Merge git://git.kernel.org/pub/scm/linux/kernel/git/agk/linux-2.6-dm

* git://git.kernel.org/pub/scm/linux/kernel/git/agk/linux-2.6-dm: (48 commits)
  dm mpath: change to be request based
  dm: disable interrupt when taking map_lock
  dm: do not set QUEUE_ORDERED_DRAIN if request based
  dm: enable request based option
  dm: prepare for request based option
  dm raid1: add userspace log
  dm: calculate queue limits during resume not load
  dm log: fix create_log_context to use logical_block_size of log device
  dm target:s introduce iterate devices fn
  dm table: establish queue limits by copying table limits
  dm table: replace struct io_restrictions with struct queue_limits
  dm table: validate device logical_block_size
  dm table: ensure targets are aligned to logical_block_size
  dm ioctl: support cookies for udev
  dm: sysfs add suspended attribute
  dm table: improve warning message when devices not freed before destruction
  dm mpath: add service time load balancer
  dm mpath: add queue length load balancer
  dm mpath: add start_io and nr_bytes to path selectors
  dm snapshot: use barrier when writing exception store
  ...

3 files changed, 184 insertions, 0 deletions

diff --git a/Documentation/device-mapper/dm-log.txt b/Documentation/device-mapper/dm-log.txt
new file mode 100644
index 000000000000..994dd75475a6
--- /dev/null
+++ b/Documentation/device-mapper/dm-log.txt
@@ -0,0 +1,54 @@
+Device-Mapper Logging
+=====================
+The device-mapper logging code is used by some of the device-mapper
+RAID targets to track regions of the disk that are not consistent.
+A region (or portion of the address space) of the disk may be
+inconsistent because a RAID stripe is currently being operated on or
+a machine died while the region was being altered.  In the case of
+mirrors, a region would be considered dirty/inconsistent while you
+are writing to it because the writes need to be replicated for all
+the legs of the mirror and may not reach the legs at the same time.
+Once all writes are complete, the region is considered clean again.
+
+There is a generic logging interface that the device-mapper RAID
+implementations use to perform logging operations (see
+dm_dirty_log_type in include/linux/dm-dirty-log.h).  Various different
+logging implementations are available and provide different
+capabilities.  The list includes:
+
+Type            Files
+====            =====
+disk            drivers/md/dm-log.c
+core            drivers/md/dm-log.c
+userspace       drivers/md/dm-log-userspace* include/linux/dm-log-userspace.h
+
+The "disk" log type
+-------------------
+This log implementation commits the log state to disk.  This way, the
+logging state survives reboots/crashes.
+
+The "core" log type
+-------------------
+This log implementation keeps the log state in memory.  The log state
+will not survive a reboot or crash, but there may be a small boost in
+performance.  This method can also be used if no storage device is
+available for storing log state.
+
+The "userspace" log type
+------------------------
+This log type simply provides a way to export the log API to userspace,
+so log implementations can be done there.  This is done by forwarding most
+logging requests to userspace, where a daemon receives and processes the
+request.
+
+The structure used for communication between kernel and userspace are
+located in include/linux/dm-log-userspace.h.  Due to the frequency,
+diversity, and 2-way communication nature of the exchanges between
+kernel and userspace, 'connector' is used as the interface for
+communication.
+
+There are currently two userspace log implementations that leverage this
+framework - "clustered_disk" and "clustered_core".  These implementations
+provide a cluster-coherent log for shared-storage.  Device-mapper mirroring
+can be used in a shared-storage environment when the cluster log implementations
+are employed.
diff --git a/Documentation/device-mapper/dm-queue-length.txt b/Documentation/device-mapper/dm-queue-length.txt
new file mode 100644
index 000000000000..f4db2562175c
--- /dev/null
+++ b/Documentation/device-mapper/dm-queue-length.txt
@@ -0,0 +1,39 @@
+dm-queue-length
+===============
+
+dm-queue-length is a path selector module for device-mapper targets,
+which selects a path with the least number of in-flight I/Os.
+The path selector name is 'queue-length'.
+
+Table parameters for each path: [<repeat_count>]
+        <repeat_count>: The number of I/Os to dispatch using the selected
+                        path before switching to the next path.
+                        If not given, internal default is used. To check
+                        the default value, see the activated table.
