Merge git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb-2.6

* git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb-2.6: (141 commits)
  USB: mct_u232: fix broken close
  USB: gadget: amd5536udc.c: fix error path
  USB: imx21-hcd - fix off by one resource size calculation
  usb: gadget: fix Kconfig warning
  usb: r8a66597-udc: Add processing when USB was removed.
  mxc_udc: add workaround for ENGcm09152 for i.MX35
  USB: ftdi_sio: add device ids for ScienceScope
  USB: musb: AM35x: Workaround for fifo read issue
  USB: musb: add musb support for AM35x
  USB: AM35x: Add musb support
  usb: Fix linker errors with CONFIG_PM=n
  USB: ohci-sh - use resource_size instead of defining its own resource_len macro
  USB: isp1362-hcd - use resource_size instead of defining its own resource_len macro
  USB: isp116x-hcd - use resource_size instead of defining its own resource_len macro
  USB: xhci: Fix compile error when CONFIG_PM=n
  USB: accept some invalid ep0-maxpacket values
  USB: xHCI: PCI power management implementation
  USB: xHCI: bus power management implementation
  USB: xHCI: port remote wakeup implementation
  USB: xHCI: port power management implementation
  ...

Manually fix up (non-data) conflict: the SCSI merge gad renamed the
'hw_sector_size' member to 'physical_block_size', and the USB tree
brought a new use of it.

3 files changed, 48 insertions, 13 deletions

diff --git a/Documentation/devices.txt b/Documentation/devices.txt
index 6a08fd731d28..c58abf1ccc71 100644
--- a/Documentation/devices.txt
+++ b/Documentation/devices.txt
@@ -2554,7 +2554,10 @@ Your cooperation is appreciated.
                 175 = /dev/usb/legousbtower15   16th USB Legotower device
                 176 = /dev/usb/usbtmc1  First USB TMC device
                    ...
-                192 = /dev/usb/usbtmc16 16th USB TMC device
+                191 = /dev/usb/usbtmc16 16th USB TMC device
+                192 = /dev/usb/yurex1   First USB Yurex device
+                   ...
+                209 = /dev/usb/yurex16  16th USB Yurex device
                 240 = /dev/usb/dabusb0  First daubusb device
                     ...
                 243 = /dev/usb/dabusb3  Fourth dabusb device
diff --git a/Documentation/powerpc/dts-bindings/fsl/usb.txt b/Documentation/powerpc/dts-bindings/fsl/usb.txt
index b00152402694..bd5723f0b67e 100644
--- a/Documentation/powerpc/dts-bindings/fsl/usb.txt
+++ b/Documentation/powerpc/dts-bindings/fsl/usb.txt
@@ -8,6 +8,7 @@ and additions :
 Required properties :
  - compatible : Should be "fsl-usb2-mph" for multi port host USB
    controllers, or "fsl-usb2-dr" for dual role USB controllers
+   or "fsl,mpc5121-usb2-dr" for dual role USB controllers of MPC5121
  - phy_type : For multi port host USB controllers, should be one of
    "ulpi", or "serial". For dual role USB controllers, should be
    one of "ulpi", "utmi", "utmi_wide", or "serial".
@@ -33,6 +34,12 @@ Recommended properties :
  - interrupt-parent : the phandle for the interrupt controller that
    services interrupts for this device.
 
+Optional properties :
+ - fsl,invert-drvvbus : boolean; for MPC5121 USB0 only. Indicates the
+   port power polarity of internal PHY signal DRVVBUS is inverted.
+ - fsl,invert-pwr-fault : boolean; for MPC5121 USB0 only. Indicates
+   the PWR_FAULT signal polarity is inverted.
+
 Example multi port host USB controller device node :
         usb@22000 {
                 compatible = "fsl-usb2-mph";
@@ -57,3 +64,18 @@ Example dual role USB controller device node :
                 dr_mode = "otg";
                 phy = "ulpi";
         };
+
+Example dual role USB controller device node for MPC5121ADS:
+
+        usb@4000 {
+                compatible = "fsl,mpc5121-usb2-dr";
+                reg = <0x4000 0x1000>;
+                #address-cells = <1>;
+                #size-cells = <0>;
+                interrupt-parent = < &ipic >;
+                interrupts = <44 0x8>;
+                dr_mode = "otg";
+                phy_type = "utmi_wide";
+                fsl,invert-drvvbus;
+                fsl,invert-pwr-fault;
+        };
diff --git a/Documentation/usb/proc_usb_info.txt b/Documentation/usb/proc_usb_info.txt
index fafcd4723260..afe596d5f201 100644
--- a/Documentation/usb/proc_usb_info.txt
+++ b/Documentation/usb/proc_usb_info.txt
@@ -1,12 +1,17 @@
 /proc/bus/usb filesystem output
 ===============================
-(version 2003.05.30)
+(version 2010.09.13)
 
 
 The usbfs filesystem for USB devices is traditionally mounted at
 /proc/bus/usb.  It provides the /proc/bus/usb/devices file, as well as
 the /proc/bus/usb/BBB/DDD files.
 
