Merge branch 'hwmon-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jdelvare/staging

* 'hwmon-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jdelvare/staging: (23 commits)
  hwmon: (lm75) Add support for the Texas Instruments TMP105
  hwmon: (ltc4245) Read only one GPIO pin
  hwmon: (dme1737) Add SCH5127 support
  hwmon: (tmp102) Don't always stop chip at exit
  hwmon: (tmp102) Fix suspend and resume functions
  hwmon: (tmp102) Various fixes
  hwmon: Driver for TI TMP102 temperature sensor
  hwmon: EMC1403 thermal sensor support
  hwmon: (applesmc) Add temperature sensor labels to sysfs interface
  hwmon: (applesmc) Add generic support for MacBook Pro 7
  hwmon: (applesmc) Add generic support for MacBook Pro 6
  hwmon: (applesmc) Add support for MacBook Pro 5,3 and 5,4
  hwmon: (tmp401) Reorganize code to get rid of static forward declarations
  hwmon: (tmp401) Use constants for sysfs file permissions
  hwmon: (adm1031) Allow setting update rate
  hwmon: Add description of the update_rate sysfs attribute
  hwmon: (lm90) Use programmed update rate
  hwmon: (f71882fg) Acquire I/O regions while we're working with them
  hwmon: (f71882fg) Code cleanup
  hwmon: (f71882fg) Use strict_stro(l|ul) instead of simple_strto$1
  ...

5 files changed, 85 insertions, 16 deletions

diff --git a/Documentation/hwmon/dme1737 b/Documentation/hwmon/dme1737
index 001d2e70bc11..fc5df7654d63 100644
--- a/Documentation/hwmon/dme1737
+++ b/Documentation/hwmon/dme1737
@@ -9,11 +9,15 @@ Supported chips:
   * SMSC SCH3112, SCH3114, SCH3116
     Prefix: 'sch311x'
     Addresses scanned: none, address read from Super-I/O config space
-    Datasheet: http://www.nuhorizons.com/FeaturedProducts/Volume1/SMSC/311x.pdf
+    Datasheet: Available on the Internet
   * SMSC SCH5027
     Prefix: 'sch5027'
     Addresses scanned: I2C 0x2c, 0x2d, 0x2e
     Datasheet: Provided by SMSC upon request and under NDA
+  * SMSC SCH5127
+    Prefix: 'sch5127'
+    Addresses scanned: none, address read from Super-I/O config space
+    Datasheet: Provided by SMSC upon request and under NDA
 
 Authors:
     Juerg Haefliger <juergh@gmail.com>
@@ -36,8 +40,8 @@ Description
 -----------
 
 This driver implements support for the hardware monitoring capabilities of the
-SMSC DME1737 and Asus A8000 (which are the same), SMSC SCH5027, and SMSC
-SCH311x Super-I/O chips. These chips feature monitoring of 3 temp sensors
+SMSC DME1737 and Asus A8000 (which are the same), SMSC SCH5027, SCH311x,
+and SCH5127 Super-I/O chips. These chips feature monitoring of 3 temp sensors
 temp[1-3] (2 remote diodes and 1 internal), 7 voltages in[0-6] (6 external and
 1 internal) and up to 6 fan speeds fan[1-6]. Additionally, the chips implement
 up to 5 PWM outputs pwm[1-3,5-6] for controlling fan speeds both manually and
@@ -48,14 +52,14 @@ Fan[3-6] and pwm[3,5-6] are optional features and their availability depends on
 the configuration of the chip. The driver will detect which features are
 present during initialization and create the sysfs attributes accordingly.
 
-For the SCH311x, fan[1-3] and pwm[1-3] are always present and fan[4-6] and
-pwm[5-6] don't exist.
+For the SCH311x and SCH5127, fan[1-3] and pwm[1-3] are always present and
+fan[4-6] and pwm[5-6] don't exist.
 
 The hardware monitoring features of the DME1737, A8000, and SCH5027 are only
-accessible via SMBus, while the SCH311x only provides access via the ISA bus.
-The driver will therefore register itself as an I2C client driver if it detects
-a DME1737, A8000, or SCH5027 and as a platform driver if it detects a SCH311x
-chip.
+accessible via SMBus, while the SCH311x and SCH5127 only provide access via
+the ISA bus. The driver will therefore register itself as an I2C client driver
+if it detects a DME1737, A8000, or SCH5027 and as a platform driver if it
+detects a SCH311x or SCH5127 chip.
 
 
 Voltage Monitoring
@@ -76,7 +80,7 @@ DME1737, A8000:
         in6: Vbat       (+3.0V)                 0V - 4.38V
 
 SCH311x:
-        in0: +2.5V                              0V - 6.64V
+        in0: +2.5V                              0V - 3.32V
         in1: Vccp       (processor core)        0V - 2V
         in2: VCC        (internal +3.3V)        0V - 4.38V
         in3: +5V                                0V - 6.64V
@@ -93,6 +97,15 @@ SCH5027:
         in5: VTR        (+3.3V standby)         0V - 4.38V
         in6: Vbat       (+3.0V)                 0V - 4.38V
 
+SCH5127:
+        in0: +2.5                               0V - 3.32V
+        in1: Vccp       (processor core)        0V - 3V
+        in2: VCC        (internal +3.3V)        0V - 4.38V
+        in3: V2_IN                              0V - 1.5V
+        in4: V1_IN                              0V - 1.5V
+        in5: VTR        (+3.3V standby)         0V - 4.38V
+        in6: Vbat       (+3.0V)                 0V - 4.38V
+
 Each voltage input has associated min and max limits which trigger an alarm
 when crossed.
 
