aboutsummaryrefslogtreecommitdiffstats
path: root/Documentation
diff options
context:
space:
mode:
authorRudolf Marek <r.marek@assembler.cz>2006-12-12 12:18:30 -0500
committerJean Delvare <khali@arrakis.delvare>2006-12-12 12:18:30 -0500
commit61db011d403388b2dd342489d7110cf13cb99025 (patch)
tree302a8a28dce82a665a18131ceb3a927344dc5b60 /Documentation
parent6800c3d027b4458a6fb5ab78064c2e3b7da2f94f (diff)
hwmon/w83793: Add documentation and maintainer
Documentation for the new w83793 hardware monitoring driver, originally provided by Yuan My from Winbond. Also add myself as the maintainer of this driver. Signed-off-by: Rudolf Marek <r.marek@assembler.cz> Signed-off-by: Jean Delvare <khali@linux-fr.org>
Diffstat (limited to 'Documentation')
-rw-r--r--Documentation/hwmon/sysfs-interface4
-rw-r--r--Documentation/hwmon/w83793110
2 files changed, 113 insertions, 1 deletions
diff --git a/Documentation/hwmon/sysfs-interface b/Documentation/hwmon/sysfs-interface
index d1d390aaf620..efef3b962cd3 100644
--- a/Documentation/hwmon/sysfs-interface
+++ b/Documentation/hwmon/sysfs-interface
@@ -208,12 +208,14 @@ temp[1-*]_auto_point[1-*]_temp_hyst
208**************** 208****************
209 209
210temp[1-*]_type Sensor type selection. 210temp[1-*]_type Sensor type selection.
211 Integers 1 to 4 or thermistor Beta value (typically 3435) 211 Integers 1 to 6 or thermistor Beta value (typically 3435)
212 RW 212 RW
213 1: PII/Celeron Diode 213 1: PII/Celeron Diode
214 2: 3904 transistor 214 2: 3904 transistor
215 3: thermal diode 215 3: thermal diode
216 4: thermistor (default/unknown Beta) 216 4: thermistor (default/unknown Beta)
217 5: AMD AMDSI
218 6: Intel PECI
217 Not all types are supported by all chips 219 Not all types are supported by all chips
218 220
219temp[1-*]_max Temperature max value. 221temp[1-*]_max Temperature max value.
diff --git a/Documentation/hwmon/w83793 b/Documentation/hwmon/w83793
new file mode 100644
index 000000000000..45e5408340e0
--- /dev/null
+++ b/Documentation/hwmon/w83793
@@ -0,0 +1,110 @@
1Kernel driver w83793
2====================
3
4Supported chips:
5 * Winbond W83793G/W83793R
6 Prefix: 'w83793'
7 Addresses scanned: I2C 0x2c - 0x2f
8 Datasheet: Still not published
9
10Authors:
11 Yuan Mu (Winbond Electronics)
12 Rudolf Marek <r.marek@assembler.cz>
13
14
15Module parameters
16-----------------
17
18* reset int
19 (default 0)
20 This parameter is not recommended, it will lose motherboard specific
21 settings. Use 'reset=1' to reset the chip when loading this module.
22
23* force_subclients=bus,caddr,saddr1,saddr2
24 This is used to force the i2c addresses for subclients of
25 a certain chip. Typical usage is `force_subclients=0,0x2f,0x4a,0x4b'
26 to force the subclients of chip 0x2f on bus 0 to i2c addresses
27 0x4a and 0x4b.
28
29
30Description
31-----------
32
33This driver implements support for Winbond W83793G/W83793R chips.
34
35* Exported features
36 This driver exports 10 voltage sensors, up to 12 fan tachometer inputs,
37 6 remote temperatures, up to 8 sets of PWM fan controls, SmartFan
38 (automatic fan speed control) on all temperature/PWM combinations, 2
39 sets of 6-pin CPU VID input.
40
41* Sensor resolutions
42 If your motherboard maker used the reference design, the resolution of
43 voltage0-2 is 2mV, resolution of voltage3/4/5 is 16mV, 8mV for voltage6,
44 24mV for voltage7/8. Temp1-4 have a 0.25 degree Celsius resolution,
45 temp5-6 have a 1 degree Celsiis resolution.
46
47* Temperature sensor types
48 Temp1-4 have 3 possible types. It can be read from (and written to)
49 temp[1-4]_type.
50 - If the value of 0, the related temperature channel stops
51 monitoring.
52 - If the value is 3, it starts monitoring using a remote termal diode
53 (default).
54 - If the value is 5, it starts monitoring using the temperature sensor
55 in AMD CPU and get result by AMDSI.
56 - If the value is 6, it starts monitoring using the temperature sensor
57 in Intel CPU and get result by PECI.
58 Temp5-6 can be connected to external thermistors (value of
59 temp[5-6]_type is 4). They can also be disabled (value is 0).
60
61* Alarm mechanism
62 For voltage sensors, an alarm triggers if the measured value is below
63 the low voltage limit or over the high voltage limit.
64 For temperature sensors, an alarm triggers if the measured value goes
65 above the high temperature limit, and wears off only after the measured
66 value drops below the hysteresis value.
67 For fan sensors, an alarm triggers if the measured value is below the
68 low speed limit.
69
70* SmartFan/PWM control
71 If you want to set a pwm fan to manual mode, you just need to make sure it
72 is not controlled by any temp channel, for example, you want to set fan1
73 to manual mode, you need to check the value of temp[1-6]_fan_map, make
74 sure bit 0 is cleared in the 6 values. And then set the pwm1 value to
75 control the fan.
76
77 Each temperature channel can control all the 8 PWM outputs (by setting the
78 corresponding bit in tempX_fan_map), you can set the temperature channel
79 mode using temp[1-6]_pwm_enable, 2 is Thermal Cruise mode and 3
80 is the SmartFanII mode. Temperature channels will try to speed up or
81 slow down all controlled fans, this means one fan can receive different
82 PWM value requests from different temperature channels, but the chip
83 will always pick the safest (max) PWM value for each fan.
84
85 In Thermal Cruise mode, the chip attempts to keep the temperature at a
86 predefined value, within a tolerance margin. So if tempX_input >
87 thermal_cruiseX + toleranceX, the chip will increase the PWM value,
88 if tempX_input < thermal_cruiseX - toleranceX, the chip will decrease
89 the PWM value. If the temperature is within the tolerance range, the PWM
90 value is left unchanged.
91
92 SmartFanII works differently, you have to define up to 7 PWM, temperature
93 trip points, defining a PWM/temperature curve which the chip will follow.
94 While not fundamentally different from the Thermal Cruise mode, the
95 implementation is quite different, giving you a finer-grained control.
96
97* Chassis
98 If the case open alarm triggers, it will stay in this state unless cleared
99 by any write to the sysfs file "chassis".
100
101* VID and VRM
102 The VRM version is detected automatically, don't modify the it unless you
103 *do* know the cpu VRM version and it's not properly detected.
104
105
106Notes
107-----
108
109 Only Fan1-5 and PWM1-3 are guaranteed to always exist, other fan inputs and
110 PWM outputs may or may not exist depending on the chip pin configuration.