Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/hid

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/hid: (59 commits)
  HID: fix up 'EMBEDDED' mess in Kconfig
  HID: roccat: cleanup preprocessor macros
  HID: roccat: refactor special event handling
  HID: roccat: fix special button support
  HID: roccat: Correctly mark init and exit functions
  HID: hidraw: Use Interrupt Endpoint for OUT Transfers if Available
  HID: hid-samsung: remove redundant key mappings
  HID: add omitted hid-zydacron.c file
  HID: hid-samsung: add support for Creative Desktop Wireless 6000
  HID: picolcd: Eliminate use after free
  HID: Zydacron Remote Control driver
  HID: Use kmemdup
  HID: magicmouse: fix input registration
  HID: make Prodikeys driver standalone config option
  HID: Prodikeys PC-MIDI HID Driver
  HID: hidraw: fix indentation
  HID: ntrig: add filtering module parameters
  HID: ntrig: add sysfs access to filter parameters
  HID: ntrig: add sensitivity and responsiveness support
  HID: add multi-input quirk for eGalax Touchcontroller
  ...

4 files changed, 193 insertions, 0 deletions

diff --git a/Documentation/ABI/testing/sysfs-driver-hid-picolcd b/Documentation/ABI/testing/sysfs-driver-hid-picolcd
new file mode 100644
index 000000000000..08579e7e1e89
--- /dev/null
+++ b/Documentation/ABI/testing/sysfs-driver-hid-picolcd
@@ -0,0 +1,43 @@
+What:           /sys/bus/usb/devices/<busnum>-<devnum>:<config num>.<interface num>/<hid-bus>:<vendor-id>:<product-id>.<num>/operation_mode
+Date:           March 2010
+Contact:        Bruno Prémont <bonbons@linux-vserver.org>
+Description:    Make it possible to switch the PicoLCD device between LCD
+                (firmware) and bootloader (flasher) operation modes.
+
+                Reading: returns list of available modes, the active mode being
+                enclosed in brackets ('[' and ']')
+
+                Writing: causes operation mode switch. Permitted values are
+                the non-active mode names listed when read.
+
+                Note: when switching mode the current PicoLCD HID device gets
+                disconnected and reconnects after above delay (see attribute
+                operation_mode_delay for its value).
+
+
+What:           /sys/bus/usb/devices/<busnum>-<devnum>:<config num>.<interface num>/<hid-bus>:<vendor-id>:<product-id>.<num>/operation_mode_delay
+Date:           April 2010
+Contact:        Bruno Prémont <bonbons@linux-vserver.org>
+Description:    Delay PicoLCD waits before restarting in new mode when
+                operation_mode has changed.
+
+                Reading/Writing: It is expressed in ms and permitted range is
+                0..30000ms.
+
+
+What:           /sys/bus/usb/devices/<busnum>-<devnum>:<config num>.<interface num>/<hid-bus>:<vendor-id>:<product-id>.<num>/fb_update_rate
+Date:           March 2010
+Contact:        Bruno Prémont <bonbons@linux-vserver.org>
+Description:    Make it possible to adjust defio refresh rate.
+
+                Reading: returns list of available refresh rates (expressed in Hz),
+                the active refresh rate being enclosed in brackets ('[' and ']')
+
+                Writing: accepts new refresh rate expressed in integer Hz
+                within permitted rates.
+
+                Note: As device can barely do 2 complete refreshes a second
+                it only makes sense to adjust this value if only one or two
+                tiles get changed and it's not appropriate to expect the application
+                to flush it's tiny changes explicitely at higher than default rate.
+
diff --git a/Documentation/ABI/testing/sysfs-driver-hid-prodikeys b/Documentation/ABI/testing/sysfs-driver-hid-prodikeys
new file mode 100644
index 000000000000..05d988c29a83
--- /dev/null
+++ b/Documentation/ABI/testing/sysfs-driver-hid-prodikeys
@@ -0,0 +1,29 @@
+What:           /sys/bus/hid/drivers/prodikeys/.../channel
+Date:           April 2010
+KernelVersion:  2.6.34
+Contact:        Don Prince <dhprince.devel@yahoo.co.uk>
+Description:
+                Allows control (via software) the midi channel to which
+                that the pc-midi keyboard will output.midi data.
+                Range: 0..15
+                Type:  Read/write
+What:           /sys/bus/hid/drivers/prodikeys/.../sustain
+Date:           April 2010
+KernelVersion:  2.6.34
+Contact:        Don Prince <dhprince.devel@yahoo.co.uk>
+Description:
+                Allows control (via software) the sustain duration of a
+                note held by the pc-midi driver.
+                0 means sustain mode is disabled.
+                Range: 0..5000 (milliseconds)
+                Type:  Read/write
+What:           /sys/bus/hid/drivers/prodikeys/.../octave
+Date:           April 2010
+KernelVersion:  2.6.34
+Contact:        Don Prince <dhprince.devel@yahoo.co.uk>
+Description:
+                Controls the octave shift modifier in the pc-midi driver.
+                The octave can be shifted via software up/down 2 octaves.
+                0 means the no ocatve shift.
+                Range: -2..2 (minus 2 to plus 2)
+                Type: Read/Write
diff --git a/Documentation/ABI/testing/sysfs-driver-hid-roccat-kone b/Documentation/ABI/testing/sysfs-driver-hid-roccat-kone
new file mode 100644
index 000000000000..88340a23ce91
--- /dev/null
+++ b/Documentation/ABI/testing/sysfs-driver-hid-roccat-kone
@@ -0,0 +1,111 @@
+What:           /sys/bus/usb/devices/<busnum>-<devnum>:<config num>.<interface num>/actual_dpi
+Date:           March 2010
+Contact:        Stefan Achatz <erazor_de@users.sourceforge.net>
+Description:    It is possible to switch the dpi setting of the mouse with the
+                press of a button.
+                When read, this file returns the raw number of the actual dpi
+                setting reported by the mouse. This number has to be further
+                processed to receive the real dpi value.
+
+                VALUE DPI
+                1     800
+                2     1200
+                3     1600
+                4     2000
+                5     2400
