Merge rsync://rsync.kernel.org/pub/scm/linux/kernel/git/torvalds/linux-2.6

19 files changed, 772 insertions, 369 deletions

diff --git a/Documentation/DocBook/usb.tmpl b/Documentation/DocBook/usb.tmpl
index 15ce0f21e5e0..320af25de3a2 100644
--- a/Documentation/DocBook/usb.tmpl
+++ b/Documentation/DocBook/usb.tmpl
@@ -253,6 +253,7 @@
 !Edrivers/usb/core/urb.c
 !Edrivers/usb/core/message.c
 !Edrivers/usb/core/file.c
+!Edrivers/usb/core/driver.c
 !Edrivers/usb/core/usb.c
 !Edrivers/usb/core/hub.c
     </chapter>
diff --git a/Documentation/SubmittingPatches b/Documentation/SubmittingPatches
index 237d54c44bc5..1d47e6c09dc6 100644
--- a/Documentation/SubmittingPatches
+++ b/Documentation/SubmittingPatches
@@ -158,7 +158,7 @@ Even if the maintainer did not respond in step #4, make sure to ALWAYS
 copy the maintainer when you change their code.
 
 For small patches you may want to CC the Trivial Patch Monkey
-trivial@rustcorp.com.au set up by Rusty Russell; which collects "trivial"
+trivial@kernel.org managed by Adrian Bunk; which collects "trivial"
 patches. Trivial patches must qualify for one of the following rules:
  Spelling fixes in documentation
  Spelling fixes which could break grep(1).
@@ -171,7 +171,7 @@ patches. Trivial patches must qualify for one of the following rules:
  since people copy, as long as it's trivial)
  Any fix by the author/maintainer of the file. (ie. patch monkey
  in re-transmission mode)
-URL: <http://www.kernel.org/pub/linux/kernel/people/rusty/trivial/>
+URL: <http://www.kernel.org/pub/linux/kernel/people/bunk/trivial/>
 
 
 
diff --git a/Documentation/block/biodoc.txt b/Documentation/block/biodoc.txt
index 0fe01c805480..303c57a7fad9 100644
--- a/Documentation/block/biodoc.txt
+++ b/Documentation/block/biodoc.txt
@@ -31,7 +31,7 @@ The following people helped with review comments and inputs for this
 document:
         Christoph Hellwig <hch@infradead.org>
         Arjan van de Ven <arjanv@redhat.com>
-        Randy Dunlap <rddunlap@osdl.org>
+        Randy Dunlap <rdunlap@xenotime.net>
         Andre Hedrick <andre@linux-ide.org>
 
 The following people helped with fixes/contributions to the bio patches
diff --git a/Documentation/cpu-freq/governors.txt b/Documentation/cpu-freq/governors.txt
index 933fae74c337..f4b8dc4237e6 100644
--- a/Documentation/cpu-freq/governors.txt
+++ b/Documentation/cpu-freq/governors.txt
@@ -27,6 +27,7 @@ Contents:
 2.2  Powersave
 2.3  Userspace
 2.4  Ondemand
+2.5  Conservative
 
 3.   The Governor Interface in the CPUfreq Core
 
@@ -110,9 +111,64 @@ directory.
 
 The CPUfreq govenor "ondemand" sets the CPU depending on the
 current usage. To do this the CPU must have the capability to
-switch the frequency very fast.
-
-
+switch the frequency very quickly.  There are a number of sysfs file
+accessible parameters:
+
+sampling_rate: measured in uS (10^-6 seconds), this is how often you
+want the kernel to look at the CPU usage and to make decisions on
+what to do about the frequency.  Typically this is set to values of
+around '10000' or more.
+
+show_sampling_rate_(min|max): the minimum and maximum sampling rates
+available that you may set 'sampling_rate' to.
+
+up_threshold: defines what the average CPU usaged between the samplings
+of 'sampling_rate' needs to be for the kernel to make a decision on
+whether it should increase the frequency.  For example when it is set
+to its default value of '80' it means that between the checking
+intervals the CPU needs to be on average more than 80% in use to then
+decide that the CPU frequency needs to be increased.  
+
+sampling_down_factor: this parameter controls the rate that the CPU
+makes a decision on when to decrease the frequency.  When set to its
+default value of '5' it means that at 1/5 the sampling_rate the kernel
+makes a decision to lower the frequency.  Five "lower rate" decisions
+have to be made in a row before the CPU frequency is actually lower.
+If set to '1' then the frequency decreases as quickly as it increases,
+if set to '2' it decreases at half the rate of the increase.
+
+ignore_nice_load: this parameter takes a value of '0' or '1', when set
+to '0' (its default) then all processes are counted towards towards the
+'cpu utilisation' value.   When set to '1' then processes that are
+run with a 'nice' value will not count (and thus be ignored) in the
+overal usage calculation.  This is useful if you are running a CPU
+intensive calculation on your laptop that you do not care how long it
+takes to complete as you can 'nice' it and prevent it from taking part
+in the deciding process of whether to increase your CPU frequency.
+
+
+2.5 Conservative
+----------------
+
+The CPUfreq governor "conservative", much like the "ondemand"
+governor, sets the CPU depending on the current usage.  It differs in
+behaviour in that it gracefully increases and decreases the CPU speed
+rather than jumping to max speed the moment there is any load on the
+CPU.  This behaviour more suitable in a battery powered environment.
+The governor is tweaked in the same manner as the "ondemand" governor
+through sysfs with the addition of:
+
+freq_step: this describes what percentage steps the cpu freq should be
+increased and decreased smoothly by.  By default the cpu frequency will
+increase in 5% chunks of your maximum cpu frequency.  You can change this
+value to anywhere between 0 and 100 where '0' will effectively lock your
+CPU at a speed regardless of its load whilst '100' will, in theory, make
+it behave identically to the "ondemand" governor.
+
+down_threshold: same as the 'up_threshold' found for the "ondemand"
+governor but for the opposite direction.  For example when set to its
+default value of '20' it means that if the CPU usage needs to be below
+20% between samples to have the frequency decreased.
 
 3. The Governor Interface in the CPUfreq Core
 =============================================
diff --git a/Documentation/filesystems/00-INDEX b/Documentation/filesystems/00-INDEX
index bcfbab899b37..7e17712f3229 100644
--- a/Documentation/filesystems/00-INDEX
+++ b/Documentation/filesystems/00-INDEX
@@ -18,8 +18,6 @@ devfs/
         - directory containing devfs documentation.
 ext2.txt
         - info, mount options and specifications for the Ext2 filesystem.
-fat_cvf.txt
-        - info on the Compressed Volume Files extension to the FAT filesystem
 hpfs.txt
         - info and mount options for the OS/2 HPFS.
 isofs.txt
diff --git a/Documentation/filesystems/vfs.txt b/Documentation/filesystems/vfs.txt
index ee4c0a8b8db7..e56e842847d3 100644
--- a/Documentation/filesystems/vfs.txt
+++ b/Documentation/filesystems/vfs.txt
@@ -162,9 +162,8 @@ get_sb() method fills in is the "s_op" field. This is a pointer to
 a "struct super_operations" which describes the next level of the
 filesystem implementation.
 
-Usually, a filesystem uses generic one of the generic get_sb()
-implementations and provides a fill_super() method instead. The
-generic methods are:
+Usually, a filesystem uses one of the generic get_sb() implementations
+and provides a fill_super() method instead. The generic methods are:
 
   get_sb_bdev: mount a filesystem residing on a block device
 
diff --git a/Documentation/kbuild/modules.txt b/Documentation/kbuild/modules.txt
index c91caf7eb303..1c0db652b366 100644
--- a/Documentation/kbuild/modules.txt
+++ b/Documentation/kbuild/modules.txt
@@ -38,7 +38,7 @@ included in the kernel tree.
 What is covered within this file is mainly information to authors
 of modules. The author of an external modules should supply
 a makefile that hides most of the complexity so one only has to type
-'make' to buld the module. A complete example will be present in
+'make' to build the module. A complete example will be present in
 chapter ¤. Creating a kbuild file for an external module".
 
 
@@ -69,7 +69,7 @@ when building an external module.
 
 --- 2.2 Available targets
 
-        $KDIR refers to path to kernel source top-level directory
+        $KDIR refers to the path to the kernel source top-level directory
 
         make -C $KDIR M=`pwd`
                 Will build the module(s) located in current directory.
@@ -87,11 +87,11 @@ when building an external module.
         make -C $KDIR M=$PWD modules_install
                 Install the external module(s).
                 Installation default is in /lib/modules/<kernel-version>/extra,
-                but may be prefixed with INSTALL_MOD_PATH - see separate chater.
+                but may be prefixed with INSTALL_MOD_PATH - see separate chapter.
 
         make -C $KDIR M=$PWD clean
                 Remove all generated files for the module - the kernel
-                source directory is not moddified.
+                source directory is not modified.
 
         make -C $KDIR M=`pwd` help
                 help will list the available target when building external
@@ -99,7 +99,7 @@ when building an external module.
 
 --- 2.3 Available options:
 
-        $KDIR refer to path to kernel src
+        $KDIR refers to the path to the kernel source top-level directory
 
         make -C $KDIR
                 Used to specify where to find the kernel source.
@@ -206,11 +206,11 @@ following files:
 
                 KERNELDIR := /lib/modules/`uname -r`/build
                 all::
-                        $(MAKE) -C $KERNELDIR M=`pwd` $@
+                        $(MAKE) -C $(KERNELDIR) M=`pwd` $@
 
                 # Module specific targets
                 genbin:
-                        echo "X" > 8123_bini.o_shipped
+                        echo "X" > 8123_bin.o_shipped
 
                 endif
 
@@ -341,13 +341,13 @@ directory and therefore needs to deal with this in their kbuild file.
                 EXTRA_CFLAGS := -Iinclude
                 8123-y := 8123_if.o 8123_pci.o 8123_bin.o
 
-        Note that in the assingment there is no space between -I and the path.
-        This is a kbuild limitation and no space must be present.
+        Note that in the assignment there is no space between -I and the path.
+        This is a kbuild limitation:  there must be no space present.
 
 
 === 6. Module installation
 
-Modules which are included in the kernel is installed in the directory:
+Modules which are included in the kernel are installed in the directory:
 
         /lib/modules/$(KERNELRELEASE)/kernel
 
@@ -365,7 +365,7 @@ External modules are installed in the directory:
                 => Install dir: /frodo/lib/modules/$(KERNELRELEASE)/kernel
 
         INSTALL_MOD_PATH may be set as an ordinary shell variable or as in the
-        example above be specified on the commandline when calling make.
+        example above be specified on the command line when calling make.
         INSTALL_MOD_PATH has effect both when installing modules included in
         the kernel as well as when installing external modules.
 
@@ -384,7 +384,7 @@ External modules are installed in the directory:
 
 === 7. Module versioning
 
-Module versioning are enabled by the CONFIG_MODVERSIONS tag.
+Module versioning is enabled by the CONFIG_MODVERSIONS tag.
 
 Module versioning is used as a simple ABI consistency check. The Module
 versioning creates a CRC value of the full prototype for an exported symbol and
diff --git a/Documentation/kernel-parameters.txt b/Documentation/kernel-parameters.txt
index 5dffcfefc3c7..61a56b100c62 100644
--- a/Documentation/kernel-parameters.txt
+++ b/Documentation/kernel-parameters.txt
@@ -633,6 +633,14 @@ running once the system is up.
         inport.irq=     [HW] Inport (ATI XL and Microsoft) busmouse driver
                         Format: <irq>
 
+        combined_mode=  [HW] control which driver uses IDE ports in combined
+                        mode: legacy IDE driver, libata, or both
+                        (in the libata case, libata.atapi_enabled=1 may be
+                        useful as well).  Note that using the ide or libata
+                        options may affect your device naming (e.g. by
+                        changing hdc to sdb).
+                        Format: combined (default), ide, or libata
+
         inttest=        [IA64]
 
         io7=            [HW] IO7 for Marvel based alpha systems
diff --git a/Documentation/networking/gianfar.txt b/Documentation/networking/gianfar.txt
new file mode 100644
index 000000000000..ad474ea07d07
--- /dev/null
+++ b/Documentation/networking/gianfar.txt
@@ -0,0 +1,72 @@
+The Gianfar Ethernet Driver
+Sysfs File description
+
+Author: Andy Fleming <afleming@freescale.com>
+Updated: 2005-07-28
+
+SYSFS
+
+Several of the features of the gianfar driver are controlled
+through sysfs files.  These are:
+
+bd_stash:
+To stash RX Buffer Descriptors in the L2, echo 'on' or '1' to
+bd_stash, echo 'off' or '0' to disable
+
+rx_stash_len:
+To stash the first n bytes of the packet in L2, echo the number
+of bytes to buf_stash_len.  echo 0 to disable.
+
+WARNING: You could really screw these up if you set them too low or high!
+fifo_threshold:
+To change the number of bytes the controller needs in the
+fifo before it starts transmission, echo the number of bytes to 
+fifo_thresh.  Range should be 0-511.
+
+fifo_starve:
+When the FIFO has less than this many bytes during a transmit, it
+enters starve mode, and increases the priority of TX memory
+transactions.  To change, echo the number of bytes to
+fifo_starve.  Range should be 0-511.
+
+fifo_starve_off:
+Once in starve mode, the FIFO remains there until it has this
+many bytes.  To change, echo the number of bytes to
+fifo_starve_off.  Range should be 0-511.
+
+CHECKSUM OFFLOADING
+
+The eTSEC controller (first included in parts from late 2005 like
+the 8548) has the ability to perform TCP, UDP, and IP checksums
+in hardware.  The Linux kernel only offloads the TCP and UDP
+checksums (and always performs the pseudo header checksums), so
+the driver only supports checksumming for TCP/IP and UDP/IP
+packets.  Use ethtool to enable or disable this feature for RX
+and TX.
+
+VLAN
+
+In order to use VLAN, please consult Linux documentation on
+configuring VLANs.  The gianfar driver supports hardware insertion and
+extraction of VLAN headers, but not filtering.  Filtering will be
+done by the kernel.
+
+MULTICASTING
+
+The gianfar driver supports using the group hash table on the
+TSEC (and the extended hash table on the eTSEC) for multicast
+filtering.  On the eTSEC, the exact-match MAC registers are used
+before the hash tables.  See Linux documentation on how to join
+multicast groups.
+
+PADDING
+
+The gianfar driver supports padding received frames with 2 bytes
+to align the IP header to a 16-byte boundary, when supported by
+hardware.
+
+ETHTOOL
+
+The gianfar driver supports the use of ethtool for many
+configuration options.  You must run ethtool only on currently
+open interfaces.  See ethtool documentation for details.
diff --git a/Documentation/networking/ip-sysctl.txt b/Documentation/networking/ip-sysctl.txt
index ebc09a159f62..2b7cf19a06ad 100644
--- a/Documentation/networking/ip-sysctl.txt
+++ b/Documentation/networking/ip-sysctl.txt
@@ -46,6 +46,29 @@ ipfrag_secret_interval - INTEGER
         for the hash secret) for IP fragments.
         Default: 600
 
+ipfrag_max_dist - INTEGER
+        ipfrag_max_dist is a non-negative integer value which defines the 
+        maximum "disorder" which is allowed among fragments which share a 
+        common IP source address. Note that reordering of packets is 
+        not unusual, but if a large number of fragments arrive from a source 
+        IP address while a particular fragment queue remains incomplete, it 
+        probably indicates that one or more fragments belonging to that queue 
+        have been lost. When ipfrag_max_dist is positive, an additional check 
+        is done on fragments before they are added to a reassembly queue - if 
+        ipfrag_max_dist (or more) fragments have arrived from a particular IP 
+        address between additions to any IP fragment queue using that source 
+        address, it's presumed that one or more fragments in the queue are 
+        lost. The existing fragment queue will be dropped, and a new one 
+        started. An ipfrag_max_dist value of zero disables this check.
+
+        Using a very small value, e.g. 1 or 2, for ipfrag_max_dist can
+        result in unnecessarily dropping fragment queues when normal
+        reordering of packets occurs, which could lead to poor application 
+        performance. Using a very large value, e.g. 50000, increases the 
+        likelihood of incorrectly reassembling IP fragments that originate 
+        from different IP datagrams, which could result in data corruption.
+        Default: 64
+
 INET peer storage:
 
 inet_peer_threshold - INTEGER
diff --git a/Documentation/pcmcia/driver-changes.txt b/Documentation/pcmcia/driver-changes.txt
index 403e7b4dcdd4..97420f08c786 100644
--- a/Documentation/pcmcia/driver-changes.txt
+++ b/Documentation/pcmcia/driver-changes.txt
@@ -1,5 +1,16 @@
 This file details changes in 2.6 which affect PCMCIA card driver authors:
 
+* Unify detach and REMOVAL event code, as well as attach and INSERTION
+  code (as of 2.6.16)
+       void (*remove)          (struct pcmcia_device *dev);
+       int (*probe)            (struct pcmcia_device *dev);
+
+* Move suspend, resume and reset out of event handler (as of 2.6.16)
+       int (*suspend)          (struct pcmcia_device *dev);
+       int (*resume)           (struct pcmcia_device *dev);
+  should be initialized in struct pcmcia_driver, and handle
+  (SUSPEND == RESET_PHYSICAL) and (RESUME == CARD_RESET) events
+
 * event handler initialization in struct pcmcia_driver (as of 2.6.13)
    The event handler is notified of all events, and must be initialized
    as the event() callback in the driver's struct pcmcia_driver.
diff --git a/Documentation/powerpc/eeh-pci-error-recovery.txt b/Documentation/powerpc/eeh-pci-error-recovery.txt
index e75d7474322c..67a11a36270c 100644
--- a/Documentation/powerpc/eeh-pci-error-recovery.txt
+++ b/Documentation/powerpc/eeh-pci-error-recovery.txt
@@ -115,7 +115,7 @@ Current PPC64 Linux EEH Implementation
 At this time, a generic EEH recovery mechanism has been implemented,
 so that individual device drivers do not need to be modified to support
 EEH recovery.  This generic mechanism piggy-backs on the PCI hotplug
-infrastructure,  and percolates events up through the hotplug/udev
+infrastructure,  and percolates events up through the userspace/udev
 infrastructure.  Followiing is a detailed description of how this is
 accomplished.
 
