Merge git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/devfs-2.6

* git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/devfs-2.6: (22 commits) [PATCH] devfs: Remove it from the feature_removal.txt file [PATCH] devfs: Last little devfs cleanups throughout the kernel tree. [PATCH] devfs: Rename TTY_DRIVER_NO_DEVFS to TTY_DRIVER_DYNAMIC_DEV [PATCH] devfs: Remove the tty_driver devfs_name field as it's no longer needed [PATCH] devfs: Remove the line_driver devfs_name field as it's no longer needed [PATCH] devfs: Remove the videodevice devfs_name field as it's no longer needed [PATCH] devfs: Remove the gendisk devfs_name field as it's no longer needed [PATCH] devfs: Remove the miscdevice devfs_name field as it's no longer needed [PATCH] devfs: Remove the devfs_fs_kernel.h file from the tree [PATCH] devfs: Remove devfs_remove() function from the kernel tree [PATCH] devfs: Remove devfs_mk_cdev() function from the kernel tree [PATCH] devfs: Remove devfs_mk_bdev() function from the kernel tree [PATCH] devfs: Remove devfs_mk_symlink() function from the kernel tree [PATCH] devfs: Remove devfs_mk_dir() function from the kernel tree [PATCH] devfs: Remove devfs_*_tape() functions from the kernel tree [PATCH] devfs: Remove devfs support from the sound subsystem [PATCH] devfs: Remove devfs support from the ide subsystem. [PATCH] devfs: Remove devfs support from the serial subsystem [PATCH] devfs: Remove devfs from the init code [PATCH] devfs: Remove devfs from the partition code ...
author: Linus Torvalds <torvalds@g5.osdl.org> 2006-06-29 17:19:21 -0400
committer: Linus Torvalds <torvalds@g5.osdl.org> 2006-06-29 17:19:21 -0400
commit: 602cada851b28c5792339786efe872fbdc1f5d41 (patch)
tree: 233d474b74d6038b5bb54a07ad91dd1bb10b0218 /Documentation
parent: 82991c6f2c361acc17279b8124d9bf1878973435 (diff)
parent: fee68d1cc0d9bd863e51c16cdcd707737b16bb38 (diff)
11 files changed, 17 insertions, 4090 deletions
diff --git a/Documentation/Changes b/Documentation/Changes
index b02f476c2973..488272074c36 100644
--- a/Documentation/Changes
+++ b/Documentation/Changes
@@ -181,8 +181,8 @@ Intel IA32 microcode
 --------------------
 A driver has been added to allow updating of Intel IA32 microcode,
-accessible as both a devfs regular file and as a normal (misc)
+accessible as a normal (misc) character device.  If you are not using
-character device.  If you are not using devfs you may need to:
+udev you may need to:
 mkdir /dev/cpu
 mknod /dev/cpu/microcode c 10 184
@@ -201,7 +201,9 @@ with programs using shared memory.
 udev
 ----
 udev is a userspace application for populating /dev dynamically with
-only entries for devices actually present. udev replaces devfs.
+only entries for devices actually present.  udev replaces the basic
+functionality of devfs, while allowing persistant device naming for
+devices.
 FUSE
 ----
@@ -231,18 +233,13 @@ The PPP driver has been restructured to support multilink and to
 enable it to operate over diverse media layers.  If you use PPP,
 upgrade pppd to at least 2.4.0.
-If you are not using devfs, you must have the device file /dev/ppp
+If you are not using udev, you must have the device file /dev/ppp
 which can be made by:
 mknod /dev/ppp c 108 0
 as root.
-If you use devfsd and build ppp support as modules, you will need
-the following in your /etc/devfsd.conf file:
-LOOKUP  PPP     MODLOAD
 Isdn4k-utils
 ------------
diff --git a/Documentation/DocBook/kernel-api.tmpl b/Documentation/DocBook/kernel-api.tmpl
index 3630a0d7695f..1ae4dc0fd856 100644
--- a/Documentation/DocBook/kernel-api.tmpl
+++ b/Documentation/DocBook/kernel-api.tmpl
@@ -348,11 +348,6 @@ X!Earch/i386/kernel/mca.c
     </sect1>
  </chapter>
-  <chapter id="devfs">
-     <title>The Device File System</title>
-!Efs/devfs/base.c
-  </chapter>
  <chapter id="sysfs">
     <title>The Filesystem for Exporting Kernel Objects</title>
 !Efs/sysfs/file.c
diff --git a/Documentation/README.DAC960 b/Documentation/README.DAC960
index 98ea617a0dd6..0e8f618ab534 100644
--- a/Documentation/README.DAC960
+++ b/Documentation/README.DAC960
@@ -78,9 +78,9 @@ also known as "System Drives", and Drive Groups are also called "Packs".  Both
 terms are in use in the Mylex documentation; I have chosen to standardize on
 the more generic "Logical Drive" and "Drive Group".
-DAC960 RAID disk devices are named in the style of the Device File System
+DAC960 RAID disk devices are named in the style of the obsolete Device File
-(DEVFS).  The device corresponding to Logical Drive D on Controller C is
+System (DEVFS).  The device corresponding to Logical Drive D on Controller C
-referred to as /dev/rd/cCdD, and the partitions are called /dev/rd/cCdDp1
+is referred to as /dev/rd/cCdD, and the partitions are called /dev/rd/cCdDp1
 through /dev/rd/cCdDp7.  For example, partition 3 of Logical Drive 5 on
 Controller 2 is referred to as /dev/rd/c2d5p3.  Note that unlike with SCSI
 disks the device names will not change in the event of a disk drive failure.
diff --git a/Documentation/feature-removal-schedule.txt b/Documentation/feature-removal-schedule.txt
index b1c6c7036c1c..1cbbb8e28999 100644
--- a/Documentation/feature-removal-schedule.txt
+++ b/Documentation/feature-removal-schedule.txt
@@ -6,17 +6,6 @@ be removed from this file.
 ---------------------------
-What:   devfs
-When:   July 2005
-Files:  fs/devfs/*, include/linux/devfs_fs*.h and assorted devfs
-        function calls throughout the kernel tree
-Why:    It has been unmaintained for a number of years, has unfixable
-        races, contains a naming policy within the kernel that is
-        against the LSB, and can be replaced by using udev.
-Who:    Greg Kroah-Hartman <greg@kroah.com>
---------------------------
 What:   RAW driver (CONFIG_RAW_DRIVER)
 When:   December 2005
 Why:    declared obsolete since kernel 2.6.3
diff --git a/Documentation/filesystems/devfs/ChangeLog b/Documentation/filesystems/devfs/ChangeLog
deleted file mode 100644
index e5aba5246d7c..000000000000
--- a/Documentation/filesystems/devfs/ChangeLog
+++ /dev/null
@@ -1,1977 +0,0 @@
-/* -*- auto-fill -*-                                                         */
-===============================================================================
-Changes for patch v1
- creation of devfs
- modified miscellaneous character devices to support devfs
-===============================================================================
-Changes for patch v2
- bug fix with manual inode creation
-===============================================================================
-Changes for patch v3
- bugfixes
- documentation improvements
- created a couple of scripts (one to save&restore a devfs and the
-  other to set up compatibility symlinks)
- devfs support for SCSI discs. New name format is: sd_hHcCiIlL
-===============================================================================
-Changes for patch v4
- bugfix for the directory reading code
- bugfix for compilation with kerneld
- devfs support for generic hard discs
- rationalisation of the various watchdog drivers
-===============================================================================
-Changes for patch v5
- support for mounting directly from entries in the devfs (it doesn't
-  need to be mounted to do this), including the root filesystem.
-  Mounting of swap partitions also works. Hence, now if you set
-  CONFIG_DEVFS_ONLY to 'Y' then you won't be able to access your discs
-  via ordinary device nodes. Naturally, the default is 'N' so that you
-  can still use your old device nodes.  If you want to mount from devfs
-  entries, make sure you use: append = "root=/dev/sd_..." in your
-  lilo.conf. It seems LILO looks for the device number (major&minor)
-  and writes that into the kernel image :-( 
- support for character memory devices (/dev/null, /dev/zero, /dev/full
-  and so on). Thanks to C. Scott Ananian <cananian@alumni.princeton.edu>
-===============================================================================
-Changes for patch v6
- support for subdirectories
- support for symbolic links (created by devfs_mk_symlink(), no
-  support yet for creation via symlink(2))
- SCSI disc naming now cast in stone, with the format:
-  /dev/sd/c0b1t2u3      controller=0, bus=1, ID=2, LUN=3, whole disc
-  /dev/sd/c0b1t2u3p4    controller=0, bus=1, ID=2, LUN=3, 4th partition
- loop devices now appear in devfs
- tty devices, console, serial ports, etc. now appear in devfs
-  Thanks to C. Scott Ananian <cananian@alumni.princeton.edu>
- bugs with mounting devfs-only devices now fixed
-===============================================================================
-Changes for patch v7
- SCSI CD-ROMS, tapes and generic devices now appear in devfs
-===============================================================================
-Changes for patch v8
- bugfix with no-rewind SCSI tapes
- RAMDISCs now appear in devfs
- better cleaning up of devfs entries created by various modules
- interface change to <devfs_register>
-===============================================================================
-Changes for patch v9
- the v8 patch was corrupted somehow, which would affect the patch for
-  linux/fs/filesystems.c
-  I've also fixed the v8 patch file on the WWW
- MetaDevices (/dev/md*) should now appear in devfs
-===============================================================================
-Changes for patch v10
- bugfix in meta device support for devfs
- created this ChangeLog file
- added devfs support to the floppy driver
- added support for creating sockets in a devfs
-===============================================================================
-Changes for patch v11
- added DEVFS_FL_HIDE_UNREG flag
- incorporated better patch for ttyname() in libc 5.4.43 from H.J. Lu.
- interface change to <devfs_mk_symlink>
- support for creating symlinks with symlink(2)
- parallel port printer (/dev/lp*) now appears in devfs
-===============================================================================
-Changes for patch v12
- added inode check to <devfs_fill_file> function
- improved devfs support when mounting from devfs
- added call to <<release>> operation when removing swap areas on
-  devfs devices
- increased NR_SUPER to 128 to support large numbers of devfs mounts
-  (for chroot(2) gaols)
- fixed bug in SCSI disc support: was generating incorrect minors if
-  SCSI ID's did not start at 0 and increase by 1
- support symlink traversal when mounting root
-===============================================================================
-Changes for patch v13
- added devfs support to soundcard driver
-  Thanks to Eric Dumas <dumas@linux.eu.org> and
-  C. Scott Ananian <cananian@alumni.princeton.edu>
- added devfs support to the joystick driver
- loop driver now has it's own subdirectory "/dev/loop/"
- created <devfs_get_flags> and <devfs_set_flags> functions
- fix problem with SCSI disc compatibility names (sd{a,b,c,d,e,f})
-  which assumes ID's start at 0 and increase by 1. Also only create
-  devfs entries for SCSI disc partitions which actually exist
-  Show new names in partition check
-  Thanks to Jakub Jelinek <jj@sunsite.ms.mff.cuni.cz>
-===============================================================================
-Changes for patch v14
- bug fix in floppy driver: would not compile without
-  CONFIG_DEVFS_FS='Y'
-  Thanks to Jurgen Botz <jbotz@nova.botz.org>
- bug fix in loop driver
-  Thanks to C. Scott Ananian <cananian@alumni.princeton.edu>
- do not create devfs entries for printers not configured
-  Thanks to C. Scott Ananian <cananian@alumni.princeton.edu>
- do not create devfs entries for serial ports not present
-  Thanks to C. Scott Ananian <cananian@alumni.princeton.edu>
- ensure <tty_register_devfs> is exported from tty_io.c
-  Thanks to C. Scott Ananian <cananian@alumni.princeton.edu>
- allow unregistering of devfs symlink entries
- fixed bug in SCSI disc naming introduced in last patch version
-===============================================================================
-Changes for patch v15
- ported to kernel 2.1.81
-===============================================================================
-Changes for patch v16
- created <devfs_set_symlink_destination> function
- moved DEVFS_SUPER_MAGIC into header file
- added DEVFS_FL_HIDE flag
- created <devfs_get_maj_min>
- created <devfs_get_handle_from_inode>
- fixed bugs in searching by major&minor
- changed interface to <devfs_unregister>, <devfs_fill_file> and
-  <devfs_find_handle>
- fixed inode times when symlink created with symlink(2)
- change tty driver to do auto-creation of devfs entries
-  Thanks to C. Scott Ananian <cananian@alumni.princeton.edu>
- fixed bug in genhd.c: whole disc (non-SCSI) was not registered to
-  devfs
- updated libc 5.4.43 patch for ttyname()
-===============================================================================
-Changes for patch v17
- added CONFIG_DEVFS_TTY_COMPAT
-  Thanks to C. Scott Ananian <cananian@alumni.princeton.edu>
- bugfix in devfs support for drivers/char/lp.c
-  Thanks to C. Scott Ananian <cananian@alumni.princeton.edu>
- clean up serial driver so that PCMCIA devices unregister correctly
-  Thanks to C. Scott Ananian <cananian@alumni.princeton.edu>
- fixed bug in genhd.c: whole disc (non-SCSI) was not registered to
-  devfs [was missing in patch v16]
- updated libc 5.4.43 patch for ttyname() [was missing in patch v16]
- all SCSI devices now registered in /dev/sg
- support removal of devfs entries via unlink(2)
-===============================================================================
-Changes for patch v18
- added floppy/?u720 floppy entry
- fixed kerneld support for entries in devfs subdirectories
- incorporated latest patch for ttyname() in libc 5.4.43 from H.J. Lu.
