Merge commit 'v2.6.34-rc6' into sched/core

9 files changed, 82 insertions, 42 deletions

diff --git a/Documentation/HOWTO b/Documentation/HOWTO
index f5395af88a41..40ada93b820a 100644
--- a/Documentation/HOWTO
+++ b/Documentation/HOWTO
@@ -234,7 +234,7 @@ process is as follows:
     Linus, usually the patches that have already been included in the
     -next kernel for a few weeks.  The preferred way to submit big changes
     is using git (the kernel's source management tool, more information
-    can be found at http://git.or.cz/) but plain patches are also just
+    can be found at http://git-scm.com/) but plain patches are also just
     fine.
   - After two weeks a -rc1 kernel is released it is now possible to push
     only patches that do not include new features that could affect the
diff --git a/Documentation/RCU/NMI-RCU.txt b/Documentation/RCU/NMI-RCU.txt
index a6d32e65d222..a8536cb88091 100644
--- a/Documentation/RCU/NMI-RCU.txt
+++ b/Documentation/RCU/NMI-RCU.txt
@@ -34,7 +34,7 @@ NMI handler.
                 cpu = smp_processor_id();
                 ++nmi_count(cpu);
 
-                if (!rcu_dereference(nmi_callback)(regs, cpu))
+                if (!rcu_dereference_sched(nmi_callback)(regs, cpu))
                         default_do_nmi(regs);
 
                 nmi_exit();
@@ -47,12 +47,13 @@ function pointer.  If this handler returns zero, do_nmi() invokes the
 default_do_nmi() function to handle a machine-specific NMI.  Finally,
 preemption is restored.
 
-Strictly speaking, rcu_dereference() is not needed, since this code runs
-only on i386, which does not need rcu_dereference() anyway.  However,
-it is a good documentation aid, particularly for anyone attempting to
-do something similar on Alpha.
+In theory, rcu_dereference_sched() is not needed, since this code runs
+only on i386, which in theory does not need rcu_dereference_sched()
+anyway.  However, in practice it is a good documentation aid, particularly
+for anyone attempting to do something similar on Alpha or on systems
+with aggressive optimizing compilers.
 
-Quick Quiz:  Why might the rcu_dereference() be necessary on Alpha,
+Quick Quiz:  Why might the rcu_dereference_sched() be necessary on Alpha,
              given that the code referenced by the pointer is read-only?
 
 
@@ -99,17 +100,21 @@ invoke irq_enter() and irq_exit() on NMI entry and exit, respectively.
 
 Answer to Quick Quiz
 
-        Why might the rcu_dereference() be necessary on Alpha, given
+        Why might the rcu_dereference_sched() be necessary on Alpha, given
         that the code referenced by the pointer is read-only?
 
         Answer: The caller to set_nmi_callback() might well have
-                initialized some data that is to be used by the
-                new NMI handler.  In this case, the rcu_dereference()
-                would be needed, because otherwise a CPU that received
-                an NMI just after the new handler was set might see
-                the pointer to the new NMI handler, but the old
-                pre-initialized version of the handler's data.
-
-                More important, the rcu_dereference() makes it clear
-                to someone reading the code that the pointer is being
-                protected by RCU.
+                initialized some data that is to be used by the new NMI
+                handler.  In this case, the rcu_dereference_sched() would
+                be needed, because otherwise a CPU that received an NMI
+                just after the new handler was set might see the pointer
+                to the new NMI handler, but the old pre-initialized
+                version of the handler's data.
+
+                This same sad story can happen on other CPUs when using
+                a compiler with aggressive pointer-value speculation
+                optimizations.
+
+                More important, the rcu_dereference_sched() makes it
+                clear to someone reading the code that the pointer is
+                being protected by RCU-sched.
diff --git a/Documentation/RCU/checklist.txt b/Documentation/RCU/checklist.txt
index cbc180f90194..790d1a812376 100644
--- a/Documentation/RCU/checklist.txt
+++ b/Documentation/RCU/checklist.txt
@@ -260,7 +260,8 @@ over a rather long period of time, but improvements are always welcome!
         The reason that it is permissible to use RCU list-traversal
         primitives when the update-side lock is held is that doing so
         can be quite helpful in reducing code bloat when common code is
-        shared between readers and updaters.
+        shared between readers and updaters.  Additional primitives
+        are provided for this case, as discussed in lockdep.txt.
 
