Merge branch 'master' of master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6

12 files changed, 265 insertions, 12 deletions

diff --git a/Documentation/DocBook/Makefile b/Documentation/DocBook/Makefile
index a3a83d38f96f..8918a32c6b3a 100644
--- a/Documentation/DocBook/Makefile
+++ b/Documentation/DocBook/Makefile
@@ -31,7 +31,7 @@ PS_METHOD	= $(prefer-db2x)
 
 ###
 # The targets that may be used.
-PHONY += xmldocs sgmldocs psdocs pdfdocs htmldocs mandocs installmandocs
+PHONY += xmldocs sgmldocs psdocs pdfdocs htmldocs mandocs installmandocs cleandocs
 
 BOOKS := $(addprefix $(obj)/,$(DOCBOOKS))
 xmldocs: $(BOOKS)
@@ -213,11 +213,12 @@ silent_gen_xml = :
 dochelp:
         @echo  ' Linux kernel internal documentation in different formats:'
         @echo  '  htmldocs        - HTML'
-        @echo  '  installmandocs  - install man pages generated by mandocs'
-        @echo  '  mandocs         - man pages'
         @echo  '  pdfdocs         - PDF'
         @echo  '  psdocs          - Postscript'
         @echo  '  xmldocs         - XML DocBook'
+        @echo  '  mandocs         - man pages'
+        @echo  '  installmandocs  - install man pages generated by mandocs'
+        @echo  '  cleandocs       - clean all generated DocBook files'
 
 ###
 # Temporary files left by various tools
@@ -235,6 +236,10 @@ clean-files := $(DOCBOOKS) \
 
 clean-dirs := $(patsubst %.xml,%,$(DOCBOOKS)) man
 
+cleandocs:
+        $(Q)rm -f $(call objectify, $(clean-files))
+        $(Q)rm -rf $(call objectify, $(clean-dirs))
+
 # Declare the contents of the .PHONY variable as phony.  We keep that
 # information in a variable se we can use it in if_changed and friends.
 
diff --git a/Documentation/cgroups/cpuacct.txt b/Documentation/cgroups/cpuacct.txt
index bb775fbe43d7..8b930946c52a 100644
--- a/Documentation/cgroups/cpuacct.txt
+++ b/Documentation/cgroups/cpuacct.txt
@@ -30,3 +30,21 @@ The above steps create a new group g1 and move the current shell
 process (bash) into it. CPU time consumed by this bash and its children
 can be obtained from g1/cpuacct.usage and the same is accumulated in
 /cgroups/cpuacct.usage also.
+
+cpuacct.stat file lists a few statistics which further divide the
+CPU time obtained by the cgroup into user and system times. Currently
+the following statistics are supported:
+
+user: Time spent by tasks of the cgroup in user mode.
+system: Time spent by tasks of the cgroup in kernel mode.
+
+user and system are in USER_HZ unit.
+
+cpuacct controller uses percpu_counter interface to collect user and
+system times. This has two side effects:
+
+- It is theoretically possible to see wrong values for user and system times.
+  This is because percpu_counter_read() on 32bit systems isn't safe
+  against concurrent writes.
+- It is possible to see slightly outdated values for user and system times
+  due to the batch processing nature of percpu_counter.
diff --git a/Documentation/feature-removal-schedule.txt b/Documentation/feature-removal-schedule.txt
index 7e2af10e8264..de491a3e2313 100644
--- a/Documentation/feature-removal-schedule.txt
+++ b/Documentation/feature-removal-schedule.txt
@@ -428,3 +428,12 @@ Why:	In 2.6.27, the semantics of /sys/bus/pci/slots was redefined to
         After a reasonable transition period, we will remove the legacy
         fakephp interface.
 Who:    Alex Chiang <achiang@hp.com>
+
+---------------------------
+
+What:   i2c-voodoo3 driver
+When:   October 2009
+Why:    Superseded by tdfxfb. I2C/DDC support used to live in a separate
+        driver but this caused driver conflicts.
+Who:    Jean Delvare <khali@linux-fr.org>
+        Krzysztof Helt <krzysztof.h1@wp.pl>
diff --git a/Documentation/infiniband/ipoib.txt b/Documentation/infiniband/ipoib.txt
index 864ff3283780..6d40f00b358c 100644
--- a/Documentation/infiniband/ipoib.txt
+++ b/Documentation/infiniband/ipoib.txt
@@ -24,6 +24,49 @@ Partitions and P_Keys
   The P_Key for any interface is given by the "pkey" file, and the
   main interface for a subinterface is in "parent."
 
