Merge branch 'master' of master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6

2 files changed, 96 insertions, 12 deletions

diff --git a/Documentation/ABI/testing/sysfs-platform-at91 b/Documentation/ABI/testing/sysfs-platform-at91
new file mode 100644
index 000000000000..4cc6a865ae66
--- /dev/null
+++ b/Documentation/ABI/testing/sysfs-platform-at91
@@ -0,0 +1,25 @@
+What:           /sys/devices/platform/at91_can/net/<iface>/mb0_id
+Date:           January 2011
+KernelVersion:  2.6.38
+Contact:        Marc Kleine-Budde <kernel@pengutronix.de>
+Description:
+                Value representing the can_id of mailbox 0.
+
+                Default: 0x7ff (standard frame)
+
+                Due to a chip bug (errata 50.2.6.3 & 50.3.5.3 in
+                "AT91SAM9263 Preliminary 6249H-ATARM-27-Jul-09") the
+                contents of mailbox 0 may be send under certain
+                conditions (even if disabled or in rx mode).
+
+                The workaround in the errata suggests not to use the
+                mailbox and load it with an unused identifier.
+
+                In order to use an extended can_id add the
+                CAN_EFF_FLAG (0x80000000U) to the can_id. Example:
+
+                - standard id 0x7ff:
+                echo 0x7ff      > /sys/class/net/can0/mb0_id
+
+                - extended id 0x1fffffff:
+                echo 0x9fffffff > /sys/class/net/can0/mb0_id
diff --git a/Documentation/networking/bonding.txt b/Documentation/networking/bonding.txt
index 5dc638791d97..25d2f4141d27 100644
--- a/Documentation/networking/bonding.txt
+++ b/Documentation/networking/bonding.txt
@@ -49,7 +49,8 @@ Table of Contents
 3.3     Configuring Bonding Manually with Ifenslave
 3.3.1           Configuring Multiple Bonds Manually
 3.4     Configuring Bonding Manually via Sysfs
-3.5     Overriding Configuration for Special Cases
+3.5     Configuration with Interfaces Support
+3.6     Overriding Configuration for Special Cases
 
 4. Querying Bonding Configuration
 4.1     Bonding Configuration
@@ -161,8 +162,8 @@ onwards) do not have /usr/include/linux symbolically linked to the
 default kernel source include directory.
 
 SECOND IMPORTANT NOTE:
-        If you plan to configure bonding using sysfs, you do not need
-to use ifenslave.
+        If you plan to configure bonding using sysfs or using the
+/etc/network/interfaces file, you do not need to use ifenslave.
 
 2. Bonding Driver Options
 =========================
@@ -779,22 +780,26 @@ resend_igmp
 
         You can configure bonding using either your distro's network
 initialization scripts, or manually using either ifenslave or the
-sysfs interface.  Distros generally use one of two packages for the
-network initialization scripts: initscripts or sysconfig.  Recent
-versions of these packages have support for bonding, while older
+sysfs interface.  Distros generally use one of three packages for the
+network initialization scripts: initscripts, sysconfig or interfaces.
+Recent versions of these packages have support for bonding, while older
 versions do not.
 
         We will first describe the options for configuring bonding for
-distros using versions of initscripts and sysconfig with full or
-partial support for bonding, then provide information on enabling
+distros using versions of initscripts, sysconfig and interfaces with full
+or partial support for bonding, then provide information on enabling
 bonding without support from the network initialization scripts (i.e.,
 older versions of initscripts or sysconfig).
 
-        If you're unsure whether your distro uses sysconfig or
-initscripts, or don't know if it's new enough, have no fear.
+        If you're unsure whether your distro uses sysconfig,
+initscripts or interfaces, or don't know if it's new enough, have no fear.
 Determining this is fairly straightforward.
 
-        First, issue the command:
+        First, look for a file called interfaces in /etc/network directory.
+If this file is present in your system, then your system use interfaces. See
+Configuration with Interfaces Support.
+
+        Else, issue the command:
 
 $ rpm -qf /sbin/ifup
 
@@ -1327,8 +1332,62 @@ echo 2000 > /sys/class/net/bond1/bonding/arp_interval
 echo +eth2 > /sys/class/net/bond1/bonding/slaves
 echo +eth3 > /sys/class/net/bond1/bonding/slaves
 
-3.5 Overriding Configuration for Special Cases
+3.5 Configuration with Interfaces Support
+-----------------------------------------
+
+        This section applies to distros which use /etc/network/interfaces file
+to describe network interface configuration, most notably Debian and it's
+derivatives.
+
+        The ifup and ifdown commands on Debian don't support bonding out of
+the box. The ifenslave-2.6 package should be installed to provide bonding
+support.  Once installed, this package will provide bond-* options to be used
+into /etc/network/interfaces.
+
+        Note that ifenslave-2.6 package will load the bonding module and use
+the ifenslave command when appropriate.
+
+Example Configurations
+----------------------
+
+In /etc/network/interfaces, the following stanza will configure bond0, in
+active-backup mode, with eth0 and eth1 as slaves.
+
+auto bond0
+iface bond0 inet dhcp
+        bond-slaves eth0 eth1
+        bond-mode active-backup
+        bond-miimon 100
+        bond-primary eth0 eth1
+
+If the above configuration doesn't work, you might have a system using
+upstart for system startup. This is most notably true for recent
+Ubuntu versions. The following stanza in /etc/network/interfaces will
+produce the same result on those systems.
+
+auto bond0
+iface bond0 inet dhcp
+        bond-slaves none
+        bond-mode active-backup
+        bond-miimon 100
+
+auto eth0
+iface eth0 inet manual
+        bond-master bond0
+        bond-primary eth0 eth1
+
+auto eth1
+iface eth1 inet manual
+        bond-master bond0
+        bond-primary eth0 eth1
+
+For a full list of bond-* supported options in /etc/network/interfaces and some
+more advanced examples tailored to you particular distros, see the files in
+/usr/share/doc/ifenslave-2.6.
+
+3.6 Overriding Configuration for Special Cases
 ----------------------------------------------
+
 When using the bonding driver, the physical port which transmits a frame is
 typically selected by the bonding driver, and is not relevant to the user or
 system administrator.  The output port is simply selected using the policies of