 10.     Conversely, if you are in an RCU read-side critical section,
         and you don't hold the appropriate update-side lock, you -must-
@@ -344,8 +345,8 @@ over a rather long period of time, but improvements are always welcome!
         requiring SRCU's read-side deadlock immunity or low read-side
         realtime latency.
 
-        Note that, rcu_assign_pointer() and rcu_dereference() relate to
-        SRCU just as they do to other forms of RCU.
+        Note that, rcu_assign_pointer() relates to SRCU just as they do
+        to other forms of RCU.
 
 15.     The whole point of call_rcu(), synchronize_rcu(), and friends
         is to wait until all pre-existing readers have finished before
diff --git a/Documentation/RCU/lockdep.txt b/Documentation/RCU/lockdep.txt
index fe24b58627bd..d7a49b2f6994 100644
--- a/Documentation/RCU/lockdep.txt
+++ b/Documentation/RCU/lockdep.txt
@@ -32,9 +32,20 @@ checking of rcu_dereference() primitives:
         srcu_dereference(p, sp):
                 Check for SRCU read-side critical section.
         rcu_dereference_check(p, c):
-                Use explicit check expression "c".
+                Use explicit check expression "c".  This is useful in
+                code that is invoked by both readers and updaters.
         rcu_dereference_raw(p)
                 Don't check.  (Use sparingly, if at all.)
+        rcu_dereference_protected(p, c):
+                Use explicit check expression "c", and omit all barriers
+                and compiler constraints.  This is useful when the data
+                structure cannot change, for example, in code that is
+                invoked only by updaters.
+        rcu_access_pointer(p):
+                Return the value of the pointer and omit all barriers,
+                but retain the compiler constraints that prevent duplicating
+                or coalescsing.  This is useful when when testing the
+                value of the pointer itself, for example, against NULL.
 
 The rcu_dereference_check() check expression can be any boolean
 expression, but would normally include one of the rcu_read_lock_held()
@@ -59,7 +70,20 @@ In case (1), the pointer is picked up in an RCU-safe manner for vanilla
 RCU read-side critical sections, in case (2) the ->file_lock prevents
 any change from taking place, and finally, in case (3) the current task
 is the only task accessing the file_struct, again preventing any change
-from taking place.
+from taking place.  If the above statement was invoked only from updater
+code, it could instead be written as follows:
+
+        file = rcu_dereference_protected(fdt->fd[fd],
+                                         lockdep_is_held(&files->file_lock) ||
+                                         atomic_read(&files->count) == 1);
+
+This would verify cases #2 and #3 above, and furthermore lockdep would
+complain if this was used in an RCU read-side critical section unless one
+of these two cases held.  Because rcu_dereference_protected() omits all
+barriers and compiler constraints, it generates better code than do the
+other flavors of rcu_dereference().  On the other hand, it is illegal
+to use rcu_dereference_protected() if either the RCU-protected pointer
+or the RCU-protected data that it points to can change concurrently.
 
 There are currently only "universal" versions of the rcu_assign_pointer()
 and RCU list-/tree-traversal primitives, which do not (yet) check for
diff --git a/Documentation/RCU/whatisRCU.txt b/Documentation/RCU/whatisRCU.txt
index 1dc00ee97163..cfaac34c4557 100644
--- a/Documentation/RCU/whatisRCU.txt
+++ b/Documentation/RCU/whatisRCU.txt
@@ -840,6 +840,12 @@ SRCU:	Initialization/cleanup
         init_srcu_struct
         cleanup_srcu_struct
 
+All:  lockdep-checked RCU-protected pointer access
+
+        rcu_dereference_check
+        rcu_dereference_protected
+        rcu_access_pointer
+
 See the comment headers in the source code (or the docbook generated
 from them) for more information.
 
diff --git a/Documentation/cgroups/cgroups.txt b/Documentation/cgroups/cgroups.txt
index fd588ff0e296..a1ca5924faff 100644
--- a/Documentation/cgroups/cgroups.txt
+++ b/Documentation/cgroups/cgroups.txt
@@ -235,8 +235,7 @@ containing the following files describing that cgroup:
  - cgroup.procs: list of tgids in the cgroup.  This list is not
    guaranteed to be sorted or free of duplicate tgids, and userspace
    should sort/uniquify the list if this property is required.
-   Writing a tgid into this file moves all threads with that tgid into
-   this cgroup.
+   This is a read-only file, for now.
  - notify_on_release flag: run the release agent on exit?
  - release_agent: the path to use for release notifications (this file
    exists in the top cgroup only)
diff --git a/Documentation/input/multi-touch-protocol.txt b/Documentation/input/multi-touch-protocol.txt
index 8490480ce432..c0fc1c75fd88 100644
--- a/Documentation/input/multi-touch-protocol.txt
+++ b/Documentation/input/multi-touch-protocol.txt
@@ -68,6 +68,22 @@ like:
    SYN_MT_REPORT
    SYN_REPORT
 