@@ -172,7 +172,7 @@ A handler for the EEH notifier_block events is implemented in
 drivers/pci/hotplug/pSeries_pci.c, called handle_eeh_events().
 It saves the device BAR's and then calls rpaphp_unconfig_pci_adapter().
 This last call causes the device driver for the card to be stopped,
-which causes hotplug events to go out to user space. This triggers
+which causes uevents to go out to user space. This triggers
 user-space scripts that might issue commands such as "ifdown eth0"
 for ethernet cards, and so on.  This handler then sleeps for 5 seconds,
 hoping to give the user-space scripts enough time to complete.
@@ -258,29 +258,30 @@ rpa_php_unconfig_pci_adapter() {             // in rpaphp_pci.c
     calls
     pci_destroy_dev (struct pci_dev *) {
       calls
-      device_unregister (&dev->dev) {      // in /drivers/base/core.c
+      device_unregister (&dev->dev) {        // in /drivers/base/core.c
         calls
-        device_del(struct device * dev) {  // in /drivers/base/core.c
+        device_del(struct device * dev) {    // in /drivers/base/core.c
           calls
-          kobject_del() {                  //in /libs/kobject.c
+          kobject_del() {                    //in /libs/kobject.c
             calls
-            kobject_hotplug() {            // in /libs/kobject.c
+            kobject_uevent() {               // in /libs/kobject.c
               calls
-              kset_hotplug() {             // in /lib/kobject.c
+              kset_uevent() {                // in /lib/kobject.c
                 calls
-                kset->hotplug_ops->hotplug() which is really just
+                kset->uevent_ops->uevent()   // which is really just
                 a call to
-                dev_hotplug() {           // in /drivers/base/core.c
+                dev_uevent() {               // in /drivers/base/core.c
                   calls
-                  dev->bus->hotplug() which is really just a call to
-                  pci_hotplug () {      // in drivers/pci/hotplug.c
+                  dev->bus->uevent() which is really just a call to
+                  pci_uevent () {            // in drivers/pci/hotplug.c
                     which prints device name, etc....
                  }
                }
-               then kset_hotplug() calls
-                call_usermodehelper () with
-                   argv[0]=hotplug_path[] which is "/sbin/hotplug"
-             --> event to userspace,
+               then kobject_uevent() sends a netlink uevent to userspace
+               --> userspace uevent
+               (during early boot, nobody listens to netlink events and
+               kobject_uevent() executes uevent_helper[], which runs the
+               event process /sbin/hotplug)
            }
          }
          kobject_del() then calls sysfs_remove_dir(), which would
diff --git a/Documentation/scsi/ChangeLog.megaraid b/Documentation/scsi/ChangeLog.megaraid
index 5331d91432c7..09f6300eda4b 100644
--- a/Documentation/scsi/ChangeLog.megaraid
+++ b/Documentation/scsi/ChangeLog.megaraid
@@ -1,3 +1,38 @@
+Release Date    : Fri Nov 11 12:27:22 EST 2005 - Seokmann Ju <sju@lsil.com>
+Current Version : 2.20.4.7 (scsi module), 2.20.2.6 (cmm module)
+Older Version   : 2.20.4.6 (scsi module), 2.20.2.6 (cmm module)
+
+1.      Sorted out PCI IDs to remove megaraid support overlaps.
+        Based on the patch from Daniel, sorted out PCI IDs along with
+        charactor node name change from 'megadev' to 'megadev_legacy' to avoid
+        conflict.
+        ---
+        Hopefully we'll be getting the build restriction zapped much sooner, 
+        but we should also be thinking about totally removing the hardware 
+        support overlap in the megaraid drivers.
+
+        This patch pencils in a date of Feb 06 for this, and performs some 
+        printk abuse in hope that existing legacy users might pick up on what's
+        going on.
+
+        Signed-off-by: Daniel Drake <dsd@gentoo.org>
+        ---
+
+2.      Fixed a issue: megaraid always fails to reset handler.
+        ---
+        I found that the megaraid driver always fails to reset the
+        adapter with the following message:
+                megaraid: resetting the host...
+                megaraid mbox: reset sequence completed successfully
+                megaraid: fast sync command timed out
+                megaraid: reservation reset failed
+        when the "Cluster mode" of the adapter BIOS is enabled.
+        So, whenever the reset occurs, the adapter goes to
+        offline and just become unavailable.
+
+        Jun'ichi Nomura [mailto:jnomura@mtc.biglobe.ne.jp]
+        ---
+
 Release Date    : Mon Mar 07 12:27:22 EST 2005 - Seokmann Ju <sju@lsil.com>
 Current Version : 2.20.4.6 (scsi module), 2.20.2.6 (cmm module)
 Older Version   : 2.20.4.5 (scsi module), 2.20.2.5 (cmm module)
diff --git a/Documentation/scsi/scsi_mid_low_api.txt b/Documentation/scsi/scsi_mid_low_api.txt
index 66565d42288f..8bbae3e1abdf 100644
--- a/Documentation/scsi/scsi_mid_low_api.txt
+++ b/Documentation/scsi/scsi_mid_low_api.txt
@@ -150,7 +150,8 @@ scsi devices of which only the first 2 respond:
 LLD                   mid level                    LLD
 ===-------------------=========--------------------===------
 scsi_host_alloc()  -->
-scsi_add_host()  --------+
+scsi_add_host()  ---->
+scsi_scan_host()  -------+
                          |
                     slave_alloc()
                     slave_configure() -->  scsi_adjust_queue_depth()
@@ -196,7 +197,7 @@ of the issues involved. See the section on reference counting below.
 
 
 The hotplug concept may be extended to SCSI devices. Currently, when an
-HBA is added, the scsi_add_host() function causes a scan for SCSI devices
+HBA is added, the scsi_scan_host() function causes a scan for SCSI devices
 attached to the HBA's SCSI transport. On newer SCSI transports the HBA
 may become aware of a new SCSI device _after_ the scan has completed.
 An LLD can use this sequence to make the mid level aware of a SCSI device:
@@ -372,7 +373,7 @@ names all start with "scsi_".
 Summary:
    scsi_activate_tcq - turn on tag command queueing
    scsi_add_device - creates new scsi device (lu) instance
-   scsi_add_host - perform sysfs registration and SCSI bus scan.
+   scsi_add_host - perform sysfs registration and set up transport class
    scsi_adjust_queue_depth - change the queue depth on a SCSI device
    scsi_assign_lock - replace default host_lock with given lock
    scsi_bios_ptable - return copy of block device's partition table
@@ -386,6 +387,7 @@ Summary:
    scsi_remove_device - detach and remove a SCSI device
    scsi_remove_host - detach and remove all SCSI devices owned by host
    scsi_report_bus_reset - report scsi _bus_ reset observed
+   scsi_scan_host - scan SCSI bus
    scsi_track_queue_full - track successive QUEUE_FULL events 
    scsi_unblock_requests - allow further commands to be queued to given host
    scsi_unregister - [calls scsi_host_put()]
@@ -425,10 +427,10 @@ void scsi_activate_tcq(struct scsi_device *sdev, int depth)
  *      Might block: yes
  *
  *      Notes: This call is usually performed internally during a scsi
- *      bus scan when an HBA is added (i.e. scsi_add_host()). So it
+ *      bus scan when an HBA is added (i.e. scsi_scan_host()). So it
  *      should only be called if the HBA becomes aware of a new scsi
- *      device (lu) after scsi_add_host() has completed. If successful
- *      this call we lead to slave_alloc() and slave_configure() callbacks
+ *      device (lu) after scsi_scan_host() has completed. If successful
+ *      this call can lead to slave_alloc() and slave_configure() callbacks
  *      into the LLD.
  *
  *      Defined in: drivers/scsi/scsi_scan.c
@@ -439,7 +441,7 @@ struct scsi_device * scsi_add_device(struct Scsi_Host *shost,
 
 
 /**
- * scsi_add_host - perform sysfs registration and SCSI bus scan.
+ * scsi_add_host - perform sysfs registration and set up transport class
  * @shost:   pointer to scsi host instance
  * @dev:     pointer to struct device of type scsi class
  *
@@ -448,7 +450,11 @@ struct scsi_device * scsi_add_device(struct Scsi_Host *shost,
  *      Might block: no
  *
  *      Notes: Only required in "hotplug initialization model" after a
- *      successful call to scsi_host_alloc().
+ *      successful call to scsi_host_alloc().  This function does not
+ *      scan the bus; this can be done by calling scsi_scan_host() or
+ *      in some other transport-specific way.  The LLD must set up
+ *      the transport template before calling this function and may only
+ *      access the transport class data after this function has been called.
  *
  *      Defined in: drivers/scsi/hosts.c
  **/
@@ -559,7 +565,7 @@ void scsi_deactivate_tcq(struct scsi_device *sdev, int depth)
  *      area for the LLD's exclusive use.
  *      Both associated refcounting objects have their refcount set to 1.
  *      Full registration (in sysfs) and a bus scan are performed later when
- *      scsi_add_host() is called.
+ *      scsi_add_host() and scsi_scan_host() are called.
  *
  *      Defined in: drivers/scsi/hosts.c .
  **/
@@ -699,6 +705,19 @@ void scsi_report_bus_reset(struct Scsi_Host * shost, int channel)
 
 
 /**
+ * scsi_scan_host - scan SCSI bus
+ * @shost: a pointer to a scsi host instance
+ *
+ *      Might block: yes
+ *
+ *      Notes: Should be called after scsi_add_host()
+ *
+ *      Defined in: drivers/scsi/scsi_scan.c
+ **/
+void scsi_scan_host(struct Scsi_Host *shost)
+
+
+/**
  * scsi_track_queue_full - track successive QUEUE_FULL events on given
  *                      device to determine if and when there is a need
  *                      to adjust the queue depth on the device.
@@ -1433,7 +1452,7 @@ The following people have contributed to this document:
         Christoph Hellwig <hch at infradead dot org>
         Doug Ledford <dledford at redhat dot com>
         Andries Brouwer <Andries dot Brouwer at cwi dot nl>
-        Randy Dunlap <rddunlap at osdl dot org>
+        Randy Dunlap <rdunlap at xenotime dot net>
         Alan Stern <stern at rowland dot harvard dot edu>
 
 
diff --git a/Documentation/sound/alsa/ALSA-Configuration.txt b/Documentation/sound/alsa/ALSA-Configuration.txt
index 2f27f391c7cc..d2578013e829 100644
--- a/Documentation/sound/alsa/ALSA-Configuration.txt
+++ b/Documentation/sound/alsa/ALSA-Configuration.txt
@@ -105,7 +105,7 @@ Prior to version 0.9.0rc4 options had a 'snd_' prefix. This was removed.
     Each of top level sound card module takes the following options.
 
     index       - index (slot #) of sound card
-                - Values: 0 through 7 or negative
+                - Values: 0 through 31 or negative
                 - If nonnegative, assign that index number
                 - if negative, interpret as a bitmask of permissible
                   indices; the first free permitted index is assigned
@@ -134,7 +134,7 @@ Prior to version 0.9.0rc4 options had a 'snd_' prefix. This was removed.
     dma2        - second DMA # for AD1816A chip (PnP setup)
     clockfreq   - Clock frequency for AD1816A chip (default = 0, 33000Hz)
     
-    Module supports up to 8 cards, autoprobe and PnP.
+    This module supports multiple cards, autoprobe and PnP.
     
   Module snd-ad1848
   -----------------
@@ -145,9 +145,11 @@ Prior to version 0.9.0rc4 options had a 'snd_' prefix. This was removed.
     irq         - IRQ # for AD1848  chip
     dma1        - DMA # for AD1848 chip (0,1,3)
     
-    Module supports up to 8 cards. This module does not support autoprobe
+    This module supports multiple cards.  It does not support autoprobe
     thus main port must be specified!!! Other ports are optional.
     
+    The power-management is supported.
+
   Module snd-ad1889
   -----------------
 
@@ -156,7 +158,7 @@ Prior to version 0.9.0rc4 options had a 'snd_' prefix. This was removed.
     ac97_quirk  - AC'97 workaround for strange hardware
                   See the description of intel8x0 module for details.
 
-    This module supports up to 8 cards.
+    This module supports multiple cards.
 
   Module snd-ali5451
   ------------------
@@ -184,7 +186,9 @@ Prior to version 0.9.0rc4 options had a 'snd_' prefix. This was removed.
     mpu_irq     - IRQ # for MPU-401 (PnP setup)
     fm_port     - port # for OPL3 FM (PnP setup)
     
-    Module supports up to 8 cards, autoprobe and PnP.
+    This module supports multiple cards, autoprobe and PnP.
+
+    The power-management is supported.
 
   Module snd-als4000
   ------------------
@@ -194,7 +198,9 @@ Prior to version 0.9.0rc4 options had a 'snd_' prefix. This was removed.
     joystick_port - port # for legacy joystick support.
                     0 = disabled (default), 1 = auto-detect
     
-    Module supports up to 8 cards, autoprobe and PnP.
+    This module supports multiple cards, autoprobe and PnP.
+
+    The power-management is supported.
 
   Module snd-atiixp
   -----------------
@@ -213,6 +219,8 @@ Prior to version 0.9.0rc4 options had a 'snd_' prefix. This was removed.
     implementation depends on the motherboard, and you'll need to
     choose the correct one via spdif_aclink module option.
 
+    The power-management is supported.
+
   Module snd-atiixp-modem
   -----------------------
 
@@ -223,6 +231,8 @@ Prior to version 0.9.0rc4 options had a 'snd_' prefix. This was removed.
     Note: The default index value of this module is -2, i.e. the first
           slot is excluded.
 
