # e0    : position hi-bits of lo word
+        EX( ldq_u t2, 8(a1) )   # .. e1 : read next high-order source word
+        addq    a1, 8, a1       # e0    :
+        cmpbge  zero, t2, t8    # e1 (stall)
+        beq     a2, $u_eoc      # e1    :
+        bne     t8, $u_eos      # e1    :
+
+        /* Unaligned copy main loop.  In order to avoid reading too much,
+           the loop is structured to detect zeros in aligned source words.
+           This has, unfortunately, effectively pulled half of a loop
+           iteration out into the head and half into the tail, but it does
+           prevent nastiness from accumulating in the very thing we want
+           to run as fast as possible.
+
+           On entry to this basic block:
+           t1 == the shifted high-order bits from the previous source word
+           t2 == the unshifted current source word
+
+           We further know that t2 does not contain a null terminator.  */
+
+        .align 3
+$u_loop:
+        extqh   t2, a1, t0      # e0    : extract high bits for current word
+        addq    a1, 8, a1       # .. e1 :
+        extql   t2, a1, t3      # e0    : extract low bits for next time
+        addq    a0, 8, a0       # .. e1 :
+        or      t0, t1, t0      # e0    : current dst word now complete
+        EX( ldq_u t2, 0(a1) )   # .. e1 : load high word for next time
+        stq_u   t0, -8(a0)      # e0    : save the current word
+        mov     t3, t1          # .. e1 :
+        subq    a2, 1, a2       # e0    :
+        cmpbge  zero, t2, t8    # .. e1 : test new word for eos
+        beq     a2, $u_eoc      # e1    :
+        beq     t8, $u_loop     # e1    :
+
+        /* We've found a zero somewhere in the source word we just read.
+           If it resides in the lower half, we have one (probably partial)
+           word to write out, and if it resides in the upper half, we
+           have one full and one partial word left to write out.
+
+           On entry to this basic block:
+           t1 == the shifted high-order bits from the previous source word
+           t2 == the unshifted current source word.  */
+$u_eos:
+        extqh   t2, a1, t0      # e0    :
+        or      t0, t1, t0      # e1    : first (partial) source word complete
+
+        cmpbge  zero, t0, t8    # e0    : is the null in this first bit?
+        bne     t8, $u_final    # .. e1 (zdb)
+
+        stq_u   t0, 0(a0)       # e0    : the null was in the high-order bits
+        addq    a0, 8, a0       # .. e1 :
+        subq    a2, 1, a2       # e1    :
+
+$u_late_head_exit:
+        extql   t2, a1, t0      # .. e0 :
+        cmpbge  zero, t0, t8    # e0    :
+        or      t8, t10, t6     # e1    :
+        cmoveq  a2, t6, t8      # e0    :
+        nop                     # .. e1 :
+
+        /* Take care of a final (probably partial) result word.
+           On entry to this basic block:
+           t0 == assembled source word
+           t8 == cmpbge mask that found the null.  */
+$u_final:
+        negq    t8, t6          # e0    : isolate low bit set
+        and     t6, t8, t12     # e1    :
+
+        and     t12, 0x80, t6   # e0    : avoid dest word load if we can
+        bne     t6, 1f          # .. e1 (zdb)
+
+        ldq_u   t1, 0(a0)       # e0    :
+        subq    t12, 1, t6      # .. e1 :
+        or      t6, t12, t8     # e0    :
+        zapnot  t0, t8, t0      # .. e1 : kill source bytes > null
+        zap     t1, t8, t1      # e0    : kill dest bytes <= null
+        or      t0, t1, t0      # e1    :
+
+1:      stq_u   t0, 0(a0)       # e0    :
+        br      $finish_up
+
+$u_eoc:                         # end-of-count
+        extqh   t2, a1, t0
+        or      t0, t1, t0
+        cmpbge  zero, t0, t8
+
+$u_eocfin:                      # end-of-count, final word
+        or      t10, t8, t8
+        br      $u_final
+
+        /* Unaligned copy entry point.  */
+        .align 3
+$unaligned:
+
+        EX( ldq_u t1, 0(a1) )   # e0    : load first source word
+
+        and     a0, 7, t4       # .. e1 : find dest misalignment
+        and     a1, 7, t5       # e0    : find src misalignment
+
+        /* Conditionally load the first destination word and a bytemask
+           with 0xff indicating that the destination byte is sacrosanct.  */
+
+        mov     zero, t0        # .. e1 :
+        mov     zero, t6        # e0    :
+        beq     t4, 1f          # .. e1 :
+        ldq_u   t0, 0(a0)       # e0    :
+        lda     t6, -1          # .. e1 :
+        mskql   t6, a0, t6      # e0    :
+1:
+        subq    a1, t4, a1      # .. e1 : sub dest misalignment from src addr
+
+        /* If source misalignment is larger than dest misalignment, we need
+           extra startup checks to avoid SEGV.  */
+
+        cmplt   t4, t5, t12     # e1    :
+        extql   t1, a1, t1      # .. e0 : shift src into place
+        lda     t2, -1          # e0    : for creating masks later
+        beq     t12, $u_head    # e1    :
+
+        mskqh   t2, t5, t2      # e0    : begin src byte validity mask
+        cmpbge  zero, t1, t8    # .. e1 : is there a zero?
+        extql   t2, a1, t2      # e0    :
+        or      t8, t10, t5     # .. e1 : test for end-of-count too
+        cmpbge  zero, t2, t3    # e0    :
+        cmoveq  a2, t5, t8      # .. e1 :
+        andnot  t8, t3, t8      # e0    :
+        beq     t8, $u_head     # .. e1 (zdb)
+
+        /* At this point we've found a zero in the first partial word of
+           the source.  We need to isolate the valid source data and mask
+           it into the original destination data.  (Incidentally, we know
+           that we'll need at least one byte of that original dest word.) */
+
+        ldq_u   t0, 0(a0)       # e0    :
+        negq    t8, t6          # .. e1 : build bitmask of bytes <= zero
+        mskqh   t1, t4, t1      # e0    :
+        and     t6, t8, t12     # .. e1 :
+        subq    t12, 1, t6      # e0    :
+        or      t6, t12, t8     # e1    :
+
+        zapnot  t2, t8, t2      # e0    : prepare source word; mirror changes
+        zapnot  t1, t8, t1      # .. e1 : to source validity mask
+
+        andnot  t0, t2, t0      # e0    : zero place for source to reside
+        or      t0, t1, t0      # e1    : and put it there
+        stq_u   t0, 0(a0)       # e0    :
+
+$finish_up:
+        zapnot  t0, t12, t4     # was last byte written null?
+        cmovne  t4, 1, t4
+
+        and     t12, 0xf0, t3   # binary search for the address of the
+        and     t12, 0xcc, t2   # last byte written
+        and     t12, 0xaa, t1
+        bic     a0, 7, t0
+        cmovne  t3, 4, t3
+        cmovne  t2, 2, t2
+        cmovne  t1, 1, t1
+        addq    t0, t3, t0
+        addq    t1, t2, t1
+        addq    t0, t1, t0
+        addq    t0, t4, t0      # add one if we filled the buffer
+
+        subq    t0, v0, v0      # find string length
+        ret
+
+$zerolength:
+        clr     v0
+$exception:
+        ret
+
+        .end __strncpy_from_user