+
+Status for each path: <status> <fail-count> <in-flight>
+        <status>: 'A' if the path is active, 'F' if the path is failed.
+        <fail-count>: The number of path failures.
+        <in-flight>: The number of in-flight I/Os on the path.
+
+
+Algorithm
+=========
+
+dm-queue-length increments/decrements 'in-flight' when an I/O is
+dispatched/completed respectively.
+dm-queue-length selects a path with the minimum 'in-flight'.
+
+
+Examples
+========
+In case that 2 paths (sda and sdb) are used with repeat_count == 128.
+
+# echo "0 10 multipath 0 0 1 1 queue-length 0 2 1 8:0 128 8:16 128" \
+  dmsetup create test
+#
+# dmsetup table
+test: 0 10 multipath 0 0 1 1 queue-length 0 2 1 8:0 128 8:16 128
+#
+# dmsetup status
+test: 0 10 multipath 2 0 0 0 1 1 E 0 2 1 8:0 A 0 0 8:16 A 0 0
diff --git a/Documentation/device-mapper/dm-service-time.txt b/Documentation/device-mapper/dm-service-time.txt
new file mode 100644
index 000000000000..7d00668e97bb
--- /dev/null
+++ b/Documentation/device-mapper/dm-service-time.txt
@@ -0,0 +1,91 @@
+dm-service-time
+===============
+
+dm-service-time is a path selector module for device-mapper targets,
+which selects a path with the shortest estimated service time for
+the incoming I/O.
+
+The service time for each path is estimated by dividing the total size
+of in-flight I/Os on a path with the performance value of the path.
+The performance value is a relative throughput value among all paths
+in a path-group, and it can be specified as a table argument.
+
+The path selector name is 'service-time'.
+
+Table parameters for each path: [<repeat_count> [<relative_throughput>]]
+        <repeat_count>: The number of I/Os to dispatch using the selected
+                        path before switching to the next path.
+                        If not given, internal default is used.  To check
+                        the default value, see the activated table.
+        <relative_throughput>: The relative throughput value of the path
+                        among all paths in the path-group.
+                        The valid range is 0-100.
+                        If not given, minimum value '1' is used.
+                        If '0' is given, the path isn't selected while
+                        other paths having a positive value are available.
+
+Status for each path: <status> <fail-count> <in-flight-size> \
+                      <relative_throughput>
+        <status>: 'A' if the path is active, 'F' if the path is failed.
+        <fail-count>: The number of path failures.
+        <in-flight-size>: The size of in-flight I/Os on the path.
+        <relative_throughput>: The relative throughput value of the path
+                        among all paths in the path-group.
+
+
+Algorithm
+=========
+
+dm-service-time adds the I/O size to 'in-flight-size' when the I/O is
+dispatched and substracts when completed.
+Basically, dm-service-time selects a path having minimum service time
+which is calculated by:
+
+        ('in-flight-size' + 'size-of-incoming-io') / 'relative_throughput'
+
+However, some optimizations below are used to reduce the calculation
+as much as possible.
+
+        1. If the paths have the same 'relative_throughput', skip
+           the division and just compare the 'in-flight-size'.
+
+        2. If the paths have the same 'in-flight-size', skip the division
+           and just compare the 'relative_throughput'.
+
+        3. If some paths have non-zero 'relative_throughput' and others
+           have zero 'relative_throughput', ignore those paths with zero
+           'relative_throughput'.
+
+If such optimizations can't be applied, calculate service time, and
+compare service time.
+If calculated service time is equal, the path having maximum
+'relative_throughput' may be better.  So compare 'relative_throughput'
+then.
+
+
+Examples
+========
+In case that 2 paths (sda and sdb) are used with repeat_count == 128
+and sda has an average throughput 1GB/s and sdb has 4GB/s,
+'relative_throughput' value may be '1' for sda and '4' for sdb.
+
+# echo "0 10 multipath 0 0 1 1 service-time 0 2 2 8:0 128 1 8:16 128 4" \
+  dmsetup create test
+#
+# dmsetup table
+test: 0 10 multipath 0 0 1 1 service-time 0 2 2 8:0 128 1 8:16 128 4
+#
+# dmsetup status
+test: 0 10 multipath 2 0 0 0 1 1 E 0 2 2 8:0 A 0 0 1 8:16 A 0 0 4
+
+
+Or '2' for sda and '8' for sdb would be also true.
+
+# echo "0 10 multipath 0 0 1 1 service-time 0 2 2 8:0 128 2 8:16 128 8" \
+  dmsetup create test
+#
+# dmsetup table
+test: 0 10 multipath 0 0 1 1 service-time 0 2 2 8:0 128 2 8:16 128 8
+#
+# dmsetup status
+test: 0 10 multipath 2 0 0 0 1 1 E 0 2 2 8:0 A 0 0 2 8:16 A 0 0 8