@@ -293,3 +306,21 @@ pwm[1-3]_auto_point1_pwm	RW	Auto PWM pwm point. Auto_point1 is the
 pwm[1-3]_auto_point2_pwm        RO      Auto PWM pwm point. Auto_point2 is the
                                         full-speed duty-cycle which is hard-
                                         wired to 255 (100% duty-cycle).
+
+Chip Differences
+----------------
+
+Feature                 dme1737 sch311x sch5027 sch5127
+-------------------------------------------------------
+temp[1-3]_offset        yes     yes
+vid                     yes
+zone3                   yes     yes     yes
+zone[1-3]_hyst          yes     yes
+pwm min/off             yes     yes
+fan3                    opt     yes     opt     yes
+pwm3                    opt     yes     opt     yes
+fan4                    opt             opt
+fan5                    opt             opt
+pwm5                    opt             opt
+fan6                    opt             opt
+pwm6                    opt             opt
diff --git a/Documentation/hwmon/lm63 b/Documentation/hwmon/lm63
index 31660bf97979..b9843eab1afb 100644
--- a/Documentation/hwmon/lm63
+++ b/Documentation/hwmon/lm63
@@ -7,6 +7,11 @@ Supported chips:
     Addresses scanned: I2C 0x4c
     Datasheet: Publicly available at the National Semiconductor website
                http://www.national.com/pf/LM/LM63.html
+  * National Semiconductor LM64
+    Prefix: 'lm64'
+    Addresses scanned: I2C 0x18 and 0x4e
+    Datasheet: Publicly available at the National Semiconductor website
+               http://www.national.com/pf/LM/LM64.html
 
 Author: Jean Delvare <khali@linux-fr.org>
 
@@ -55,3 +60,5 @@ The lm63 driver will not update its values more frequently than every
 second; reading them more often will do no harm, but will return 'old'
 values.
 
+The LM64 is effectively an LM63 with GPIO lines. The driver does not
+support these GPIO lines at present.
diff --git a/Documentation/hwmon/ltc4245 b/Documentation/hwmon/ltc4245
index 02838a47d862..86b5880d8502 100644
--- a/Documentation/hwmon/ltc4245
+++ b/Documentation/hwmon/ltc4245
@@ -72,9 +72,7 @@ in6_min_alarm		5v  output undervoltage alarm
 in7_min_alarm           3v  output undervoltage alarm
 in8_min_alarm           Vee (-12v) output undervoltage alarm
 
-in9_input               GPIO #1 voltage data
-in10_input              GPIO #2 voltage data
-in11_input              GPIO #3 voltage data
+in9_input               GPIO voltage data
 
 power1_input            12v power usage (mW)
 power2_input            5v  power usage (mW)
diff --git a/Documentation/hwmon/sysfs-interface b/Documentation/hwmon/sysfs-interface
index 3de6b0bcb147..d4e2917c6f18 100644
--- a/Documentation/hwmon/sysfs-interface
+++ b/Documentation/hwmon/sysfs-interface
@@ -80,9 +80,9 @@ All entries (except name) are optional, and should only be created in a
 given driver if the chip has the feature.
 
 
-********
-* Name *
-********
+*********************
+* Global attributes *
+*********************
 
 name            The chip name.
                 This should be a short, lowercase string, not containing
@@ -91,6 +91,13 @@ name		The chip name.
                 I2C devices get this attribute created automatically.
                 RO
 
+update_rate     The rate at which the chip will update readings.
+                Unit: millisecond
+                RW
+                Some devices have a variable update rate. This attribute
+                can be used to change the update rate to the desired
+                frequency.
+
 
 ************
 * Voltages *
diff --git a/Documentation/hwmon/tmp102 b/Documentation/hwmon/tmp102
new file mode 100644
index 000000000000..8454a7763122
--- /dev/null
+++ b/Documentation/hwmon/tmp102
@@ -0,0 +1,26 @@
+Kernel driver tmp102
+====================
+
+Supported chips:
+  * Texas Instruments TMP102
+    Prefix: 'tmp102'
+    Addresses scanned: none
+    Datasheet: http://focus.ti.com/docs/prod/folders/print/tmp102.html
+
+Author:
+        Steven King <sfking@fdwdc.com>
+
+Description
+-----------
+
+The Texas Instruments TMP102 implements one temperature sensor.  Limits can be
+set through the Overtemperature Shutdown register and Hysteresis register.  The
+sensor is accurate to 0.5 degree over the range of -25 to +85 C, and to 1.0
+degree from -40 to +125 C. Resolution of the sensor is 0.0625 degree.  The
+operating temperature has a minimum of -55 C and a maximum of +150 C.
+
+The TMP102 has a programmable update rate that can select between 8, 4, 1, and
+0.5 Hz. (Currently the driver only supports the default of 4 Hz).
+
+The driver provides the common sysfs-interface for temperatures (see
+Documentation/hwmon/sysfs-interface under Temperatures).