Merge tag 'v3.5-rc7' into arm/tegra

This solves the merge conflicts while creating the next
branch.

Linux 3.5-rc7

Conflicts:
	drivers/iommu/tegra-smmu.c

21 files changed, 204 insertions, 138 deletions

diff --git a/Documentation/ABI/testing/sysfs-block-rssd b/Documentation/ABI/testing/sysfs-block-rssd
index 679ce3543122..beef30c046b0 100644
--- a/Documentation/ABI/testing/sysfs-block-rssd
+++ b/Documentation/ABI/testing/sysfs-block-rssd
@@ -1,26 +1,5 @@
-What:           /sys/block/rssd*/registers
-Date:           March 2012
-KernelVersion:  3.3
-Contact:        Asai Thambi S P <asamymuthupa@micron.com>
-Description:    This is a read-only file. Dumps below driver information and
-                hardware registers.
-                    - S ACTive
-                    - Command Issue
-                    - Completed
-                    - PORT IRQ STAT
-                    - HOST IRQ STAT
-                    - Allocated
-                    - Commands in Q
-
 What:           /sys/block/rssd*/status
 Date:           April 2012
 KernelVersion:  3.4
 Contact:        Asai Thambi S P <asamymuthupa@micron.com>
 Description:    This is a read-only file. Indicates the status of the device.
-
-What:           /sys/block/rssd*/flags
-Date:           May 2012
-KernelVersion:  3.5
-Contact:        Asai Thambi S P <asamymuthupa@micron.com>
-Description:    This is a read-only file. Dumps the flags in port and driver
-                data structure
diff --git a/Documentation/ABI/testing/sysfs-bus-iio b/Documentation/ABI/testing/sysfs-bus-iio
index 5bc8a476c15e..cfedf63cce15 100644
--- a/Documentation/ABI/testing/sysfs-bus-iio
+++ b/Documentation/ABI/testing/sysfs-bus-iio
@@ -219,6 +219,7 @@ What:		/sys/bus/iio/devices/iio:deviceX/in_voltageY_scale
 What:           /sys/bus/iio/devices/iio:deviceX/in_voltageY_supply_scale
 What:           /sys/bus/iio/devices/iio:deviceX/in_voltage_scale
 What:           /sys/bus/iio/devices/iio:deviceX/out_voltageY_scale
+What:           /sys/bus/iio/devices/iio:deviceX/out_altvoltageY_scale
 What:           /sys/bus/iio/devices/iio:deviceX/in_accel_scale
 What:           /sys/bus/iio/devices/iio:deviceX/in_accel_peak_scale
 What:           /sys/bus/iio/devices/iio:deviceX/in_anglvel_scale
@@ -273,6 +274,7 @@ What:		/sys/bus/iio/devices/iio:deviceX/in_accel_scale_available
 What:           /sys/.../iio:deviceX/in_voltageX_scale_available
 What:           /sys/.../iio:deviceX/in_voltage-voltage_scale_available
 What:           /sys/.../iio:deviceX/out_voltageX_scale_available
+What:           /sys/.../iio:deviceX/out_altvoltageX_scale_available
 What:           /sys/.../iio:deviceX/in_capacitance_scale_available
 KernelVersion:  2.635
 Contact:        linux-iio@vger.kernel.org
@@ -298,14 +300,19 @@ Description:
                 gives the 3dB frequency of the filter in Hz.
 
 What:           /sys/bus/iio/devices/iio:deviceX/out_voltageY_raw
+What:           /sys/bus/iio/devices/iio:deviceX/out_altvoltageY_raw
 KernelVersion:  2.6.37
 Contact:        linux-iio@vger.kernel.org
 Description:
                 Raw (unscaled, no bias etc.) output voltage for
                 channel Y.  The number must always be specified and
                 unique if the output corresponds to a single channel.
+                While DAC like devices typically use out_voltage,
+                a continuous frequency generating device, such as
+                a DDS or PLL should use out_altvoltage.
 