-===============================================================================
-Changes for patch v19
- bug fix when looking up unregistered entries: kerneld was not called
- fixes for kernel 2.1.86 (now requires 2.1.86)
-===============================================================================
-Changes for patch v20
- only create available floppy entries
-  Thanks to Andrzej Krzysztofowicz <ankry@green.mif.pg.gda.pl>
- new IDE naming scheme following SCSI format (i.e. /dev/id/c0b0t0u0p1
-  instead of /dev/hda1)
-  Thanks to Andrzej Krzysztofowicz <ankry@green.mif.pg.gda.pl>
- new XT disc naming scheme following SCSI format (i.e. /dev/xd/c0t0p1
-  instead of /dev/xda1)
-  Thanks to Andrzej Krzysztofowicz <ankry@green.mif.pg.gda.pl>
- new non-standard CD-ROM names (i.e. /dev/sbp/c#t#)
-  Thanks to Andrzej Krzysztofowicz <ankry@green.mif.pg.gda.pl>
- allow symlink traversal when mounting the root filesystem
- Create entries for MD devices at MD init
-  Thanks to Christophe Leroy <christophe.leroy5@capway.com>
-===============================================================================
-Changes for patch v21
- ported to kernel 2.1.91
-===============================================================================
-Changes for patch v22
- SCSI host number patch ("scsihosts=" kernel option)
-  Thanks to Andrzej Krzysztofowicz <ankry@green.mif.pg.gda.pl>
-===============================================================================
-Changes for patch v23
- Fixed persistence bug with device numbers for manually created
-  device files
- Fixed problem with recreating symlinks with different content
- Added CONFIG_DEVFS_MOUNT (mount devfs on /dev at boot time)
-===============================================================================
-Changes for patch v24
- Switched from CONFIG_KERNELD to CONFIG_KMOD: module autoloading
-  should now work again
- Hide entries which are manually unlinked
- Always invalidate devfs dentry cache when registering entries
- Support removal of devfs directories via rmdir(2)
- Ensure directories created by <devfs_mk_dir> are visible
- Default no access for "other" for floppy device
-===============================================================================
-Changes for patch v25
- Updates to CREDITS file and minor IDE numbering change
-  Thanks to Andrzej Krzysztofowicz <ankry@green.mif.pg.gda.pl>
- Invalidate devfs dentry cache when making directories
- Invalidate devfs dentry cache when removing entries
- More informative message if root FS mount fails when devfs
-  configured
- Fixed persistence bug with fifos
-===============================================================================
-Changes for patch v26
- ported to kernel 2.1.97
- Changed serial directory from "/dev/serial" to "/dev/tts" and
-  "/dev/consoles" to "/dev/vc" to be more friendly to new procps
-===============================================================================
-Changes for patch v27
- Added support for IDE4 and IDE5
-  Thanks to Andrzej Krzysztofowicz <ankry@green.mif.pg.gda.pl>
- Documented "scsihosts=" boot parameter
- Print process command when debugging kerneld/kmod
- Added debugging for register/unregister/change operations
- Added "devfs=" boot options
- Hide unregistered entries by default
-===============================================================================
-Changes for patch v28
- No longer lock/unlock superblock in <devfs_put_super> (cope with
-  recent VFS interface change)
- Do not automatically change ownership/protection of /dev/tty
- Drop negative dentries when they are released
- Manage dcache more efficiently
-===============================================================================
-Changes for patch v29
- Added DEVFS_FL_AUTO_DEVNUM flag
-===============================================================================
-Changes for patch v30
- No longer set unnecessary methods
- Ported to kernel 2.1.99-pre3
-===============================================================================
-Changes for patch v31
- Added PID display to <call_kerneld> debugging message
- Added "diread" and "diwrite" options
- Ported to kernel 2.1.102
- Fixed persistence problem with permissions
-===============================================================================
-Changes for patch v32
- Fixed devfs support in drivers/block/md.c
-===============================================================================
-Changes for patch v33
- Support legacy device nodes
- Fixed bug where recreated inodes were hidden
- New IDE naming scheme: everything is under /dev/ide
-===============================================================================
-Changes for patch v34
- Improved debugging in <get_vfs_inode>
- Prevent duplicate calls to <devfs_mk_dir> in SCSI layer
- No longer free old dentries in <devfs_mk_dir>
- Free all dentries for a given entry when deleting inodes
-===============================================================================
-Changes for patch v35
- Ported to kernel 2.1.105 (sound driver changes)
-===============================================================================
-Changes for patch v36
- Fixed sound driver port
-===============================================================================
-Changes for patch v37
- Minor documentation tweaks
-===============================================================================
-Changes for patch v38
- More documentation tweaks
- Fix for sound driver port
- Removed ttyname-patch (grab libc 5.4.44 instead)
- Ported to kernel 2.1.107-pre2 (loop driver fix)
-===============================================================================
-Changes for patch v39
- Ported to kernel 2.1.107 (hd.c hunk broke due to spelling "fixes"). Sigh
- Removed many #ifdef's, replaced with trickery in include/devfs_fs.h
-===============================================================================
-Changes for patch v40
- Fix for sound driver port
- Limit auto-device numbering to majors 128 to 239
-===============================================================================
-Changes for patch v41
- Fixed inode times persistence problem
-===============================================================================
-Changes for patch v42
- Ported to kernel 2.1.108 (drivers/scsi/hosts.c hunk broke)
-===============================================================================
-Changes for patch v43
- Fixed spelling in <devfs_readlink> debug
- Fixed bug in <devfs_setup> parsing "dilookup"
- More #ifdef's removed
- Supported Sparc keyboard (/dev/kbd)
- Supported DSP56001 digital signal processor (/dev/dsp56k)
- Supported Apple Desktop Bus (/dev/adb)
- Supported Coda network file system (/dev/cfs*)
-===============================================================================
-Changes for patch v44
- Fixed devfs inode leak when manually recreating inodes
- Fixed permission persistence problem when recreating inodes
-===============================================================================
-Changes for patch v45
- Ported to kernel 2.1.110
-===============================================================================
-Changes for patch v46
- Ported to kernel 2.1.112-pre1
- Removed harmless "unused variable" compiler warning
- Fixed modes for manually recreated device nodes
-===============================================================================
-Changes for patch v47
- Added NULL devfs inode warning in <devfs_read_inode>
- Force all inode nlink values to 1
-===============================================================================
-Changes for patch v48
- Added "dimknod" option
- Set inode nlink to 0 when freeing dentries
- Added support for virtual console capture devices (/dev/vcs*)
-  Thanks to Dennis Hou <smilax@mindmeld.yi.org>
- Fixed modes for manually recreated symlinks
-===============================================================================
-Changes for patch v49
- Ported to kernel 2.1.113
-===============================================================================
-Changes for patch v50
- Fixed bugs in recreated directories and symlinks
-===============================================================================
-Changes for patch v51
- Improved robustness of rc.devfs script
-  Thanks to Roderich Schupp <rsch@experteam.de>
- Fixed bugs in recreated device nodes
- Fixed bug in currently unused <devfs_get_handle_from_inode>
- Defined new <devfs_handle_t> type
- Improved debugging when getting entries
- Fixed bug where directories could be emptied
- Ported to kernel 2.1.115
-===============================================================================
-Changes for patch v52
- Replaced dummy .epoch inode with .devfsd character device
- Modified rc.devfs to take account of above change
- Removed spurious driver warning messages when CONFIG_DEVFS_FS=n
- Implemented devfsd protocol revision 0
-===============================================================================
-Changes for patch v53
- Ported to kernel 2.1.116 (kmod change broke hunk)
- Updated Documentation/Configure.help
- Test and tty pattern patch for rc.devfs script
-  Thanks to Roderich Schupp <rsch@experteam.de>
- Added soothing message to warning in <devfs_d_iput>
-===============================================================================
-Changes for patch v54
- Ported to kernel 2.1.117
- Fixed default permissions in sound driver
- Added support for frame buffer devices (/dev/fb*)
-===============================================================================
-Changes for patch v55
- Ported to kernel 2.1.119
- Use GCC extensions for structure initialisations
- Implemented async open notification
- Incremented devfsd protocol revision to 1
-===============================================================================
-Changes for patch v56
- Ported to kernel 2.1.120-pre3
- Moved async open notification to end of <devfs_open>
-===============================================================================
-Changes for patch v57
- Ported to kernel 2.1.121
- Prepended "/dev/" to module load request
- Renamed <call_kerneld> to <call_kmod>
- Created sample modules.conf file
-===============================================================================
-Changes for patch v58
- Fixed typo "AYSNC" -> "ASYNC"
-===============================================================================
-Changes for patch v59
- Added open flag for files
-===============================================================================
-Changes for patch v60
- Ported to kernel 2.1.123-pre2
-===============================================================================
-Changes for patch v61
- Set i_blocks=0 and i_blksize=1024 in <devfs_read_inode>
-===============================================================================
-Changes for patch v62
- Ported to kernel 2.1.123
-===============================================================================
-Changes for patch v63
- Ported to kernel 2.1.124-pre2
-===============================================================================
-Changes for patch v64
- Fixed Unix98 pty support
- Increased buffer size in <get_partition_list> to avoid crash and
-  burn
-===============================================================================
-Changes for patch v65
- More Unix98 pty support fixes
- Added test for empty <<name>> in <devfs_find_handle>
- Renamed <generate_path> to <devfs_generate_path> and published
- Created /dev/root symlink
-  Thanks to Roderich Schupp <rsch@ExperTeam.de>
-  with further modifications by me
-===============================================================================
-Changes for patch v66
- Yet more Unix98 pty support fixes (now tested)
- Created <devfs_get_fops>
- Support media change checks when CONFIG_DEVFS_ONLY=y
- Abolished Unix98-style PTY names for old PTY devices
-===============================================================================
-Changes for patch v67
- Added inline declaration for dummy <devfs_generate_path>
- Removed spurious "unable to register... in devfs" messages when
-  CONFIG_DEVFS_FS=n
- Fixed misc. devices when CONFIG_DEVFS_FS=n
- Limit auto-device numbering to majors 144 to 239
-===============================================================================
-Changes for patch v68
- Hide unopened virtual consoles from directory listings
- Added support for video capture devices
- Ported to kernel 2.1.125
-===============================================================================
-Changes for patch v69
- Fix for CONFIG_VT=n
-===============================================================================
-Changes for patch v70
- Added support for non-OSS/Free sound cards
-===============================================================================
-Changes for patch v71
- Ported to kernel 2.1.126-pre2
-===============================================================================
-Changes for patch v72
- #ifdef's for CONFIG_DEVFS_DISABLE_OLD_NAMES removed
-===============================================================================
-Changes for patch v73
- CONFIG_DEVFS_DISABLE_OLD_NAMES replaced with "nocompat" boot option
- CONFIG_DEVFS_BOOT_OPTIONS removed: boot options always available
-===============================================================================
-Changes for patch v74
- Removed CONFIG_DEVFS_MOUNT and "mount" boot option and replaced with
-  "nomount" boot option
- Documentation updates
- Updated sample modules.conf
-===============================================================================
-Changes for patch v75
- Updated sample modules.conf
- Remount devfs after initrd finishes
- Ported to kernel 2.1.127
- Added support for ISDN
-  Thanks to Christophe Leroy <christophe.leroy5@capway.com>
-===============================================================================
-Changes for patch v76
- Updated an email address in ChangeLog
- CONFIG_DEVFS_ONLY replaced with "only" boot option
-===============================================================================
-Changes for patch v77
- Added DEVFS_FL_REMOVABLE flag
- Check for disc change when listing directories with removable media
-  devices
- Use DEVFS_FL_REMOVABLE in sd.c
- Ported to kernel 2.1.128
-===============================================================================
-Changes for patch v78
- Only call <scan_dir_for_removable> on first call to <devfs_readdir>
- Ported to kernel 2.1.129-pre5
- ISDN support improvements
-  Thanks to Christophe Leroy <christophe.leroy5@capway.com>
-===============================================================================
-Changes for patch v79
- Ported to kernel 2.1.130
- Renamed miscdevice "apm" to "apm_bios" to be consistent with
-  devices.txt
-===============================================================================
-Changes for patch v80
- Ported to kernel 2.1.131
- Updated <devfs_rmdir> for VFS change in 2.1.131
-===============================================================================
-Changes for patch v81
- Fixed permissions on /dev/ptmx
-===============================================================================
-Changes for patch v82
- Ported to kernel 2.1.132-pre4
- Changed initial permissions on /dev/pts/*
- Created <devfs_mk_compat>
- Added "symlinks" boot option
- Changed devfs_register_blkdev() back to register_blkdev() for IDE
- Check for partitions on removable media in <devfs_lookup>
-===============================================================================
-Changes for patch v83
- Fixed support for ramdisc when using string-based root FS name
- Ported to kernel 2.2.0-pre1
-===============================================================================
-Changes for patch v84
- Ported to kernel 2.2.0-pre7
-===============================================================================
-Changes for patch v85
- Compile fixes for driver/sound/sound_common.c (non-module) and
-  drivers/isdn/isdn_common.c
-  Thanks to Christophe Leroy <christophe.leroy5@capway.com>
- Added support for registering regular files
- Created <devfs_set_file_size>
- Added /dev/cpu/mtrr as an alternative interface to /proc/mtrr
- Update devfs inodes from entries if not changed through FS
-===============================================================================
-Changes for patch v86
- Ported to kernel 2.2.0-pre9
-===============================================================================
-Changes for patch v87
- Fixed bug when mounting non-devfs devices in a devfs
-===============================================================================
-Changes for patch v88
- Fixed <devfs_fill_file> to only initialise temporary inodes
- Trap for NULL fops in <devfs_register>
- Return -ENODEV in <devfs_fill_file> for non-driver inodes
- Fixed bug when unswapping non-devfs devices in a devfs
-===============================================================================
-Changes for patch v89
- Switched to C data types in include/linux/devfs_fs.h
- Switched from PATH_MAX to DEVFS_PATHLEN
- Updated Documentation/filesystems/devfs/modules.conf to take account
-  of reverse scanning (!) by modprobe
- Ported to kernel 2.2.0
-===============================================================================
-Changes for patch v90
- CONFIG_DEVFS_DISABLE_OLD_TTY_NAMES replaced with "nottycompat" boot
-  option
- CONFIG_DEVFS_TTY_COMPAT removed: existing "symlinks" boot option now
-  controls this. This means you must have libc 5.4.44 or later, or a
-  recent version of libc 6 if you use the "symlinks" option
-===============================================================================
-Changes for patch v91
- Switch from <devfs_mk_symlink> to <devfs_mk_compat> in
-  drivers/char/vc_screen.c to fix problems with Midnight Commander
-===============================================================================
-Changes for patch v92
- Ported to kernel 2.2.2-pre5
-===============================================================================
-Changes for patch v93
- Modified <sd_name> in drivers/scsi/sd.c to cope with devices that
-  don't exist (which happens with new RAID autostart code printk()s)
-===============================================================================
-Changes for patch v94
- Fixed bug in joystick driver: only first joystick was registered
-===============================================================================
-Changes for patch v95
- Fixed another bug in joystick driver
- Fixed <devfsd_read> to not overrun event buffer
-===============================================================================
-Changes for patch v96
- Ported to kernel 2.2.5-2
- Created <devfs_auto_unregister>
- Fixed bugs: compatibility entries were not unregistered for:
-    loop driver
-    floppy driver
-    RAMDISC driver
-    IDE tape driver
-    SCSI CD-ROM driver
-    SCSI HDD driver
-===============================================================================
-Changes for patch v97
- Fixed bugs: compatibility entries were not unregistered for:
-    ALSA sound driver
-    partitions in generic disc driver
- Don't return unregistred entries in <devfs_find_handle>
- Panic in <devfs_unregister> if entry unregistered
- Don't panic in <devfs_auto_unregister> for duplicates
-===============================================================================
-Changes for patch v98
- Don't unregister already unregistered entries in <unregister>
- Register entry in <sd_detect>
- Unregister entry in <sd_detach>
- Changed to <devfs_*register_chrdev> in drivers/char/tty_io.c
- Ported to kernel 2.2.7
-===============================================================================
-Changes for patch v99
- Ported to kernel 2.2.8
- Fixed bug in drivers/scsi/sd.c when >16 SCSI discs
- Disable warning messages when unable to read partition table for