+Here is the sequence after lifting one of the fingers:
+
+   ABS_MT_POSITION_X
+   ABS_MT_POSITION_Y
+   SYN_MT_REPORT
+   SYN_REPORT
+
+And here is the sequence after lifting the remaining finger:
+
+   SYN_MT_REPORT
+   SYN_REPORT
+
+If the driver reports one of BTN_TOUCH or ABS_PRESSURE in addition to the
+ABS_MT events, the last SYN_MT_REPORT event may be omitted. Otherwise, the
+last SYN_REPORT will be dropped by the input core, resulting in no
+zero-finger event reaching userland.
 
 Event Semantics
 ---------------
@@ -217,11 +233,6 @@ where examples can be found.
 difference between the contact position and the approaching tool position
 could be used to derive tilt.
 [2] The list can of course be extended.
-[3] The multi-touch X driver is currently in the prototyping stage. At the
-time of writing (April 2009), the MT protocol is not yet merged, and the
-prototype implements finger matching, basic mouse support and two-finger
-scrolling. The project aims at improving the quality of current multi-touch
-functionality available in the Synaptics X driver, and in addition
-implement more advanced gestures.
+[3] Multitouch X driver project: http://bitmath.org/code/multitouch/.
 [4] See the section on event computation.
 [5] See the section on finger tracking.
diff --git a/Documentation/kernel-parameters.txt b/Documentation/kernel-parameters.txt
index e4cbca58536c..839b21b0699a 100644
--- a/Documentation/kernel-parameters.txt
+++ b/Documentation/kernel-parameters.txt
@@ -320,11 +320,6 @@ and is between 256 and 4096 characters. It is defined in the file
         amd_iommu=      [HW,X86-84]
                         Pass parameters to the AMD IOMMU driver in the system.
                         Possible values are:
-                        isolate - enable device isolation (each device, as far
-                                  as possible, will get its own protection
-                                  domain) [default]
-                        share - put every device behind one IOMMU into the
-                                same protection domain
                         fullflush - enable flushing of IO/TLB entries when
                                     they are unmapped. Otherwise they are
                                     flushed before they will be reused, which
@@ -1199,7 +1194,7 @@ and is between 256 and 4096 characters. It is defined in the file
 
         libata.force=   [LIBATA] Force configurations.  The format is comma
                         separated list of "[ID:]VAL" where ID is
-                        PORT[:DEVICE].  PORT and DEVICE are decimal numbers
+                        PORT[.DEVICE].  PORT and DEVICE are decimal numbers
                         matching port, link or device.  Basically, it matches
                         the ATA ID string printed on console by libata.  If
                         the whole ID part is omitted, the last PORT and DEVICE
diff --git a/Documentation/stable_kernel_rules.txt b/Documentation/stable_kernel_rules.txt
index 5effa5bd993b..e213f45cf9d7 100644
--- a/Documentation/stable_kernel_rules.txt
+++ b/Documentation/stable_kernel_rules.txt
@@ -18,16 +18,15 @@ Rules on what kind of patches are accepted, and which ones are not, into the
  - It cannot contain any "trivial" fixes in it (spelling changes,
    whitespace cleanups, etc).
  - It must follow the Documentation/SubmittingPatches rules.
- - It or an equivalent fix must already exist in Linus' tree.  Quote the
-   respective commit ID in Linus' tree in your patch submission to -stable.
+ - It or an equivalent fix must already exist in Linus' tree (upstream).
 
 
 Procedure for submitting patches to the -stable tree:
 
  - Send the patch, after verifying that it follows the above rules, to
-   stable@kernel.org.
- - To have the patch automatically included in the stable tree, add the
-   the tag
+   stable@kernel.org.  You must note the upstream commit ID in the changelog
+   of your submission.
+ - To have the patch automatically included in the stable tree, add the tag
      Cc: stable@kernel.org
    in the sign-off area. Once the patch is merged it will be applied to
    the stable tree without anything else needing to be done by the author