 What:           /sys/bus/iio/devices/iio:deviceX/out_voltageY&Z_raw
+What:           /sys/bus/iio/devices/iio:deviceX/out_altvoltageY&Z_raw
 KernelVersion:  2.6.37
 Contact:        linux-iio@vger.kernel.org
 Description:
@@ -316,6 +323,8 @@ Description:
 
 What:           /sys/bus/iio/devices/iio:deviceX/out_voltageY_powerdown_mode
 What:           /sys/bus/iio/devices/iio:deviceX/out_voltage_powerdown_mode
+What:           /sys/bus/iio/devices/iio:deviceX/out_altvoltageY_powerdown_mode
+What:           /sys/bus/iio/devices/iio:deviceX/out_altvoltage_powerdown_mode
 KernelVersion:  2.6.38
 Contact:        linux-iio@vger.kernel.org
 Description:
@@ -330,6 +339,8 @@ Description:
 
 What:           /sys/.../iio:deviceX/out_votlageY_powerdown_mode_available
 What:           /sys/.../iio:deviceX/out_voltage_powerdown_mode_available
+What:           /sys/.../iio:deviceX/out_altvotlageY_powerdown_mode_available
+What:           /sys/.../iio:deviceX/out_altvoltage_powerdown_mode_available
 KernelVersion:  2.6.38
 Contact:        linux-iio@vger.kernel.org
 Description:
@@ -338,6 +349,8 @@ Description:
 
 What:           /sys/bus/iio/devices/iio:deviceX/out_voltageY_powerdown
 What:           /sys/bus/iio/devices/iio:deviceX/out_voltage_powerdown
+What:           /sys/bus/iio/devices/iio:deviceX/out_altvoltageY_powerdown
+What:           /sys/bus/iio/devices/iio:deviceX/out_altvoltage_powerdown
 KernelVersion:  2.6.38
 Contact:        linux-iio@vger.kernel.org
 Description:
@@ -346,6 +359,24 @@ Description:
                 normal operation. Y may be suppressed if all outputs are
                 controlled together.
 
+What:           /sys/bus/iio/devices/iio:deviceX/out_altvoltageY_frequency
+KernelVersion:  3.4.0
+Contact:        linux-iio@vger.kernel.org
+Description:
+                Output frequency for channel Y in Hz. The number must always be
+                specified and unique if the output corresponds to a single
+                channel.
+
+What:           /sys/bus/iio/devices/iio:deviceX/out_altvoltageY_phase
+KernelVersion:  3.4.0
+Contact:        linux-iio@vger.kernel.org
+Description:
+                Phase in radians of one frequency/clock output Y
+                (out_altvoltageY) relative to another frequency/clock output
+                (out_altvoltageZ) of the device X. The number must always be
+                specified and unique if the output corresponds to a single
+                channel.
+
 What:           /sys/bus/iio/devices/iio:deviceX/events
 KernelVersion:  2.6.35
 Contact:        linux-iio@vger.kernel.org
diff --git a/Documentation/ABI/testing/sysfs-class-mtd b/Documentation/ABI/testing/sysfs-class-mtd
index db1ad7e34fc3..938ef71e2035 100644
--- a/Documentation/ABI/testing/sysfs-class-mtd
+++ b/Documentation/ABI/testing/sysfs-class-mtd
@@ -142,13 +142,14 @@ KernelVersion:	3.4
 Contact:        linux-mtd@lists.infradead.org
 Description:
                 This allows the user to examine and adjust the criteria by which
-                mtd returns -EUCLEAN from mtd_read().  If the maximum number of
-                bit errors that were corrected on any single region comprising
-                an ecc step (as reported by the driver) equals or exceeds this
-                value, -EUCLEAN is returned.  Otherwise, absent an error, 0 is
-                returned.  Higher layers (e.g., UBI) use this return code as an
-                indication that an erase block may be degrading and should be
-                scrutinized as a candidate for being marked as bad.
+                mtd returns -EUCLEAN from mtd_read() and mtd_read_oob().  If the
+                maximum number of bit errors that were corrected on any single
+                region comprising an ecc step (as reported by the driver) equals
+                or exceeds this value, -EUCLEAN is returned.  Otherwise, absent
+                an error, 0 is returned.  Higher layers (e.g., UBI) use this
+                return code as an indication that an erase block may be
+                degrading and should be scrutinized as a candidate for being
+                marked as bad.
 