-  removable media
-===============================================================================
-Changes for patch v100
- Ported to kernel 2.3.1-pre5
- Added "oops-on-panic" boot option
- Improved debugging in <devfs_register> and <devfs_unregister>
- Register entry in <sr_detect>
- Unregister entry in <sr_detach>
- Register entry in <sg_detect>
- Unregister entry in <sg_detach>
- Added support for ALSA drivers
-===============================================================================
-Changes for patch v101
- Ported to kernel 2.3.2
-===============================================================================
-Changes for patch v102
- Update serial driver to register PCMCIA entries
-  Thanks to Roch-Alexandre Nomine-Beguin <roch@samarkand.infini.fr>
- Updated an email address in ChangeLog
- Hide virtual console capture entries from directory listings when
-  corresponding console device is not open
-===============================================================================
-Changes for patch v103
- Ported to kernel 2.3.3
-===============================================================================
-Changes for patch v104
- Added documentation for some functions
- Added "doc" target to fs/devfs/Makefile
- Added "v4l" directory for video4linux devices
- Replaced call to <devfs_unregister> in <sd_detach> with call to
-  <devfs_register_partitions>
- Moved registration for sr and sg drivers from detect() to attach()
-  methods
- Register entries in <st_attach> and unregister in <st_detach>
- Work around IDE driver treating CD-ROM as gendisk
- Use <sed> instead of <tr> in rc.devfs
- Updated ToDo list
- Removed "oops-on-panic" boot option: now always Oops
-===============================================================================
-Changes for patch v105
- Unregister SCSI host from <scsi_host_no_list> in <scsi_unregister>
-  Thanks to Zolt�n B�sz�rm�nyi <zboszor@mail.externet.hu>
- Don't save /dev/log in rc.devfs
- Ported to kernel 2.3.4-pre1
-===============================================================================
-Changes for patch v106
- Fixed silly typo in drivers/scsi/st.c
- Improved debugging in <devfs_register>
-===============================================================================
-Changes for patch v107
- Added "diunlink" and "nokmod" boot options
- Removed superfluous warning message in <devfs_d_iput>
-===============================================================================
-Changes for patch v108
- Remove entries when unloading sound module
-===============================================================================
-Changes for patch v109
- Ported to kernel 2.3.6-pre2
-===============================================================================
-Changes for patch v110
- Took account of change to <d_alloc_root>
-===============================================================================
-Changes for patch v111
- Created separate event queue for each mounted devfs
- Removed <devfs_invalidate_dcache>
- Created new ioctl()s for devfsd
- Incremented devfsd protocol revision to 3
- Fixed bug when re-creating directories: contents were lost
- Block access to inodes until devfsd updates permissions
-===============================================================================
-Changes for patch v112
- Modified patch so it applies against 2.3.5 and 2.3.6
- Updated an email address in ChangeLog
- Do not automatically change ownership/protection of /dev/tty<n>
- Updated sample modules.conf
- Switched to sending process uid/gid to devfsd
- Renamed <call_kmod> to <try_modload>
- Added DEVFSD_NOTIFY_LOOKUP event
- Added DEVFSD_NOTIFY_CHANGE event
- Added DEVFSD_NOTIFY_CREATE event
- Incremented devfsd protocol revision to 4
- Moved kernel-specific stuff to include/linux/devfs_fs_kernel.h
-===============================================================================
-Changes for patch v113
- Ported to kernel 2.3.9
- Restricted permissions on some block devices
-===============================================================================
-Changes for patch v114
- Added support for /dev/netlink
-  Thanks to Dennis Hou <smilax@mindmeld.yi.org>
- Return EISDIR rather than EINVAL for read(2) on directories
- Ported to kernel 2.3.10
-===============================================================================
-Changes for patch v115
- Added support for all remaining character devices
-  Thanks to Dennis Hou <smilax@mindmeld.yi.org>
- Cleaned up netlink support
-===============================================================================
-Changes for patch v116
- Added support for /dev/parport%d
-  Thanks to Tim Waugh <tim@cyberelk.demon.co.uk>
- Fixed parallel port ATAPI tape driver
- Fixed Atari SLM laser printer driver
-===============================================================================
-Changes for patch v117
- Added support for COSA card
-  Thanks to Dennis Hou <smilax@mindmeld.yi.org>
- Fixed drivers/char/ppdev.c: missing #include <linux/init.h>
- Fixed drivers/char/ftape/zftape/zftape-init.c
-  Thanks to Vladimir Popov <mashgrad@usa.net>
-===============================================================================
-Changes for patch v118
- Ported to kernel 2.3.15-pre3
- Fixed bug in loop driver
- Unregister /dev/lp%d entries in drivers/char/lp.c
-  Thanks to Maciej W. Rozycki <macro@ds2.pg.gda.pl>
-===============================================================================
-Changes for patch v119
- Ported to kernel 2.3.16
-===============================================================================
-Changes for patch v120
- Fixed bug in drivers/scsi/scsi.c
- Added /dev/ppp
-  Thanks to Dennis Hou <smilax@mindmeld.yi.org>
- Ported to kernel 2.3.17
-===============================================================================
-Changes for patch v121
- Fixed bug in drivers/block/loop.c
- Ported to kernel 2.3.18
-===============================================================================
-Changes for patch v122
- Ported to kernel 2.3.19
-===============================================================================
-Changes for patch v123
- Ported to kernel 2.3.20
-===============================================================================
-Changes for patch v124
- Ported to kernel 2.3.21
-===============================================================================
-Changes for patch v125
- Created <devfs_get_info>, <devfs_set_info>,
-  <devfs_get_first_child> and <devfs_get_next_sibling>
-  Added <<dir>> parameter to <devfs_register>, <devfs_mk_compat>,
-  <devfs_mk_dir> and <devfs_find_handle>
-  Work sponsored by SGI
- Fixed apparent bug in COSA driver
- Re-instated "scsihosts=" boot option
-===============================================================================
-Changes for patch v126
- Always create /dev/pts if CONFIG_UNIX98_PTYS=y
- Fixed call to <devfs_mk_dir> in drivers/block/ide-disk.c
-  Thanks to Dennis Hou <smilax@mindmeld.yi.org>
- Allow multiple unregistrations
- Created /dev/scsi hierarchy
-  Work sponsored by SGI
-===============================================================================
-Changes for patch v127
-Work sponsored by SGI
- No longer disable devpts if devfs enabled (caveat emptor)
- Added flags array to struct gendisk and removed code from
-  drivers/scsi/sd.c
- Created /dev/discs hierarchy
-===============================================================================
-Changes for patch v128
-Work sponsored by SGI
- Created /dev/cdroms hierarchy
-===============================================================================
-Changes for patch v129
-Work sponsored by SGI
- Removed compatibility entries for sound devices
- Removed compatibility entries for printer devices
- Removed compatibility entries for video4linux devices
- Removed compatibility entries for parallel port devices
- Removed compatibility entries for frame buffer devices
-===============================================================================
-Changes for patch v130
-Work sponsored by SGI
- Added major and minor number to devfsd protocol
- Incremented devfsd protocol revision to 5
- Removed compatibility entries for SoundBlaster CD-ROMs
- Removed compatibility entries for netlink devices
- Removed compatibility entries for SCSI generic devices
- Removed compatibility entries for SCSI tape devices
-===============================================================================
-Changes for patch v131
-Work sponsored by SGI
- Support info pointer for all devfs entry types
- Added <<info>> parameter to <devfs_mk_dir> and <devfs_mk_symlink>
- Removed /dev/st hierarchy
- Removed /dev/sg hierarchy
- Removed compatibility entries for loop devices
- Removed compatibility entries for IDE tape devices
- Removed compatibility entries for SCSI CD-ROMs
- Removed /dev/sr hierarchy
-===============================================================================
-Changes for patch v132
-Work sponsored by SGI
- Removed compatibility entries for floppy devices
- Removed compatibility entries for RAMDISCs
- Removed compatibility entries for meta-devices
- Removed compatibility entries for SCSI discs
- Created <devfs_make_root>
- Removed /dev/sd hierarchy
- Support "../" when searching devfs namespace
- Created /dev/ide/host* hierarchy
- Supported IDE hard discs in /dev/ide/host* hierarchy
- Removed compatibility entries for IDE discs
- Removed /dev/ide/hd hierarchy
- Supported IDE CD-ROMs in /dev/ide/host* hierarchy
- Removed compatibility entries for IDE CD-ROMs
- Removed /dev/ide/cd hierarchy
-===============================================================================
-Changes for patch v133
-Work sponsored by SGI
- Created <devfs_get_unregister_slave>
- Fixed bug in fs/partitions/check.c when rescanning
-===============================================================================
-Changes for patch v134
-Work sponsored by SGI
- Removed /dev/sd, /dev/sr, /dev/st and /dev/sg directories
- Removed /dev/ide/hd directory
- Exported <devfs_get_parent>
- Created <devfs_register_tape> and /dev/tapes hierarchy
- Removed /dev/ide/mt hierarchy
- Removed /dev/ide/fd hierarchy
- Ported to kernel 2.3.25
-===============================================================================
-Changes for patch v135
-Work sponsored by SGI
- Removed compatibility entries for virtual console capture devices
- Removed unused <devfs_set_symlink_destination>
- Removed compatibility entries for serial devices
- Removed compatibility entries for console devices
- Do not hide entries from devfsd or children
- Removed DEVFS_FL_TTY_COMPAT flag
- Removed "nottycompat" boot option
- Removed <devfs_mk_compat>
-===============================================================================
-Changes for patch v136
-Work sponsored by SGI
- Moved BSD pty devices to /dev/pty
- Added DEVFS_FL_WAIT flag
-===============================================================================
-Changes for patch v137
-Work sponsored by SGI
- Really fixed bug in fs/partitions/check.c when rescanning
- Support new "disc" naming scheme in <get_removable_partition>
- Allow NULL fops in <devfs_register>
- Removed redundant name functions in SCSI disc and IDE drivers
-===============================================================================
-Changes for patch v138
-Work sponsored by SGI
- Fixed old bugs in drivers/block/paride/pt.c, drivers/char/tpqic02.c,
-  drivers/net/wan/cosa.c and drivers/scsi/scsi.c
-  Thanks to Sergey Kubushin <ksi@ksi-linux.com>
- Fall back to major table if NULL fops given to <devfs_register>
-===============================================================================
-Changes for patch v139
-Work sponsored by SGI
- Corrected and moved <get_blkfops> and <get_chrfops> declarations
-  from arch/alpha/kernel/osf_sys.c to include/linux/fs.h
- Removed name function from struct gendisk
- Updated devfs FAQ
-===============================================================================
-Changes for patch v140
-Work sponsored by SGI
- Ported to kernel 2.3.27
-===============================================================================
-Changes for patch v141
-Work sponsored by SGI
- Bug fix in arch/m68k/atari/joystick.c
- Moved ISDN and capi devices to /dev/isdn
-===============================================================================
-Changes for patch v142
-Work sponsored by SGI
- Bug fix in drivers/block/ide-probe.c (patch confusion)
-===============================================================================
-Changes for patch v143
-Work sponsored by SGI
- Bug fix in drivers/block/blkpg.c:partition_name()
-===============================================================================
-Changes for patch v144
-Work sponsored by SGI
- Ported to kernel 2.3.29
- Removed calls to <devfs_register> from cdu31a, cm206, mcd and mcdx
-  CD-ROM drivers: generic driver handles this now
- Moved joystick devices to /dev/joysticks
-===============================================================================
-Changes for patch v145
-Work sponsored by SGI
- Ported to kernel 2.3.30-pre3
- Register whole-disc entry even for invalid partition tables
- Fixed bug in mounting root FS when initrd enabled
- Fixed device entry leak with IDE CD-ROMs
- Fixed compile problem with drivers/isdn/isdn_common.c
- Moved COSA devices to /dev/cosa
- Support fifos when unregistering
- Created <devfs_register_series> and used in many drivers
- Moved Coda devices to /dev/coda
- Moved parallel port IDE tapes to /dev/pt
- Moved parallel port IDE generic devices to /dev/pg
-===============================================================================
-Changes for patch v146
-Work sponsored by SGI
- Removed obsolete DEVFS_FL_COMPAT and DEVFS_FL_TOLERANT flags
- Fixed compile problem with fs/coda/psdev.c
- Reinstate change to <devfs_register_blkdev> in
-  drivers/block/ide-probe.c now that fs/isofs/inode.c is fixed
- Switched to <devfs_register_blkdev> in drivers/block/floppy.c,
-  drivers/scsi/sr.c and drivers/block/md.c
- Moved DAC960 devices to /dev/dac960
-===============================================================================
-Changes for patch v147
-Work sponsored by SGI
- Ported to kernel 2.3.32-pre4
-===============================================================================
-Changes for patch v148
-Work sponsored by SGI
- Removed kmod support: use devfsd instead
- Moved miscellaneous character devices to /dev/misc
-===============================================================================
-Changes for patch v149
-Work sponsored by SGI
- Ensure include/linux/joystick.h is OK for user-space
- Improved debugging in <get_vfs_inode>
- Ensure dentries created by devfsd will be cleaned up
-===============================================================================
-Changes for patch v150
-Work sponsored by SGI
- Ported to kernel 2.3.34
-===============================================================================
-Changes for patch v151
-Work sponsored by SGI
- Ported to kernel 2.3.35-pre1
- Created <devfs_get_name>
-===============================================================================
-Changes for patch v152
-Work sponsored by SGI
- Updated sample modules.conf
- Ported to kernel 2.3.36-pre1
-===============================================================================
-Changes for patch v153
-Work sponsored by SGI
- Ported to kernel 2.3.42
- Removed <devfs_fill_file>
-===============================================================================
-Changes for patch v154
-Work sponsored by SGI
- Took account of device number changes for /dev/fb*
-===============================================================================
-Changes for patch v155
-Work sponsored by SGI
- Ported to kernel 2.3.43-pre8
- Moved /dev/tty0 to /dev/vc/0
- Moved sequence number formatting from <_tty_make_name> to drivers
-===============================================================================
-Changes for patch v156
-Work sponsored by SGI
- Fixed breakage in drivers/scsi/sd.c due to recent SCSI changes
-===============================================================================
-Changes for patch v157
-Work sponsored by SGI
- Ported to kernel 2.3.45
-===============================================================================
-Changes for patch v158
-Work sponsored by SGI
- Ported to kernel 2.3.46-pre2
-===============================================================================
-Changes for patch v159
-Work sponsored by SGI
- Fixed drivers/block/md.c
-  Thanks to Mike Galbraith <mikeg@weiden.de>
- Documentation fixes
- Moved device registration from <lp_init> to <lp_register>
-  Thanks to Tim Waugh <twaugh@redhat.com>
-===============================================================================
-Changes for patch v160
-Work sponsored by SGI
- Fixed drivers/char/joystick/joystick.c
-  Thanks to Vojtech Pavlik <vojtech@suse.cz>
- Documentation updates
- Fixed arch/i386/kernel/mtrr.c if procfs and devfs not enabled
- Fixed drivers/char/stallion.c
-===============================================================================
-Changes for patch v161
-Work sponsored by SGI
- Remove /dev/ide when ide-mod is unloaded
- Fixed bug in drivers/block/ide-probe.c when secondary but no primary
- Added DEVFS_FL_NO_PERSISTENCE flag
- Used new DEVFS_FL_NO_PERSISTENCE flag for Unix98 pty slaves
- Removed unnecessary call to <update_devfs_inode_from_entry> in
-  <devfs_readdir>
- Only set auto-ownership for /dev/pty/s*
-===============================================================================
-Changes for patch v162
-Work sponsored by SGI
- Set inode->i_size to correct size for symlinks
-  Thanks to Jeremy Fitzhardinge <jeremy@goop.org>
- Only give lookup() method to directories to comply with new VFS
-  assumptions
- Remove unnecessary tests in symlink methods
- Don't kill existing block ops in <devfs_read_inode>
- Restore auto-ownership for /dev/pty/m*
-===============================================================================
-Changes for patch v163
-Work sponsored by SGI
- Don't create missing directories in <devfs_find_handle>
- Removed Documentation/filesystems/devfs/mk-devlinks
- Updated Documentation/filesystems/devfs/README
-===============================================================================
-Changes for patch v164
-Work sponsored by SGI
- Fixed CONFIG_DEVFS breakage in drivers/char/serial.c introduced in
-  linux-2.3.99-pre6-7
-===============================================================================
-Changes for patch v165
-Work sponsored by SGI
- Ported to kernel 2.3.99-pre6
-===============================================================================
-Changes for patch v166
-Work sponsored by SGI
- Added CONFIG_DEVFS_MOUNT
-===============================================================================
-Changes for patch v167
-Work sponsored by SGI
- Updated Documentation/filesystems/devfs/README
- Updated sample modules.conf
-===============================================================================
-Changes for patch v168
-Work sponsored by SGI
- Disabled multi-mount capability (use VFS bindings instead)
- Updated README from master HTML file
-===============================================================================
-Changes for patch v169
-Work sponsored by SGI
- Removed multi-mount code
- Removed compatibility macros: VFS has changed too much
-===============================================================================
-Changes for patch v170
-Work sponsored by SGI
- Updated README from master HTML file
- Merged devfs inode into devfs entry
-===============================================================================
-Changes for patch v171
-Work sponsored by SGI
- Updated sample modules.conf
- Removed dead code in <devfs_register> which used to call