+    The power-management is supported.
+
   Module snd-au8810, snd-au8820, snd-au8830
   -----------------------------------------
 
@@ -263,8 +273,10 @@ Prior to version 0.9.0rc4 options had a 'snd_' prefix. This was removed.
     dma1        - 1st DMA # for AZT2320 (WSS) chip (PnP setup)
     dma2        - 2nd DMA # for AZT2320 (WSS) chip (PnP setup)
     
-    Module supports up to 8 cards, PnP and autoprobe.
+    This module supports multiple cards, PnP and autoprobe.
     
+    The power-management is supported.
+
   Module snd-azt3328
   ------------------
 
@@ -272,7 +284,7 @@ Prior to version 0.9.0rc4 options had a 'snd_' prefix. This was removed.
 
     joystick    - Enable joystick (default off)
 
-    Module supports up to 8 cards.
+    This module supports multiple cards.
 
   Module snd-bt87x
   ----------------
@@ -282,7 +294,7 @@ Prior to version 0.9.0rc4 options had a 'snd_' prefix. This was removed.
     digital_rate - Override the default digital rate (Hz)
     load_all    - Load the driver even if the card model isn't known
 
-    Module supports up to 8 cards.
+    This module supports multiple cards.
 
     Note: The default index value of this module is -2, i.e. the first
           slot is excluded.
@@ -292,7 +304,7 @@ Prior to version 0.9.0rc4 options had a 'snd_' prefix. This was removed.
 
     Module for Creative Audigy LS and SB Live 24bit
 
-    Module supports up to 8 cards.
+    This module supports multiple cards.
 
 
   Module snd-cmi8330
@@ -308,7 +320,9 @@ Prior to version 0.9.0rc4 options had a 'snd_' prefix. This was removed.
     sbdma8      - 8bit DMA # for CMI8330 chip (SB16)
     sbdma16     - 16bit DMA # for CMI8330 chip (SB16)
 
-    Module supports up to 8 cards and autoprobe.
+    This module supports multiple cards and autoprobe.
+
+    The power-management is supported.
 
   Module snd-cmipci
   -----------------
@@ -321,8 +335,10 @@ Prior to version 0.9.0rc4 options had a 'snd_' prefix. This was removed.
                   (default = 1)
     joystick_port - Joystick port address (0 = disable, 1 = auto-detect)
 
-    Module supports autoprobe and multiple chips (max 8).
+    This module supports autoprobe and multiple cards.
     
+    The power-management is supported.
+
   Module snd-cs4231
   -----------------
 
@@ -335,7 +351,7 @@ Prior to version 0.9.0rc4 options had a 'snd_' prefix. This was removed.
     dma1        - first DMA # for CS4231 chip
     dma2        - second DMA # for CS4231 chip
     
-    Module supports up to 8 cards. This module does not support autoprobe
+    This module supports multiple cards. This module does not support autoprobe
     thus main port must be specified!!! Other ports are optional.
 
     The power-management is supported.
@@ -355,7 +371,7 @@ Prior to version 0.9.0rc4 options had a 'snd_' prefix. This was removed.
     dma2        - second DMA # for Yamaha CS4232 chip (0,1,3), -1 = disable
     isapnp      - ISA PnP detection - 0 = disable, 1 = enable (default)
     
-    Module supports up to 8 cards. This module does not support autoprobe
+    This module supports multiple cards. This module does not support autoprobe
     thus main port must be specified!!! Other ports are optional.
 
     The power-management is supported.
@@ -376,7 +392,7 @@ Prior to version 0.9.0rc4 options had a 'snd_' prefix. This was removed.
     dma2        - second DMA # for CS4236 chip (0,1,3), -1 = disable
     isapnp      - ISA PnP detection - 0 = disable, 1 = enable (default)
     
-    Module supports up to 8 cards. This module does not support autoprobe
+    This module supports multiple cards. This module does not support autoprobe
     (if ISA PnP is not used) thus main port and control port must be
     specified!!! Other ports are optional.
 
@@ -389,7 +405,7 @@ Prior to version 0.9.0rc4 options had a 'snd_' prefix. This was removed.
 
     dual_codec  - Secondary codec ID (0 = disable, default)
 
-    Module supports up to 8 cards.
+    This module supports multiple cards.
 
     The power-management is supported.
 
@@ -403,13 +419,20 @@ Prior to version 0.9.0rc4 options had a 'snd_' prefix. This was removed.
     thinkpad         - Force to enable Thinkpad's CLKRUN control.
     mmap_valid       - Support OSS mmap mode (default = 0).
 
-    Module supports up to 8 cards and autoprobe.
+    This module supports multiple cards and autoprobe.
     Usually external amp and CLKRUN controls are detected automatically
     from PCI sub vendor/device ids.  If they don't work, give the options
     above explicitly.
 
     The power-management is supported.
     
+  Module snd-cs5535audio
+  ----------------------
+
+    Module for multifunction CS5535 companion PCI device
+
+    This module supports multiple cards.
+
   Module snd-dt019x
   -----------------
 
@@ -423,9 +446,11 @@ Prior to version 0.9.0rc4 options had a 'snd_' prefix. This was removed.
     mpu_irq     - IRQ # for MPU-401 (PnP setup)
     dma8        - DMA # (PnP setup)
 
-    Module supports up to 8 cards.  This module is enabled only with
+    This module supports multiple cards.  This module is enabled only with
     ISA PnP support.
 
+    The power-management is supported.
+
   Module snd-dummy
   ----------------
 
@@ -433,6 +458,8 @@ Prior to version 0.9.0rc4 options had a 'snd_' prefix. This was removed.
     or input, but you may use this module for any application which
     requires a sound card (like RealPlayer).
 
+    The power-management is supported.
+
   Module snd-emu10k1
   ------------------
 
@@ -450,7 +477,7 @@ Prior to version 0.9.0rc4 options had a 'snd_' prefix. This was removed.
                        given in MB unit.  Default value is 128.
     enable_ir - enable IR
 
-    Module supports up to 8 cards and autoprobe.
+    This module supports multiple cards and autoprobe.
 
     Input & Output configurations                       [extin/extout]
         * Creative Card wo/Digital out                  [0x0003/0x1f03]
@@ -466,12 +493,14 @@ Prior to version 0.9.0rc4 options had a 'snd_' prefix. This was removed.
         * Creative Card 5.1 (c) 2003                    [0x3fc3/0x7cff]
         * Creative Card all ins and outs                [0x3fff/0x7fff]
     
+    The power-management is supported.
+
   Module snd-emu10k1x
   -------------------
 
     Module for Creative Emu10k1X (SB Live Dell OEM version)
 
-    Module supports up to 8 cards.
+    This module supports multiple cards.
 
   Module snd-ens1370
   ------------------
@@ -482,7 +511,7 @@ Prior to version 0.9.0rc4 options had a 'snd_' prefix. This was removed.
 
     joystick            - Enable joystick (default off)
 
-    Module supports up to 8 cards and autoprobe.
+    This module supports multiple cards and autoprobe.
     
   Module snd-ens1371
   ------------------
@@ -495,7 +524,7 @@ Prior to version 0.9.0rc4 options had a 'snd_' prefix. This was removed.
     joystick_port       - port # for joystick (0x200,0x208,0x210,0x218),
                           0 = disable (default), 1 = auto-detect
 
-    Module supports up to 8 cards and autoprobe.
+    This module supports multiple cards and autoprobe.
     
   Module snd-es968
   ----------------
@@ -506,8 +535,10 @@ Prior to version 0.9.0rc4 options had a 'snd_' prefix. This was removed.
     irq         - IRQ # for ES968 (SB8) chip (PnP setup)
     dma1        - DMA # for ES968 (SB8) chip (PnP setup)
     
-    Module supports up to 8 cards, PnP and autoprobe.
+    This module supports multiple cards, PnP and autoprobe.
     
+    The power-management is supported.
+
   Module snd-es1688
   -----------------
 
@@ -519,7 +550,7 @@ Prior to version 0.9.0rc4 options had a 'snd_' prefix. This was removed.
     mpu_irq     - IRQ # for MPU-401 port (5,7,9,10)
     dma8        - DMA # for ES-1688 chip (0,1,3)
 
-    Module supports up to 8 cards and autoprobe (without MPU-401 port).
+    This module supports multiple cards and autoprobe (without MPU-401 port).
 
   Module snd-es18xx
   -----------------
@@ -534,8 +565,8 @@ Prior to version 0.9.0rc4 options had a 'snd_' prefix. This was removed.
     dma2        - first DMA # for ES-18xx chip (0,1,3)
     isapnp      - ISA PnP detection - 0 = disable, 1 = enable (default)
 
-    Module supports up to 8 cards ISA PnP and autoprobe (without MPU-401 port
-    if native ISA PnP routines are not used).
+    This module supports multiple cards, ISA PnP and autoprobe (without MPU-401
+    port if native ISA PnP routines are not used).
     When dma2 is equal with dma1, the driver works as half-duplex.
 
     The power-management is supported.
@@ -545,7 +576,9 @@ Prior to version 0.9.0rc4 options had a 'snd_' prefix. This was removed.
 
     Module for sound cards based on ESS Solo-1 (ES1938,ES1946) chips.
 
-    Module supports up to 8 cards and autoprobe.
+    This module supports multiple cards and autoprobe.
+
+    The power-management is supported.
 
   Module snd-es1968
   -----------------
@@ -561,7 +594,7 @@ Prior to version 0.9.0rc4 options had a 'snd_' prefix. This was removed.
     enable_mpu          - enable MPU401 (0 = off, 1 = on, 2 = auto (default))
     joystick            - enable joystick (default off)       
 
-    Module supports up to 8 cards and autoprobe.
+    This module supports multiple cards and autoprobe.
 
     The power-management is supported.
 
@@ -577,8 +610,10 @@ Prior to version 0.9.0rc4 options had a 'snd_' prefix. This was removed.
                           - High 16-bits are video (radio) device number + 1
                           - example: 0x10002 (MediaForte 256-PCPR, device 1)
 
-    Module supports up to 8 cards and autoprobe.
+    This module supports multiple cards and autoprobe.
     
+    The power-management is supported.
+
   Module snd-gusclassic
   ---------------------
 
@@ -592,7 +627,7 @@ Prior to version 0.9.0rc4 options had a 'snd_' prefix. This was removed.
     voices      - GF1 voices limit (14-32)
     pcm_voices  - reserved PCM voices
 
-    Module supports up to 8 cards and autoprobe.
+    This module supports multiple cards and autoprobe.
 
   Module snd-gusextreme
   ---------------------
@@ -611,7 +646,7 @@ Prior to version 0.9.0rc4 options had a 'snd_' prefix. This was removed.
     voices      - GF1 voices limit (14-32)
     pcm_voices  - reserved PCM voices
 
-    Module supports up to 8 cards and autoprobe (without MPU-401 port).
+    This module supports multiple cards and autoprobe (without MPU-401 port).
 
   Module snd-gusmax
   -----------------
@@ -626,7 +661,7 @@ Prior to version 0.9.0rc4 options had a 'snd_' prefix. This was removed.
     voices      - GF1 voices limit (14-32)
     pcm_voices  - reserved PCM voices
 
-    Module supports up to 8 cards and autoprobe.
+    This module supports multiple cards and autoprobe.
     
   Module snd-hda-intel
   --------------------
@@ -688,12 +723,14 @@ Prior to version 0.9.0rc4 options had a 'snd_' prefix. This was removed.
             (Usually SD_LPLIB register is more accurate than the
             position buffer.)
 
+    The power-management is supported.
+
   Module snd-hdsp
   ---------------
 
     Module for RME Hammerfall DSP audio interface(s)
 
-    Module supports up to 8 cards.
+    This module supports multiple cards.
 
     Note: The firmware data can be automatically loaded via hotplug
           when CONFIG_FW_LOADER is set.  Otherwise, you need to load
@@ -751,7 +788,7 @@ Prior to version 0.9.0rc4 options had a 'snd_' prefix. This was removed.
     cs8427_timeout - reset timeout for the CS8427 chip (S/PDIF transciever)
                      in msec resolution, default value is 500 (0.5 sec)
 
-    Module supports up to 8 cards and autoprobe. Note: The consumer part
+    This module supports multiple cards and autoprobe. Note: The consumer part
     is not used with all Envy24 based cards (for example in the MidiMan Delta
     serie).
 
@@ -787,7 +824,7 @@ Prior to version 0.9.0rc4 options had a 'snd_' prefix. This was removed.
                   aureon71, universe, k8x800, phase22, phase28, ms300,
                   av710
 
-    Module supports up to 8 cards and autoprobe.
+    This module supports multiple cards and autoprobe.
 
     Note: The supported board is detected by reading EEPROM or PCI
           SSID (if EEPROM isn't available).  You can override the
@@ -839,6 +876,8 @@ Prior to version 0.9.0rc4 options had a 'snd_' prefix. This was removed.
     Note: The default index value of this module is -2, i.e. the first
           slot is excluded.
 
+    The power-management is supported.
+
   Module snd-interwave
   --------------------
 
@@ -855,7 +894,7 @@ Prior to version 0.9.0rc4 options had a 'snd_' prefix. This was removed.
     effect      - 1 = InterWave effects enable (default 0);
                   requires 8 voices
 
-    Module supports up to 8 cards, autoprobe and ISA PnP.
+    This module supports multiple cards, autoprobe and ISA PnP.
 
   Module snd-interwave-stb
   ------------------------
@@ -875,14 +914,14 @@ Prior to version 0.9.0rc4 options had a 'snd_' prefix. This was removed.
     effect      - 1 = InterWave effects enable (default 0);
                   requires 8 voices
 
-    Module supports up to 8 cards, autoprobe and ISA PnP.
+    This module supports multiple cards, autoprobe and ISA PnP.
 
   Module snd-korg1212
   -------------------
 
     Module for Korg 1212 IO PCI card
 
-    Module supports up to 8 cards.
+    This module supports multiple cards.
 
   Module snd-maestro3
   -------------------
@@ -894,7 +933,7 @@ Prior to version 0.9.0rc4 options had a 'snd_' prefix. This was removed.
                        -1 for default pin (8 for allegro, 1 for
                        others) 
 
-    Module supports autoprobe and multiple chips (max 8).
+    This module supports autoprobe and multiple chips.
 
     Note: the binding of amplifier is dependent on hardware.
     If there is no sound even though all channels are unmuted, try to
@@ -909,7 +948,7 @@ Prior to version 0.9.0rc4 options had a 'snd_' prefix. This was removed.
 
     Module for Digigram miXart8 sound cards.
 
-    Module supports multiple cards.
+    This module supports multiple cards.
     Note: One miXart8 board will be represented as 4 alsa cards.
           See MIXART.txt for details.
 
@@ -928,7 +967,7 @@ Prior to version 0.9.0rc4 options had a 'snd_' prefix. This was removed.
     irq         - IRQ number or -1 (disable)
     pnp         - PnP detection - 0 = disable, 1 = enable (default)
 
-    Module supports multiple devices (max 8) and PnP.
+    This module supports multiple devices and PnP.
     
   Module snd-mtpav
   ----------------
@@ -1014,7 +1053,7 @@ Prior to version 0.9.0rc4 options had a 'snd_' prefix. This was removed.
     dma2        - second DMA # for Yamaha OPL3-SA chip (0,1,3), -1 = disable
     isapnp      - ISA PnP detection - 0 = disable, 1 = enable (default)
     
-    Module supports up to 8 cards and ISA PnP. This module does not support
+    This module supports multiple cards and ISA PnP.  It does not support
     autoprobe (if ISA PnP is not used) thus all ports must be specified!!!
     
     The power-management is supported.
@@ -1064,6 +1103,13 @@ Prior to version 0.9.0rc4 options had a 'snd_' prefix. This was removed.
 
     This module supports only one card, autoprobe and PnP.
 
+  Module snd-pcxhr
+  ----------------
+
+    Module for Digigram PCXHR boards
+
+    This module supports multiple cards.
+
   Module snd-powermac (on ppc only)
   ---------------------------------
 
@@ -1084,20 +1130,22 @@ Prior to version 0.9.0rc4 options had a 'snd_' prefix. This was removed.
 