                 The initial value may be specified by the flash device driver.
                 If not, then the default value is ecc_strength.
@@ -167,7 +168,7 @@ Description:
                 block degradation, but high enough to avoid the consequences of
                 a persistent return value of -EUCLEAN on devices where sticky
                 bitflips occur.  Note that if bitflip_threshold exceeds
-                ecc_strength, -EUCLEAN is never returned by mtd_read().
+                ecc_strength, -EUCLEAN is never returned by the read operations.
                 Conversely, if bitflip_threshold is zero, -EUCLEAN is always
                 returned, absent a hard error.
 
diff --git a/Documentation/DocBook/media/v4l/controls.xml b/Documentation/DocBook/media/v4l/controls.xml
index 676bc46f9c52..cda0dfb6769a 100644
--- a/Documentation/DocBook/media/v4l/controls.xml
+++ b/Documentation/DocBook/media/v4l/controls.xml
@@ -3988,7 +3988,7 @@ interface and may change in the future.</para>
             from RGB to Y'CbCr color space.
             </entry>
           </row>
-          <row id = "v4l2-jpeg-chroma-subsampling">
+          <row>
             <entrytbl spanname="descr" cols="2">
               <tbody valign="top">
                 <row>
diff --git a/Documentation/DocBook/media/v4l/pixfmt.xml b/Documentation/DocBook/media/v4l/pixfmt.xml
index f5ac15ed0549..e58934c92895 100644
--- a/Documentation/DocBook/media/v4l/pixfmt.xml
+++ b/Documentation/DocBook/media/v4l/pixfmt.xml
@@ -986,13 +986,13 @@ http://www.thedirks.org/winnov/</ulink></para></entry>
           <row id="V4L2-PIX-FMT-Y4">
             <entry><constant>V4L2_PIX_FMT_Y4</constant></entry>
             <entry>'Y04 '</entry>
-            <entry>Old 4-bit greyscale format. Only the least significant 4 bits of each byte are used,
+            <entry>Old 4-bit greyscale format. Only the most significant 4 bits of each byte are used,
 the other bits are set to 0.</entry>
           </row>
           <row id="V4L2-PIX-FMT-Y6">
             <entry><constant>V4L2_PIX_FMT_Y6</constant></entry>
             <entry>'Y06 '</entry>
-            <entry>Old 6-bit greyscale format. Only the least significant 6 bits of each byte are used,
+            <entry>Old 6-bit greyscale format. Only the most significant 6 bits of each byte are used,
 the other bits are set to 0.</entry>
           </row>
         </tbody>
diff --git a/Documentation/DocBook/media/v4l/v4l2.xml b/Documentation/DocBook/media/v4l/v4l2.xml
index 015c561754b7..008c2d73a484 100644
--- a/Documentation/DocBook/media/v4l/v4l2.xml
+++ b/Documentation/DocBook/media/v4l/v4l2.xml
@@ -560,6 +560,7 @@ and discussions on the V4L mailing list.</revremark>
     &sub-g-tuner;
     &sub-log-status;
     &sub-overlay;
+    &sub-prepare-buf;
     &sub-qbuf;
     &sub-querybuf;
     &sub-querycap;
@@ -567,7 +568,6 @@ and discussions on the V4L mailing list.</revremark>
     &sub-query-dv-preset;
     &sub-query-dv-timings;
     &sub-querystd;
-    &sub-prepare-buf;
     &sub-reqbufs;
     &sub-s-hw-freq-seek;
     &sub-streamon;
diff --git a/Documentation/DocBook/media/v4l/vidioc-create-bufs.xml b/Documentation/DocBook/media/v4l/vidioc-create-bufs.xml
index 765549ff8a71..a2474ecb574a 100644
--- a/Documentation/DocBook/media/v4l/vidioc-create-bufs.xml
+++ b/Documentation/DocBook/media/v4l/vidioc-create-bufs.xml
@@ -108,10 +108,9 @@ information.</para>
 /></entry>
           </row>
           <row>
-            <entry>__u32</entry>
+            <entry>struct&nbsp;v4l2_format</entry>
             <entry><structfield>format</structfield></entry>
-            <entry>Filled in by the application, preserved by the driver.
-            See <xref linkend="v4l2-format" />.</entry>
+            <entry>Filled in by the application, preserved by the driver.</entry>
           </row>
           <row>
             <entry>__u32</entry>
diff --git a/Documentation/DocBook/media/v4l/vidioc-dqevent.xml b/Documentation/DocBook/media/v4l/vidioc-dqevent.xml
index e8714aa16433..98a856f9ec30 100644
--- a/Documentation/DocBook/media/v4l/vidioc-dqevent.xml
+++ b/Documentation/DocBook/media/v4l/vidioc-dqevent.xml
@@ -89,7 +89,7 @@
           <row>
             <entry></entry>
             <entry>&v4l2-event-frame-sync;</entry>
-            <entry><structfield>frame</structfield></entry>
+            <entry><structfield>frame_sync</structfield></entry>
             <entry>Event data for event V4L2_EVENT_FRAME_SYNC.</entry>
           </row>
           <row>
diff --git a/Documentation/DocBook/media/v4l/vidioc-g-ext-ctrls.xml b/Documentation/DocBook/media/v4l/vidioc-g-ext-ctrls.xml
index e3d5afcdafbb..0a4b90fcf2da 100644
--- a/Documentation/DocBook/media/v4l/vidioc-g-ext-ctrls.xml
+++ b/Documentation/DocBook/media/v4l/vidioc-g-ext-ctrls.xml
@@ -284,13 +284,6 @@ These controls are described in <xref
             processing controls. These controls are described in <xref
             linkend="image-process-controls" />.</entry>
           </row>
-          <row>
-            <entry><constant>V4L2_CTRL_CLASS_JPEG</constant></entry>
-            <entry>0x9d0000</entry>
-            <entry>The class containing JPEG compression controls.
-These controls are described in <xref
-                linkend="jpeg-controls" />.</entry>
-          </row>
         </tbody>
       </tgroup>
     </table>
diff --git a/Documentation/arm/SPEAr/overview.txt b/Documentation/arm/SPEAr/overview.txt
index 57aae7765c74..65610bf52ebf 100644
--- a/Documentation/arm/SPEAr/overview.txt
+++ b/Documentation/arm/SPEAr/overview.txt
@@ -60,4 +60,4 @@ Introduction
   Document Author
   ---------------
 
