aboutsummaryrefslogtreecommitdiffstats
path: root/Documentation
diff options
context:
space:
mode:
authorTakashi Iwai <tiwai@suse.de>2009-05-06 11:33:19 -0400
committerTakashi Iwai <tiwai@suse.de>2009-05-06 11:33:19 -0400
commit72cbfd45fac627de4bd38c203baaac40cd26477c (patch)
tree830a5958d85a399c62580ab6941e304a769706d6 /Documentation
parent2bf864ac963c5126a9c7c3dce0958390fb612270 (diff)
ALSA: ice1724 - Add ESI Maya44 support
Added the support for ESI Maya44 board to ice1724 driver. Signed-off-by: Takashi Iwai <tiwai@suse.de>
Diffstat (limited to 'Documentation')
-rw-r--r--Documentation/sound/alsa/ALSA-Configuration.txt3
-rw-r--r--Documentation/sound/alsa/README.maya44163
2 files changed, 165 insertions, 1 deletions
diff --git a/Documentation/sound/alsa/ALSA-Configuration.txt b/Documentation/sound/alsa/ALSA-Configuration.txt
index 012858d2b119..821a99480feb 100644
--- a/Documentation/sound/alsa/ALSA-Configuration.txt
+++ b/Documentation/sound/alsa/ALSA-Configuration.txt
@@ -925,6 +925,7 @@ Prior to version 0.9.0rc4 options had a 'snd_' prefix. This was removed.
925 * Onkyo SE-90PCI 925 * Onkyo SE-90PCI
926 * Onkyo SE-200PCI 926 * Onkyo SE-200PCI
927 * ESI Juli@ 927 * ESI Juli@
928 * ESI Maya44
928 * Hercules Fortissimo IV 929 * Hercules Fortissimo IV
929 * EGO-SYS WaveTerminal 192M 930 * EGO-SYS WaveTerminal 192M
930 931
@@ -933,7 +934,7 @@ Prior to version 0.9.0rc4 options had a 'snd_' prefix. This was removed.
933 prodigy71xt, prodigy71hifi, prodigyhd2, prodigy192, 934 prodigy71xt, prodigy71hifi, prodigyhd2, prodigy192,
934 juli, aureon51, aureon71, universe, ap192, k8x800, 935 juli, aureon51, aureon71, universe, ap192, k8x800,
935 phase22, phase28, ms300, av710, se200pci, se90pci, 936 phase22, phase28, ms300, av710, se200pci, se90pci,
936 fortissimo4, sn25p, WT192M 937 fortissimo4, sn25p, WT192M, maya44
937 938
938 This module supports multiple cards and autoprobe. 939 This module supports multiple cards and autoprobe.
939 940
diff --git a/Documentation/sound/alsa/README.maya44 b/Documentation/sound/alsa/README.maya44
new file mode 100644
index 000000000000..0e41576fa13e
--- /dev/null
+++ b/Documentation/sound/alsa/README.maya44
@@ -0,0 +1,163 @@
1NOTE: The following is the original document of Rainer's patch that the
2current maya44 code based on. Some contents might be obsoleted, but I
3keep here as reference -- tiwai
4
5----------------------------------------------------------------
6
7STATE OF DEVELOPMENT:
8
9This driver is being developed on the initiative of Piotr Makowski (oponek@gmail.com) and financed by Lars Bergmann.
10Development is carried out by Rainer Zimmermann (mail@lightshed.de).
11
12ESI provided a sample Maya44 card for the development work.
13
14However, unfortunately it has turned out difficult to get detailed programming information, so I (Rainer Zimmermann) had to find out some card-specific information by experiment and conjecture. Some information (in particular, several GPIO bits) is still missing.
15
16This is the first testing version of the Maya44 driver released to the alsa-devel mailing list (Feb 5, 2008).
17
18
19The following functions work, as tested by Rainer Zimmermann and Piotr Makowski:
20
21- playback and capture at all sampling rates
22- input/output level
23- crossmixing
24- line/mic switch
25- phantom power switch
26- analogue monitor a.k.a bypass
27
28
29The following functions *should* work, but are not fully tested:
30
31- Channel 3+4 analogue - S/PDIF input switching
32- S/PDIF output
33- all inputs/outputs on the M/IO/DIO extension card
34- internal/external clock selection
35
36
37*In particular, we would appreciate testing of these functions by anyone who has access to an M/IO/DIO extension card.*
38
39
40Things that do not seem to work:
41
42- The level meters ("multi track") in 'alsamixer' do not seem to react to signals in (if this is a bug, it would probably be in the existing ICE1724 code).