-  <free_dentries>
- Ported to kernel 2.4.0-test2-pre3
-===============================================================================
-Changes for patch v172
-Work sponsored by SGI
- Changed interface to <devfs_register>
- Changed interface to <devfs_register_series>
-===============================================================================
-Changes for patch v173
-Work sponsored by SGI
- Simplified interface to <devfs_mk_symlink>
- Simplified interface to <devfs_mk_dir>
- Simplified interface to <devfs_find_handle>
-===============================================================================
-Changes for patch v174
-Work sponsored by SGI
- Updated README from master HTML file
-===============================================================================
-Changes for patch v175
-Work sponsored by SGI
- DocBook update for fs/devfs/base.c
-  Thanks to Tim Waugh <twaugh@redhat.com>
- Removed stale fs/tunnel.c (was never used or completed)
-===============================================================================
-Changes for patch v176
-Work sponsored by SGI
- Updated ToDo list
- Removed sample modules.conf: now distributed with devfsd
- Updated README from master HTML file
- Ported to kernel 2.4.0-test3-pre4 (which had devfs-patch-v174)
-===============================================================================
-Changes for patch v177
- Updated README from master HTML file
- Documentation cleanups
- Ensure <devfs_generate_path> terminates string for root entry
-  Thanks to Tim Jansen <tim@tjansen.de>
- Exported <devfs_get_name> to modules
- Make <devfs_mk_symlink> send events to devfsd
- Cleaned up option processing in <devfs_setup>
- Fixed bugs in handling symlinks: could leak or cause Oops
- Cleaned up directory handling by separating fops
-  Thanks to Alexander Viro <viro@parcelfarce.linux.theplanet.co.uk>
-===============================================================================
-Changes for patch v178
- Fixed handling of inverted options in <devfs_setup>
-===============================================================================
-Changes for patch v179
- Adjusted <try_modload> to account for <devfs_generate_path> fix
-===============================================================================
-Changes for patch v180
- Fixed !CONFIG_DEVFS_FS stub declaration of <devfs_get_info>
-===============================================================================
-Changes for patch v181
- Answered question posed by Al Viro and removed his comments from <devfs_open>
- Moved setting of registered flag after other fields are changed
- Fixed race between <devfsd_close> and <devfsd_notify_one>
- Global VFS changes added bogus BKL to devfsd_close(): removed
- Widened locking in <devfs_readlink> and <devfs_follow_link>
- Replaced <devfsd_read> stack usage with <devfsd_ioctl> kmalloc
- Simplified locking in <devfsd_ioctl> and fixed memory leak
-===============================================================================
-Changes for patch v182
- Created <devfs_*alloc_major> and <devfs_*alloc_devnum>
- Removed broken devnum allocation and use <devfs_alloc_devnum>
- Fixed old devnum leak by calling new <devfs_dealloc_devnum>
- Created <devfs_*alloc_unique_number>
- Fixed number leak for /dev/cdroms/cdrom%d
- Fixed number leak for /dev/discs/disc%d
-===============================================================================
-Changes for patch v183
- Fixed bug in <devfs_setup> which could hang boot process
-===============================================================================
-Changes for patch v184
- Documentation typo fix for fs/devfs/util.c
- Fixed drivers/char/stallion.c for devfs
- Added DEVFSD_NOTIFY_DELETE event
- Updated README from master HTML file
- Removed #include <asm/segment.h> from fs/devfs/base.c
-===============================================================================
-Changes for patch v185
- Made <block_semaphore> and <char_semaphore> in fs/devfs/util.c
-  private
- Fixed inode table races by removing it and using inode->u.generic_ip
-  instead
- Moved <devfs_read_inode> into <get_vfs_inode>
- Moved <devfs_write_inode> into <devfs_notify_change>
-===============================================================================
-Changes for patch v186
- Fixed race in <devfs_do_symlink> for uni-processor
- Updated README from master HTML file
-===============================================================================
-Changes for patch v187
- Fixed drivers/char/stallion.c for devfs
- Fixed drivers/char/rocket.c for devfs
- Fixed bug in <devfs_alloc_unique_number>: limited to 128 numbers
-===============================================================================
-Changes for patch v188
- Updated major masks in fs/devfs/util.c up to Linus' "no new majors"
-  proclamation. Block: were 126 now 122 free, char: were 26 now 19 free
- Updated README from master HTML file
- Removed remnant of multi-mount support in <devfs_mknod>
- Removed unused DEVFS_FL_SHOW_UNREG flag
-===============================================================================
-Changes for patch v189
- Removed nlink field from struct devfs_inode
- Removed auto-ownership for /dev/pty/* (BSD ptys) and used
-  DEVFS_FL_CURRENT_OWNER|DEVFS_FL_NO_PERSISTENCE for /dev/pty/s* (just
-  like Unix98 pty slaves) and made /dev/pty/m* rw-rw-rw- access
-===============================================================================
-Changes for patch v190
- Updated README from master HTML file
- Replaced BKL with global rwsem to protect symlink data (quick and
-  dirty hack)
-===============================================================================
-Changes for patch v191
- Replaced global rwsem for symlink with per-link refcount
-===============================================================================
-Changes for patch v192
- Removed unnecessary #ifdef CONFIG_DEVFS_FS from arch/i386/kernel/mtrr.c
- Ported to kernel 2.4.10-pre11
- Set inode->i_mapping->a_ops for block nodes in <get_vfs_inode>
-===============================================================================
-Changes for patch v193
- Went back to global rwsem for symlinks (refcount scheme no good)
-===============================================================================
-Changes for patch v194
- Fixed overrun in <devfs_link> by removing function (not needed)
- Updated README from master HTML file
-===============================================================================
-Changes for patch v195
- Fixed buffer underrun in <try_modload>
- Moved down_read() from <search_for_entry_in_dir> to <find_entry>
-===============================================================================
-Changes for patch v196
- Fixed race in <devfsd_ioctl> when setting event mask
-  Thanks to Kari Hurtta <hurtta@leija.mh.fmi.fi>
- Avoid deadlock in <devfs_follow_link> by using temporary buffer
-===============================================================================
-Changes for patch v197
- First release of new locking code for devfs core (v1.0)
- Fixed bug in drivers/cdrom/cdrom.c
-===============================================================================
-Changes for patch v198
- Discard temporary buffer, now use "%s" for dentry names
- Don't generate path in <try_modload>: use fake entry instead
- Use "existing" directory in <_devfs_make_parent_for_leaf>
- Use slab cache rather than fixed buffer for devfsd events
-===============================================================================
-Changes for patch v199
- Removed obsolete usage of DEVFS_FL_NO_PERSISTENCE
- Send DEVFSD_NOTIFY_REGISTERED events in <devfs_mk_dir>
- Fixed locking bug in <devfs_d_revalidate_wait> due to typo
- Do not send CREATE, CHANGE, ASYNC_OPEN or DELETE events from devfsd
-  or children
-===============================================================================
-Changes for patch v200
- Ported to kernel 2.5.1-pre2
-===============================================================================
-Changes for patch v201
- Fixed bug in <devfsd_read>: was dereferencing freed pointer
-===============================================================================
-Changes for patch v202
- Fixed bug in <devfsd_close>: was dereferencing freed pointer
- Added process group check for devfsd privileges
-===============================================================================
-Changes for patch v203
- Use SLAB_ATOMIC in <devfsd_notify_de> from <devfs_d_delete>
-===============================================================================
-Changes for patch v204
- Removed long obsolete rc.devfs
- Return old entry in <devfs_mk_dir> for 2.4.x kernels
- Updated README from master HTML file
- Increment refcount on module in <check_disc_changed>
- Created <devfs_get_handle> and exported <devfs_put>
- Increment refcount on module in <devfs_get_ops>
- Created <devfs_put_ops> and used where needed to fix races
- Added clarifying comments in response to preliminary EMC code review
- Added poisoning to <devfs_put>
- Improved debugging messages
- Fixed unregister bugs in drivers/md/lvm-fs.c
-===============================================================================
-Changes for patch v205
- Corrected (made useful) debugging message in <unregister>
- Moved <kmem_cache_create> in <mount_devfs_fs> to <init_devfs_fs>
- Fixed drivers/md/lvm-fs.c to create "lvm" entry
- Added magic number to guard against scribbling drivers
- Only return old entry in <devfs_mk_dir> if a directory
- Defined macros for error and debug messages
- Updated README from master HTML file
-===============================================================================
-Changes for patch v206
- Added support for multiple Compaq cpqarray controllers
- Fixed (rare, old) race in <devfs_lookup>
-===============================================================================
-Changes for patch v207
- Fixed deadlock bug in <devfs_d_revalidate_wait>
- Tag VFS deletable in <devfs_mk_symlink> if handle ignored
- Updated README from master HTML file
-===============================================================================
-Changes for patch v208
- Added KERN_* to remaining messages
- Cleaned up declaration of <stat_read>
- Updated README from master HTML file
-===============================================================================
-Changes for patch v209
- Updated README from master HTML file
- Removed silently introduced calls to lock_kernel() and
-  unlock_kernel() due to recent VFS locking changes. BKL isn't
-  required in devfs 
- Changed <devfs_rmdir> to allow later additions if not yet empty
- Added calls to <devfs_register_partitions> in drivers/block/blkpc.c
-  <add_partition> and <del_partition>
- Fixed bug in <devfs_alloc_unique_number>: was clearing beyond
-  bitfield
- Fixed bitfield data type for <devfs_*alloc_devnum>
- Made major bitfield type and initialiser 64 bit safe
-===============================================================================
-Changes for patch v210
- Updated fs/devfs/util.c to fix shift warning on 64 bit machines
-  Thanks to Anton Blanchard <anton@samba.org>
- Updated README from master HTML file
-===============================================================================
-Changes for patch v211
- Do not put miscellaneous character devices in /dev/misc if they
-  specify their own directory (i.e. contain a '/' character)
- Copied macro for error messages from fs/devfs/base.c to
-  fs/devfs/util.c and made use of this macro
- Removed 2.4.x compatibility code from fs/devfs/base.c
-===============================================================================
-Changes for patch v212
- Added BKL to <devfs_open> because drivers still need it
-===============================================================================
-Changes for patch v213
- Protected <scan_dir_for_removable> and <get_removable_partition>
-  from changing directory contents
-===============================================================================
-Changes for patch v214
- Switched to ISO C structure field initialisers
- Switch to set_current_state() and move before add_wait_queue()
- Updated README from master HTML file
- Fixed devfs entry leak in <devfs_readdir> when *readdir fails
-===============================================================================
-Changes for patch v215
- Created <devfs_find_and_unregister>
- Switched many functions from <devfs_find_handle> to
-  <devfs_find_and_unregister>
- Switched many functions from <devfs_find_handle> to <devfs_get_handle>
-===============================================================================
-Changes for patch v216
- Switched arch/ia64/sn/io/hcl.c from <devfs_find_handle> to
-  <devfs_get_handle>
- Removed deprecated <devfs_find_handle>
-===============================================================================
-Changes for patch v217
- Exported <devfs_find_and_unregister> and <devfs_only> to modules
- Updated README from master HTML file
- Fixed module unload race in <devfs_open>
-===============================================================================
-Changes for patch v218
- Removed DEVFS_FL_AUTO_OWNER flag
- Switched lingering structure field initialiser to ISO C
- Added locking when setting/clearing flags
- Documentation fix in fs/devfs/util.c
diff --git a/Documentation/filesystems/devfs/README b/Documentation/filesystems/devfs/README
deleted file mode 100644
index aabfba24bc2e..000000000000
--- a/Documentation/filesystems/devfs/README
+++ /dev/null
@@ -1,1959 +0,0 @@
-Devfs (Device File System) FAQ
-Linux Devfs (Device File System) FAQ
-Richard Gooch
-20-AUG-2002
-Document languages:
-----------------------------------------------------------------------------
-NOTE: the master copy of this document is available online at:
-http://www.atnf.csiro.au/~rgooch/linux/docs/devfs.html
-and looks much better than the text version distributed with the
-kernel sources. A mirror site is available at:
-http://www.ras.ucalgary.ca/~rgooch/linux/docs/devfs.html
-There is also an optional daemon that may be used with devfs. You can
-find out more about it at:
-http://www.atnf.csiro.au/~rgooch/linux/
-A mailing list is available which you may subscribe to. Send
-email
-to majordomo@oss.sgi.com with the following line in the
-body of the message:
-subscribe devfs
-To unsubscribe, send the message body:
-unsubscribe devfs
-instead. The list is archived at
-http://oss.sgi.com/projects/devfs/archive/.
-----------------------------------------------------------------------------
-Contents
-What is it?
-Why do it?
-Who else does it?
-How it works
-Operational issues (essential reading)
-Instructions for the impatient
-Permissions persistence across reboots
-Dealing with drivers without devfs support
-All the way with Devfs
-Other Issues
-Kernel Naming Scheme
-Devfsd Naming Scheme
-Old Compatibility Names
-SCSI Host Probing Issues
-Device drivers currently ported
-Allocation of Device Numbers
-Questions and Answers
-Making things work
-Alternatives to devfs
-What I don't like about devfs
-How to report bugs
-Strange kernel messages
-Compilation problems with devfsd
-Other resources
-Translations of this document
-----------------------------------------------------------------------------
-What is it?
-Devfs is an alternative to "real" character and block special devices
-on your root filesystem. Kernel device drivers can register devices by
-name rather than major and minor numbers. These devices will appear in
-devfs automatically, with whatever default ownership and
-protection the driver specified. A daemon (devfsd) can be used to
-override these defaults. Devfs has been in the kernel since 2.3.46.
-NOTE that devfs is entirely optional. If you prefer the old
-disc-based device nodes, then simply leave CONFIG_DEVFS_FS=n (the
-default). In this case, nothing will change.  ALSO NOTE that if you do
-enable devfs, the defaults are such that full compatibility is
-maintained with the old devices names.
-There are two aspects to devfs: one is the underlying device
-namespace, which is a namespace just like any mounted filesystem. The
-other aspect is the filesystem code which provides a view of the
-device namespace. The reason I make a distinction is because devfs
-can be mounted many times, with each mount showing the same device
-namespace. Changes made are global to all mounted devfs filesystems.
-Also, because the devfs namespace exists without any devfs mounts, you
-can easily mount the root filesystem by referring to an entry in the
-devfs namespace.
-The cost of devfs is a small increase in kernel code size and memory
-usage. About 7 pages of code (some of that in __init sections) and 72
-bytes for each entry in the namespace. A modest system has only a
-couple of hundred device entries, so this costs a few more
-pages. Compare this with the suggestion to put /dev on a <a
-href="#why-faq-ramdisc">ramdisc.
-On a typical machine, the cost is under 0.2 percent. On a modest
-system with 64 MBytes of RAM, the cost is under 0.1 percent.  The
-accusations of "bloatware" levelled at devfs are not justified.
-----------------------------------------------------------------------------
-Why do it?
-There are several problems that devfs addresses. Some of these
-problems are more serious than others (depending on your point of
-view), and some can be solved without devfs. However, the totality of
-these problems really calls out for devfs.
-The choice is a patchwork of inefficient user space solutions, which
-are complex and likely to be fragile, or to use a simple and efficient
-devfs which is robust.
-There have been many counter-proposals to devfs, all seeking to
-provide some of the benefits without actually implementing devfs. So
-far there has been an absence of code and no proposed alternative has
-been able to provide all the features that devfs does. Further,
-alternative proposals require far more complexity in user-space (and
-still deliver less functionality than devfs). Some people have the
-mantra of reducing "kernel bloat", but don't consider the effects on
-user-space.
-A good solution limits the total complexity of kernel-space and
-user-space.
-Major&minor allocation
-The existing scheme requires the allocation of major and minor device
-numbers for each and every device. This means that a central
-co-ordinating authority is required to issue these device numbers
-(unless you're developing a "private" device driver), in order to
-preserve uniqueness. Devfs shifts the burden to a namespace. This may
-not seem like a huge benefit, but actually it is. Since driver authors
-will naturally choose a device name which reflects the functionality
-of the device, there is far less potential for namespace conflict.
-Solving this requires a kernel change.
-/dev management
-Because you currently access devices through device nodes, these must
-be created by the system administrator. For standard devices you can
-usually find a MAKEDEV programme which creates all these (hundreds!)
-of nodes. This means that changes in the kernel must be reflected by
-changes in the MAKEDEV programme, or else the system administrator
-creates device nodes by hand.
-The basic problem is that there are two separate databases of
-major and minor numbers. One is in the kernel and one is in /dev (or
-in a MAKEDEV programme, if you want to look at it that way). This is
-duplication of information, which is not good practice.
-Solving this requires a kernel change.
-/dev growth
-A typical /dev has over 1200 nodes! Most of these devices simply don't
-exist because the hardware is not available. A huge /dev increases the
-time to access devices (I'm just referring to the dentry lookup times
-and the time taken to read inodes off disc: the next subsection shows
-some more horrors).