     For ARM architecture only.
 
+    The power-management is supported.
+
   Module snd-rme32
   ----------------
 
     Module for RME Digi32, Digi32 Pro and Digi32/8 (Sek'd Prodif32, 
     Prodif96 and Prodif Gold) sound cards.
 
-    Module supports up to 8 cards.
+    This module supports multiple cards.
 
   Module snd-rme96
   ----------------
 
     Module for RME Digi96, Digi96/8 and Digi96/8 PRO/PAD/PST sound cards.
 
-    Module supports up to 8 cards.
+    This module supports multiple cards.
 
   Module snd-rme9652
   ------------------
@@ -1107,7 +1155,7 @@ Prior to version 0.9.0rc4 options had a 'snd_' prefix. This was removed.
     precise_ptr - Enable precise pointer (doesn't work reliably).
                   (default = 0)
 
-    Module supports up to 8 cards.
+    This module supports multiple cards.
 
     Note: snd-page-alloc module does the job which snd-hammerfall-mem
           module did formerly.  It will allocate the buffers in advance
@@ -1124,6 +1172,8 @@ Prior to version 0.9.0rc4 options had a 'snd_' prefix. This was removed.
     Module supports only one card.
     Module has no enable and index options.
 
+    The power-management is supported.
+
   Module snd-sb8
   --------------
 
@@ -1135,8 +1185,10 @@ Prior to version 0.9.0rc4 options had a 'snd_' prefix. This was removed.
     irq         - IRQ # for SB DSP chip (5,7,9,10)
     dma8        - DMA # for SB DSP chip (1,3)
 
-    Module supports up to 8 cards and autoprobe.
+    This module supports multiple cards and autoprobe.
     
+    The power-management is supported.
+
   Module snd-sb16 and snd-sbawe
   -----------------------------
 
@@ -1155,7 +1207,7 @@ Prior to version 0.9.0rc4 options had a 'snd_' prefix. This was removed.
     csp         - ASP/CSP chip support - 0 = disable (default), 1 = enable
     isapnp      - ISA PnP detection - 0 = disable, 1 = enable (default)
     
-    Module supports up to 8 cards, autoprobe and ISA PnP.
+    This module supports multiple cards, autoprobe and ISA PnP.
 
     Note: To use Vibra16X cards in 16-bit half duplex mode, you must
           disable 16bit DMA with dma16 = -1 module parameter.
@@ -1163,6 +1215,8 @@ Prior to version 0.9.0rc4 options had a 'snd_' prefix. This was removed.
           half duplex mode through 8-bit DMA channel by disabling their
           16-bit DMA channel.
     
+    The power-management is supported.
+
   Module snd-sgalaxy
   ------------------
 
@@ -1173,7 +1227,9 @@ Prior to version 0.9.0rc4 options had a 'snd_' prefix. This was removed.
     irq         - IRQ # (7,9,10,11)
     dma1        - DMA #
 
-    Module supports up to 8 cards.
+    This module supports multiple cards.
+
+    The power-management is supported.
 
   Module snd-sscape
   -----------------
@@ -1185,7 +1241,7 @@ Prior to version 0.9.0rc4 options had a 'snd_' prefix. This was removed.
     mpu_irq     - MPU-401 IRQ # (PnP setup)
     dma         - DMA # (PnP setup)
 
-    Module supports up to 8 cards.  ISA PnP must be enabled.
+    This module supports multiple cards.  ISA PnP must be enabled.
     You need sscape_ctl tool in alsa-tools package for loading
     the microcode.
 
@@ -1194,21 +1250,21 @@ Prior to version 0.9.0rc4 options had a 'snd_' prefix. This was removed.
 
     Module for AMD7930 sound chips found on Sparcs.
 
-    Module supports up to 8 cards.
+    This module supports multiple cards.
 
   Module snd-sun-cs4231 (on sparc only)
   -------------------------------------
 
     Module for CS4231 sound chips found on Sparcs.
 
-    Module supports up to 8 cards.
+    This module supports multiple cards.
 
   Module snd-sun-dbri (on sparc only)
   -----------------------------------
 
     Module for DBRI sound chips found on Sparcs.
 
-    Module supports up to 8 cards.
+    This module supports multiple cards.
 
   Module snd-wavefront
   --------------------
@@ -1228,7 +1284,7 @@ Prior to version 0.9.0rc4 options had a 'snd_' prefix. This was removed.
     dma2            - DMA2 # for CS4232 PCM interface.
     isapnp          - ISA PnP detection - 0 = disable, 1 = enable (default)
 
-    Module supports up to 8 cards and ISA PnP.
+    This module supports multiple cards and ISA PnP.
 
   Module snd-sonicvibes
   ---------------------
@@ -1240,7 +1296,7 @@ Prior to version 0.9.0rc4 options had a 'snd_' prefix. This was removed.
                   - SoundCard must have onboard SRAM for this.
     mge       - Mic Gain Enable - 1 = enable, 0 = disable (default)
     
-    Module supports up to 8 cards and autoprobe.
+    This module supports multiple cards and autoprobe.
 
   Module snd-serial-u16550
   ------------------------
@@ -1259,7 +1315,7 @@ Prior to version 0.9.0rc4 options had a 'snd_' prefix. This was removed.
                   0 = Soundcanvas, 1 = MS-124T, 2 = MS-124W S/A,
                   3 = MS-124W M/B, 4 = Generic
     
-    Module supports up to 8 cards. This module does not support autoprobe
+    This module supports multiple cards. This module does not support autoprobe
     thus the main port must be specified!!! Other options are optional.
 
   Module snd-trident
@@ -1278,7 +1334,7 @@ Prior to version 0.9.0rc4 options had a 'snd_' prefix. This was removed.
     pcm_channels   - max channels (voices) reserved for PCM
     wavetable_size - max wavetable size in kB (4-?kb)
 
-    Module supports up to 8 cards and autoprobe.
+    This module supports multiple cards and autoprobe.
 
     The power-management is supported.
 
@@ -1290,14 +1346,14 @@ Prior to version 0.9.0rc4 options had a 'snd_' prefix. This was removed.
     vid             - Vendor ID for the device (optional)
     pid             - Product ID for the device (optional)
 
-    This module supports up to 8 cards, autoprobe and hotplugging.
+    This module supports multiple devices, autoprobe and hotplugging.
 
   Module snd-usb-usx2y
   --------------------
 
     Module for Tascam USB US-122, US-224 and US-428 devices.
 
-    This module supports up to 8 cards, autoprobe and hotplugging.
+    This module supports multiple devices, autoprobe and hotplugging.
 
     Note: you need to load the firmware via usx2yloader utility included
           in alsa-tools and alsa-firmware packages.
@@ -1356,6 +1412,8 @@ Prior to version 0.9.0rc4 options had a 'snd_' prefix. This was removed.
     Note: for the MPU401 on VIA823x, use snd-mpu401 driver
           additionally.  The mpu_port option is for VIA686 chips only.
 
+    The power-management is supported.
+
   Module snd-via82xx-modem
   ------------------------
 
@@ -1368,6 +1426,8 @@ Prior to version 0.9.0rc4 options had a 'snd_' prefix. This was removed.
     Note: The default index value of this module is -2, i.e. the first
           slot is excluded.
 
+    The power-management is supported.
+
   Module snd-virmidi
   ------------------
 
@@ -1375,9 +1435,9 @@ Prior to version 0.9.0rc4 options had a 'snd_' prefix. This was removed.
     This module creates virtual rawmidi devices which communicate
     to the corresponding ALSA sequencer ports.
 
-    midi_devs   - MIDI devices # (1-8, default=4)
+    midi_devs   - MIDI devices # (1-4, default=4)
     
-    Module supports up to 8 cards.
+    This module supports multiple cards.
 
   Module snd-vx222
   ----------------
@@ -1387,7 +1447,7 @@ Prior to version 0.9.0rc4 options had a 'snd_' prefix. This was removed.
     mic         - Enable Microphone on V222 Mic (NYI)
     ibl         - Capture IBL size. (default = 0, minimum size)
 
-    Module supports up to 8 cards.
+    This module supports multiple cards.
 
     When the driver is compiled as a module and the hotplug firmware
     is supported, the firmware data is loaded via hotplug automatically.
@@ -1406,6 +1466,8 @@ Prior to version 0.9.0rc4 options had a 'snd_' prefix. This was removed.
     size is chosen.  The possible IBL values can be found in
     /proc/asound/cardX/vx-status proc file.
 
+    The power-management is supported.
+
   Module snd-vxpocket
   -------------------
 
@@ -1413,7 +1475,7 @@ Prior to version 0.9.0rc4 options had a 'snd_' prefix. This was removed.
 
     ibl      - Capture IBL size. (default = 0, minimum size)
 
-    Module supports up to 8 cards.  The module is compiled only when
+    This module supports multiple cards.  The module is compiled only when
     PCMCIA is supported on kernel.
 
     With the older 2.6.x kernel, to activate the driver via the card
@@ -1434,6 +1496,8 @@ Prior to version 0.9.0rc4 options had a 'snd_' prefix. This was removed.
     Note2: snd-vxp440 driver is merged to snd-vxpocket driver since
            ALSA 1.0.10.
 
+    The power-management is supported.
+
   Module snd-ymfpci
   -----------------
 
@@ -1447,7 +1511,7 @@ Prior to version 0.9.0rc4 options had a 'snd_' prefix. This was removed.
                     1 (auto-detect)
     rear_switch   - enable shared rear/line-in switch (bool)
 
-    Module supports autoprobe and multiple chips (max 8).
+    This module supports autoprobe and multiple chips.
 
     The power-management is supported.
 
@@ -1458,6 +1522,8 @@ Prior to version 0.9.0rc4 options had a 'snd_' prefix. This was removed.
 
     Note: the driver is build only when CONFIG_ISA is set.
 
+    The power-management is supported.
+
 
 AC97 Quirk Option
 =================
@@ -1474,7 +1540,7 @@ the proper value with this option.
 
 The following strings are accepted:
     - default   Don't override the default setting
-    - disable   Disable the quirk
+    - none      Disable the quirk
     - hp_only   Bind Master and Headphone controls as a single control
     - swap_hp   Swap headphone and master controls
     - swap_surround  Swap master and surround controls
diff --git a/Documentation/sound/alsa/DocBook/writing-an-alsa-driver.tmpl b/Documentation/sound/alsa/DocBook/writing-an-alsa-driver.tmpl
index 260334c98d95..4963d83d1511 100644
--- a/Documentation/sound/alsa/DocBook/writing-an-alsa-driver.tmpl
+++ b/Documentation/sound/alsa/DocBook/writing-an-alsa-driver.tmpl
@@ -18,8 +18,8 @@
       </affiliation>
      </author>
 
-     <date>October 6, 2005</date>
-     <edition>0.3.5</edition>
+     <date>November 17, 2005</date>
+     <edition>0.3.6</edition>
 
     <abstract>
       <para>
@@ -403,9 +403,8 @@
   static int enable[SNDRV_CARDS] = SNDRV_DEFAULT_ENABLE_PNP;
 
   /* definition of the chip-specific record */
-  typedef struct snd_mychip mychip_t;
-  struct snd_mychip {
-          snd_card_t *card;
+  struct mychip {
+          struct snd_card *card;
           // rest of implementation will be in the section
           // "PCI Resource Managements"
   };
@@ -413,7 +412,7 @@
   /* chip-specific destructor
    * (see "PCI Resource Managements")
    */
-  static int snd_mychip_free(mychip_t *chip)
+  static int snd_mychip_free(struct mychip *chip)
   {
           .... // will be implemented later...
   }
@@ -421,22 +420,21 @@
   /* component-destructor
    * (see "Management of Cards and Components")
    */
-  static int snd_mychip_dev_free(snd_device_t *device)
+  static int snd_mychip_dev_free(struct snd_device *device)
   {
-          mychip_t *chip = device->device_data;
-          return snd_mychip_free(chip);
+          return snd_mychip_free(device->device_data);
   }
 
   /* chip-specific constructor
    * (see "Management of Cards and Components")
    */
-  static int __devinit snd_mychip_create(snd_card_t *card,
+  static int __devinit snd_mychip_create(struct snd_card *card,
                                          struct pci_dev *pci,
-                                         mychip_t **rchip)
+                                         struct mychip **rchip)
   {
-          mychip_t *chip;
+          struct mychip *chip;
           int err;
-          static snd_device_ops_t ops = {
+          static struct snd_device_ops ops = {
                  .dev_free = snd_mychip_dev_free,
           };
 
@@ -474,8 +472,8 @@
                                const struct pci_device_id *pci_id)
   {
           static int dev;
-          snd_card_t *card;
-          mychip_t *chip;
+          struct snd_card *card;
+          struct mychip *chip;
           int err;
 
           /* (1) */
@@ -582,7 +580,7 @@
           <informalexample>
             <programlisting>
 <![CDATA[
-  snd_card_t *card;
+  struct snd_card *card;
   ....
   card = snd_card_new(index[dev], id[dev], THIS_MODULE, 0);
 ]]>
@@ -605,7 +603,7 @@
           <informalexample>
             <programlisting>
 <![CDATA[
-  mychip_t *chip;
+  struct mychip *chip;
   ....
   if ((err = snd_mychip_create(card, pci, &chip)) < 0) {
           snd_card_free(card);
@@ -806,7 +804,7 @@
         <informalexample>
           <programlisting>
 <![CDATA[
-  snd_card_t *card;
+  struct snd_card *card;
   card = snd_card_new(index, id, module, extra_size);
 ]]>
           </programlisting>
@@ -830,7 +828,7 @@
       <para>
         After the card is created, you can attach the components
       (devices) to the card instance. On ALSA driver, a component is
-      represented as a <type>snd_device_t</type> object.
+      represented as a struct <structname>snd_device</structname> object.
       A component can be a PCM instance, a control interface, a raw
       MIDI interface, etc.  Each of such instances has one component
       entry.
@@ -891,14 +889,11 @@
       The chip-specific information, e.g. the i/o port address, its
       resource pointer, or the irq number, is stored in the
       chip-specific record.
-      Usually, the chip-specific record is typedef'ed as
-      <type>xxx_t</type> like the following:
 
         <informalexample>
           <programlisting>
 <![CDATA[
-  typedef struct snd_mychip mychip_t;
-  struct snd_mychip {
+  struct mychip {
           ....
   };
 ]]>
@@ -918,12 +913,12 @@
           <informalexample>
             <programlisting>
 <![CDATA[
-  card = snd_card_new(index[dev], id[dev], THIS_MODULE, sizeof(mychip_t));
+  card = snd_card_new(index[dev], id[dev], THIS_MODULE, sizeof(struct mychip));
 ]]>
             </programlisting>
           </informalexample>
 
-          whether <type>mychip_t</type> is the type of the chip record.
+          whether struct <structname>mychip</structname> is the type of the chip record.
         </para>
 
         <para>
@@ -932,7 +927,7 @@
           <informalexample>
             <programlisting>
 <![CDATA[
-  mychip_t *chip = (mychip_t *)card->private_data;
+  struct mychip *chip = (struct mychip *)card->private_data;
 ]]>
             </programlisting>
           </informalexample>
@@ -954,8 +949,8 @@
           <informalexample>
             <programlisting>
 <![CDATA[
-  snd_card_t *card;
-  mychip_t *chip;
+  struct snd_card *card;
+  struct mychip *chip;
   card = snd_card_new(index[dev], id[dev], THIS_MODULE, NULL);
   .....
   chip = kzalloc(sizeof(*chip), GFP_KERNEL);
@@ -971,8 +966,8 @@
           <informalexample>
             <programlisting>
 <![CDATA[
-  struct snd_mychip {
-          snd_card_t *card;
+  struct mychip {
+          struct snd_card *card;
           ....
   };
 ]]>
@@ -1000,7 +995,7 @@
           <informalexample>
             <programlisting>
 <![CDATA[
-  static snd_device_ops_t ops = {
+  static struct snd_device_ops ops = {
           .dev_free =        snd_mychip_dev_free,
   };
   ....
@@ -1018,10 +1013,9 @@
           <informalexample>
             <programlisting>
 <![CDATA[
-  static int snd_mychip_dev_free(snd_device_t *device)
+  static int snd_mychip_dev_free(struct snd_device *device)
   {
-          mychip_t *chip = device->device_data;
-          return snd_mychip_free(chip);
+          return snd_mychip_free(device->device_data);
   }
 ]]>
             </programlisting>
@@ -1087,15 +1081,15 @@
           <title>PCI Resource Managements Example</title>
           <programlisting>
 <![CDATA[
-  struct snd_mychip {
-          snd_card_t *card;
+  struct mychip {
+          struct snd_card *card;
           struct pci_dev *pci;
 
           unsigned long port;
           int irq;
   };
 