-  Viresh Kumar <viresh.kumar@st.com>, (c) 2010-2012 ST Microelectronics
+  Viresh Kumar <viresh.linux@gmail.com>, (c) 2010-2012 ST Microelectronics
diff --git a/Documentation/device-mapper/verity.txt b/Documentation/device-mapper/verity.txt
index 32e48797a14f..9884681535ee 100644
--- a/Documentation/device-mapper/verity.txt
+++ b/Documentation/device-mapper/verity.txt
@@ -7,39 +7,39 @@ This target is read-only.
 
 Construction Parameters
 =======================
-    <version> <dev> <hash_dev> <hash_start>
+    <version> <dev> <hash_dev>
     <data_block_size> <hash_block_size>
     <num_data_blocks> <hash_start_block>
     <algorithm> <digest> <salt>
 
 <version>
-    This is the version number of the on-disk format.
+    This is the type of the on-disk hash format.
 
     0 is the original format used in the Chromium OS.
-        The salt is appended when hashing, digests are stored continuously and
-        the rest of the block is padded with zeros.
+      The salt is appended when hashing, digests are stored continuously and
+      the rest of the block is padded with zeros.
 
     1 is the current format that should be used for new devices.
-        The salt is prepended when hashing and each digest is
-        padded with zeros to the power of two.
+      The salt is prepended when hashing and each digest is
+      padded with zeros to the power of two.
 
 <dev>
-    This is the device containing the data the integrity of which needs to be
+    This is the device containing data, the integrity of which needs to be
     checked.  It may be specified as a path, like /dev/sdaX, or a device number,
     <major>:<minor>.
 
 <hash_dev>
-    This is the device that that supplies the hash tree data.  It may be
+    This is the device that supplies the hash tree data.  It may be
     specified similarly to the device path and may be the same device.  If the
-    same device is used, the hash_start should be outside of the dm-verity
-    configured device size.
+    same device is used, the hash_start should be outside the configured
+    dm-verity device.
 
 <data_block_size>
-    The block size on a data device.  Each block corresponds to one digest on
-    the hash device.
+    The block size on a data device in bytes.
+    Each block corresponds to one digest on the hash device.
 
 <hash_block_size>
-    The size of a hash block.
+    The size of a hash block in bytes.
 
 <num_data_blocks>
     The number of data blocks on the data device.  Additional blocks are
@@ -65,7 +65,7 @@ Construction Parameters
 Theory of operation
 ===================
 
-dm-verity is meant to be setup as part of a verified boot path.  This
+dm-verity is meant to be set up as part of a verified boot path.  This
 may be anything ranging from a boot using tboot or trustedgrub to just
 booting from a known-good device (like a USB drive or CD).
 
@@ -73,20 +73,20 @@ When a dm-verity device is configured, it is expected that the caller
 has been authenticated in some way (cryptographic signatures, etc).
 After instantiation, all hashes will be verified on-demand during
 disk access.  If they cannot be verified up to the root node of the
-tree, the root hash, then the I/O will fail.  This should identify
+tree, the root hash, then the I/O will fail.  This should detect
 tampering with any data on the device and the hash data.
 