-An example of how big /dev can grow is if we consider SCSI devices:
-host           6  bits  (say up to 64 hosts on a really big machine)
-channel        4  bits  (say up to 16 SCSI buses per host)
-id             4  bits
-lun            3  bits
-partition      6  bits
-TOTAL          23 bits
-This requires 8 Mega (1024*1024) inodes if we want to store all
-possible device nodes. Even if we scrap everything but id,partition
-and assume a single host adapter with a single SCSI bus and only one
-logical unit per SCSI target (id), that's still 10 bits or 1024
-inodes. Each VFS inode takes around 256 bytes (kernel 2.1.78), so
-that's 256 kBytes of inode storage on disc (assuming real inodes take
-a similar amount of space as VFS inodes). This is actually not so bad,
-because disc is cheap these days. Embedded systems would care about
-256 kBytes of /dev inodes, but you could argue that embedded systems
-would have hand-tuned /dev directories. I've had to do just that on my
-embedded systems, but I would rather just leave it to devfs.
-Another issue is the time taken to lookup an inode when first
-referenced. Not only does this take time in scanning through a list in
-memory, but also the seek times to read the inodes off disc.
-This could be solved in user-space using a clever programme which
-scanned the kernel logs and deleted /dev entries which are not
-available and created them when they were available. This programme
-would need to be run every time a new module was loaded, which would
-slow things down a lot.
-There is an existing programme called scsidev which will automatically
-create device nodes for SCSI devices. It can do this by scanning files
-in /proc/scsi. Unfortunately, to extend this idea to other device
-nodes would require significant modifications to existing drivers (so
-they too would provide information in /proc). This is a non-trivial
-change (I should know: devfs has had to do something similar). Once
-you go to this much effort, you may as well use devfs itself (which
-also provides this information).  Furthermore, such a system would
-likely be implemented in an ad-hoc fashion, as different drivers will
-provide their information in different ways.
-Devfs is much cleaner, because it (naturally) has a uniform mechanism
-to provide this information: the device nodes themselves!
-Node to driver file_operations translation
-There is an important difference between the way disc-based character
-and block nodes and devfs entries make the connection between an entry
-in /dev and the actual device driver.
-With the current 8 bit major and minor numbers the connection between
-disc-based c&b nodes and per-major drivers is done through a
-fixed-length table of 128 entries. The various filesystem types set
-the inode operations for c&b nodes to {chr,blk}dev_inode_operations,
-so when a device is opened a few quick levels of indirection bring us
-to the driver file_operations.
-For miscellaneous character devices a second step is required: there
-is a scan for the driver entry with the same minor number as the file
-that was opened, and the appropriate minor open method is called. This
-scanning is done *every time* you open a device node. Potentially, you
-may be searching through dozens of misc. entries before you find your
-open method. While not an enormous performance overhead, this does
-seem pointless.
-Linux *must* move beyond the 8 bit major and minor barrier,
-somehow. If we simply increase each to 16 bits, then the indexing
-scheme used for major driver lookup becomes untenable, because the
-major tables (one each for character and block devices) would need to
-be 64 k entries long (512 kBytes on x86, 1 MByte for 64 bit
-systems). So we would have to use a scheme like that used for
-miscellaneous character devices, which means the search time goes up
-linearly with the average number of major device drivers on your
-system. Not all "devices" are hardware, some are higher-level drivers
-like KGI, so you can get more "devices" without adding hardware
-You can improve this by creating an ordered (balanced:-)
-binary tree, in which case your search time becomes log(N).
-Alternatively, you can use hashing to speed up the search.
-But why do that search at all if you don't have to? Once again, it
-seems pointless.
-Note that devfs doesn't use the major&minor system. For devfs
-entries, the connection is done when you lookup the /dev entry. When
-devfs_register() is called, an internal table is appended which has
-the entry name and the file_operations. If the dentry cache doesn't
-have the /dev entry already, this internal table is scanned to get the
-file_operations, and an inode is created. If the dentry cache already
-has the entry, there is *no lookup time* (other than the dentry scan
-itself, but we can't avoid that anyway, and besides Linux dentries
-cream other OS's which don't have them:-). Furthermore, the number of
-node entries in a devfs is only the number of available device
-entries, not the number of *conceivable* entries. Even if you remove
-unnecessary entries in a disc-based /dev, the number of conceivable
-entries remains the same: you just limit yourself in order to save
-space.
-Devfs provides a fast connection between a VFS node and the device
-driver, in a scalable way.
-/dev as a system administration tool
-Right now /dev contains a list of conceivable devices, most of which I
-don't have. Devfs only shows those devices available on my
-system. This means that listing /dev is a handy way of checking what
-devices are available.
-Major&minor size
-Existing major and minor numbers are limited to 8 bits each. This is
-now a limiting factor for some drivers, particularly the SCSI disc
-driver, which consumes a single major number. Only 16 discs are
-supported, and each disc may have only 15 partitions. Maybe this isn't
-a problem for you, but some of us are building huge Linux systems with
-disc arrays. With devfs an arbitrary pointer can be associated with
-each device entry, which can be used to give an effective 32 bit
-device identifier (i.e. that's like having a 32 bit minor
-number). Since this is private to the kernel, there are no C library
-compatibility issues which you would have with increasing major and
-minor number sizes. See the section on "Allocation of Device Numbers"
-for details on maintaining compatibility with userspace.
-Solving this requires a kernel change.
-Since writing this, the kernel has been modified so that the SCSI disc
-driver has more major numbers allocated to it and now supports up to
-128 discs. Since these major numbers are non-contiguous (a result of
-unplanned expansion), the implementation is a little more cumbersome
-than originally.
-Just like the changes to IPv4 to fix impending limitations in the
-address space, people find ways around the limitations. In the long
-run, however, solutions like IPv6 or devfs can't be put off forever.
-Read-only root filesystem
-Having your device nodes on the root filesystem means that you can't
-operate properly with a read-only root filesystem. This is because you
-want to change ownerships and protections of tty devices. Existing
-practice prevents you using a CD-ROM as your root filesystem for a
-*real* system. Sure, you can boot off a CD-ROM, but you can't change
-tty ownerships, so it's only good for installing.
-Also, you can't use a shared NFS root filesystem for a cluster of
-discless Linux machines (having tty ownerships changed on a common
-/dev is not good). Nor can you embed your root filesystem in a
-ROM-FS.
-You can get around this by creating a RAMDISC at boot time, making
-an ext2 filesystem in it, mounting it somewhere and copying the
-contents of /dev into it, then unmounting it and mounting it over
-/dev.
-A devfs is a cleaner way of solving this.
-Non-Unix root filesystem
-Non-Unix filesystems (such as NTFS) can't be used for a root
-filesystem because they variously don't support character and block
-special files or symbolic links. You can't have a separate disc-based
-or RAMDISC-based filesystem mounted on /dev because you need device
-nodes before you can mount these. Devfs can be mounted without any
-device nodes. Devlinks won't work because symlinks aren't supported.
-An alternative solution is to use initrd to mount a RAMDISC initial
-root filesystem (which is populated with a minimal set of device
-nodes), and then construct a new /dev in another RAMDISC, and finally
-switch to your non-Unix root filesystem. This requires clever boot
-scripts and a fragile and conceptually complex boot procedure.
-Devfs solves this in a robust and conceptually simple way.
-PTY security
-Current pseudo-tty (pty) devices are owned by root and read-writable
-by everyone. The user of a pty-pair cannot change
-ownership/protections without being suid-root.
-This could be solved with a secure user-space daemon which runs as
-root and does the actual creation of pty-pairs. Such a daemon would
-require modification to *every* programme that wants to use this new
-mechanism. It also slows down creation of pty-pairs.
-An alternative is to create a new open_pty() syscall which does much
-the same thing as the user-space daemon. Once again, this requires
-modifications to pty-handling programmes.
-The devfs solution allows a device driver to "tag" certain device
-files so that when an unopened device is opened, the ownerships are
-changed to the current euid and egid of the opening process, and the
-protections are changed to the default registered by the driver. When
-the device is closed ownership is set back to root and protections are
-set back to read-write for everybody. No programme need be changed.
-The devpts filesystem provides this auto-ownership feature for Unix98
-ptys. It doesn't support old-style pty devices, nor does it have all
-the other features of devfs.
-Intelligent device management
-Devfs implements a simple yet powerful protocol for communication with
-a device management daemon (devfsd) which runs in user space. It is
-possible to send a message (either synchronously or asynchronously) to
-devfsd on any event, such as registration/unregistration of device
-entries, opening and closing devices, looking up inodes, scanning
-directories and more. This has many possibilities. Some of these are
-already implemented. See:
-http://www.atnf.csiro.au/~rgooch/linux/
-Device entry registration events can be used by devfsd to change
-permissions of newly-created device nodes. This is one mechanism to
-control device permissions.
-Device entry registration/unregistration events can be used to run
-programmes or scripts. This can be used to provide automatic mounting
-of filesystems when a new block device media is inserted into the
-drive.
-Asynchronous device open and close events can be used to implement
-clever permissions management. For example, the default permissions on
-/dev/dsp do not allow everybody to read from the device. This is
-sensible, as you don't want some remote user recording what you say at
-your console. However, the console user is also prevented from
-recording. This behaviour is not desirable. With asynchronous device
-open and close events, you can have devfsd run a programme or script
-when console devices are opened to change the ownerships for *other*
-device nodes (such as /dev/dsp). On closure, you can run a different
-script to restore permissions. An advantage of this scheme over
-modifying the C library tty handling is that this works even if your
-programme crashes (how many times have you seen the utmp database with
-lingering entries for non-existent logins?).
-Synchronous device open events can be used to perform intelligent
-device access protections. Before the device driver open() method is
-called, the daemon must first validate the open attempt, by running an
-external programme or script. This is far more flexible than access
-control lists, as access can be determined on the basis of other
-system conditions instead of just the UID and GID.
-Inode lookup events can be used to authenticate module autoload
-requests. Instead of using kmod directly, the event is sent to
-devfsd which can implement an arbitrary authentication before loading
-the module itself.
-Inode lookup events can also be used to construct arbitrary
-namespaces, without having to resort to populating devfs with symlinks
-to devices that don't exist.
-Speculative Device Scanning
-Consider an application (like cdparanoia) that wants to find all
-CD-ROM devices on the system (SCSI, IDE and other types), whether or
-not their respective modules are loaded. The application must
-speculatively open certain device nodes (such as /dev/sr0 for the SCSI
-CD-ROMs) in order to make sure the module is loaded. This requires
-that all Linux distributions follow the standard device naming scheme
-(last time I looked RedHat did things differently). Devfs solves the
-naming problem.
-The same application also wants to see which devices are actually
-available on the system. With the existing system it needs to read the
-/dev directory and speculatively open each /dev/sr* device to
-determine if the device exists or not. With a large /dev this is an
-inefficient operation, especially if there are many /dev/sr* nodes. A
-solution like scsidev could reduce the number of /dev/sr* entries (but
-of course that also requires all that inefficient directory scanning).
-With devfs, the application can open the /dev/sr directory
-(which triggers the module autoloading if required), and proceed to
-read /dev/sr. Since only the available devices will have
-entries, there are no inefficencies in directory scanning or device
-openings.
-----------------------------------------------------------------------------
-Who else does it?
-FreeBSD has a devfs implementation. Solaris and AIX each have a
-pseudo-devfs (something akin to scsidev but for all devices, with some
-unspecified kernel support). BeOS, Plan9 and QNX also have it. SGI's
-IRIX 6.4 and above also have a device filesystem.
-While we shouldn't just automatically do something because others do
-it, we should not ignore the work of others either. FreeBSD has a lot
-of competent people working on it, so their opinion should not be
-blithely ignored.
-----------------------------------------------------------------------------
-How it works
-Registering device entries
-For every entry (device node) in a devfs-based /dev a driver must call
-devfs_register(). This adds the name of the device entry, the
-file_operations structure pointer and a few other things to an
-internal table. Device entries may be added and removed at any
-time. When a device entry is registered, it automagically appears in
-any mounted devfs'.
-Inode lookup
-When a lookup operation on an entry is performed and if there is no
-driver information for that entry devfs will attempt to call
-devfsd. If still no driver information can be found then a negative
-dentry is yielded and the next stage operation will be called by the
-VFS (such as create() or mknod() inode methods). If driver information
-can be found, an inode is created (if one does not exist already) and
-all is well.
-Manually creating device nodes
-The mknod() method allows you to create an ordinary named pipe in the
-devfs, or you can create a character or block special inode if one
-does not already exist. You may wish to create a character or block
-special inode so that you can set permissions and ownership. Later, if
-a device driver registers an entry with the same name, the
-permissions, ownership and times are retained. This is how you can set
-the protections on a device even before the driver is loaded. Once you
-create an inode it appears in the directory listing.
-Unregistering device entries
-A device driver calls devfs_unregister() to unregister an entry.
-Chroot() gaols
-2.2.x kernels
-The semantics of inode creation are different when devfs is mounted
-with the "explicit" option. Now, when a device entry is registered, it
-will not appear until you use mknod() to create the device. It doesn't
-matter if you mknod() before or after the device is registered with
-devfs_register(). The purpose of this behaviour is to support
-chroot(2) gaols, where you want to mount a minimal devfs inside the
-gaol. Only the devices you specifically want to be available (through
-your mknod() setup) will be accessible.
-2.4.x kernels
-As of kernel 2.3.99, the VFS has had the ability to rebind parts of
-the global filesystem namespace into another part of the namespace.
-This now works even at the leaf-node level, which means that
-individual files and device nodes may be bound into other parts of the
-namespace. This is like making links, but better, because it works
-across filesystems (unlike hard links) and works through chroot()
-gaols (unlike symbolic links).
-Because of these improvements to the VFS, the multi-mount capability
-in devfs is no longer needed. The administrator may create a minimal
-device tree inside a chroot(2) gaol by using VFS bindings. As this
-provides most of the features of the devfs multi-mount capability, I
-removed the multi-mount support code (after issuing an RFC). This
-yielded code size reductions and simplifications.
-If you want to construct a minimal chroot() gaol, the following
-command should suffice:
-mount --bind /dev/null /gaol/dev/null
-Repeat for other device nodes you want to expose. Simple!
-----------------------------------------------------------------------------
-Operational issues
-Instructions for the impatient
-Nobody likes reading documentation. People just want to get in there
-and play. So this section tells you quickly the steps you need to take
-to run with devfs mounted over /dev. Skip these steps and you will end
-up with a nearly unbootable system. Subsequent sections describe the
-issues in more detail, and discuss non-essential configuration
-options.
-Devfsd
-OK, if you're reading this, I assume you want to play with
-devfs. First you should ensure that /usr/src/linux contains a
-recent kernel source tree. Then you need to compile devfsd, the device
-management daemon, available at
-http://www.atnf.csiro.au/~rgooch/linux/.
-Because the kernel has a naming scheme
-which is quite different from the old naming scheme, you need to
-install devfsd so that software and configuration files that use the
-old naming scheme will not break.
-Compile and install devfsd. You will be provided with a default
-configuration file /etc/devfsd.conf which will provide
-compatibility symlinks for the old naming scheme. Don't change this
-config file unless you know what you're doing. Even if you think you
-do know what you're doing, don't change it until you've followed all
-the steps below and booted a devfs-enabled system and verified that it
-works.
-Now edit your main system boot script so that devfsd is started at the
-very beginning (before any filesystem
-checks). /etc/rc.d/rc.sysinit is often the main boot script
-on systems with SysV-style boot scripts. On systems with BSD-style
-boot scripts it is often /etc/rc. Also check
-/sbin/rc.
-NOTE that the line you put into the boot
-script should be exactly:
-/sbin/devfsd /dev
-DO NOT use some special daemon-launching
-programme, otherwise the boot script may not wait for devfsd to finish
-initialising.
-System Libraries
-There may still be some problems because of broken software making
-assumptions about device names. In particular, some software does not
-handle devices which are symbolic links. If you are running a libc 5
-based system, install libc 5.4.44 (if you have libc 5.4.46, go back to
-libc 5.4.44, which is actually correct). If you are running a glibc
-based system, make sure you have glibc 2.1.3 or later.
-/etc/securetty
-PAM (Pluggable Authentication Modules) is supposed to be a flexible
-mechanism for providing better user authentication and access to
-services. Unfortunately, it's also fragile, complex and undocumented
-(check out RedHat 6.1, and probably other distributions as well). PAM
-has problems with symbolic links. Append the following lines to your
-/etc/securetty file:
-vc/1
-vc/2
-vc/3
-vc/4
-vc/5
-vc/6
-vc/7
-vc/8
-This will not weaken security. If you have a version of util-linux
-earlier than 2.10.h, please upgrade to 2.10.h or later. If you
-absolutely cannot upgrade, then also append the following lines to
-your /etc/securetty file:
-1
-2
-3
-4
-5
-6
-7
-8
-This may potentially weaken security by allowing root logins over the
-network (a password is still required, though). However, since there
-are problems with dealing with symlinks, I'm suspicious of the level
-of security offered in any case.