+                6     3200
+
+                This file is readonly.
+
+What:           /sys/bus/usb/devices/<busnum>-<devnum>:<config num>.<interface num>/actual_profile
+Date:           March 2010
+Contact:        Stefan Achatz <erazor_de@users.sourceforge.net>
+Description:    When read, this file returns the number of the actual profile.
+                This file is readonly.
+
+What:           /sys/bus/usb/devices/<busnum>-<devnum>:<config num>.<interface num>/firmware_version
+Date:           March 2010
+Contact:        Stefan Achatz <erazor_de@users.sourceforge.net>
+Description:    When read, this file returns the raw integer version number of the
+                firmware reported by the mouse. Using the integer value eases
+                further usage in other programs. To receive the real version
+                number the decimal point has to be shifted 2 positions to the
+                left. E.g. a returned value of 138 means 1.38
+                This file is readonly.
+
+What:           /sys/bus/usb/devices/<busnum>-<devnum>:<config num>.<interface num>/kone_driver_version
+Date:           March 2010
+Contact:        Stefan Achatz <erazor_de@users.sourceforge.net>
+Description:    When read, this file returns the driver version.
+                The format of the string is "v<major>.<minor>.<patchlevel>".
+                This attribute is used by the userland tools to find the sysfs-
+                paths of installed kone-mice and determine the capabilites of
+                the driver. Versions of this driver for old kernels replace
+                usbhid instead of generic-usb. The way to scan for this file
+                has been chosen to provide a consistent way for all supported
+                kernel versions.
+                This file is readonly.
+
+What:           /sys/bus/usb/devices/<busnum>-<devnum>:<config num>.<interface num>/profile[1-5]
+Date:           March 2010
+Contact:        Stefan Achatz <erazor_de@users.sourceforge.net>
+Description:    The mouse can store 5 profiles which can be switched by the
+                press of a button. A profile holds informations like button
+                mappings, sensitivity, the colors of the 5 leds and light
+                effects.
+                When read, these files return the respective profile. The
+                returned data is 975 bytes in size.
+                When written, this file lets one write the respective profile
+                data back to the mouse. The data has to be 975 bytes long.
+                The mouse will reject invalid data, whereas the profile number
+                stored in the profile doesn't need to fit the number of the
+                store.
+
+What:           /sys/bus/usb/devices/<busnum>-<devnum>:<config num>.<interface num>/settings
+Date:           March 2010
+Contact:        Stefan Achatz <erazor_de@users.sourceforge.net>
+Description:    When read, this file returns the settings stored in the mouse.
+                The size of the data is 36 bytes and holds information like the
+                startup_profile, tcu state and calibration_data.
+                When written, this file lets write settings back to the mouse.
+                The data has to be 36 bytes long. The mouse will reject invalid
+                data.
+
+What:           /sys/bus/usb/devices/<busnum>-<devnum>:<config num>.<interface num>/startup_profile
+Date:           March 2010
+Contact:        Stefan Achatz <erazor_de@users.sourceforge.net>
+Description:    The integer value of this attribute ranges from 1 to 5.
+                When read, this attribute returns the number of the profile
+                that's active when the mouse is powered on.
+                When written, this file sets the number of the startup profile
+                and the mouse activates this profile immediately.
+
+What:           /sys/bus/usb/devices/<busnum>-<devnum>:<config num>.<interface num>/tcu
+Date:           March 2010
+Contact:        Stefan Achatz <erazor_de@users.sourceforge.net>
+Description:    The mouse has a "Tracking Control Unit" which lets the user
+                calibrate the laser power to fit the mousepad surface.
+                When read, this file returns the current state of the TCU,
+                where 0 means off and 1 means on.
+                Writing 0 in this file will switch the TCU off.
+                Writing 1 in this file will start the calibration which takes
+                around 6 seconds to complete and activates the TCU.
+
+What:           /sys/bus/usb/devices/<busnum>-<devnum>:<config num>.<interface num>/weight
+Date:           March 2010
+Contact:        Stefan Achatz <erazor_de@users.sourceforge.net>
+Description:    The mouse can be equipped with one of four supplied weights
+                ranging from 5 to 20 grams which are recognized by the mouse
+                and its value can be read out. When read, this file returns the
+                raw value returned by the mouse which eases further processing
+                in other software.
+                The values map to the weights as follows:
+
+                VALUE WEIGHT
+                0     none
+                1     5g
+                2     10g
+                3     15g
+                4     20g
+
+                This file is readonly.
diff --git a/Documentation/ABI/testing/sysfs-wacom b/Documentation/ABI/testing/sysfs-wacom
new file mode 100644
index 000000000000..1517976e25c4
--- /dev/null
+++ b/Documentation/ABI/testing/sysfs-wacom
@@ -0,0 +1,10 @@
+What:           /sys/class/hidraw/hidraw*/device/speed
+Date:           April 2010
+Kernel Version: 2.6.35
+Contact:        linux-bluetooth@vger.kernel.org
+Description:
+                The /sys/class/hidraw/hidraw*/device/speed file controls
+                reporting speed of wacom bluetooth tablet. Reading from
+                this file returns 1 if tablet reports in high speed mode
+                or 0 otherwise. Writing to this file one of these values
+                switches reporting speed.