Merge of rsync://rsync.kernel.org/pub/scm/linux/kernel/git/gregkh/aoe-2.6.git/

2 files changed, 36 insertions, 8 deletions

diff --git a/Documentation/aoe/aoe.txt b/Documentation/aoe/aoe.txt
index 43e50108d0e2..3a4dbe4663c9 100644
--- a/Documentation/aoe/aoe.txt
+++ b/Documentation/aoe/aoe.txt
@@ -4,6 +4,16 @@ The EtherDrive (R) HOWTO for users of 2.6 kernels is found at ...
 
   It has many tips and hints!
 
+The aoetools are userland programs that are designed to work with this
+driver.  The aoetools are on sourceforge.
+
+  http://aoetools.sourceforge.net/
+
+The scripts in this Documentation/aoe directory are intended to
+document the use of the driver and are not necessary if you install
+the aoetools.
+
+
 CREATING DEVICE NODES
 
   Users of udev should find the block device nodes created
@@ -35,14 +45,15 @@ USING DEVICE NODES
 
   "echo eth2 eth4 > /dev/etherd/interfaces" tells the aoe driver to
   limit ATA over Ethernet traffic to eth2 and eth4.  AoE traffic from
-  untrusted networks should be ignored as a matter of security.
+  untrusted networks should be ignored as a matter of security.  See
+  also the aoe_iflist driver option described below.
 
   "echo > /dev/etherd/discover" tells the driver to find out what AoE
   devices are available.
 
   These character devices may disappear and be replaced by sysfs
-  counterparts, so distribution maintainers are encouraged to create
-  scripts that use these devices.
+  counterparts.  Using the commands in aoetools insulates users from
+  these implementation details.
 
   The block devices are named like this:
 
@@ -66,7 +77,8 @@ USING SYSFS
   through which we are communicating with the remote AoE device.
 
   There is a script in this directory that formats this information
-  in a convenient way.
+  in a convenient way.  Users with aoetools can use the aoe-stat
+  command.
 
   root@makki root# sh Documentation/aoe/status.sh 
      e10.0            eth3              up
@@ -89,3 +101,23 @@ USING SYSFS
       e4.7            eth1              up
       e4.8            eth1              up
       e4.9            eth1              up
+
+  Use /sys/module/aoe/parameters/aoe_iflist (or better, the driver
+  option discussed below) instead of /dev/etherd/interfaces to limit
+  AoE traffic to the network interfaces in the given
+  whitespace-separated list.  Unlike the old character device, the
+  sysfs entry can be read from as well as written to.
+
+  It's helpful to trigger discovery after setting the list of allowed
+  interfaces.  The aoetools package provides an aoe-discover script
+  for this purpose.  You can also directly use the
+  /dev/etherd/discover special file described above.
+
+DRIVER OPTIONS
+
+  There is a boot option for the built-in aoe driver and a
+  corresponding module parameter, aoe_iflist.  Without this option,
+  all network interfaces may be used for ATA over Ethernet.  Here is a
+  usage example for the module parameter.
+
+    modprobe aoe_iflist="eth1 eth3"
diff --git a/Documentation/aoe/status.sh b/Documentation/aoe/status.sh
index 6628116d4a9f..751f3be514b8 100644
--- a/Documentation/aoe/status.sh
+++ b/Documentation/aoe/status.sh
@@ -14,10 +14,6 @@ test ! -d "$sysd/block" && {
         echo "$me Error: sysfs is not mounted" 1>&2
         exit 1
 }
-test -z "`lsmod | grep '^aoe'`" && {
-        echo  "$me Error: aoe module is not loaded" 1>&2
-        exit 1
-}
 
 for d in `ls -d $sysd/block/etherd* 2>/dev/null | grep -v p` end; do
         # maybe ls comes up empty, so we use "end"