-XFree86
-While not essential, it's probably a good idea to upgrade to XFree86
-4.0, as patches went in to make it more devfs-friendly. If you don't,
-you'll probably need to apply the following patch to
-/etc/security/console.perms so that ordinary users can run
-startx. Note that not all distributions have this file (e.g. Debian),
-so if it's not present, don't worry about it.
--- /etc/security/console.perms.orig    Sat Apr 17 16:26:47 1999 
-+++ /etc/security/console.perms Fri Feb 25 23:53:55 2000 
-@@ -14,7 +14,7 @@ 
- # man 5 console.perms 
- # file classes -- these are regular expressions 
-<console>=tty[0-9][0-9]* :[0-9]\.[0-9] :[0-9] 
-+<console>=tty[0-9][0-9]* vc/[0-9][0-9]* :[0-9]\.[0-9] :[0-9] 
- # device classes -- these are shell-style globs 
- <floppy>=/dev/fd[0-1]* 
-If the patch does not apply, then change the line:
-<console>=tty[0-9][0-9]* :[0-9]\.[0-9] :[0-9]
-with:
-<console>=tty[0-9][0-9]* vc/[0-9][0-9]* :[0-9]\.[0-9] :[0-9]
-Disable devpts
-I've had a report of devpts mounted on /dev/pts not working
-correctly. Since devfs will also manage /dev/pts, there is no
-need to mount devpts as well. You should either edit your
-/etc/fstab so devpts is not mounted, or disable devpts from
-your kernel configuration.
-Unsupported drivers
-Not all drivers have devfs support. If you depend on one of these
-drivers, you will need to create a script or tarfile that you can use
-at boot time to create device nodes as appropriate. There is a
-section which describes this. Another
-section lists the drivers which have
-devfs support.
-/dev/mouse
-Many disributions configure /dev/mouse to be the mouse device
-for XFree86 and GPM. I actually think this is a bad idea, because it
-adds another level of indirection. When looking at a config file, if
-you see /dev/mouse you're left wondering which mouse
-is being referred to. Hence I recommend putting the actual mouse
-device (for example /dev/psaux) into your
-/etc/X11/XF86Config file (and similarly for the GPM
-configuration file).
-Alternatively, use the same technique used for unsupported drivers
-described above.
-The Kernel
-Finally, you need to make sure devfs is compiled into your kernel. Set
-CONFIG_EXPERIMENTAL=y, CONFIG_DEVFS_FS=y and CONFIG_DEVFS_MOUNT=y by
-using favourite configuration tool (i.e. make config or
-make xconfig) and then make clean and then recompile your kernel and 
-modules. At boot, devfs will be mounted onto /dev.
-If you encounter problems booting (for example if you forgot a
-configuration step), you can pass devfs=nomount at the kernel
-boot command line. This will prevent the kernel from mounting devfs at
-boot time onto /dev.
-In general, a kernel built with CONFIG_DEVFS_FS=y but without mounting
-devfs onto /dev is completely safe, and requires no
-configuration changes. One exception to take note of is when
-LABEL= directives are used in /etc/fstab. In this
-case you will be unable to boot properly. This is because the
-mount(8) programme uses /proc/partitions as part of
-the volume label search process, and the device names it finds are not
-available, because setting CONFIG_DEVFS_FS=y changes the names in
-/proc/partitions, irrespective of whether devfs is mounted.
-Now you've finished all the steps required. You're now ready to boot
-your shiny new kernel. Enjoy.
-Changing the configuration
-OK, you've now booted a devfs-enabled system, and everything works.
-Now you may feel like changing the configuration (common targets are
-/etc/fstab and /etc/devfsd.conf). Since you have a
-system that works, if you make any changes and it doesn't work, you
-now know that you only have to restore your configuration files to the
-default and it will work again.
-Permissions persistence across reboots
-If you don't use mknod(2) to create a device file, nor use chmod(2) or
-chown(2) to change the ownerships/permissions, the inode ctime will
-remain at 0 (the epoch, 12 am, 1-JAN-1970, GMT). Anything with a ctime
-later than this has had it's ownership/permissions changed. Hence, a
-simple script or programme may be used to tar up all changed inodes,
-prior to shutdown. Although effective, many consider this approach a
-kludge.
-A much better approach is to use devfsd to save and restore
-permissions. It may be configured to record changes in permissions and
-will save them in a database (in fact a directory tree), and restore
-these upon boot. This is an efficient method and results in immediate
-saving of current permissions (unlike the tar approach, which saves
-permissions at some unspecified future time).
-The default configuration file supplied with devfsd has config entries
-which you may uncomment to enable persistence management.
-If you decide to use the tar approach anyway, be aware that tar will
-first unlink(2) an inode before creating a new device node. The
-unlink(2) has the effect of breaking the connection between a devfs
-entry and the device driver. If you use the "devfs=only" boot option,
-you lose access to the device driver, requiring you to reload the
-module. I consider this a bug in tar (there is no real need to
-unlink(2) the inode first).
-Alternatively, you can use devfsd to provide more sophisticated
-management of device permissions. You can use devfsd to store
-permissions for whole groups of devices with a single configuration
-entry, rather than the conventional single entry per device entry.
-Permissions database stored in mounted-over /dev
-If you wish to save and restore your device permissions into the
-disc-based /dev while still mounting devfs onto /dev
-you may do so. This requires a 2.4.x kernel (in fact, 2.3.99 or
-later), which has the VFS binding facility. You need to do the
-following to set this up:
-make sure the kernel does not mount devfs at boot time
-make sure you have a correct /dev/console entry in your
-root file-system (where your disc-based /dev lives)
-create the /dev-state directory
-add the following lines near the very beginning of your boot
-scripts:
-mount --bind /dev /dev-state
-mount -t devfs none /dev
-devfsd /dev
-add the following lines to your /etc/devfsd.conf file:
-REGISTER        ^pt[sy]         IGNORE
-CREATE          ^pt[sy]         IGNORE
-CHANGE          ^pt[sy]         IGNORE
-DELETE          ^pt[sy]         IGNORE
-REGISTER        .*              COPY    /dev-state/$devname $devpath
-CREATE          .*              COPY    $devpath /dev-state/$devname
-CHANGE          .*              COPY    $devpath /dev-state/$devname
-DELETE          .*              CFUNCTION GLOBAL unlink /dev-state/$devname
-RESTORE         /dev-state
-Note that the sample devfsd.conf file contains these lines,
-as well as other sample configurations you may find useful. See the
-devfsd distribution
-reboot.
-Permissions database stored in normal directory
-If you are using an older kernel which doesn't support VFS binding,
-then you won't be able to have the permissions database in a
-mounted-over /dev. However, you can still use a regular
-directory to store the database. The sample /etc/devfsd.conf
-file above may still be used. You will need to create the
-/dev-state directory prior to installing devfsd. If you have
-old permissions in /dev, then just copy (or move) the device
-nodes over to the new directory.
-Which method is better?
-The best method is to have the permissions database stored in the
-mounted-over /dev. This is because you will not need to copy
-device nodes over to /dev-state, and because it allows you to
-switch between devfs and non-devfs kernels, without requiring you to
-copy permissions between /dev-state (for devfs) and
-/dev (for non-devfs).
-Dealing with drivers without devfs support
-Currently, not all device drivers in the kernel have been modified to
-use devfs. Device drivers which do not yet have devfs support will not
-automagically appear in devfs. The simplest way to create device nodes
-for these drivers is to unpack a tarfile containing the required
-device nodes. You can do this in your boot scripts. All your drivers
-will now work as before.
-Hopefully for most people devfs will have enough support so that they
-can mount devfs directly over /dev without losing most functionality
-(i.e. losing access to various devices). As of 22-JAN-1998 (devfs
-patch version 10) I am now running this way. All the devices I have
-are available in devfs, so I don't lose anything.
-WARNING: if your configuration requires the old-style device names
-(i.e. /dev/hda1 or /dev/sda1), you must install devfsd and configure
-it to maintain compatibility entries. It is almost certain that you
-will require this. Note that the kernel creates a compatibility entry
-for the root device, so you don't need initrd.
-Note that you no longer need to mount devpts if you use Unix98 PTYs,
-as devfs can manage /dev/pts itself. This saves you some RAM, as you
-don't need to compile and install devpts. Note that some versions of
-glibc have a bug with Unix98 pty handling on devfs systems. Contact
-the glibc maintainers for a fix. Glibc 2.1.3 has the fix.
-Note also that apart from editing /etc/fstab, other things will need
-to be changed if you *don't* install devfsd. Some software (like the X
-server) hard-wire device names in their source. It really is much
-easier to install devfsd so that compatibility entries are created.
-You can then slowly migrate your system to using the new device names
-(for example, by starting with /etc/fstab), and then limiting the
-compatibility entries that devfsd creates.
-IF YOU CONFIGURE TO MOUNT DEVFS AT BOOT, MAKE SURE YOU INSTALL DEVFSD
-BEFORE YOU BOOT A DEVFS-ENABLED KERNEL!
-Now that devfs has gone into the 2.3.46 kernel, I'm getting a lot of
-reports back. Many of these are because people are trying to run
-without devfsd, and hence some things break. Please just run devfsd if
-things break. I want to concentrate on real bugs rather than
-misconfiguration problems at the moment. If people are willing to fix
-bugs/false assumptions in other code (i.e. glibc, X server) and submit
-that to the respective maintainers, that would be great.
-All the way with Devfs
-The devfs kernel patch creates a rationalised device tree. As stated
-above, if you want to keep using the old /dev naming scheme,
-you just need to configure devfsd appopriately (see the man
-page). People who prefer the old names can ignore this section. For
-those of us who like the rationalised names and an uncluttered
-/dev, read on.
-If you don't run devfsd, or don't enable compatibility entry
-management, then you will have to configure your system to use the new
-names. For example, you will then need to edit your
-/etc/fstab to use the new disc naming scheme. If you want to
-be able to boot non-devfs kernels, you will need compatibility
-symlinks in the underlying disc-based /dev pointing back to
-the old-style names for when you boot a kernel without devfs.
-You can selectively decide which devices you want compatibility
-entries for. For example, you may only want compatibility entries for
-BSD pseudo-terminal devices (otherwise you'll have to patch you C
-library or use Unix98 ptys instead). It's just a matter of putting in
-the correct regular expression into /dev/devfsd.conf.
-There are other choices of naming schemes that you may prefer. For
-example, I don't use the kernel-supplied
-names, because they are too verbose. A common misconception is
-that the kernel-supplied names are meant to be used directly in
-configuration files. This is not the case. They are designed to
-reflect the layout of the devices attached and to provide easy
-classification.
-If you like the kernel-supplied names, that's fine. If you don't then
-you should be using devfsd to construct a namespace more to your
-liking. Devfsd has built-in code to construct a
-namespace that is both logical and easy to
-manage. In essence, it creates a convenient abbreviation of the
-kernel-supplied namespace.
-You are of course free to build your own namespace. Devfsd has all the
-infrastructure required to make this easy for you. All you need do is
-write a script. You can even write some C code and devfsd can load the
-shared object as a callable extension.
-Other Issues
-The init programme
-Another thing to take note of is whether your init programme
-creates a Unix socket /dev/telinit. Some versions of init
-create /dev/telinit so that the telinit programme can
-communicate with the init process. If you have such a system you need
-to make sure that devfs is mounted over /dev *before* init
-starts. In other words, you can't leave the mounting of devfs to
-/etc/rc, since this is executed after init. Other
-versions of init require a named pipe /dev/initctl
-which must exist *before* init starts. Once again, you need to
-mount devfs and then create the named pipe *before* init
-starts.
-The default behaviour now is not to mount devfs onto /dev at
-boot time for 2.3.x and later kernels. You can correct this with the
-"devfs=mount" boot option. This solves any problems with init,
-and also prevents the dreaded:
-Cannot open initial console
-message. For 2.2.x kernels where you need to apply the devfs patch,
-the default is to mount.
-If you have automatic mounting of devfs onto /dev then you
-may need to create /dev/initctl in your boot scripts. The
-following lines should suffice:
-mknod /dev/initctl p
-kill -SIGUSR1 1       # tell init that /dev/initctl now exists
-Alternatively, if you don't want the kernel to mount devfs onto
-/dev then you could use the following procedure is a
-guideline for how to get around /dev/initctl problems:
-# cd /sbin
-# mv init init.real
-# cat > init
-#! /bin/sh
-mount -n -t devfs none /dev
-mknod /dev/initctl p
-exec /sbin/init.real $*
-[control-D]
-# chmod a+x init
-Note that newer versions of init create /dev/initctl
-automatically, so you don't have to worry about this.
-Module autoloading
-You will need to configure devfsd to enable module
-autoloading. The following lines should be placed in your
-/etc/devfsd.conf file:
-LOOKUP  .*              MODLOAD
-As of devfsd-v1.3.10, a generic /etc/modules.devfs
-configuration file is installed, which is used by the MODLOAD
-action. This should be sufficient for most configurations. If you
-require further configuration, edit your /etc/modules.conf
-file. The way module autoloading work with devfs is:
-a process attempts to lookup a device node (e.g. /dev/fred)
-if that device node does not exist, the full pathname is passed to
-devfsd as a string
-devfsd will pass the string to the modprobe programme (provided the
-configuration line shown above is present), and specifies that
-/etc/modules.devfs is the configuration file
-/etc/modules.devfs includes /etc/modules.conf to
-access local configurations
-modprobe will search it's configuration files, looking for an alias
-that translates the pathname into a module name
-the translated pathname is then used to load the module.
-If you wanted a lookup of /dev/fred to load the
-mymod module, you would require the following configuration
-line in /etc/modules.conf:
-alias    /dev/fred    mymod
-The /etc/modules.devfs configuration file provides many such
-aliases for standard device names. If you look closely at this file,
-you will note that some modules require multiple alias configuration
-lines. This is required to support module autoloading for old and new
-device names.
-Mounting root off a devfs device
-If you wish to mount root off a devfs device when you pass the
-"devfs=only" boot option, then you need to pass in the
-"root=<device>" option to the kernel when booting. If you use
-LILO, then you must have this in lilo.conf:
-append = "root=<device>"
-Surprised? Yep, so was I. It turns out if you have (as most people
-do):
-root = <device>
-then LILO will determine the device number of <device> and will
-write that device number into a special place in the kernel image
-before starting the kernel, and the kernel will use that device number
-to mount the root filesystem. So, using the "append" variety ensures
-that LILO passes the root filesystem device as a string, which devfs
-can then use.
-Note that this isn't an issue if you don't pass "devfs=only".
-TTY issues
-The ttyname(3) function in some versions of the C library makes
-false assumptions about device entries which are symbolic links.  The
-tty(1) programme is one that depends on this function.  I've
-written a patch to libc 5.4.43 which fixes this. This has been
-included in libc 5.4.44 and a similar fix is in glibc 2.1.3.
-Kernel Naming Scheme
-The kernel provides a default naming scheme. This scheme is designed
-to make it easy to search for specific devices or device types, and to
-view the available devices. Some device types (such as hard discs),
-have a directory of entries, making it easy to see what devices of
-that class are available. Often, the entries are symbolic links into a
-directory tree that reflects the topology of available devices. The
-topological tree is useful for finding how your devices are arranged.
-Below is a list of the naming schemes for the most common drivers. A
-list of reserved device names is
-available for reference. Please send email to
-rgooch@atnf.csiro.au to obtain an allocation. Please be
-patient (the maintainer is busy). An alternative name may be allocated
-instead of the requested name, at the discretion of the maintainer.