+Datagram vs Connected modes
+
+  The IPoIB driver supports two modes of operation: datagram and
+  connected.  The mode is set and read through an interface's
+  /sys/class/net/<intf name>/mode file.
+
+  In datagram mode, the IB UD (Unreliable Datagram) transport is used
+  and so the interface MTU has is equal to the IB L2 MTU minus the
+  IPoIB encapsulation header (4 bytes).  For example, in a typical IB
+  fabric with a 2K MTU, the IPoIB MTU will be 2048 - 4 = 2044 bytes.
+
+  In connected mode, the IB RC (Reliable Connected) transport is used.
+  Connected mode is to takes advantage of the connected nature of the
+  IB transport and allows an MTU up to the maximal IP packet size of
+  64K, which reduces the number of IP packets needed for handling
+  large UDP datagrams, TCP segments, etc and increases the performance
+  for large messages.
+
+  In connected mode, the interface's UD QP is still used for multicast
+  and communication with peers that don't support connected mode. In
+  this case, RX emulation of ICMP PMTU packets is used to cause the
+  networking stack to use the smaller UD MTU for these neighbours.
+
+Stateless offloads
+
+  If the IB HW supports IPoIB stateless offloads, IPoIB advertises
+  TCP/IP checksum and/or Large Send (LSO) offloading capability to the
+  network stack.
+
+  Large Receive (LRO) offloading is also implemented and may be turned
+  on/off using ethtool calls.  Currently LRO is supported only for
+  checksum offload capable devices.
+
+  Stateless offloads are supported only in datagram mode.  
+
+Interrupt moderation
+
+  If the underlying IB device supports CQ event moderation, one can
+  use ethtool to set interrupt mitigation parameters and thus reduce
+  the overhead incurred by handling interrupts.  The main code path of
+  IPoIB doesn't use events for TX completion signaling so only RX
+  moderation is supported.
+
 Debugging Information
 