-  static int snd_mychip_free(mychip_t *chip)
+  static int snd_mychip_free(struct mychip *chip)
   {
           /* disable hardware here if any */
           .... // (not implemented in this document)
@@ -1113,13 +1107,13 @@
   }
 
   /* chip-specific constructor */
-  static int __devinit snd_mychip_create(snd_card_t *card,
+  static int __devinit snd_mychip_create(struct snd_card *card,
                                          struct pci_dev *pci,
-                                         mychip_t **rchip)
+                                         struct mychip **rchip)
   {
-          mychip_t *chip;
+          struct mychip *chip;
           int err;
-          static snd_device_ops_t ops = {
+          static struct snd_device_ops ops = {
                  .dev_free = snd_mychip_dev_free,
           };
 
@@ -1155,8 +1149,7 @@
           }
           chip->port = pci_resource_start(pci, 0);
           if (request_irq(pci->irq, snd_mychip_interrupt,
-                          SA_INTERRUPT|SA_SHIRQ, "My Chip",
-                          (void *)chip)) {
+                          SA_INTERRUPT|SA_SHIRQ, "My Chip", chip)) {
                   printk(KERN_ERR "cannot grab irq %d\n", pci->irq);
                   snd_mychip_free(chip);
                   return -EBUSY;
@@ -1268,14 +1261,14 @@
 
       <para>
         Now assume that this PCI device has an I/O port with 8 bytes
-        and an interrupt. Then <type>mychip_t</type> will have the
+        and an interrupt. Then struct <structname>mychip</structname> will have the
         following fields: 
 
         <informalexample>
           <programlisting>
 <![CDATA[
-  struct snd_mychip {
-          snd_card_t *card;
+  struct mychip {
+          struct snd_card *card;
 
           unsigned long port;
           int irq;
@@ -1330,8 +1323,7 @@
           <programlisting>
 <![CDATA[
   if (request_irq(pci->irq, snd_mychip_interrupt,
-                  SA_INTERRUPT|SA_SHIRQ, "My Chip",
-                  (void *)chip)) {
+                  SA_INTERRUPT|SA_SHIRQ, "My Chip", chip)) {
           printk(KERN_ERR "cannot grab irq %d\n", pci->irq);
           snd_mychip_free(chip);
           return -EBUSY;
@@ -1372,7 +1364,7 @@
   static irqreturn_t snd_mychip_interrupt(int irq, void *dev_id,
                                           struct pt_regs *regs)
   {
-          mychip_t *chip = dev_id;
+          struct mychip *chip = dev_id;
           ....
           return IRQ_HANDLED;
   }
@@ -1487,7 +1479,7 @@
         <informalexample>
           <programlisting>
 <![CDATA[
-  struct snd_mychip {
+  struct mychip {
           ....
           unsigned long iobase_phys;
           void __iomem *iobase_virt;
@@ -1517,7 +1509,7 @@
         <informalexample>
           <programlisting>
 <![CDATA[
-  static int snd_mychip_free(mychip_t *chip)
+  static int snd_mychip_free(struct mychip *chip)
   {
           ....
           if (chip->iobase_virt)
@@ -1537,7 +1529,7 @@
       <title>Registration of Device Struct</title>
       <para>
         At some point, typically after calling <function>snd_device_new()</function>,
-        you need to register the <structname>struct device</structname> of the chip
+        you need to register the struct <structname>device</structname> of the chip
         you're handling for udev and co.  ALSA provides a macro for compatibility with
         older kernels.  Simply call like the following:
         <informalexample>
@@ -1739,7 +1731,7 @@
   ....
 
   /* hardware definition */
-  static snd_pcm_hardware_t snd_mychip_playback_hw = {
+  static struct snd_pcm_hardware snd_mychip_playback_hw = {
           .info = (SNDRV_PCM_INFO_MMAP |
                    SNDRV_PCM_INFO_INTERLEAVED |
                    SNDRV_PCM_INFO_BLOCK_TRANSFER |
@@ -1758,7 +1750,7 @@
   };
 
   /* hardware definition */
-  static snd_pcm_hardware_t snd_mychip_capture_hw = {
+  static struct snd_pcm_hardware snd_mychip_capture_hw = {
           .info = (SNDRV_PCM_INFO_MMAP |
                    SNDRV_PCM_INFO_INTERLEAVED |
                    SNDRV_PCM_INFO_BLOCK_TRANSFER |
@@ -1777,10 +1769,10 @@
   };
 
   /* open callback */
-  static int snd_mychip_playback_open(snd_pcm_substream_t *substream)
+  static int snd_mychip_playback_open(struct snd_pcm_substream *substream)
   {
-          mychip_t *chip = snd_pcm_substream_chip(substream);
-          snd_pcm_runtime_t *runtime = substream->runtime;
+          struct mychip *chip = snd_pcm_substream_chip(substream);
+          struct snd_pcm_runtime *runtime = substream->runtime;
 
           runtime->hw = snd_mychip_playback_hw;
           // more hardware-initialization will be done here
@@ -1788,19 +1780,19 @@
   }
 
   /* close callback */
-  static int snd_mychip_playback_close(snd_pcm_substream_t *substream)
+  static int snd_mychip_playback_close(struct snd_pcm_substream *substream)
   {
-          mychip_t *chip = snd_pcm_substream_chip(substream);
+          struct mychip *chip = snd_pcm_substream_chip(substream);
           // the hardware-specific codes will be here
           return 0;
 
   }
 
   /* open callback */
-  static int snd_mychip_capture_open(snd_pcm_substream_t *substream)
+  static int snd_mychip_capture_open(struct snd_pcm_substream *substream)
   {
-          mychip_t *chip = snd_pcm_substream_chip(substream);
-          snd_pcm_runtime_t *runtime = substream->runtime;
+          struct mychip *chip = snd_pcm_substream_chip(substream);
+          struct snd_pcm_runtime *runtime = substream->runtime;
 
           runtime->hw = snd_mychip_capture_hw;
           // more hardware-initialization will be done here
@@ -1808,33 +1800,33 @@
   }
 
   /* close callback */
-  static int snd_mychip_capture_close(snd_pcm_substream_t *substream)
+  static int snd_mychip_capture_close(struct snd_pcm_substream *substream)
   {
-          mychip_t *chip = snd_pcm_substream_chip(substream);
+          struct mychip *chip = snd_pcm_substream_chip(substream);
           // the hardware-specific codes will be here
           return 0;
 
   }
 
   /* hw_params callback */
-  static int snd_mychip_pcm_hw_params(snd_pcm_substream_t *substream,
-                               snd_pcm_hw_params_t * hw_params)
+  static int snd_mychip_pcm_hw_params(struct snd_pcm_substream *substream,
+                               struct snd_pcm_hw_params *hw_params)
   {
           return snd_pcm_lib_malloc_pages(substream,
                                      params_buffer_bytes(hw_params));
   }
 
   /* hw_free callback */
-  static int snd_mychip_pcm_hw_free(snd_pcm_substream_t *substream)
+  static int snd_mychip_pcm_hw_free(struct snd_pcm_substream *substream)
   {
           return snd_pcm_lib_free_pages(substream);
   }
 
   /* prepare callback */
-  static int snd_mychip_pcm_prepare(snd_pcm_substream_t *substream)
+  static int snd_mychip_pcm_prepare(struct snd_pcm_substream *substream)
   {
-          mychip_t *chip = snd_pcm_substream_chip(substream);
-          snd_pcm_runtime_t *runtime = substream->runtime;
+          struct mychip *chip = snd_pcm_substream_chip(substream);
+          struct snd_pcm_runtime *runtime = substream->runtime;
 
           /* set up the hardware with the current configuration
            * for example...
@@ -1849,7 +1841,7 @@
   }
 
   /* trigger callback */
-  static int snd_mychip_pcm_trigger(snd_pcm_substream_t *substream,
+  static int snd_mychip_pcm_trigger(struct snd_pcm_substream *substream,
                                     int cmd)
   {
           switch (cmd) {
@@ -1866,9 +1858,9 @@
 
   /* pointer callback */
   static snd_pcm_uframes_t
-  snd_mychip_pcm_pointer(snd_pcm_substream_t *substream)
+  snd_mychip_pcm_pointer(struct snd_pcm_substream *substream)
   {
-          mychip_t *chip = snd_pcm_substream_chip(substream);
+          struct mychip *chip = snd_pcm_substream_chip(substream);
           unsigned int current_ptr;
 
           /* get the current hardware pointer */
@@ -1877,7 +1869,7 @@
   }
 
   /* operators */
-  static snd_pcm_ops_t snd_mychip_playback_ops = {
+  static struct snd_pcm_ops snd_mychip_playback_ops = {
           .open =        snd_mychip_playback_open,
           .close =       snd_mychip_playback_close,
           .ioctl =       snd_pcm_lib_ioctl,
@@ -1889,7 +1881,7 @@
   };
 
   /* operators */
-  static snd_pcm_ops_t snd_mychip_capture_ops = {
+  static struct snd_pcm_ops snd_mychip_capture_ops = {
           .open =        snd_mychip_capture_open,
           .close =       snd_mychip_capture_close,
           .ioctl =       snd_pcm_lib_ioctl,
@@ -1905,9 +1897,9 @@
    */
 
   /* create a pcm device */
-  static int __devinit snd_mychip_new_pcm(mychip_t *chip)
+  static int __devinit snd_mychip_new_pcm(struct mychip *chip)
   {
-          snd_pcm_t *pcm;
+          struct snd_pcm *pcm;
           int err;
 
           if ((err = snd_pcm_new(chip->card, "My Chip", 0, 1, 1,
@@ -1944,9 +1936,9 @@
         <informalexample>
           <programlisting>
 <![CDATA[
-  static int __devinit snd_mychip_new_pcm(mychip_t *chip)
+  static int __devinit snd_mychip_new_pcm(struct mychip *chip)
   {
-          snd_pcm_t *pcm;
+          struct snd_pcm *pcm;
           int err;
 
           if ((err = snd_pcm_new(chip->card, "My Chip", 0, 1, 1,
@@ -1989,13 +1981,13 @@
       specify more numbers, but they must be handled properly in
       open/close, etc. callbacks.  When you need to know which
       substream you are referring to, then it can be obtained from
-      <type>snd_pcm_substream_t</type> data passed to each callback
+      struct <structname>snd_pcm_substream</structname> data passed to each callback
       as follows: 
 
         <informalexample>
           <programlisting>
 <![CDATA[
-  snd_pcm_substream_t *substream;
+  struct snd_pcm_substream *substream;
   int index = substream->number;
 ]]>
           </programlisting>
@@ -2024,7 +2016,7 @@
         <informalexample>
           <programlisting>
 <![CDATA[
-  static snd_pcm_ops_t snd_mychip_playback_ops = {
+  static struct snd_pcm_ops snd_mychip_playback_ops = {
           .open =        snd_mychip_pcm_open,
           .close =       snd_mychip_pcm_close,
           .ioctl =       snd_pcm_lib_ioctl,
@@ -2102,18 +2094,18 @@
           <title>PCM Instance with a Destructor</title>
           <programlisting>
 <![CDATA[
-  static void mychip_pcm_free(snd_pcm_t *pcm)
+  static void mychip_pcm_free(struct snd_pcm *pcm)
   {
-          mychip_t *chip = snd_pcm_chip(pcm);
+          struct mychip *chip = snd_pcm_chip(pcm);
           /* free your own data */
           kfree(chip->my_private_pcm_data);
           // do what you like else
           ....
   }
 
-  static int __devinit snd_mychip_new_pcm(mychip_t *chip)
+  static int __devinit snd_mychip_new_pcm(struct mychip *chip)
   {
-          snd_pcm_t *pcm;
+          struct snd_pcm *pcm;
           ....
           /* allocate your own data */
           chip->my_private_pcm_data = kmalloc(...);
@@ -2149,7 +2141,7 @@
 <![CDATA[
 struct _snd_pcm_runtime {
         /* -- Status -- */
-        snd_pcm_substream_t *trigger_master;
+        struct snd_pcm_substream *trigger_master;
         snd_timestamp_t trigger_tstamp; /* trigger timestamp */
         int overrange;
         snd_pcm_uframes_t avail_max;
@@ -2192,8 +2184,8 @@ struct _snd_pcm_runtime {
         snd_pcm_sync_id_t sync;         /* hardware synchronization ID */
 
         /* -- mmap -- */
-        volatile snd_pcm_mmap_status_t *status;
-        volatile snd_pcm_mmap_control_t *control;
+        volatile struct snd_pcm_mmap_status *status;
+        volatile struct snd_pcm_mmap_control *control;
         atomic_t mmap_count;
 
         /* -- locking / scheduling -- */
@@ -2204,15 +2196,15 @@ struct _snd_pcm_runtime {
 
         /* -- private section -- */
         void *private_data;
-        void (*private_free)(snd_pcm_runtime_t *runtime);
+        void (*private_free)(struct snd_pcm_runtime *runtime);
 
         /* -- hardware description -- */
-        snd_pcm_hardware_t hw;
-        snd_pcm_hw_constraints_t hw_constraints;
+        struct snd_pcm_hardware hw;
+        struct snd_pcm_hw_constraints hw_constraints;
 
         /* -- interrupt callbacks -- */
-        void (*transfer_ack_begin)(snd_pcm_substream_t *substream);
-        void (*transfer_ack_end)(snd_pcm_substream_t *substream);
+        void (*transfer_ack_begin)(struct snd_pcm_substream *substream);
+        void (*transfer_ack_end)(struct snd_pcm_substream *substream);
 
         /* -- timer -- */
         unsigned int timer_resolution;  /* timer resolution */
@@ -2226,7 +2218,7 @@ struct _snd_pcm_runtime {
 
 #if defined(CONFIG_SND_PCM_OSS) || defined(CONFIG_SND_PCM_OSS_MODULE)
         /* -- OSS things -- */
-        snd_pcm_oss_runtime_t oss;
+        struct snd_pcm_oss_runtime oss;
 #endif
 };
 ]]>
@@ -2252,7 +2244,7 @@ struct _snd_pcm_runtime {
         <section id="pcm-interface-runtime-hw">
         <title>Hardware Description</title>
         <para>
-          The hardware descriptor (<type>snd_pcm_hardware_t</type>)
+          The hardware descriptor (struct <structname>snd_pcm_hardware</structname>)
         contains the definitions of the fundamental hardware
         configuration.  Above all, you'll need to define this in
         <link linkend="pcm-interface-operators-open-callback"><citetitle>
@@ -2267,7 +2259,7 @@ struct _snd_pcm_runtime {
           <informalexample>
             <programlisting>
 <![CDATA[
-          snd_pcm_runtime_t *runtime = substream->runtime;
+          struct snd_pcm_runtime *runtime = substream->runtime;
           ...
           runtime->hw = snd_mychip_playback_hw; /* common definition */
           if (chip->model == VERY_OLD_ONE)
@@ -2282,7 +2274,7 @@ struct _snd_pcm_runtime {
           <informalexample>
             <programlisting>
 <![CDATA[
-  static snd_pcm_hardware_t snd_mychip_playback_hw = {
+  static struct snd_pcm_hardware snd_mychip_playback_hw = {
           .info = (SNDRV_PCM_INFO_MMAP |
                    SNDRV_PCM_INFO_INTERLEAVED |
                    SNDRV_PCM_INFO_BLOCK_TRANSFER |
@@ -2337,9 +2329,14 @@ struct _snd_pcm_runtime {
         <constant>PAUSE</constant> bit means that the pcm supports the
         <quote>pause</quote> operation, while the
         <constant>RESUME</constant> bit means that the pcm supports
-        the <quote>suspend/resume</quote> operation. If these flags
-        are set, the <structfield>trigger</structfield> callback below
-        must handle the corresponding commands. 
+        the full <quote>suspend/resume</quote> operation.
+        If <constant>PAUSE</constant> flag is set,
+        the <structfield>trigger</structfield> callback below
+        must handle the corresponding (pause push/release) commands.
+        The suspend/resume trigger commands can be defined even without
+        <constant>RESUME</constant> flag.  See <link
+        linkend="power-management"><citetitle>
+        Power Management</citetitle></link> section for details.
         </para>
 