-Disc Devices
-All discs, whether SCSI, IDE or whatever, are placed under the
-/dev/discs hierarchy:
-        /dev/discs/disc0        first disc
-        /dev/discs/disc1        second disc
-Each of these entries is a symbolic link to the directory for that
-device. The device directory contains:
-        disc    for the whole disc
-        part*   for individual partitions
-CD-ROM Devices
-All CD-ROMs, whether SCSI, IDE or whatever, are placed under the
-/dev/cdroms hierarchy:
-        /dev/cdroms/cdrom0      first CD-ROM
-        /dev/cdroms/cdrom1      second CD-ROM
-Each of these entries is a symbolic link to the real device entry for
-that device.
-Tape Devices
-All tapes, whether SCSI, IDE or whatever, are placed under the
-/dev/tapes hierarchy:
-        /dev/tapes/tape0        first tape
-        /dev/tapes/tape1        second tape
-Each of these entries is a symbolic link to the directory for that
-device. The device directory contains:
-        mt                      for mode 0
-        mtl                     for mode 1
-        mtm                     for mode 2
-        mta                     for mode 3
-        mtn                     for mode 0, no rewind
-        mtln                    for mode 1, no rewind
-        mtmn                    for mode 2, no rewind
-        mtan                    for mode 3, no rewind
-SCSI Devices
-To uniquely identify any SCSI device requires the following
-information:
-  controller    (host adapter)
-  bus           (SCSI channel)
-  target        (SCSI ID)
-  unit          (Logical Unit Number)
-All SCSI devices are placed under /dev/scsi (assuming devfs
-is mounted on /dev). Hence, a SCSI device with the following
-parameters: c=1,b=2,t=3,u=4 would appear as:
-        /dev/scsi/host1/bus2/target3/lun4       device directory
-Inside this directory, a number of device entries may be created,
-depending on which SCSI device-type drivers were installed.
-See the section on the disc naming scheme to see what entries the SCSI
-disc driver creates.
-See the section on the tape naming scheme to see what entries the SCSI
-tape driver creates.
-The SCSI CD-ROM driver creates:
-        cd
-The SCSI generic driver creates:
-        generic
-IDE Devices
-To uniquely identify any IDE device requires the following
-information:
-  controller
-  bus           (aka. primary/secondary)
-  target        (aka. master/slave)
-  unit
-All IDE devices are placed under /dev/ide, and uses a similar
-naming scheme to the SCSI subsystem.
-XT Hard Discs
-All XT discs are placed under /dev/xd. The first XT disc has
-the directory /dev/xd/disc0.
-TTY devices
-The tty devices now appear as:
-  New name                   Old-name                   Device Type
-  --------                   --------                   -----------
-  /dev/tts/{0,1,...}         /dev/ttyS{0,1,...}         Serial ports
-  /dev/cua/{0,1,...}         /dev/cua{0,1,...}          Call out devices
-  /dev/vc/0                  /dev/tty                   Current virtual console
-  /dev/vc/{1,2,...}          /dev/tty{1...63}           Virtual consoles
-  /dev/vcc/{0,1,...}         /dev/vcs{1...63}           Virtual consoles
-  /dev/pty/m{0,1,...}        /dev/ptyp??                PTY masters
-  /dev/pty/s{0,1,...}        /dev/ttyp??                PTY slaves
-RAMDISCS
-The RAMDISCS are placed in their own directory, and are named thus:
-  /dev/rd/{0,1,2,...}
-Meta Devices
-The meta devices are placed in their own directory, and are named
-thus:
-  /dev/md/{0,1,2,...}
-Floppy discs
-Floppy discs are placed in the /dev/floppy directory.
-Loop devices
-Loop devices are placed in the /dev/loop directory.
-Sound devices
-Sound devices are placed in the /dev/sound directory
-(audio, sequencer, ...).
-Devfsd Naming Scheme
-Devfsd provides a naming scheme which is a convenient abbreviation of
-the kernel-supplied namespace. In some
-cases, the kernel-supplied naming scheme is quite convenient, so
-devfsd does not provide another naming scheme. The convenience names
-that devfsd creates are in fact the same names as the original devfs
-kernel patch created (before Linus mandated the Big Name
-Change). These are referred to as "new compatibility entries".
-In order to configure devfsd to create these convenience names, the
-following lines should be placed in your /etc/devfsd.conf:
-REGISTER        .*              MKNEWCOMPAT
-UNREGISTER      .*              RMNEWCOMPAT
-This will cause devfsd to create (and destroy) symbolic links which
-point to the kernel-supplied names.
-SCSI Hard Discs
-All SCSI discs are placed under /dev/sd (assuming devfs is
-mounted on /dev). Hence, a SCSI disc with the following
-parameters: c=1,b=2,t=3,u=4 would appear as:
-        /dev/sd/c1b2t3u4        for the whole disc
-        /dev/sd/c1b2t3u4p5      for the 5th partition
-        /dev/sd/c1b2t3u4p5s6    for the 6th slice in the 5th partition
-SCSI Tapes
-All SCSI tapes are placed under /dev/st. A similar naming
-scheme is used as for SCSI discs. A SCSI tape with the
-parameters:c=1,b=2,t=3,u=4 would appear as:
-        /dev/st/c1b2t3u4m0      for mode 0
-        /dev/st/c1b2t3u4m1      for mode 1
-        /dev/st/c1b2t3u4m2      for mode 2
-        /dev/st/c1b2t3u4m3      for mode 3
-        /dev/st/c1b2t3u4m0n     for mode 0, no rewind
-        /dev/st/c1b2t3u4m1n     for mode 1, no rewind
-        /dev/st/c1b2t3u4m2n     for mode 2, no rewind
-        /dev/st/c1b2t3u4m3n     for mode 3, no rewind
-SCSI CD-ROMs
-All SCSI CD-ROMs are placed under /dev/sr. A similar naming
-scheme is used as for SCSI discs. A SCSI CD-ROM with the
-parameters:c=1,b=2,t=3,u=4 would appear as:
-        /dev/sr/c1b2t3u4
-SCSI Generic Devices
-The generic (aka. raw) interface for all SCSI devices are placed under
-/dev/sg. A similar naming scheme is used as for SCSI discs. A
-SCSI generic device with the parameters:c=1,b=2,t=3,u=4 would appear
-as:
-        /dev/sg/c1b2t3u4
-IDE Hard Discs
-All IDE discs are placed under /dev/ide/hd, using a similar
-convention to SCSI discs. The following mappings exist between the new
-and the old names:
-        /dev/hda        /dev/ide/hd/c0b0t0u0
-        /dev/hdb        /dev/ide/hd/c0b0t1u0
-        /dev/hdc        /dev/ide/hd/c0b1t0u0
-        /dev/hdd        /dev/ide/hd/c0b1t1u0
-IDE Tapes
-A similar naming scheme is used as for IDE discs. The entries will
-appear in the /dev/ide/mt directory.
-IDE CD-ROM
-A similar naming scheme is used as for IDE discs. The entries will
-appear in the /dev/ide/cd directory.
-IDE Floppies
-A similar naming scheme is used as for IDE discs. The entries will
-appear in the /dev/ide/fd directory.
-XT Hard Discs
-All XT discs are placed under /dev/xd. The first XT disc
-would appear as /dev/xd/c0t0.
-Old Compatibility Names
-The old compatibility names are the legacy device names, such as
-/dev/hda, /dev/sda, /dev/rtc and so on.
-Devfsd can be configured to create compatibility symlinks so that you
-may continue to use the old names in your configuration files and so
-that old applications will continue to function correctly.
-In order to configure devfsd to create these legacy names, the
-following lines should be placed in your /etc/devfsd.conf:
-REGISTER        .*              MKOLDCOMPAT
-UNREGISTER      .*              RMOLDCOMPAT
-This will cause devfsd to create (and destroy) symbolic links which
-point to the kernel-supplied names.
-----------------------------------------------------------------------------
-Device drivers currently ported
- All miscellaneous character devices support devfs (this is done
-  transparently through misc_register())
- SCSI discs and generic hard discs
- Character memory devices (null, zero, full and so on)
-  Thanks to C. Scott Ananian <cananian@alumni.princeton.edu>
- Loop devices (/dev/loop?)
- 
- TTY devices (console, serial ports, terminals and pseudo-terminals)
-  Thanks to C. Scott Ananian <cananian@alumni.princeton.edu>
- SCSI tapes (/dev/scsi and /dev/tapes)
- SCSI CD-ROMs (/dev/scsi and /dev/cdroms)
- SCSI generic devices (/dev/scsi)
- RAMDISCS (/dev/ram?)
- Meta Devices (/dev/md*)
- Floppy discs (/dev/floppy)
- Parallel port printers (/dev/printers)
- Sound devices (/dev/sound)
-  Thanks to Eric Dumas <dumas@linux.eu.org> and
-  C. Scott Ananian <cananian@alumni.princeton.edu>
- Joysticks (/dev/joysticks)
- Sparc keyboard (/dev/kbd)
- DSP56001 digital signal processor (/dev/dsp56k)
- Apple Desktop Bus (/dev/adb)
- Coda network file system (/dev/cfs*)
- Virtual console capture devices (/dev/vcc)
-  Thanks to Dennis Hou <smilax@mindmeld.yi.org>
- Frame buffer devices (/dev/fb)
- Video capture devices (/dev/v4l)
-----------------------------------------------------------------------------
-Allocation of Device Numbers
-Devfs allows you to write a driver which doesn't need to allocate a
-device number (major&minor numbers) for the internal operation of the
-kernel. However, there are a number of userspace programmes that use
-the device number as a unique handle for a device. An example is the
-find programme, which uses device numbers to determine whether
-an inode is on a different filesystem than another inode. The device
-number used is the one for the block device which a filesystem is
-using. To preserve compatibility with userspace programmes, block
-devices using devfs need to have unique device numbers allocated to
-them. Furthermore, POSIX specifies device numbers, so some kind of
-device number needs to be presented to userspace.
-The simplest option (especially when porting drivers to devfs) is to
-keep using the old major and minor numbers. Devfs will take whatever
-values are given for major&minor and pass them onto userspace.
-This device number is a 16 bit number, so this leaves plenty of space
-for large numbers of discs and partitions. This scheme can also be
-used for character devices, in particular the tty devices, which are
-currently limited to 256 pseudo-ttys (this limits the total number of
-simultaneous xterms and remote logins).  Note that the device number
-is limited to the range 36864-61439 (majors 144-239), in order to
-avoid any possible conflicts with existing official allocations.
-Please note that using dynamically allocated block device numbers may
-break the NFS daemons (both user and kernel mode), which expect dev_t
-for a given device to be constant over the lifetime of remote mounts.
-A final note on this scheme: since it doesn't increase the size of
-device numbers, there are no compatibility issues with userspace.
-----------------------------------------------------------------------------
-Questions and Answers
-Making things work
-Alternatives to devfs
-What I don't like about devfs
-How to report bugs
-Strange kernel messages
-Compilation problems with devfsd
-Making things work
-Here are some common questions and answers.
-Devfsd doesn't start
-Make sure you have compiled and installed devfsd
-Make sure devfsd is being started from your boot
-scripts
-Make sure you have configured your kernel to enable devfs (see
-below)
-Make sure devfs is mounted (see below)
-Devfsd is not managing all my permissions
-Make sure you are capturing the appropriate events. For example,
-device entries created by the kernel generate REGISTER events,
-but those created by devfsd generate CREATE events.
-Devfsd is not capturing all REGISTER events
-See the previous entry: you may need to capture CREATE events.
-X will not start
-Make sure you followed the steps 
-outlined above.
-Why don't my network devices appear in devfs?
-This is not a bug. Network devices have their own, completely separate
-namespace. They are accessed via socket(2) and
-setsockopt(2) calls, and thus require no device nodes. I have
-raised the possibilty of moving network devices into the device
-namespace, but have had no response.
-How can I test if I have devfs compiled into my kernel?
-All filesystems built-in or currently loaded are listed in
-/proc/filesystems. If you see a devfs entry, then
-you know that devfs was compiled into your kernel. If you have
-correctly configured and rebuilt your kernel, then devfs will be
-built-in. If you think you've configured it in, but
-/proc/filesystems doesn't show it, you've made a mistake.
-Common mistakes include:
-Using a 2.2.x kernel without applying the devfs patch (if you
-don't know how to patch your kernel, use 2.4.x instead, don't bother
-asking me how to patch)
-Forgetting to set CONFIG_EXPERIMENTAL=y
-Forgetting to set CONFIG_DEVFS_FS=y
-Forgetting to set CONFIG_DEVFS_MOUNT=y (if you want devfs
-to be automatically mounted at boot)
-Editing your .config manually, instead of using make
-config or make xconfig
-Forgetting to run make dep; make clean after changing the
-configuration and before compiling
-Forgetting to compile your kernel and modules
-Forgetting to install your kernel
-Forgetting to install your modules
-Please check twice that you've done all these steps before sending in
-a bug report.
-How can I test if devfs is mounted on /dev?
-The device filesystem will always create an entry called
-".devfsd", which is used to communicate with the daemon. Even
-if the daemon is not running, this entry will exist. Testing for the
-existence of this entry is the approved method of determining if devfs
-is mounted or not. Note that the type of entry (i.e. regular file,
-character device, named pipe, etc.) may change without notice. Only
-the existence of the entry should be relied upon.
-When I start devfsd, I see the error:
-Error opening file: ".devfsd"   No such file or directory?
-This means that devfs is not mounted. Make sure you have devfs mounted.
-How do I mount devfs?
-First make sure you have devfs compiled into your kernel (see
-above). Then you will either need to:
-set CONFIG_DEVFS_MOUNT=y in your kernel config
-pass devfs=mount to your boot loader
-mount devfs manually in your boot scripts with:
-mount -t none devfs /dev
-Mount by volume LABEL=<label> doesn't work with
-devfs
-Most probably you are not mounting devfs onto /dev. What
-happens is that if your kernel config has CONFIG_DEVFS_FS=y
-then the contents of /proc/partitions will have the devfs
-names (such as scsi/host0/bus0/target0/lun0/part1). The
-contents of /proc/partitions are used by mount(8) when
-mounting by volume label. If devfs is not mounted on /dev,
-then mount(8) will fail to find devices. The solution is to
-make sure that devfs is mounted on /dev. See above for how to
-do that.
-I have extra or incorrect entries in /dev
-You may have stale entries in your dev-state area. Check for a
-RESTORE configuration line in your devfsd configuration
-(typically /etc/devfsd.conf). If you have this line, check
-the contents of the specified directory for stale entries. Remove
-any entries which are incorrect, then reboot.
-I get "Unable to open initial console" messages at boot
-This usually happens when you don't have devfs automounted onto
-/dev at boot time, and there is no valid
-/dev/console entry on your root file-system. Create a valid
-/dev/console device node.
-Alternatives to devfs
-I've attempted to collate all the anti-devfs proposals and explain
-their limitations. Under construction.
-Why not just pass device create/remove events to a daemon?
-Here the suggestion is to develop an API in the kernel so that devices
-can register create and remove events, and a daemon listens for those
-events. The daemon would then populate/depopulate /dev (which
-resides on disc).
-This has several limitations:
-it only works for modules loaded and unloaded (or devices inserted
-and removed) after the kernel has finished booting. Without a database
-of events, there is no way the daemon could fully populate
-/dev
-if you add a database to this scheme, the question is then how to
-present that database to user-space. If you make it a list of strings
-with embedded event codes which are passed through a pipe to the
-daemon, then this is only of use to the daemon. I would argue that the
-natural way to present this data is via a filesystem (since many of
-the events will be of a hierarchical nature), such as devfs.
-Presenting the data as a filesystem makes it easy for the user to see
-what is available and also makes it easy to write scripts to scan the
-"database"
-the tight binding between device nodes and drivers is no longer
-possible (requiring the otherwise perfectly avoidable
-table lookups)
-you cannot catch inode lookup events on /dev which means
-that module autoloading requires device nodes to be created. This is a
-problem, particularly for drivers where only a few inodes are created
-from a potentially large set
-this technique can't be used when the root FS is mounted
-read-only
-Just implement a better scsidev
-This suggestion involves taking the scsidev programme and
-extending it to scan for all devices, not just SCSI devices. The
-scsidev programme works by scanning /proc/scsi
-Problems:
-the kernel does not currently provide a list of all devices
-available. Not all drivers register entries in /proc or
-generate kernel messages
-there is no uniform mechanism to register devices other than the
-devfs API
-implementing such an API is then the same as the
-proposal above
-Put /dev on a ramdisc
-This suggestion involves creating a ramdisc and populating it with
-device nodes and then mounting it over /dev.