   By compiling the IPoIB driver with CONFIG_INFINIBAND_IPOIB_DEBUG set
@@ -55,3 +98,5 @@ References
     http://ietf.org/rfc/rfc4391.txt 
   IP over InfiniBand (IPoIB) Architecture (RFC 4392)
     http://ietf.org/rfc/rfc4392.txt 
+  IP over InfiniBand: Connected Mode (RFC 4755)
+    http://ietf.org/rfc/rfc4755.txt
diff --git a/Documentation/input/rotary-encoder.txt b/Documentation/input/rotary-encoder.txt
new file mode 100644
index 000000000000..435102a26d96
--- /dev/null
+++ b/Documentation/input/rotary-encoder.txt
@@ -0,0 +1,101 @@
+rotary-encoder - a generic driver for GPIO connected devices
+Daniel Mack <daniel@caiaq.de>, Feb 2009
+
+0. Function
+-----------
+
+Rotary encoders are devices which are connected to the CPU or other
+peripherals with two wires. The outputs are phase-shifted by 90 degrees
+and by triggering on falling and rising edges, the turn direction can
+be determined.
+
+The phase diagram of these two outputs look like this:
+
+                  _____       _____       _____
+                 |     |     |     |     |     |
+  Channel A  ____|     |_____|     |_____|     |____
+
+                 :  :  :  :  :  :  :  :  :  :  :  :
+            __       _____       _____       _____
+              |     |     |     |     |     |     |
+  Channel B   |_____|     |_____|     |_____|     |__
+
+                 :  :  :  :  :  :  :  :  :  :  :  :
+  Event          a  b  c  d  a  b  c  d  a  b  c  d
+
+                |<-------->|
+                  one step
+
+
+For more information, please see
+        http://en.wikipedia.org/wiki/Rotary_encoder
+
+
+1. Events / state machine
+-------------------------
+
+a) Rising edge on channel A, channel B in low state
+        This state is used to recognize a clockwise turn
+
+b) Rising edge on channel B, channel A in high state
+        When entering this state, the encoder is put into 'armed' state,
+        meaning that there it has seen half the way of a one-step transition.
+
+c) Falling edge on channel A, channel B in high state
+        This state is used to recognize a counter-clockwise turn
+
+d) Falling edge on channel B, channel A in low state
+        Parking position. If the encoder enters this state, a full transition
+        should have happend, unless it flipped back on half the way. The
+        'armed' state tells us about that.
+
+2. Platform requirements
+------------------------
+
+As there is no hardware dependent call in this driver, the platform it is
+used with must support gpiolib. Another requirement is that IRQs must be
+able to fire on both edges.
+
+
+3. Board integration
+--------------------
+
+To use this driver in your system, register a platform_device with the
+name 'rotary-encoder' and associate the IRQs and some specific platform
+data with it.
+
+struct rotary_encoder_platform_data is declared in
+include/linux/rotary-encoder.h and needs to be filled with the number of
+steps the encoder has and can carry information about externally inverted
+signals (because of used invertig buffer or other reasons).
+
+Because GPIO to IRQ mapping is platform specific, this information must
+be given in seperately to the driver. See the example below.
+
+---------<snip>---------
+
+/* board support file example */
+
+#include <linux/input.h>
+#include <linux/rotary_encoder.h>
+
+#define GPIO_ROTARY_A 1
+#define GPIO_ROTARY_B 2
+
+static struct rotary_encoder_platform_data my_rotary_encoder_info = {
+        .steps          = 24,
+        .axis           = ABS_X,
+        .gpio_a         = GPIO_ROTARY_A,
+        .gpio_b         = GPIO_ROTARY_B,
+        .inverted_a     = 0,
+        .inverted_b     = 0,
+};
+
+static struct platform_device rotary_encoder_device = {
+        .name           = "rotary-encoder",
+        .id             = 0,
+        .dev            = {
+                .platform_data = &my_rotary_encoder_info,
+        }
+};
+
diff --git a/Documentation/kbuild/makefiles.txt b/Documentation/kbuild/makefiles.txt
index 51104f9194a5..d4b05672f9f7 100644
--- a/Documentation/kbuild/makefiles.txt
+++ b/Documentation/kbuild/makefiles.txt
@@ -40,10 +40,16 @@ This document describes the Linux kernel Makefiles.
            --- 6.7 Custom kbuild commands
            --- 6.8 Preprocessing linker scripts
 
-        === 7 Kbuild Variables
-        === 8 Makefile language
-        === 9 Credits
-        === 10 TODO
+        === 7 Kbuild syntax for exported headers
+                --- 7.1 header-y
+                --- 7.2 objhdr-y
+                --- 7.3 destination-y
+                --- 7.4 unifdef-y (deprecated)
+
+        === 8 Kbuild Variables
+        === 9 Makefile language
+        === 10 Credits
+        === 11 TODO
 
 === 1 Overview
 
@@ -1143,8 +1149,69 @@ When kbuild executes, the following steps are followed (roughly):
         The kbuild infrastructure for *lds file are used in several
         architecture-specific files.
 
+=== 7 Kbuild syntax for exported headers
+
+The kernel include a set of headers that is exported to userspace.
+Many headers can be exported as-is but other headers requires  a
+minimal pre-processing before they are ready for user-space.
+The pre-processing does:
+- drop kernel specific annotations
+- drop include of compiler.h
+- drop all sections that is kernel internat (guarded by ifdef __KERNEL__)
+
+Each relevant directory contain a file name "Kbuild" which specify the
+headers to be exported.
+See subsequent chapter for the syntax of the Kbuild file.
+
+        --- 7.1 header-y
+
+        header-y specify header files to be exported.
+
+                Example:
+                        #include/linux/Kbuild
+                        header-y += usb/
+                        header-y += aio_abi.h
+
+        The convention is to list one file per line and
+        preferably in alphabetic order.
+
+        header-y also specify which subdirectories to visit.
+        A subdirectory is identified by a trailing '/' which
+        can be seen in the example above for the usb subdirectory.
+
+        Subdirectories are visited before their parent directories.
+
+        --- 7.2 objhdr-y
+
+        objhdr-y specifies generated files to be exported.
+        Generated files are special as they need to be looked
+        up in another directory when doing 'make O=...' builds.
+
+                Example:
+                        #include/linux/Kbuild
+                        objhdr-y += version.h
+
+        --- 7.3 destination-y
+
+        When an architecture have a set of exported headers that needs to be
+        exported to a different directory destination-y is used.
+        destination-y specify the destination directory for all exported
+        headers in the file where it is present.
+
+                Example:
+                        #arch/xtensa/platforms/s6105/include/platform/Kbuild
+                        destination-y := include/linux
+
+        In the example above all exported headers in the Kbuild file
+        will be located in the directory "include/linux" when exported.
+
+
+        --- 7.4 unifdef-y (deprecated)
+
+        unifdef-y is deprecated. A direct replacement is header-y.
+
 