+In many modern systems the usbfs filsystem isn't used at all.  Instead
+USB device nodes are created under /dev/usb/ or someplace similar.  The
+"devices" file is available in debugfs, typically as
+/sys/kernel/debug/usb/devices.
+
 
 **NOTE**: If /proc/bus/usb appears empty, and a host controller
           driver has been linked, then you need to mount the
@@ -106,8 +111,8 @@ Legend:
 
 Topology info:
 
-T:  Bus=dd Lev=dd Prnt=dd Port=dd Cnt=dd Dev#=ddd Spd=ddd MxCh=dd
-|   |      |      |       |       |      |        |       |__MaxChildren
+T:  Bus=dd Lev=dd Prnt=dd Port=dd Cnt=dd Dev#=ddd Spd=dddd MxCh=dd
+|   |      |      |       |       |      |        |        |__MaxChildren
 |   |      |      |       |       |      |        |__Device Speed in Mbps
 |   |      |      |       |       |      |__DeviceNumber
 |   |      |      |       |       |__Count of devices at this level
@@ -120,8 +125,13 @@ T:  Bus=dd Lev=dd Prnt=dd Port=dd Cnt=dd Dev#=ddd Spd=ddd MxCh=dd
     Speed may be:
         1.5     Mbit/s for low speed USB
         12      Mbit/s for full speed USB
-        480     Mbit/s for high speed USB (added for USB 2.0)
+        480     Mbit/s for high speed USB (added for USB 2.0);
+                  also used for Wireless USB, which has no fixed speed
+        5000    Mbit/s for SuperSpeed USB (added for USB 3.0)
 
+    For reasons lost in the mists of time, the Port number is always
+    too low by 1.  For example, a device plugged into port 4 will
+    show up with "Port=03".
 
 Bandwidth info:
 B:  Alloc=ddd/ddd us (xx%), #Int=ddd, #Iso=ddd
@@ -291,7 +301,7 @@ Here's an example, from a system which has a UHCI root hub,
 an external hub connected to the root hub, and a mouse and
 a serial converter connected to the external hub.
 
-T:  Bus=00 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#=  1 Spd=12  MxCh= 2
+T:  Bus=00 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#=  1 Spd=12   MxCh= 2
 B:  Alloc= 28/900 us ( 3%), #Int=  2, #Iso=  0
 D:  Ver= 1.00 Cls=09(hub  ) Sub=00 Prot=00 MxPS= 8 #Cfgs=  1
 P:  Vendor=0000 ProdID=0000 Rev= 0.00
@@ -301,21 +311,21 @@ C:* #Ifs= 1 Cfg#= 1 Atr=40 MxPwr=  0mA
 I:  If#= 0 Alt= 0 #EPs= 1 Cls=09(hub  ) Sub=00 Prot=00 Driver=hub
 E:  Ad=81(I) Atr=03(Int.) MxPS=   8 Ivl=255ms
 
-T:  Bus=00 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#=  2 Spd=12  MxCh= 4
+T:  Bus=00 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#=  2 Spd=12   MxCh= 4
 D:  Ver= 1.00 Cls=09(hub  ) Sub=00 Prot=00 MxPS= 8 #Cfgs=  1
 P:  Vendor=0451 ProdID=1446 Rev= 1.00
 C:* #Ifs= 1 Cfg#= 1 Atr=e0 MxPwr=100mA
 I:  If#= 0 Alt= 0 #EPs= 1 Cls=09(hub  ) Sub=00 Prot=00 Driver=hub
 E:  Ad=81(I) Atr=03(Int.) MxPS=   1 Ivl=255ms
 
-T:  Bus=00 Lev=02 Prnt=02 Port=00 Cnt=01 Dev#=  3 Spd=1.5 MxCh= 0
+T:  Bus=00 Lev=02 Prnt=02 Port=00 Cnt=01 Dev#=  3 Spd=1.5  MxCh= 0
 D:  Ver= 1.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS= 8 #Cfgs=  1
 P:  Vendor=04b4 ProdID=0001 Rev= 0.00
 C:* #Ifs= 1 Cfg#= 1 Atr=80 MxPwr=100mA
 I:  If#= 0 Alt= 0 #EPs= 1 Cls=03(HID  ) Sub=01 Prot=02 Driver=mouse
 E:  Ad=81(I) Atr=03(Int.) MxPS=   3 Ivl= 10ms
 
-T:  Bus=00 Lev=02 Prnt=02 Port=02 Cnt=02 Dev#=  4 Spd=12  MxCh= 0
+T:  Bus=00 Lev=02 Prnt=02 Port=02 Cnt=02 Dev#=  4 Spd=12   MxCh= 0
 D:  Ver= 1.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS= 8 #Cfgs=  1
 P:  Vendor=0565 ProdID=0001 Rev= 1.08
 S:  Manufacturer=Peracom Networks, Inc.
@@ -330,12 +340,12 @@ E:  Ad=82(I) Atr=03(Int.) MxPS=   8 Ivl=  8ms
 Selecting only the "T:" and "I:" lines from this (for example, by using
 "procusb ti"), we have:
 
-T:  Bus=00 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#=  1 Spd=12  MxCh= 2
-T:  Bus=00 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#=  2 Spd=12  MxCh= 4
+T:  Bus=00 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#=  1 Spd=12   MxCh= 2
+T:  Bus=00 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#=  2 Spd=12   MxCh= 4
 I:  If#= 0 Alt= 0 #EPs= 1 Cls=09(hub  ) Sub=00 Prot=00 Driver=hub
-T:  Bus=00 Lev=02 Prnt=02 Port=00 Cnt=01 Dev#=  3 Spd=1.5 MxCh= 0
+T:  Bus=00 Lev=02 Prnt=02 Port=00 Cnt=01 Dev#=  3 Spd=1.5  MxCh= 0
 I:  If#= 0 Alt= 0 #EPs= 1 Cls=03(HID  ) Sub=01 Prot=02 Driver=mouse
-T:  Bus=00 Lev=02 Prnt=02 Port=02 Cnt=02 Dev#=  4 Spd=12  MxCh= 0
+T:  Bus=00 Lev=02 Prnt=02 Port=02 Cnt=02 Dev#=  4 Spd=12   MxCh= 0
 I:  If#= 0 Alt= 0 #EPs= 3 Cls=00(>ifc ) Sub=00 Prot=00 Driver=serial