-Problems:
-this doesn't help when mounting the root filesystem, since you
-still need a device node to do that
-if you want to use this technique for the root device node as
-well, you need to use initrd. This complicates the booting sequence
-and makes it significantly harder to administer and configure. The
-initrd is essentially opaque, robbing the system administrator of easy
-configuration
-insufficient information is available to correctly populate the
-ramdisc. So we come back to the
-proposal above to "solve" this
-a ramdisc-based solution would take more kernel memory, since the
-backing store would be (at best) normal VFS inodes and dentries, which
-take 284 bytes and 112 bytes, respectively, for each entry. Compare
-that to 72 bytes for devfs
-Do nothing: there's no problem
-Sometimes people can be heard to claim that the existing scheme is
-fine. This is what they're ignoring:
-device number size (8 bits each for major and minor) is a real
-limitation, and must be fixed somehow. Systems with large numbers of
-SCSI devices, for example, will continue to consume the remaining
-unallocated major numbers. USB will also need to push beyond the 8 bit
-minor limitation
-simply increasing the device number size is insufficient. Apart
-from causing a lot of pain, it doesn't solve the management issues
-of a /dev with thousands or more device nodes
-ignoring the problem of a huge /dev will not make it go
-away, and dismisses the legitimacy of a large number of people who
-want a dynamic /dev
-the standard response then becomes: "write a device management
-daemon", which brings us back to the
-proposal above
-What I don't like about devfs
-Here are some common complaints about devfs, and some suggestions and
-solutions that may make it more palatable for you. I can't please
-everybody, but I do try :-)
-I hate the naming scheme
-First, remember that no naming scheme will please everybody. You hate
-the scheme, others love it. Who's to say who's right and who's wrong?
-Ultimately, the person who writes the code gets to choose, and what
-exists now is a combination of the choices made by the
-devfs author and the
-kernel maintainer (Linus).
-However, not all is lost. If you want to create your own naming
-scheme, it is a simple matter to write a standalone script, hack
-devfsd, or write a script called by devfsd. You can create whatever
-naming scheme you like.
-Further, if you want to remove all traces of the devfs naming scheme
-from /dev, you can mount devfs elsewhere (say
-/devfs) and populate /dev with links into
-/devfs. This population can be automated using devfsd if you
-wish.
-You can even use the VFS binding facility to make the links, rather
-than using symbolic links. This way, you don't even have to see the
-"destination" of these symbolic links.
-Devfs puts policy into the kernel
-There's already policy in the kernel. Device numbers are in fact
-policy (why should the kernel dictate what device numbers I use?).
-Face it, some policy has to be in the kernel. The real difference
-between device names as policy and device numbers as policy is that
-no one will use device numbers directly, because device
-numbers are devoid of meaning to humans and are ugly. At least with
-the devfs device names, (even though you can add your own naming
-scheme) some people will use the devfs-supplied names directly. This
-offends some people :-)
-Devfs is bloatware
-This is not even remotely true. As shown above,
-both code and data size are quite modest.
-How to report bugs
-If you have (or think you have) a bug with devfs, please follow the
-steps below:
-make sure you have enabled debugging output when configuring your
-kernel. You will need to set (at least) the following config options:
-CONFIG_DEVFS_DEBUG=y
-CONFIG_DEBUG_KERNEL=y
-CONFIG_DEBUG_SLAB=y
-please make sure you have the latest devfs patches applied. The
-latest kernel version might not have the latest devfs patches applied
-yet (Linus is very busy)
-save a copy of your complete kernel logs (preferably by
-using the dmesg programme) for later inclusion in your bug
-report. You may need to use the -s switch to increase the
-internal buffer size so you can capture all the boot messages.
-Don't edit or trim the dmesg output
-try booting with devfs=dall passed to the kernel boot
-command line (read the documentation on your bootloader on how to do
-this), and save the result to a file. This may be quite verbose, and
-it may overflow the messages buffer, but try to get as much of it as
-you can
-send a copy of your devfsd configuration file(s)
-send the bug report to me first.
-Don't expect that I will see it if you post it to the linux-kernel
-mailing list. Include all the information listed above, plus
-anything else that you think might be relevant. Put the string
-devfs somewhere in the subject line, so my mail filters mark
-it as urgent
-Here is a general guide on how to ask questions in a way that greatly
-improves your chances of getting a reply:
-http://www.tuxedo.org/~esr/faqs/smart-questions.html. If you have
-a bug to report, you should also read
-http://www.chiark.greenend.org.uk/~sgtatham/bugs.html.
-Strange kernel messages
-You may see devfs-related messages in your kernel logs. Below are some
-messages and what they mean (and what you should do about them, if
-anything).
-devfs_register(fred): could not append to parent, err: -17
-You need to check what the error code means, but usually 17 means
-EEXIST. This means that a driver attempted to create an entry
-fred in a directory, but there already was an entry with that
-name. This is often caused by flawed boot scripts which untar a bunch
-of inodes into /dev, as a way to restore permissions. This
-message is harmless, as the device nodes will still
-provide access to the driver (unless you use the devfs=only
-boot option, which is only for dedicated souls:-). If you want to get
-rid of these annoying messages, upgrade to devfsd-v1.3.20 and use the
-recommended RESTORE directive to restore permissions.
-devfs_mk_dir(bill): using old entry in dir: c1808724 ""
-This is similar to the message above, except that a driver attempted
-to create a directory named bill, and the parent directory
-has an entry with the same name. In this case, to ensure that drivers
-continue to work properly, the old entry is re-used and given to the
-driver. In 2.5 kernels, the driver is given a NULL entry, and thus,
-under rare circumstances, may not create the require device nodes.
-The solution is the same as above.
-Compilation problems with devfsd
-Usually, you can compile devfsd just by typing in
-make in the source directory, followed by a make
-install (as root). Sometimes, you may have problems, particularly
-on broken configurations.
-error messages relating to DEVFSD_NOTIFY_DELETE
-This happened because you have an ancient set of kernel headers
-installed in /usr/include/linux or /usr/src/linux.
-Install kernel 2.4.10 or later. You may need to pass the
-KERNEL_DIR variable to make (if you did not install
-the new kernel sources as /usr/src/linux), or you may copy
-the devfs_fs.h file in the kernel source tree into
-/usr/include/linux.
-----------------------------------------------------------------------------
-Other resources
-Douglas Gilbert has written a useful document at
-http://www.torque.net/sg/devfs_scsi.html which
-explores the SCSI subsystem and how it interacts with devfs
-Douglas Gilbert has written another useful document at
-http://www.torque.net/scsi/SCSI-2.4-HOWTO/ which
-discusses the Linux SCSI subsystem in 2.4.
-Johannes Erdfelt has started a discussion paper on Linux and
-hot-swap devices, describing what the requirements are for a scalable
-solution and how and why he's used devfs+devfsd. Note that this is an
-early draft only, available in plain text form at:
-http://johannes.erdfelt.com/hotswap.txt.
-Johannes has promised a HTML version will follow.
-I presented an invited 
-paper
-at the
-2nd Annual Storage Management Workshop held in Miamia, Florida,
-U.S.A. in October 2000.
-----------------------------------------------------------------------------
-Translations of this document
-This document has been translated into other languages.
-The document master (in English) by rgooch@atnf.csiro.au is
-available at
-http://www.atnf.csiro.au/~rgooch/linux/docs/devfs.html
-A Korean translation by viatoris@nownuri.net is available at
-http://your.destiny.pe.kr/devfs/devfs.html
-----------------------------------------------------------------------------
-Most flags courtesy of ITA's 
-Flags of All Countries
-used with permission. 
diff --git a/Documentation/filesystems/devfs/ToDo b/Documentation/filesystems/devfs/ToDo
deleted file mode 100644
index afd5a8f2c19b..000000000000
--- a/Documentation/filesystems/devfs/ToDo
+++ /dev/null
@@ -1,40 +0,0 @@
-                Device File System (devfs) ToDo List
-                Richard Gooch <rgooch@atnf.csiro.au>
-                              3-JUL-2000
-This is a list of things to be done for better devfs support in the
-Linux kernel. If you'd like to contribute to the devfs, please have a
-look at this list for anything that is unallocated. Also, if there are
-items missing (surely), please contact me so I can add them to the
-list (preferably with your name attached to them:-).
- >256 ptys
-  Thanks to C. Scott Ananian <cananian@alumni.princeton.edu>
- Amiga floppy driver (drivers/block/amiflop.c)
- Atari floppy driver (drivers/block/ataflop.c)
- SWIM3 (Super Woz Integrated Machine 3) floppy driver (drivers/block/swim3.c)
- Amiga ZorroII ramdisc driver (drivers/block/z2ram.c)
- Parallel port ATAPI CD-ROM (drivers/block/paride/pcd.c)
- Parallel port ATAPI floppy (drivers/block/paride/pf.c)
- AP1000 block driver (drivers/ap1000/ap.c, drivers/ap1000/ddv.c)
- Archimedes floppy (drivers/acorn/block/fd1772.c)
- MFM hard drive (drivers/acorn/block/mfmhd.c)
- I2O block device (drivers/message/i2o/i2o_block.c)
- ST-RAM device (arch/m68k/atari/stram.c)
- Raw devices
diff --git a/Documentation/filesystems/devfs/boot-options b/Documentation/filesystems/devfs/boot-options
deleted file mode 100644
index df3d33b03e0a..000000000000
--- a/Documentation/filesystems/devfs/boot-options
+++ /dev/null
@@ -1,65 +0,0 @@
-/* -*- auto-fill -*-                                                         */
-                Device File System (devfs) Boot Options
-                Richard Gooch <rgooch@atnf.csiro.au>
-                              18-AUG-2001
-When CONFIG_DEVFS_DEBUG is enabled, you can pass several boot options
-to the kernel to debug devfs. The boot options are prefixed by
-"devfs=", and are separated by commas. Spaces are not allowed. The
-syntax looks like this:
-devfs=<option1>,<option2>,<option3>
-and so on. For example, if you wanted to turn on debugging for module
-load requests and device registration, you would do:
-devfs=dmod,dreg
-You may prefix "no" to any option. This will invert the option.
-Debugging Options
-=================
-These requires CONFIG_DEVFS_DEBUG to be enabled.
-Note that all debugging options have 'd' as the first character. By
-default all options are off. All debugging output is sent to the
-kernel logs. The debugging options do not take effect until the devfs
-version message appears (just prior to the root filesystem being
-mounted).
-These are the options:
-dmod            print module load requests to <request_module>
-dreg            print device register requests to <devfs_register>
-dunreg          print device unregister requests to <devfs_unregister>
-dchange         print device change requests to <devfs_set_flags>
-dilookup        print inode lookup requests
-diget           print VFS inode allocations
-diunlink        print inode unlinks
-dichange        print inode changes
-dimknod         print calls to mknod(2)
-dall            some debugging turned on
-Other Options
-=============
-These control the default behaviour of devfs. The options are:
-mount           mount devfs onto /dev at boot time
-only            disable non-devfs device nodes for devfs-capable drivers
diff --git a/Documentation/initrd.txt b/Documentation/initrd.txt
index 7de1c80cd719..b1b6440237a6 100644
--- a/Documentation/initrd.txt
+++ b/Documentation/initrd.txt
@@ -67,8 +67,7 @@ initrd adds the following new options:
    as the last process has closed it, all data is freed and /dev/initrd
    can't be opened anymore.
-  root=/dev/ram0   (without devfs)
+  root=/dev/ram0
-  root=/dev/rd/0   (with devfs)
    initrd is mounted as root, and the normal boot procedure is followed,
    with the RAM disk still mounted as root.
@@ -90,8 +89,7 @@ you're building an install floppy), the root file system creation
 procedure should create the /initrd directory.
 If initrd will not be mounted in some cases, its content is still
-accessible if the following device has been created (note that this
+accessible if the following device has been created:
-does not work if using devfs):
 # mknod /dev/initrd b 1 250 
 # chmod 400 /dev/initrd
@@ -119,8 +117,7 @@ We'll describe the loopback device method:
    (if space is critical, you may want to use the Minix FS instead of Ext2)
 3) mount the file system, e.g.
    # mount -t ext2 -o loop initrd /mnt
- 4) create the console device (not necessary if using devfs, but it can't
+ 4) create the console device:
-    hurt to do it anyway):
    # mkdir /mnt/dev
    # mknod /mnt/dev/console c 5 1
 5) copy all the files that are needed to properly use the initrd
@@ -152,12 +149,7 @@ have to be given:
  root=/dev/ram0 init=/linuxrc rw
-if not using devfs, or
+(rw is only necessary if writing to the initrd file system.)
-  root=/dev/rd/0 init=/linuxrc rw
-if using devfs. (rw is only necessary if writing to the initrd file
-system.)
 With LOADLIN, you simply execute
@@ -217,9 +209,9 @@ following command:
 # exec chroot . what-follows <dev/console >dev/console 2>&1
 Where what-follows is a program under the new root, e.g. /sbin/init
-If the new root file system will be used with devfs and has no valid
+If the new root file system will be used with udev and has no valid
-/dev directory, devfs must be mounted before invoking chroot in order to
+/dev directory, udev must be initialized before invoking chroot in order
-provide /dev/console.
+to provide /dev/console.
 Note: implementation details of pivot_root may change with time. In order
 to ensure compatibility, the following points should be observed:
@@ -236,7 +228,7 @@ Now, the initrd can be unmounted and the memory allocated by the RAM
 disk can be freed:
 # umount /initrd
-# blockdev --flushbufs /dev/ram0    # /dev/rd/0 if using devfs
+# blockdev --flushbufs /dev/ram0
 It is also possible to use initrd with an NFS-mounted root, see the
 pivot_root(8) man page for details.
diff --git a/Documentation/ioctl-number.txt b/Documentation/ioctl-number.txt
index 1543802ef53e..edc04d74ae23 100644
--- a/Documentation/ioctl-number.txt
+++ b/Documentation/ioctl-number.txt
@@ -119,7 +119,6 @@ Code	Seq#	Include File		Comments
 'c'     00-7F   linux/comstats.h        conflict!
 'c'     00-7F   linux/coda.h            conflict!
 'd'     00-FF   linux/char/drm/drm/h    conflict!
-'d'     00-1F   linux/devfs_fs.h        conflict!
 'd'     00-DF   linux/video_decoder.h   conflict!
 'd'     F0-FF   linux/digi1.h
 'e'     all     linux/digi1.h           conflict!
diff --git a/Documentation/kernel-parameters.txt b/Documentation/kernel-parameters.txt
index 25f8d20dac53..86e9282d1c20 100644
--- a/Documentation/kernel-parameters.txt
+++ b/Documentation/kernel-parameters.txt
@@ -35,7 +35,6 @@ parameter is applicable:
        APM     Advanced Power Management support is enabled.
        AX25    Appropriate AX.25 support is enabled.
        CD      Appropriate CD support is enabled.
-        DEVFS   devfs support is enabled.
        DRM     Direct Rendering Management support is enabled.
        EDD     BIOS Enhanced Disk Drive Services (EDD) is enabled
        EFI     EFI Partitioning (GPT) is enabled
@@ -440,9 +439,6 @@ running once the system is up.
                        Format: <area>[,<node>]
                        See also Documentation/networking/decnet.txt.
-        devfs=          [DEVFS]
-                        See Documentation/filesystems/devfs/boot-options.
        dhash_entries=  [KNL]
                        Set number of hash buckets for dentry cache.
author	Linus Torvalds <torvalds@g5.osdl.org>	2006-06-29 17:19:21 -0400
committer	Linus Torvalds <torvalds@g5.osdl.org>	2006-06-29 17:19:21 -0400
commit	602cada851b28c5792339786efe872fbdc1f5d41 (patch)
tree	233d474b74d6038b5bb54a07ad91dd1bb10b0218 /Documentation
parent	82991c6f2c361acc17279b8124d9bf1878973435 (diff)
parent	fee68d1cc0d9bd863e51c16cdcd707737b16bb38 (diff)