 Cryptographic hashes are used to assert the integrity of the device on a
-per-block basis.  This allows for a lightweight hash computation on first read
-into the page cache.  Block hashes are stored linearly-aligned to the nearest
-block the size of a page.
+per-block basis. This allows for a lightweight hash computation on first read
+into the page cache. Block hashes are stored linearly, aligned to the nearest
+block size.
 
 Hash Tree
 ---------
 
 Each node in the tree is a cryptographic hash.  If it is a leaf node, the hash
-is of some block data on disk.  If it is an intermediary node, then the hash is
-of a number of child nodes.
+of some data block on disk is calculated. If it is an intermediary node,
+the hash of a number of child nodes is calculated.
 
 Each entry in the tree is a collection of neighboring nodes that fit in one
 block.  The number is determined based on block_size and the size of the
@@ -110,63 +110,23 @@ alg = sha256, num_blocks = 32768, block_size = 4096
 On-disk format
 ==============
 
-Below is the recommended on-disk format. The verity kernel code does not
-read the on-disk header. It only reads the hash blocks which directly
-follow the header. It is expected that a user-space tool will verify the
-integrity of the verity_header and then call dmsetup with the correct
-parameters. Alternatively, the header can be omitted and the dmsetup
-parameters can be passed via the kernel command-line in a rooted chain
-of trust where the command-line is verified.
+The verity kernel code does not read the verity metadata on-disk header.
+It only reads the hash blocks which directly follow the header.
+It is expected that a user-space tool will verify the integrity of the
+verity header.
 
-The on-disk format is especially useful in cases where the hash blocks
-are on a separate partition. The magic number allows easy identification
-of the partition contents. Alternatively, the hash blocks can be stored
-in the same partition as the data to be verified. In such a configuration
-the filesystem on the partition would be sized a little smaller than
-the full-partition, leaving room for the hash blocks.
-
-struct superblock {
-        uint8_t signature[8]
-                "verity\0\0";
-
-        uint8_t version;
-                1 - current format
-
-        uint8_t data_block_bits;
-                log2(data block size)
-
-        uint8_t hash_block_bits;
-                log2(hash block size)
-
-        uint8_t pad1[1];
-                zero padding
-
-        uint16_t salt_size;
-                big-endian salt size
-
-        uint8_t pad2[2];
-                zero padding
-
-        uint32_t data_blocks_hi;
-                big-endian high 32 bits of the 64-bit number of data blocks
-
-        uint32_t data_blocks_lo;
-                big-endian low 32 bits of the 64-bit number of data blocks
-
-        uint8_t algorithm[16];
-                cryptographic algorithm
-
-        uint8_t salt[384];
-                salt (the salt size is specified above)
-
-        uint8_t pad3[88];
-                zero padding to 512-byte boundary
-}
+Alternatively, the header can be omitted and the dmsetup parameters can
+be passed via the kernel command-line in a rooted chain of trust where
+the command-line is verified.
 
 Directly following the header (and with sector number padded to the next hash
 block boundary) are the hash blocks which are stored a depth at a time
 (starting from the root), sorted in order of increasing index.
 
+The full specification of kernel parameters and on-disk metadata format
+is available at the cryptsetup project's wiki page
+  http://code.google.com/p/cryptsetup/wiki/DMVerity
+
 Status
 ======
 V (for Valid) is returned if every check performed so far was valid.
@@ -174,21 +134,22 @@ If any check failed, C (for Corruption) is returned.
 
 Example
 =======
-
-Setup a device:
-  dmsetup create vroot --table \
-    "0 2097152 "\
-    "verity 1 /dev/sda1 /dev/sda2 4096 4096 2097152 1 "\
+Set up a device:
+  # dmsetup create vroot --readonly --table \
+    "0 2097152 verity 1 /dev/sda1 /dev/sda2 4096 4096 262144 1 sha256 "\
     "4392712ba01368efdf14b05c76f9e4df0d53664630b5d48632ed17a137f39076 "\
     "1234000000000000000000000000000000000000000000000000000000000000"
 