-=== 7 Kbuild Variables
+=== 8 Kbuild Variables
 
 The top Makefile exports the following variables:
 
@@ -1206,7 +1273,7 @@ The top Makefile exports the following variables:
         INSTALL_MOD_STRIP will used as the option(s) to the strip command.
 
 
-=== 8 Makefile language
+=== 9 Makefile language
 
 The kernel Makefiles are designed to be run with GNU Make.  The Makefiles
 use only the documented features of GNU Make, but they do use many
@@ -1225,14 +1292,14 @@ time the left-hand side is used.
 There are some cases where "=" is appropriate.  Usually, though, ":="
 is the right choice.
 
-=== 9 Credits
+=== 10 Credits
 
 Original version made by Michael Elizabeth Chastain, <mailto:mec@shout.net>
 Updates by Kai Germaschewski <kai@tp1.ruhr-uni-bochum.de>
 Updates by Sam Ravnborg <sam@ravnborg.org>
 Language QA by Jan Engelhardt <jengelh@gmx.de>
 
-=== 10 TODO
+=== 11 TODO
 
 - Describe how kbuild supports shipped files with _shipped.
 - Generating offset header files.
diff --git a/Documentation/networking/bonding.txt b/Documentation/networking/bonding.txt
index 5ede7473b425..08762750f121 100644
--- a/Documentation/networking/bonding.txt
+++ b/Documentation/networking/bonding.txt
@@ -1242,7 +1242,7 @@ monitoring is enabled, and vice-versa.
 To add ARP targets:
 # echo +192.168.0.100 > /sys/class/net/bond0/bonding/arp_ip_target
 # echo +192.168.0.101 > /sys/class/net/bond0/bonding/arp_ip_target
-        NOTE:  up to 10 target addresses may be specified.
+        NOTE:  up to 16 target addresses may be specified.
 
 To remove an ARP target:
 # echo -192.168.0.100 > /sys/class/net/bond0/bonding/arp_ip_target
diff --git a/Documentation/sparse.txt b/Documentation/sparse.txt
index 42f43fa59f24..34c76a55bc04 100644
--- a/Documentation/sparse.txt
+++ b/Documentation/sparse.txt
@@ -42,6 +42,14 @@ sure that bitwise types don't get mixed up (little-endian vs big-endian
 vs cpu-endian vs whatever), and there the constant "0" really _is_
 special.
 
+__bitwise__ - to be used for relatively compact stuff (gfp_t, etc.) that
+is mostly warning-free and is supposed to stay that way.  Warnings will
+be generated without __CHECK_ENDIAN__.
+
+__bitwise - noisy stuff; in particular, __le*/__be* are that.  We really
+don't want to drown in noise unless we'd explicitly asked for it.
+
+
 Getting sparse
 ~~~~~~~~~~~~~~
 
diff --git a/Documentation/ftrace.txt b/Documentation/trace/ftrace.txt
index fd9a3e693813..fd9a3e693813 100644
--- a/Documentation/ftrace.txt
+++ b/Documentation/trace/ftrace.txt
diff --git a/Documentation/vm/kmemtrace.txt b/Documentation/trace/kmemtrace.txt
index a956d9b7f943..a956d9b7f943 100644
--- a/Documentation/vm/kmemtrace.txt
+++ b/Documentation/trace/kmemtrace.txt
diff --git a/Documentation/tracers/mmiotrace.txt b/Documentation/trace/mmiotrace.txt
index 5731c67abc55..5731c67abc55 100644
--- a/Documentation/tracers/mmiotrace.txt
+++ b/Documentation/trace/mmiotrace.txt
diff --git a/Documentation/tracepoints.txt b/Documentation/trace/tracepoints.txt
index c0e1ceed75a4..c0e1ceed75a4 100644
--- a/Documentation/tracepoints.txt
+++ b/Documentation/trace/tracepoints.txt