         <para>
@@ -2512,7 +2509,7 @@ struct _snd_pcm_runtime {
         <title>Running Status</title>
         <para>
         The running status can be referred via <constant>runtime-&gt;status</constant>.
-        This is the pointer to <type>snd_pcm_mmap_status_t</type>
+        This is the pointer to struct <structname>snd_pcm_mmap_status</structname>
         record.  For example, you can get the current DMA hardware
         pointer via <constant>runtime-&gt;status-&gt;hw_ptr</constant>.
         </para>
@@ -2520,7 +2517,7 @@ struct _snd_pcm_runtime {
         <para>
         The DMA application pointer can be referred via
         <constant>runtime-&gt;control</constant>, which points
-        <type>snd_pcm_mmap_control_t</type> record.
+        struct <structname>snd_pcm_mmap_control</structname> record.
         However, accessing directly to this value is not recommended.
         </para>
         </section>
@@ -2542,9 +2539,9 @@ struct _snd_pcm_runtime {
           <informalexample>
             <programlisting>
 <![CDATA[
-  static int snd_xxx_open(snd_pcm_substream_t *substream)
+  static int snd_xxx_open(struct snd_pcm_substream *substream)
   {
-          my_pcm_data_t *data;
+          struct my_pcm_data *data;
           ....
           data = kmalloc(sizeof(*data), GFP_KERNEL);
           substream->runtime->private_data = data;
@@ -2586,7 +2583,7 @@ struct _snd_pcm_runtime {
 
       <para>
         The callback function takes at least the argument with
-        <type>snd_pcm_substream_t</type> pointer. For retrieving the
+        <structname>snd_pcm_substream</structname> pointer. For retrieving the
         chip record from the given substream instance, you can use the
         following macro. 
 
@@ -2594,7 +2591,7 @@ struct _snd_pcm_runtime {
           <programlisting>
 <![CDATA[
   int xxx() {
-          mychip_t *chip = snd_pcm_substream_chip(substream);
+          struct mychip *chip = snd_pcm_substream_chip(substream);
           ....
   }
 ]]>
@@ -2616,7 +2613,7 @@ struct _snd_pcm_runtime {
           <informalexample>
             <programlisting>
 <![CDATA[
-  static int snd_xxx_open(snd_pcm_substream_t *substream);
+  static int snd_xxx_open(struct snd_pcm_substream *substream);
 ]]>
             </programlisting>
           </informalexample>
@@ -2631,10 +2628,10 @@ struct _snd_pcm_runtime {
           <informalexample>
             <programlisting>
 <![CDATA[
-  static int snd_xxx_open(snd_pcm_substream_t *substream)
+  static int snd_xxx_open(struct snd_pcm_substream *substream)
   {
-          mychip_t *chip = snd_pcm_substream_chip(substream);
-          snd_pcm_runtime_t *runtime = substream->runtime;
+          struct mychip *chip = snd_pcm_substream_chip(substream);
+          struct snd_pcm_runtime *runtime = substream->runtime;
 
           runtime->hw = snd_mychip_playback_hw;
           return 0;
@@ -2667,7 +2664,7 @@ struct _snd_pcm_runtime {
           <informalexample>
             <programlisting>
 <![CDATA[
-  static int snd_xxx_close(snd_pcm_substream_t *substream);
+  static int snd_xxx_close(struct snd_pcm_substream *substream);
 ]]>
             </programlisting>
           </informalexample>
@@ -2682,7 +2679,7 @@ struct _snd_pcm_runtime {
           <informalexample>
             <programlisting>
 <![CDATA[
-  static int snd_xxx_close(snd_pcm_substream_t *substream)
+  static int snd_xxx_close(struct snd_pcm_substream *substream)
   {
           ....
           kfree(substream->runtime->private_data);
@@ -2709,8 +2706,8 @@ struct _snd_pcm_runtime {
           <informalexample>
             <programlisting>
 <![CDATA[
-  static int snd_xxx_hw_params(snd_pcm_substream_t * substream,
-                               snd_pcm_hw_params_t * hw_params);
+  static int snd_xxx_hw_params(struct snd_pcm_substream *substream,
+                               struct snd_pcm_hw_params *hw_params);
 ]]>
             </programlisting>
           </informalexample>
@@ -2785,7 +2782,7 @@ struct _snd_pcm_runtime {
           <informalexample>
             <programlisting>
 <![CDATA[
-  static int snd_xxx_hw_free(snd_pcm_substream_t * substream);
+  static int snd_xxx_hw_free(struct snd_pcm_substream *substream);
 ]]>
             </programlisting>
           </informalexample>
@@ -2820,7 +2817,7 @@ struct _snd_pcm_runtime {
           <informalexample>
             <programlisting>
 <![CDATA[
-  static int snd_xxx_prepare(snd_pcm_substream_t * substream);
+  static int snd_xxx_prepare(struct snd_pcm_substream *substream);
 ]]>
             </programlisting>
           </informalexample>
@@ -2869,7 +2866,7 @@ struct _snd_pcm_runtime {
           <informalexample>
             <programlisting>
 <![CDATA[
-  static int snd_xxx_trigger(snd_pcm_substream_t * substream, int cmd);
+  static int snd_xxx_trigger(struct snd_pcm_substream *substream, int cmd);
 ]]>
             </programlisting>
           </informalexample>
@@ -2911,8 +2908,8 @@ struct _snd_pcm_runtime {
         </para>
 
         <para>
-          When the pcm supports the suspend/resume operation
-        (i.e. <constant>SNDRV_PCM_INFO_RESUME</constant> flag is set),
+          When the pcm supports the suspend/resume operation,
+        regardless of full or partial suspend/resume support,
         <constant>SUSPEND</constant> and <constant>RESUME</constant>
         commands must be handled, too.
         These commands are issued when the power-management status is
@@ -2921,6 +2918,8 @@ struct _snd_pcm_runtime {
         do suspend and resume of the pcm substream, and usually, they
         are identical with <constant>STOP</constant> and
         <constant>START</constant> commands, respectively.
+          See <link linkend="power-management"><citetitle>
+        Power Management</citetitle></link> section for details.
         </para>
 
         <para>
@@ -2939,7 +2938,7 @@ struct _snd_pcm_runtime {
           <informalexample>
             <programlisting>
 <![CDATA[
-  static snd_pcm_uframes_t snd_xxx_pointer(snd_pcm_substream_t * substream)
+  static snd_pcm_uframes_t snd_xxx_pointer(struct snd_pcm_substream *substream)
 ]]>
             </programlisting>
           </informalexample>
@@ -3067,7 +3066,7 @@ struct _snd_pcm_runtime {
   static irqreturn_t snd_mychip_interrupt(int irq, void *dev_id,
                                           struct pt_regs *regs)
   {
-          mychip_t *chip = dev_id;
+          struct mychip *chip = dev_id;
           spin_lock(&chip->lock);
           ....
           if (pcm_irq_invoked(chip)) {
@@ -3111,7 +3110,7 @@ struct _snd_pcm_runtime {
   static irqreturn_t snd_mychip_interrupt(int irq, void *dev_id,
                                           struct pt_regs *regs)
   {
-          mychip_t *chip = dev_id;
+          struct mychip *chip = dev_id;
           spin_lock(&chip->lock);
           ....
           if (pcm_irq_invoked(chip)) {
@@ -3221,13 +3220,13 @@ struct _snd_pcm_runtime {
 <![CDATA[
   static unsigned int rates[] =
           {4000, 10000, 22050, 44100};
-  static snd_pcm_hw_constraint_list_t constraints_rates = {
+  static struct snd_pcm_hw_constraint_list constraints_rates = {
           .count = ARRAY_SIZE(rates),
           .list = rates,
           .mask = 0,
   };
 
-  static int snd_mychip_pcm_open(snd_pcm_substream_t *substream)
+  static int snd_mychip_pcm_open(struct snd_pcm_substream *substream)
   {
           int err;
           ....
@@ -3249,19 +3248,20 @@ struct _snd_pcm_runtime {
         You can even define your own constraint rules.
         For example, let's suppose my_chip can manage a substream of 1 channel
         if and only if the format is S16_LE, otherwise it supports any format
-        specified in the <type>snd_pcm_hardware_t</type> stucture (or in any
+        specified in the <structname>snd_pcm_hardware</structname> stucture (or in any
         other constraint_list). You can build a rule like this:
 
         <example>
           <title>Example of Hardware Constraints for Channels</title>
           <programlisting>
 <![CDATA[
-  static int hw_rule_format_by_channels(snd_pcm_hw_params_t *params,
-                                        snd_pcm_hw_rule_t *rule)
+  static int hw_rule_format_by_channels(struct snd_pcm_hw_params *params,
+                                        struct snd_pcm_hw_rule *rule)
   {
-          snd_interval_t *c = hw_param_interval(params, SNDRV_PCM_HW_PARAM_CHANNELS);
-          snd_mask_t *f = hw_param_mask(params, SNDRV_PCM_HW_PARAM_FORMAT);
-          snd_mask_t fmt;
+          struct snd_interval *c = hw_param_interval(params,
+                SNDRV_PCM_HW_PARAM_CHANNELS);
+          struct snd_mask *f = hw_param_mask(params, SNDRV_PCM_HW_PARAM_FORMAT);
+          struct snd_mask fmt;
 
           snd_mask_any(&fmt);    /* Init the struct */
           if (c->min < 2) {
@@ -3298,12 +3298,13 @@ struct _snd_pcm_runtime {
          <title>Example of Hardware Constraints for Channels</title>
          <programlisting>
 <![CDATA[
-  static int hw_rule_channels_by_format(snd_pcm_hw_params_t *params,
-                                        snd_pcm_hw_rule_t *rule)
+  static int hw_rule_channels_by_format(struct snd_pcm_hw_params *params,
+                                        struct snd_pcm_hw_rule *rule)
   {
-          snd_interval_t *c = hw_param_interval(params, SNDRV_PCM_HW_PARAM_CHANNELS);
-          snd_mask_t *f = hw_param_mask(params, SNDRV_PCM_HW_PARAM_FORMAT);
-          snd_interval_t ch;
+          struct snd_interval *c = hw_param_interval(params,
+                        SNDRV_PCM_HW_PARAM_CHANNELS);
+          struct snd_mask *f = hw_param_mask(params, SNDRV_PCM_HW_PARAM_FORMAT);
+          struct snd_interval ch;
 
           snd_interval_any(&ch);
           if (f->bits[0] == SNDRV_PCM_FMTBIT_S16_LE) {
@@ -3376,13 +3377,13 @@ struct _snd_pcm_runtime {
       callbacks: <structfield>info</structfield>,
       <structfield>get</structfield> and
       <structfield>put</structfield>. Then, define a
-      <type>snd_kcontrol_new_t</type> record, such as: 
+      struct <structname>snd_kcontrol_new</structname> record, such as: 
 
         <example>
           <title>Definition of a Control</title>
           <programlisting>
 <![CDATA[
-  static snd_kcontrol_new_t my_control __devinitdata = {
+  static struct snd_kcontrol_new my_control __devinitdata = {
           .iface = SNDRV_CTL_ELEM_IFACE_MIXER,
           .name = "PCM Playback Switch",
           .index = 0,
@@ -3599,7 +3600,7 @@ struct _snd_pcm_runtime {
         <para>
           The <structfield>info</structfield> callback is used to get
         the detailed information of this control. This must store the
-        values of the given <type>snd_ctl_elem_info_t</type>
+        values of the given struct <structname>snd_ctl_elem_info</structname>
         object. For example, for a boolean control with a single
         element will be: 
 
@@ -3607,8 +3608,8 @@ struct _snd_pcm_runtime {
             <title>Example of info callback</title>
             <programlisting>
 <![CDATA[
-  static int snd_myctl_info(snd_kcontrol_t *kcontrol,
-                          snd_ctl_elem_info_t *uinfo)
+  static int snd_myctl_info(struct snd_kcontrol *kcontrol,
+                          struct snd_ctl_elem_info *uinfo)
   {
           uinfo->type = SNDRV_CTL_ELEM_TYPE_BOOLEAN;
           uinfo->count = 1;
@@ -3642,8 +3643,8 @@ struct _snd_pcm_runtime {
           <informalexample>
             <programlisting>
 <![CDATA[
-  static int snd_myctl_info(snd_kcontrol_t *kcontrol,
-                          snd_ctl_elem_info_t *uinfo)
+  static int snd_myctl_info(struct snd_kcontrol *kcontrol,
+                          struct snd_ctl_elem_info *uinfo)
   {
           static char *texts[4] = {
                   "First", "Second", "Third", "Fourth"
@@ -3678,10 +3679,10 @@ struct _snd_pcm_runtime {
             <title>Example of get callback</title>
             <programlisting>
 <![CDATA[
-  static int snd_myctl_get(snd_kcontrol_t *kcontrol,
-                           snd_ctl_elem_value_t *ucontrol)
+  static int snd_myctl_get(struct snd_kcontrol *kcontrol,
+                           struct snd_ctl_elem_value *ucontrol)
   {
-          mychip_t *chip = snd_kcontrol_chip(kcontrol);
+          struct mychip *chip = snd_kcontrol_chip(kcontrol);
           ucontrol->value.integer.value[0] = get_some_value(chip);
           return 0;
   }
@@ -3717,8 +3718,8 @@ struct _snd_pcm_runtime {
           <informalexample>
             <programlisting>
 <![CDATA[
-  static int snd_sbmixer_get_single(snd_kcontrol_t *kcontrol,
-                                    snd_ctl_elem_value_t *ucontrol)
+  static int snd_sbmixer_get_single(struct snd_kcontrol *kcontrol,
+                                    struct snd_ctl_elem_value *ucontrol)
   {
           int reg = kcontrol->private_value & 0xff;
           int shift = (kcontrol->private_value >> 16) & 0xff;
@@ -3754,10 +3755,10 @@ struct _snd_pcm_runtime {
             <title>Example of put callback</title>
             <programlisting>
 <![CDATA[
-  static int snd_myctl_put(snd_kcontrol_t *kcontrol,
-                           snd_ctl_elem_value_t *ucontrol)
+  static int snd_myctl_put(struct snd_kcontrol *kcontrol,
+                           struct snd_ctl_elem_value *ucontrol)
   {
-          mychip_t *chip = snd_kcontrol_chip(kcontrol);
+          struct mychip *chip = snd_kcontrol_chip(kcontrol);
           int changed = 0;
           if (chip->current_value !=
                ucontrol->value.integer.value[0]) {
@@ -3814,7 +3815,7 @@ struct _snd_pcm_runtime {
         </informalexample>
 
         where <parameter>my_control</parameter> is the
-      <type>snd_kcontrol_new_t</type> object defined above, and chip
+      struct <structname>snd_kcontrol_new</structname> object defined above, and chip
       is the object pointer to be passed to
       kcontrol-&gt;private_data 
       which can be referred in callbacks. 
@@ -3822,7 +3823,7 @@ struct _snd_pcm_runtime {
 