 A command line tool veritysetup is available to compute or verify
-the hash tree or activate the kernel driver.  This is available from
-the LVM2 upstream repository and may be supplied as a package called
-device-mapper-verity-tools:
-    git://sources.redhat.com/git/lvm2
-    http://sourceware.org/git/?p=lvm2.git
-    http://sourceware.org/cgi-bin/cvsweb.cgi/LVM2/verity?cvsroot=lvm2
-
-veritysetup -a vroot /dev/sda1 /dev/sda2 \
-        4392712ba01368efdf14b05c76f9e4df0d53664630b5d48632ed17a137f39076
+the hash tree or activate the kernel device. This is available from
+the cryptsetup upstream repository http://code.google.com/p/cryptsetup/
+(as a libcryptsetup extension).
+
+Create hash on the device:
+  # veritysetup format /dev/sda1 /dev/sda2
+  ...
+  Root hash: 4392712ba01368efdf14b05c76f9e4df0d53664630b5d48632ed17a137f39076
+
+Activate the device:
+  # veritysetup create vroot /dev/sda1 /dev/sda2 \
+    4392712ba01368efdf14b05c76f9e4df0d53664630b5d48632ed17a137f39076
diff --git a/Documentation/devicetree/bindings/input/fsl-mma8450.txt b/Documentation/devicetree/bindings/input/fsl-mma8450.txt
index a00c94ccbdee..0b96e5737d3a 100644
--- a/Documentation/devicetree/bindings/input/fsl-mma8450.txt
+++ b/Documentation/devicetree/bindings/input/fsl-mma8450.txt
@@ -2,6 +2,7 @@
 
 Required properties:
 - compatible : "fsl,mma8450".
+- reg: the I2C address of MMA8450
 
 Example:
 
diff --git a/Documentation/devicetree/bindings/mfd/mc13xxx.txt b/Documentation/devicetree/bindings/mfd/mc13xxx.txt
index 19f6af47a792..baf07987ae68 100644
--- a/Documentation/devicetree/bindings/mfd/mc13xxx.txt
+++ b/Documentation/devicetree/bindings/mfd/mc13xxx.txt
@@ -46,8 +46,8 @@ Examples:
 
 ecspi@70010000 { /* ECSPI1 */
         fsl,spi-num-chipselects = <2>;
-        cs-gpios = <&gpio3 24 0>, /* GPIO4_24 */
-                   <&gpio3 25 0>; /* GPIO4_25 */
+        cs-gpios = <&gpio4 24 0>, /* GPIO4_24 */
+                   <&gpio4 25 0>; /* GPIO4_25 */
         status = "okay";
 
         pmic: mc13892@0 {
diff --git a/Documentation/devicetree/bindings/mmc/fsl-imx-esdhc.txt b/Documentation/devicetree/bindings/mmc/fsl-imx-esdhc.txt
index c7e404b3ef05..fea541ee8b34 100644
--- a/Documentation/devicetree/bindings/mmc/fsl-imx-esdhc.txt
+++ b/Documentation/devicetree/bindings/mmc/fsl-imx-esdhc.txt
@@ -29,6 +29,6 @@ esdhc@70008000 {
         compatible = "fsl,imx51-esdhc";
         reg = <0x70008000 0x4000>;
         interrupts = <2>;
-        cd-gpios = <&gpio0 6 0>; /* GPIO1_6 */
-        wp-gpios = <&gpio0 5 0>; /* GPIO1_5 */
+        cd-gpios = <&gpio1 6 0>; /* GPIO1_6 */
+        wp-gpios = <&gpio1 5 0>; /* GPIO1_5 */
 };
diff --git a/Documentation/devicetree/bindings/net/fsl-fec.txt b/Documentation/devicetree/bindings/net/fsl-fec.txt
index 7ab9e1a2d8be..4616fc28ee86 100644
--- a/Documentation/devicetree/bindings/net/fsl-fec.txt
+++ b/Documentation/devicetree/bindings/net/fsl-fec.txt
@@ -19,6 +19,6 @@ ethernet@83fec000 {
         reg = <0x83fec000 0x4000>;
         interrupts = <87>;
         phy-mode = "mii";
-        phy-reset-gpios = <&gpio1 14 0>; /* GPIO2_14 */
+        phy-reset-gpios = <&gpio2 14 0>; /* GPIO2_14 */
         local-mac-address = [00 04 9F 01 1B B9];
 };
diff --git a/Documentation/devicetree/bindings/spi/fsl-imx-cspi.txt b/Documentation/devicetree/bindings/spi/fsl-imx-cspi.txt
index 9841057d112b..4256a6df9b79 100644
--- a/Documentation/devicetree/bindings/spi/fsl-imx-cspi.txt
+++ b/Documentation/devicetree/bindings/spi/fsl-imx-cspi.txt
@@ -17,6 +17,6 @@ ecspi@70010000 {
         reg = <0x70010000 0x4000>;
         interrupts = <36>;
         fsl,spi-num-chipselects = <2>;
-        cs-gpios = <&gpio3 24 0>, /* GPIO4_24 */
-                   <&gpio3 25 0>; /* GPIO4_25 */
+        cs-gpios = <&gpio3 24 0>, /* GPIO3_24 */
+                   <&gpio3 25 0>; /* GPIO3_25 */
 };
diff --git a/Documentation/devicetree/bindings/vendor-prefixes.txt b/Documentation/devicetree/bindings/vendor-prefixes.txt
index 6eab91747a86..db4d3af3643c 100644
--- a/Documentation/devicetree/bindings/vendor-prefixes.txt
+++ b/Documentation/devicetree/bindings/vendor-prefixes.txt
@@ -3,6 +3,7 @@ Device tree binding vendor prefix registry.  Keep list in alphabetical order.
 This isn't an exhaustive list, but you should add new prefixes to it before
 using them to avoid name-space collisions.
 
