Merge commit 'gcl/gcl-next'

1 files changed, 57 insertions, 0 deletions

diff --git a/Documentation/powerpc/booting-without-of.txt b/Documentation/powerpc/booting-without-of.txt
index ea1b70b35793..99514ced82c5 100644
--- a/Documentation/powerpc/booting-without-of.txt
+++ b/Documentation/powerpc/booting-without-of.txt
@@ -59,6 +59,7 @@ Table of Contents
       p) Freescale Synchronous Serial Interface
           q) USB EHCI controllers
       r) MDIO on GPIOs
+      s) SPI busses
 
   VII - Marvell Discovery mv64[345]6x System Controller chips
     1) The /system-controller node
@@ -1883,6 +1884,62 @@ platforms are moved over to use the flattened-device-tree model.
                          &qe_pio_c 6>;
         };
 
+    s) SPI (Serial Peripheral Interface) busses
+
+    SPI busses can be described with a node for the SPI master device
+    and a set of child nodes for each SPI slave on the bus.  For this
+    discussion, it is assumed that the system's SPI controller is in
+    SPI master mode.  This binding does not describe SPI controllers
+    in slave mode.
+
+    The SPI master node requires the following properties:
+    - #address-cells  - number of cells required to define a chip select
+                        address on the SPI bus.
+    - #size-cells     - should be zero.
+    - compatible      - name of SPI bus controller following generic names
+                        recommended practice.
+    No other properties are required in the SPI bus node.  It is assumed
+    that a driver for an SPI bus device will understand that it is an SPI bus.
+    However, the binding does not attempt to define the specific method for
+    assigning chip select numbers.  Since SPI chip select configuration is
+    flexible and non-standardized, it is left out of this binding with the
+    assumption that board specific platform code will be used to manage
+    chip selects.  Individual drivers can define additional properties to
+    support describing the chip select layout.
+
+    SPI slave nodes must be children of the SPI master node and can
+    contain the following properties.
+    - reg             - (required) chip select address of device.
+    - compatible      - (required) name of SPI device following generic names
+                        recommended practice
+    - spi-max-frequency - (required) Maximum SPI clocking speed of device in Hz
+    - spi-cpol        - (optional) Empty property indicating device requires
+                        inverse clock polarity (CPOL) mode
+    - spi-cpha        - (optional) Empty property indicating device requires
+                        shifted clock phase (CPHA) mode
+
+    SPI example for an MPC5200 SPI bus:
+                spi@f00 {
+                        #address-cells = <1>;
+                        #size-cells = <0>;
+                        compatible = "fsl,mpc5200b-spi","fsl,mpc5200-spi";
+                        reg = <0xf00 0x20>;
+                        interrupts = <2 13 0 2 14 0>;
+                        interrupt-parent = <&mpc5200_pic>;
+
+                        ethernet-switch@0 {
+                                compatible = "micrel,ks8995m";
+                                spi-max-frequency = <1000000>;
+                                reg = <0>;
+                        };
+
+                        codec@1 {
+                                compatible = "ti,tlv320aic26";
+                                spi-max-frequency = <100000>;
+                                reg = <1>;
+                        };
+                };
+
 VII - Marvell Discovery mv64[345]6x System Controller chips
 ===========================================================