       <para>
         <function>snd_ctl_new1()</function> allocates a new
-      <type>snd_kcontrol_t</type> instance (that's why the definition
+      <structname>snd_kcontrol</structname> instance (that's why the definition
       of <parameter>my_control</parameter> can be with
       <parameter>__devinitdata</parameter> 
       prefix), and <function>snd_ctl_add</function> assigns the given
@@ -3849,7 +3850,7 @@ struct _snd_pcm_runtime {
       control id pointer for the notification. The event-mask
       specifies the types of notification, for example, in the above
       example, the change of control values is notified.
-      The id pointer is the pointer of <type>snd_ctl_elem_id_t</type>
+      The id pointer is the pointer of struct <structname>snd_ctl_elem_id</structname>
       to be notified.
       You can find some examples in <filename>es1938.c</filename> or
       <filename>es1968.c</filename> for hardware volume interrupts. 
@@ -3882,35 +3883,35 @@ struct _snd_pcm_runtime {
             <title>Example of AC97 Interface</title>
             <programlisting>
 <![CDATA[
-  struct snd_mychip {
+  struct mychip {
           ....
-          ac97_t *ac97;
+          struct snd_ac97 *ac97;
           ....
   };
 
-  static unsigned short snd_mychip_ac97_read(ac97_t *ac97,
+  static unsigned short snd_mychip_ac97_read(struct snd_ac97 *ac97,
                                              unsigned short reg)
   {
-          mychip_t *chip = ac97->private_data;
+          struct mychip *chip = ac97->private_data;
           ....
           // read a register value here from the codec
           return the_register_value;
   }
 
-  static void snd_mychip_ac97_write(ac97_t *ac97,
+  static void snd_mychip_ac97_write(struct snd_ac97 *ac97,
                                    unsigned short reg, unsigned short val)
   {
-          mychip_t *chip = ac97->private_data;
+          struct mychip *chip = ac97->private_data;
           ....
           // write the given register value to the codec
   }
 
-  static int snd_mychip_ac97(mychip_t *chip)
+  static int snd_mychip_ac97(struct mychip *chip)
   {
-          ac97_bus_t *bus;
-          ac97_template_t ac97;
+          struct snd_ac97_bus *bus;
+          struct snd_ac97_template ac97;
           int err;
-          static ac97_bus_ops_t ops = {
+          static struct snd_ac97_bus_ops ops = {
                   .write = snd_mychip_ac97_write,
                   .read = snd_mychip_ac97_read,
           };
@@ -3937,8 +3938,8 @@ struct _snd_pcm_runtime {
         <informalexample>
           <programlisting>
 <![CDATA[
-  ac97_bus_t *bus;
-  static ac97_bus_ops_t ops = {
+  struct snd_ac97_bus *bus;
+  static struct snd_ac97_bus_ops ops = {
         .write = snd_mychip_ac97_write,
         .read = snd_mychip_ac97_read,
   };
@@ -3952,13 +3953,14 @@ struct _snd_pcm_runtime {
       </para>
 
       <para>
-      And then call <function>snd_ac97_mixer()</function> with an <type>ac97_template_t</type>
+      And then call <function>snd_ac97_mixer()</function> with an
+      struct <structname>snd_ac97_template</structname>
       record together with the bus pointer created above.
 
         <informalexample>
           <programlisting>
 <![CDATA[
-  ac97_template_t ac97;
+  struct snd_ac97_template ac97;
   int err;
 
   memset(&ac97, 0, sizeof(ac97));
@@ -3995,10 +3997,10 @@ struct _snd_pcm_runtime {
         <informalexample>
           <programlisting>
 <![CDATA[
-  static unsigned short snd_mychip_ac97_read(ac97_t *ac97,
+  static unsigned short snd_mychip_ac97_read(struct snd_ac97 *ac97,
                                              unsigned short reg)
   {
-          mychip_t *chip = ac97->private_data;
+          struct mychip *chip = ac97->private_data;
           ....
           return the_register_value;
   }
@@ -4016,7 +4018,7 @@ struct _snd_pcm_runtime {
         <informalexample>
           <programlisting>
 <![CDATA[
-  static void snd_mychip_ac97_write(ac97_t *ac97,
+  static void snd_mychip_ac97_write(struct snd_ac97 *ac97,
                        unsigned short reg, unsigned short val)
 ]]>
           </programlisting>
@@ -4163,7 +4165,7 @@ struct _snd_pcm_runtime {
       <title>Multiple Codecs</title>
       <para>
         When there are several codecs on the same card, you need to
-      call <function>snd_ac97_new()</function> multiple times with
+      call <function>snd_ac97_mixer()</function> multiple times with
       ac97.num=1 or greater. The <structfield>num</structfield> field
       specifies the codec 
       number. 
@@ -4212,7 +4214,7 @@ struct _snd_pcm_runtime {
         <informalexample>
           <programlisting>
 <![CDATA[
-  snd_rawmidi_t *rmidi;
+  struct snd_rawmidi *rmidi;
   snd_mpu401_uart_new(card, 0, MPU401_HW_MPU401, port, integrated,
                       irq, irq_flags, &rmidi);
 ]]>
@@ -4253,17 +4255,17 @@ struct _snd_pcm_runtime {
         Usually, the port address corresponds to the command port and
         port + 1 corresponds to the data port. If not, you may change
         the <structfield>cport</structfield> field of
-        <type>mpu401_t</type> manually 
-        afterward. However, <type>mpu401_t</type> pointer is not
+        struct <structname>snd_mpu401</structname> manually 
+        afterward. However, <structname>snd_mpu401</structname> pointer is not
         returned explicitly by
         <function>snd_mpu401_uart_new()</function>. You need to cast
         rmidi-&gt;private_data to
-        <type>mpu401_t</type> explicitly, 
+        <structname>snd_mpu401</structname> explicitly, 
 
         <informalexample>
           <programlisting>
 <![CDATA[
-  mpu401_t *mpu;
+  struct snd_mpu401 *mpu;
   mpu = rmidi->private_data;
 ]]>
           </programlisting>
@@ -4359,7 +4361,7 @@ struct _snd_pcm_runtime {
         <informalexample>
           <programlisting>
 <![CDATA[
-  snd_rawmidi_t *rmidi;
+  struct snd_rawmidi *rmidi;
   err = snd_rawmidi_new(chip->card, "MyMIDI", 0, outs, ins, &rmidi);
   if (err < 0)
           return err;
@@ -4419,7 +4421,7 @@ struct _snd_pcm_runtime {
         <informalexample>
           <programlisting>
 <![CDATA[
-  static snd_rawmidi_ops_t snd_mymidi_output_ops = {
+  static struct snd_rawmidi_ops snd_mymidi_output_ops = {
           .open =    snd_mymidi_output_open,
           .close =   snd_mymidi_output_close,
           .trigger = snd_mymidi_output_trigger,
@@ -4439,9 +4441,9 @@ struct _snd_pcm_runtime {
           <programlisting>
 <![CDATA[
   struct list_head *list;
-  snd_rawmidi_substream_t *substream;
+  struct snd_rawmidi_substream *substream;
   list_for_each(list, &rmidi->streams[SNDRV_RAWMIDI_STREAM_OUTPUT].substreams) {
-          substream = list_entry(list, snd_rawmidi_substream_t, list);
+          substream = list_entry(list, struct snd_rawmidi_substream, list);
           sprintf(substream->name, "My MIDI Port %d", substream->number + 1);
   }
   /* same for SNDRV_RAWMIDI_STREAM_INPUT */
@@ -4463,12 +4465,12 @@ struct _snd_pcm_runtime {
 
       <para>
       If there is more than one port, your callbacks can determine the
-      port index from the snd_rawmidi_substream_t data passed to each
+      port index from the struct snd_rawmidi_substream data passed to each
       callback:
         <informalexample>
           <programlisting>
 <![CDATA[
-  snd_rawmidi_substream_t *substream;
+  struct snd_rawmidi_substream *substream;
   int index = substream->number;
 ]]>
           </programlisting>
@@ -4481,7 +4483,7 @@ struct _snd_pcm_runtime {
         <informalexample>
           <programlisting>
 <![CDATA[
-  static int snd_xxx_open(snd_rawmidi_substream_t *substream);
+  static int snd_xxx_open(struct snd_rawmidi_substream *substream);
 ]]>
           </programlisting>
         </informalexample>
@@ -4499,7 +4501,7 @@ struct _snd_pcm_runtime {
         <informalexample>
           <programlisting>
 <![CDATA[
-  static int snd_xxx_close(snd_rawmidi_substream_t *substream);
+  static int snd_xxx_close(struct snd_rawmidi_substream *substream);
 ]]>
           </programlisting>
         </informalexample>
@@ -4522,7 +4524,7 @@ struct _snd_pcm_runtime {
         <informalexample>
           <programlisting>
 <![CDATA[
-  static void snd_xxx_output_trigger(snd_rawmidi_substream_t *substream, int up);
+  static void snd_xxx_output_trigger(struct snd_rawmidi_substream *substream, int up);
 ]]>
           </programlisting>
         </informalexample>
@@ -4547,7 +4549,7 @@ struct _snd_pcm_runtime {
 <![CDATA[
   unsigned char data;
   while (snd_rawmidi_transmit_peek(substream, &data, 1) == 1) {
-          if (mychip_try_to_transmit(data))
+          if (snd_mychip_try_to_transmit(data))
                   snd_rawmidi_transmit_ack(substream, 1);
           else
                   break; /* hardware FIFO full */
@@ -4564,11 +4566,11 @@ struct _snd_pcm_runtime {
           <informalexample>
             <programlisting>
 <![CDATA[
-  while (mychip_transmit_possible()) {
+  while (snd_mychip_transmit_possible()) {
           unsigned char data;
           if (snd_rawmidi_transmit(substream, &data, 1) != 1)
                   break; /* no more data */
-          mychip_transmit(data);
+          snd_mychip_transmit(data);
   }
 ]]>
             </programlisting>
@@ -4603,7 +4605,7 @@ struct _snd_pcm_runtime {
         <informalexample>
           <programlisting>
 <![CDATA[
-  static void snd_xxx_input_trigger(snd_rawmidi_substream_t *substream, int up);
+  static void snd_xxx_input_trigger(struct snd_rawmidi_substream *substream, int up);
 ]]>
           </programlisting>
         </informalexample>
@@ -4647,7 +4649,7 @@ struct _snd_pcm_runtime {
         <informalexample>
           <programlisting>
 <![CDATA[
-  static void snd_xxx_drain(snd_rawmidi_substream_t *substream);
+  static void snd_xxx_drain(struct snd_rawmidi_substream *substream);
 ]]>
           </programlisting>
         </informalexample>
@@ -4661,7 +4663,7 @@ struct _snd_pcm_runtime {
 
         <para>
         This callback is optional.  If you do not set
-        <structfield>drain</structfield> in the snd_rawmidi_ops_t
+        <structfield>drain</structfield> in the struct snd_rawmidi_ops
         structure, ALSA will simply wait for 50&nbsp;milliseconds
         instead.
         </para>
@@ -4703,7 +4705,7 @@ struct _snd_pcm_runtime {
         <informalexample>
           <programlisting>
 <![CDATA[
-  opl3_t *opl3;
+  struct snd_opl3 *opl3;
   snd_opl3_create(card, lport, rport, OPL3_HW_OPL3_XXX,
                   integrated, &opl3);
 ]]>
@@ -4736,7 +4738,7 @@ struct _snd_pcm_runtime {
         <informalexample>
           <programlisting>
 <![CDATA[
-  opl3_t *opl3;
+  struct snd_opl3 *opl3;
   snd_opl3_new(card, OPL3_HW_OPL3_XXX, &opl3);
 ]]>
           </programlisting>
@@ -4767,7 +4769,7 @@ struct _snd_pcm_runtime {
         <informalexample>
           <programlisting>
 <![CDATA[
-  snd_hwdep_t *opl3hwdep;
+  struct snd_hwdep *opl3hwdep;
   snd_opl3_hwdep_new(opl3, 0, 1, &opl3hwdep);
 ]]>
           </programlisting>
@@ -4804,7 +4806,7 @@ struct _snd_pcm_runtime {
         <informalexample>
           <programlisting>
 <![CDATA[
-  snd_hwdep_t *hw;
+  struct snd_hwdep *hw;
   snd_hwdep_new(card, "My HWDEP", 0, &hw);
 ]]>
           </programlisting>
@@ -4823,7 +4825,7 @@ struct _snd_pcm_runtime {
         <informalexample>
           <programlisting>
 <![CDATA[
-  mydata_t *p = kmalloc(sizeof(*p), GFP_KERNEL);
+  struct mydata *p = kmalloc(sizeof(*p), GFP_KERNEL);
   hw->private_data = p;
   hw->private_free = mydata_free;
 ]]>
@@ -4835,9 +4837,9 @@ struct _snd_pcm_runtime {
         <informalexample>
           <programlisting>
 <![CDATA[
-  static void mydata_free(snd_hwdep_t *hw)
+  static void mydata_free(struct snd_hwdep *hw)
   {
-          mydata_t *p = hw->private_data;
+          struct mydata *p = hw->private_data;
           kfree(p);
   }
 ]]>
@@ -5061,9 +5063,9 @@ struct _snd_pcm_runtime {
         <informalexample>
           <programlisting>
 <![CDATA[
-  static int playback_copy(snd_pcm_substream_t *substream, int channel,
+  static int playback_copy(struct snd_pcm_substream *substream, int channel,
                snd_pcm_uframes_t pos, void *src, snd_pcm_uframes_t count);
-  static int capture_copy(snd_pcm_substream_t *substream, int channel,
+  static int capture_copy(struct snd_pcm_substream *substream, int channel,
                snd_pcm_uframes_t pos, void *dst, snd_pcm_uframes_t count);
 ]]>
           </programlisting>
@@ -5144,7 +5146,7 @@ struct _snd_pcm_runtime {
         <informalexample>
           <programlisting>
 <![CDATA[
-  static int silence(snd_pcm_substream_t *substream, int channel,
+  static int silence(struct snd_pcm_substream *substream, int channel,
                      snd_pcm_uframes_t pos, snd_pcm_uframes_t count);
 ]]>
           </programlisting>
@@ -5211,7 +5213,7 @@ struct _snd_pcm_runtime {
         <informalexample>
           <programlisting>
 <![CDATA[
-  snd_pcm_sgbuf_t *sgbuf = (snd_pcm_sgbuf_t*)substream->dma_private;
+  struct snd_sg_buf *sgbuf = (struct snd_sg_buf_t*)substream->dma_private;
 ]]>
           </programlisting>
         </informalexample>
@@ -5266,7 +5268,7 @@ struct _snd_pcm_runtime {
   #include <linux/vmalloc.h>
 
   /* get the physical page pointer on the given offset */
-  static struct page *mychip_page(snd_pcm_substream_t *substream,
+  static struct page *mychip_page(struct snd_pcm_substream *substream,
                                   unsigned long offset)
   {
           void *pageptr = substream->runtime->dma_area + offset;
@@ -5301,7 +5303,7 @@ struct _snd_pcm_runtime {
       <informalexample>
         <programlisting>
 <![CDATA[
-  snd_info_entry_t *entry;
+  struct snd_info_entry *entry;
   int err = snd_card_proc_new(card, "my-file", &entry);
 ]]>
         </programlisting>
@@ -5345,8 +5347,8 @@ struct _snd_pcm_runtime {
       <informalexample>
         <programlisting>
 <![CDATA[
-  static void my_proc_read(snd_info_entry_t *entry,
-                           snd_info_buffer_t *buffer);
+  static void my_proc_read(struct snd_info_entry *entry,
+                           struct snd_info_buffer *buffer);
 ]]>
         </programlisting>
       </informalexample>
@@ -5361,10 +5363,10 @@ struct _snd_pcm_runtime {
       <informalexample>
         <programlisting>
 <![CDATA[
-  static void my_proc_read(snd_info_entry_t *entry,
-                           snd_info_buffer_t *buffer)
+  static void my_proc_read(struct snd_info_entry *entry,
+                           struct snd_info_buffer *buffer)
   {
-          chip_t *chip = entry->private_data;
+          struct my_chip *chip = entry->private_data;
 
           snd_iprintf(buffer, "This is my chip!\n");
           snd_iprintf(buffer, "Port = %ld\n", chip->port);
@@ -5453,7 +5455,7 @@ struct _snd_pcm_runtime {
       <informalexample>
         <programlisting>
 <![CDATA[
-  static long my_file_io_read(snd_info_entry_t *entry,
+  static long my_file_io_read(struct snd_info_entry *entry,
                               void *file_private_data,
                               struct file *file,
                               char *buf,
@@ -5488,22 +5490,60 @@ struct _snd_pcm_runtime {
       <constant>CONFIG_PM</constant>. 
     </para>
 