+ad      Avionic Design GmbH
 adi     Analog Devices, Inc.
 amcc    Applied Micro Circuits Corporation (APM, formally AMCC)
 apm     Applied Micro Circuits Corporation (APM)
diff --git a/Documentation/hwmon/coretemp b/Documentation/hwmon/coretemp
index 84d46c0c71a3..c86b50c03ea8 100644
--- a/Documentation/hwmon/coretemp
+++ b/Documentation/hwmon/coretemp
@@ -6,7 +6,9 @@ Supported chips:
     Prefix: 'coretemp'
     CPUID: family 0x6, models 0xe (Pentium M DC), 0xf (Core 2 DC 65nm),
                               0x16 (Core 2 SC 65nm), 0x17 (Penryn 45nm),
-                              0x1a (Nehalem), 0x1c (Atom), 0x1e (Lynnfield)
+                              0x1a (Nehalem), 0x1c (Atom), 0x1e (Lynnfield),
+                              0x26 (Tunnel Creek Atom), 0x27 (Medfield Atom),
+                              0x36 (Cedar Trail Atom)
     Datasheet: Intel 64 and IA-32 Architectures Software Developer's Manual
                Volume 3A: System Programming Guide
                http://softwarecommunity.intel.com/Wiki/Mobility/720.htm
@@ -52,6 +54,17 @@ Some information comes from ark.intel.com
 
 Process         Processor                                       TjMax(C)
 
+22nm            Core i5/i7 Processors
+                i7 3920XM, 3820QM, 3720QM, 3667U, 3520M         105
+                i5 3427U, 3360M/3320M                           105
+                i7 3770/3770K                                   105
+                i5 3570/3570K, 3550, 3470/3450                  105
+                i7 3770S                                        103
+                i5 3570S/3550S, 3475S/3470S/3450S               103
+                i7 3770T                                        94
+                i5 3570T                                        94
+                i5 3470T                                        91
+
 32nm            Core i3/i5/i7 Processors
                 i7 660UM/640/620, 640LM/620, 620M, 610E         105
                 i5 540UM/520/430, 540M/520/450/430              105
@@ -65,6 +78,11 @@ Process		Processor					TjMax(C)
                 U3400                                           105
                 P4505/P4500                                     90
 
+32nm            Atom Processors
+                Z2460                                           90
+                D2700/2550/2500                                 100
+                N2850/2800/2650/2600                            100
+
 45nm            Xeon Processors 5400 Quad-Core
                 X5492, X5482, X5472, X5470, X5460, X5450        85
                 E5472, E5462, E5450/40/30/20/10/05              85
@@ -85,6 +103,8 @@ Process		Processor					TjMax(C)
                 N475/470/455/450                                100
                 N280/270                                        90
                 330/230                                         125
+                E680/660/640/620                                90
+                E680T/660T/640T/620T                            110
 
