mfd: tps65217: Set PMIC to shutdown on PWR_EN toggle

Set tps65217 PMIC status to OFF if power enable toggle is supported.
By setting this bit to 1 to enter PMIC to OFF state when PWR_EN pin
is pulled low. Also adds a DT flag to specify that device pmic
supports shutdown control or not.

Signed-off-by: Colin Foe-Parker <colin.foeparker@logicpd.com>
[anilkumar@ti.com: move the additions to tps65217 MFD driver]
Signed-off-by: AnilKumar Ch <anilkumar@ti.com>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>

1 files changed, 4 insertions, 0 deletions

diff --git a/Documentation/devicetree/bindings/regulator/tps65217.txt b/Documentation/devicetree/bindings/regulator/tps65217.txt
index d316fb895daf..4f05d208c95c 100644
--- a/Documentation/devicetree/bindings/regulator/tps65217.txt
+++ b/Documentation/devicetree/bindings/regulator/tps65217.txt
@@ -11,6 +11,9 @@ Required properties:
   using the standard binding for regulators found at
   Documentation/devicetree/bindings/regulator/regulator.txt.
 
+Optional properties:
+- ti,pmic-shutdown-controller: Telling the PMIC to shutdown on PWR_EN toggle.
+
   The valid names for regulators are:
   tps65217: dcdc1, dcdc2, dcdc3, ldo1, ldo2, ldo3 and ldo4
 
@@ -20,6 +23,7 @@ Example:
 
         tps: tps@24 {
                 compatible = "ti,tps65217";
+                ti,pmic-shutdown-controller;
 
                 regulators {
                         dcdc1_reg: dcdc1 {