+        <para>
+        If the driver supports the suspend/resume
+        <emphasis>fully</emphasis>, that is, the device can be
+        properly resumed to the status at the suspend is called,
+        you can set <constant>SNDRV_PCM_INFO_RESUME</constant> flag
+        to pcm info field.  Usually, this is possible when the
+        registers of ths chip can be safely saved and restored to the
+        RAM.  If this is set, the trigger callback is called with
+        <constant>SNDRV_PCM_TRIGGER_RESUME</constant> after resume
+        callback is finished. 
+        </para>
+
+        <para>
+        Even if the driver doesn't support PM fully but only the
+        partial suspend/resume is possible, it's still worthy to
+        implement suspend/resume callbacks.  In such a case, applications
+        would reset the status by calling
+        <function>snd_pcm_prepare()</function> and restart the stream
+        appropriately.  Hence, you can define suspend/resume callbacks
+        below but don't set <constant>SNDRV_PCM_INFO_RESUME</constant>
+        info flag to the PCM.
+        </para>
+        
+        <para>
+        Note that the trigger with SUSPEND can be always called when
+        <function>snd_pcm_suspend_all</function> is called,
+        regardless of <constant>SNDRV_PCM_INFO_RESUME</constant> flag.
+        The <constant>RESUME</constant> flag affects only the behavior
+        of <function>snd_pcm_resume()</function>.
+        (Thus, in theory,
+        <constant>SNDRV_PCM_TRIGGER_RESUME</constant> isn't needed
+        to be handled in the trigger callback when no
+        <constant>SNDRV_PCM_INFO_RESUME</constant> flag is set.  But,
+        it's better to keep it for compatibility reason.)
+        </para>
     <para>
-      ALSA provides the common power-management layer. Each card driver
-      needs to have only low-level suspend and resume callbacks.
+      In the earlier version of ALSA drivers, a common
+      power-management layer was provided, but it has been removed.
+      The driver needs to define the suspend/resume hooks according to
+      the bus the device is assigned.  In the case of PCI driver, the
+      callbacks look like below:
 
       <informalexample>
         <programlisting>
 <![CDATA[
   #ifdef CONFIG_PM
-  static int snd_my_suspend(snd_card_t *card, pm_message_t state)
+  static int snd_my_suspend(struct pci_dev *pci, pm_message_t state)
   {
-          .... // do things for suspsend
+          .... /* do things for suspsend */
           return 0;
   }
-  static int snd_my_resume(snd_card_t *card)
+  static int snd_my_resume(struct pci_dev *pci)
   {
-          .... // do things for suspsend
+          .... /* do things for suspsend */
           return 0;
   }
   #endif
@@ -5516,11 +5556,18 @@ struct _snd_pcm_runtime {
       The scheme of the real suspend job is as following.
 
       <orderedlist>
-        <listitem><para>Retrieve the chip data from pm_private_data field.</para></listitem>
+        <listitem><para>Retrieve the card and the chip data.</para></listitem>
+        <listitem><para>Call <function>snd_power_change_state()</function> with
+          <constant>SNDRV_CTL_POWER_D3hot</constant> to change the
+          power status.</para></listitem>
         <listitem><para>Call <function>snd_pcm_suspend_all()</function> to suspend the running PCM streams.</para></listitem>
+        <listitem><para>If AC97 codecs are used, call
+        <function>snd_ac97_resume()</function> for each codec.</para></listitem>
         <listitem><para>Save the register values if necessary.</para></listitem>
         <listitem><para>Stop the hardware if necessary.</para></listitem>
-        <listitem><para>Disable the PCI device by calling <function>pci_disable_device()</function>.</para></listitem>
+        <listitem><para>Disable the PCI device by calling
+          <function>pci_disable_device()</function>.  Then, call
+          <function>pci_save_state()</function> at last.</para></listitem>
       </orderedlist>
     </para>
 
@@ -5530,18 +5577,24 @@ struct _snd_pcm_runtime {
       <informalexample>
         <programlisting>
 <![CDATA[
-  static int mychip_suspend(snd_card_t *card, pm_message_t state)
+  static int mychip_suspend(strut pci_dev *pci, pm_message_t state)
   {
           /* (1) */
-          mychip_t *chip = card->pm_private_data;
+          struct snd_card *card = pci_get_drvdata(pci);
+          struct mychip *chip = card->private_data;
           /* (2) */
-          snd_pcm_suspend_all(chip->pcm);
+          snd_power_change_state(card, SNDRV_CTL_POWER_D3hot);
           /* (3) */
-          snd_mychip_save_registers(chip);
+          snd_pcm_suspend_all(chip->pcm);
           /* (4) */
-          snd_mychip_stop_hardware(chip);
+          snd_ac97_suspend(chip->ac97);
           /* (5) */
-          pci_disable_device(chip->pci);
+          snd_mychip_save_registers(chip);
+          /* (6) */
+          snd_mychip_stop_hardware(chip);
+          /* (7) */
+          pci_disable_device(pci);
+          pci_save_state(pci);
           return 0;
   }
 ]]>
@@ -5553,14 +5606,17 @@ struct _snd_pcm_runtime {
     The scheme of the real resume job is as following.
 
     <orderedlist>
-    <listitem><para>Retrieve the chip data from pm_private_data field.</para></listitem>
-    <listitem><para>Enable the pci device again by calling
-    <function>pci_enable_device()</function>.</para></listitem>
+    <listitem><para>Retrieve the card and the chip data.</para></listitem>
+    <listitem><para>Set up PCI.  First, call <function>pci_restore_state()</function>.
+        Then enable the pci device again by calling <function>pci_enable_device()</function>.
+        Call <function>pci_set_master()</function> if necessary, too.</para></listitem>
     <listitem><para>Re-initialize the chip.</para></listitem>
     <listitem><para>Restore the saved registers if necessary.</para></listitem>
     <listitem><para>Resume the mixer, e.g. calling
     <function>snd_ac97_resume()</function>.</para></listitem>
     <listitem><para>Restart the hardware (if any).</para></listitem>
+    <listitem><para>Call <function>snd_power_change_state()</function> with
+        <constant>SNDRV_CTL_POWER_D0</constant> to notify the processes.</para></listitem>
     </orderedlist>
     </para>
 
@@ -5570,12 +5626,15 @@ struct _snd_pcm_runtime {
       <informalexample>
         <programlisting>
 <![CDATA[
-  static void mychip_resume(mychip_t *chip)
+  static int mychip_resume(struct pci_dev *pci)
   {
           /* (1) */
-          mychip_t *chip = card->pm_private_data;
+          struct snd_card *card = pci_get_drvdata(pci);
+          struct mychip *chip = card->private_data;
           /* (2) */
-          pci_enable_device(chip->pci);
+          pci_restore_state(pci);
+          pci_enable_device(pci);
+          pci_set_master(pci);
           /* (3) */
           snd_mychip_reinit_chip(chip);
           /* (4) */
@@ -5584,6 +5643,8 @@ struct _snd_pcm_runtime {
           snd_ac97_resume(chip->ac97);
           /* (6) */
           snd_mychip_restart_chip(chip);
+          /* (7) */
+          snd_power_change_state(card, SNDRV_CTL_POWER_D0);
           return 0;
   }
 ]]>
@@ -5592,8 +5653,23 @@ struct _snd_pcm_runtime {
     </para>
 
     <para>
-      OK, we have all callbacks now. Let's set up them now. In the
-      initialization of the card, add the following: 
+        As shown in the above, it's better to save registers after
+        suspending the PCM operations via
+        <function>snd_pcm_suspend_all()</function> or
+        <function>snd_pcm_suspend()</function>.  It means that the PCM
+        streams are already stoppped when the register snapshot is
+        taken.  But, remind that you don't have to restart the PCM
+        stream in the resume callback. It'll be restarted via 
+        trigger call with <constant>SNDRV_PCM_TRIGGER_RESUME</constant>
+        when necessary.
+    </para>
+
+    <para>
+      OK, we have all callbacks now. Let's set them up. In the
+      initialization of the card, make sure that you can get the chip
+      data from the card instance, typically via
+      <structfield>private_data</structfield> field, in case you
+      created the chip data individually.
 
       <informalexample>
         <programlisting>
@@ -5602,33 +5678,56 @@ struct _snd_pcm_runtime {
                                const struct pci_device_id *pci_id)
   {
           ....
-          snd_card_t *card;
-          mychip_t *chip;
+          struct snd_card *card;
+          struct mychip *chip;
           ....
-          snd_card_set_pm_callback(card, snd_my_suspend, snd_my_resume, chip);
+          card = snd_card_new(index[dev], id[dev], THIS_MODULE, NULL);
+          ....
+          chip = kzalloc(sizeof(*chip), GFP_KERNEL);
+          ....
+          card->private_data = chip;
+          ....
+  }
+]]>
+        </programlisting>
+      </informalexample>
+
+        When you created the chip data with
+        <function>snd_card_new()</function>, it's anyway accessible
+        via <structfield>private_data</structfield> field.
+
+      <informalexample>
+        <programlisting>
+<![CDATA[
+  static int __devinit snd_mychip_probe(struct pci_dev *pci,
+                               const struct pci_device_id *pci_id)
+  {
+          ....
+          struct snd_card *card;
+          struct mychip *chip;
+          ....
+          card = snd_card_new(index[dev], id[dev], THIS_MODULE,
+                              sizeof(struct mychip));
+          ....
+          chip = card->private_data;
           ....
   }
 ]]>
         </programlisting>
       </informalexample>
 
-    Here you don't have to put ifdef CONFIG_PM around, since it's already
-    checked in the header and expanded to empty if not needed.
     </para>
 
     <para>
-      If you need a space for saving the registers, you'll need to
-    allocate the buffer for it here, too, since it would be fatal
+      If you need a space for saving the registers, allocate the
+        buffer for it here, too, since it would be fatal
     if you cannot allocate a memory in the suspend phase.
     The allocated buffer should be released in the corresponding
     destructor.
     </para>
 
     <para>
-      And next, set suspend/resume callbacks to the pci_driver,
-      This can be done by passing a macro SND_PCI_PM_CALLBACKS
-      in the pci_driver struct.  This macro is expanded to the correct
-      (global) callbacks if CONFIG_PM is set.
+      And next, set suspend/resume callbacks to the pci_driver.
 
       <informalexample>
         <programlisting>
@@ -5638,7 +5737,10 @@ struct _snd_pcm_runtime {
           .id_table = snd_my_ids,
           .probe = snd_my_probe,
           .remove = __devexit_p(snd_my_remove),
-          SND_PCI_PM_CALLBACKS
+  #ifdef CONFIG_PM
+          .suspend = snd_my_suspend,
+          .resume = snd_my_resume,
+  #endif
   };
 ]]>
         </programlisting>
diff --git a/Documentation/sound/alsa/Procfile.txt b/Documentation/sound/alsa/Procfile.txt
index 25c5d648aef6..1fe48846d78f 100644
--- a/Documentation/sound/alsa/Procfile.txt
+++ b/Documentation/sound/alsa/Procfile.txt
@@ -138,6 +138,22 @@ card*/codec97#0/ac97#?-?+regs
         # echo 02 9f1f > /proc/asound/card0/codec97#0/ac97#0-0+regs
 
 
+USB Audio Streams
+-----------------
+
+card*/stream*
+        Shows the assignment and the current status of each audio stream
+        of the given card.  This information is very useful for debugging.
+
+
+HD-Audio Codecs
+---------------
+
+card*/codec#*
+        Shows the general codec information and the attribute of each
+        widget node.
+
+
 Sequencer Information
 ---------------------
 
diff --git a/Documentation/sound/alsa/hda_codec.txt b/Documentation/sound/alsa/hda_codec.txt
index e9d07b8f1acb..0be57ed81302 100644
--- a/Documentation/sound/alsa/hda_codec.txt
+++ b/Documentation/sound/alsa/hda_codec.txt
@@ -63,7 +63,7 @@ The bus instance is created via snd_hda_bus_new().  You need to pass
 the card instance, the template, and the pointer to store the
 resultant bus instance.
 
-int snd_hda_bus_new(snd_card_t *card, const struct hda_bus_template *temp,
+int snd_hda_bus_new(struct snd_card *card, const struct hda_bus_template *temp,
                     struct hda_bus **busp);
 
 It returns zero if successful.  A negative return value means any
@@ -166,14 +166,14 @@ The ops field contains the following callback functions:
 
 struct hda_pcm_ops {
         int (*open)(struct hda_pcm_stream *info, struct hda_codec *codec,
-                    snd_pcm_substream_t *substream);
+                    struct snd_pcm_substream *substream);
         int (*close)(struct hda_pcm_stream *info, struct hda_codec *codec,
-                     snd_pcm_substream_t *substream);
+                     struct snd_pcm_substream *substream);
         int (*prepare)(struct hda_pcm_stream *info, struct hda_codec *codec,
                        unsigned int stream_tag, unsigned int format,
-                       snd_pcm_substream_t *substream);
+                       struct snd_pcm_substream *substream);
         int (*cleanup)(struct hda_pcm_stream *info, struct hda_codec *codec,
-                       snd_pcm_substream_t *substream);
+                       struct snd_pcm_substream *substream);
 };
 
 All are non-NULL, so you can call them safely without NULL check.
@@ -284,7 +284,7 @@ parameter, and PCI subsystem IDs.  If the matching entry is found, it
 returns the config field value.
 
 snd_hda_add_new_ctls() can be used to create and add control entries.
-Pass the zero-terminated array of snd_kcontrol_new_t.  The same array
+Pass the zero-terminated array of struct snd_kcontrol_new.  The same array
 can be passed to snd_hda_resume_ctls() for resume.
 Note that this will call control->put callback of these entries.  So,
 put callback should check codec->in_resume and force to restore the
@@ -292,7 +292,7 @@ given value if it's non-zero even if the value is identical with the
 cached value.
 
 Macros HDA_CODEC_VOLUME(), HDA_CODEC_MUTE() and their variables can be
-used for the entry of snd_kcontrol_new_t.
+used for the entry of struct snd_kcontrol_new.
 
 The input MUX helper callbacks for such a control are provided, too:
 snd_hda_input_mux_info() and snd_hda_input_mux_put().  See
diff --git a/Documentation/sysrq.txt b/Documentation/sysrq.txt
index baf17b381588..ad0bedf678b3 100644
--- a/Documentation/sysrq.txt
+++ b/Documentation/sysrq.txt
@@ -202,17 +202,13 @@ you must call __handle_sysrq_nolock instead.
 
 *  I have more questions, who can I ask?
 ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
-You may feel free to send email to myrdraal@deathsdoor.com, and I will
-respond as soon as possible.
- -Myrdraal
-
 And I'll answer any questions about the registration system you got, also
 responding as soon as possible.
  -Crutcher
 
 *  Credits
 ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
-Written by Mydraal <myrdraal@deathsdoor.com>
+Written by Mydraal <vulpyne@vulpyne.net>
 Updated by Adam Sulmicki <adam@cfar.umd.edu>
 Updated by Jeremy M. Dolan <jmd@turbogeek.org> 2001/01/28 10:15:59
 Added to by Crutcher Dunnavant <crutcher+kernel@datastacks.com>