 45nm            Core2 Processors
                 Solo ULV SU3500/3300                            100
diff --git a/Documentation/prctl/no_new_privs.txt b/Documentation/prctl/no_new_privs.txt
new file mode 100644
index 000000000000..f7be84fba910
--- /dev/null
+++ b/Documentation/prctl/no_new_privs.txt
@@ -0,0 +1,57 @@
+The execve system call can grant a newly-started program privileges that
+its parent did not have.  The most obvious examples are setuid/setgid
+programs and file capabilities.  To prevent the parent program from
+gaining these privileges as well, the kernel and user code must be
+careful to prevent the parent from doing anything that could subvert the
+child.  For example:
+
+ - The dynamic loader handles LD_* environment variables differently if
+   a program is setuid.
+
+ - chroot is disallowed to unprivileged processes, since it would allow
+   /etc/passwd to be replaced from the point of view of a process that
+   inherited chroot.
+
+ - The exec code has special handling for ptrace.
+
+These are all ad-hoc fixes.  The no_new_privs bit (since Linux 3.5) is a
+new, generic mechanism to make it safe for a process to modify its
+execution environment in a manner that persists across execve.  Any task
+can set no_new_privs.  Once the bit is set, it is inherited across fork,
+clone, and execve and cannot be unset.  With no_new_privs set, execve
+promises not to grant the privilege to do anything that could not have
+been done without the execve call.  For example, the setuid and setgid
+bits will no longer change the uid or gid; file capabilities will not
+add to the permitted set, and LSMs will not relax constraints after
+execve.
+
+To set no_new_privs, use prctl(PR_SET_NO_NEW_PRIVS, 1, 0, 0, 0).
+
+Be careful, though: LSMs might also not tighten constraints on exec
+in no_new_privs mode.  (This means that setting up a general-purpose
+service launcher to set no_new_privs before execing daemons may
+interfere with LSM-based sandboxing.)
+
+Note that no_new_privs does not prevent privilege changes that do not
+involve execve.  An appropriately privileged task can still call
+setuid(2) and receive SCM_RIGHTS datagrams.
+
+There are two main use cases for no_new_privs so far:
+
+ - Filters installed for the seccomp mode 2 sandbox persist across
+   execve and can change the behavior of newly-executed programs.
+   Unprivileged users are therefore only allowed to install such filters
+   if no_new_privs is set.
+
+ - By itself, no_new_privs can be used to reduce the attack surface
+   available to an unprivileged user.  If everything running with a
+   given uid has no_new_privs set, then that uid will be unable to
+   escalate its privileges by directly attacking setuid, setgid, and
+   fcap-using binaries; it will need to compromise something without the
+   no_new_privs bit set first.
+
+In the future, other potentially dangerous kernel features could become
+available to unprivileged tasks if no_new_privs is set.  In principle,
+several options to unshare(2) and clone(2) would be safe when
+no_new_privs is set, and no_new_privs + chroot is considerable less
+dangerous than chroot by itself.
diff --git a/Documentation/stable_kernel_rules.txt b/Documentation/stable_kernel_rules.txt
index f0ab5cf28fca..4a7b54bd37e8 100644
--- a/Documentation/stable_kernel_rules.txt
+++ b/Documentation/stable_kernel_rules.txt
@@ -12,6 +12,12 @@ Rules on what kind of patches are accepted, and which ones are not, into the
    marked CONFIG_BROKEN), an oops, a hang, data corruption, a real
    security issue, or some "oh, that's not good" issue.  In short, something
    critical.
+ - Serious issues as reported by a user of a distribution kernel may also
+   be considered if they fix a notable performance or interactivity issue.
+   As these fixes are not as obvious and have a higher risk of a subtle
+   regression they should only be submitted by a distribution kernel
+   maintainer and include an addendum linking to a bugzilla entry if it
+   exists and additional information on the user-visible impact.
  - New device IDs and quirks are also accepted.
  - No "theoretical race condition" issues, unless an explanation of how the
    race can be exploited is also provided.
diff --git a/Documentation/virtual/kvm/api.txt b/Documentation/virtual/kvm/api.txt
index 930126698a0f..2c9948379469 100644
--- a/Documentation/virtual/kvm/api.txt
+++ b/Documentation/virtual/kvm/api.txt
@@ -1930,6 +1930,23 @@ The "pte_enc" field provides a value that can OR'ed into the hash
 PTE's RPN field (ie, it needs to be shifted left by 12 to OR it
 into the hash PTE second double word).
 
+4.75 KVM_IRQFD
+
+Capability: KVM_CAP_IRQFD
+Architectures: x86
+Type: vm ioctl
+Parameters: struct kvm_irqfd (in)
+Returns: 0 on success, -1 on error
+
+Allows setting an eventfd to directly trigger a guest interrupt.
+kvm_irqfd.fd specifies the file descriptor to use as the eventfd and
+kvm_irqfd.gsi specifies the irqchip pin toggled by this event.  When
+an event is tiggered on the eventfd, an interrupt is injected into
+the guest using the specified gsi pin.  The irqfd is removed using
+the KVM_IRQFD_FLAG_DEASSIGN flag, specifying both kvm_irqfd.fd
+and kvm_irqfd.gsi.
+
+
 5. The kvm_run structure
 ------------------------