43
44- Ardour 2.1 seems to work only via JACK, not using ALSA directly or via OSS. This still needs to be tracked down.
45
46
47DRIVER DETAILS:
48
49the following files were added:
50
51pci/ice1724/maya44.c - Maya44 specific code
52pci/ice1724/maya44.h
53pci/ice1724/ice1724.patch
54pci/ice1724/ice1724.h.patch - PROPOSED patch to ice1724.h (see SAMPLING RATES)
55i2c/other/wm8776.c - low-level access routines for Wolfson WM8776 codecs
56include/wm8776.h
57
58
59Note that the wm8776.c code is meant to be card-independent and does not actually register the codec with the ALSA infrastructure.
60This is done in maya44.c, mainly because some of the WM8776 controls are used in Maya44-specific ways, and should be named appropriately.
61
62
63the following files were created in pci/ice1724, simply #including the corresponding file from the alsa-kernel tree:
64
65wtm.h
66vt1720_mobo.h
67revo.h
68prodigy192.h
69pontis.h
70phase.h
71maya44.h
72juli.h
73aureon.h
74amp.h
75envy24ht.h
76se.h
77prodigy_hifi.h
78
79
80*I hope this is the correct way to do things.*
81
82
83SAMPLING RATES:
84
85The Maya44 card (or more exactly, the Wolfson WM8776 codecs) allow a maximum sampling rate of 192 kHz for playback and 92 kHz for capture.
86
87As the ICE1724 chip only allows one global sampling rate, this is handled as follows:
88
89* setting the sampling rate on any open PCM device on the maya44 card will always set the *global* sampling rate for all playback and capture channels.
90
91* In the current state of the driver, setting rates of up to 192 kHz is permitted even for capture devices.
92
93*AVOID CAPTURING AT RATES ABOVE 96kHz*, even though it may appear to work. The codec cannot actually capture at such rates, meaning poor quality.
94
95
96I propose some additional code for limiting the sampling rate when setting on a capture pcm device. However because of the global sampling rate, this logic would be somewhat problematic.
97
98The proposed code (currently deactivated) is in ice1712.h.patch, ice1724.c and maya44.c (in pci/ice1712).
99
100
101SOUND DEVICES:
102
103PCM devices correspond to inputs/outputs as follows (assuming Maya44 is card #0):
104
105hw:0,0 input - stereo, analog input 1+2
106hw:0,0 output - stereo, analog output 1+2
107hw:0,1 input - stereo, analog input 3+4 OR S/PDIF input
108hw:0,1 output - stereo, analog output 3+4 (and SPDIF out)
109
110
111NAMING OF MIXER CONTROLS:
112
113(for more information about the signal flow, please refer to the block diagram on p.24 of the ESI Maya44 manual, or in the ESI windows software).
114
115
116PCM: (digital) output level for channel 1+2
117PCM 1: same for channel 3+4
118
119Mic Phantom+48V: switch for +48V phantom power for electrostatic microphones on input 1/2.
120 Make sure this is not turned on while any other source is connected to input 1/2.
121 It might damage the source and/or the maya44 card.
122
123Mic/Line input: if switch is is on, input jack 1/2 is microphone input (mono), otherwise line input (stereo).
124
125Bypass: analogue bypass from ADC input to output for channel 1+2. Same as "Monitor" in the windows driver.
126Bypass 1: same for channel 3+4.
127
128Crossmix: cross-mixer from channels 1+2 to channels 3+4
129Crossmix 1: cross-mixer from channels 3+4 to channels 1+2
130
131IEC958 Output: switch for S/PDIF output.
132 This is not supported by the ESI windows driver.
133 S/PDIF should output the same signal as channel 3+4. [untested!]
134
135
136Digitial output selectors:
137
138 These switches allow a direct digital routing from the ADCs to the DACs.
139 Each switch determines where the digital input data to one of the DACs comes from.
140 They are not supported by the ESI windows driver.
141 For normal operation, they should all be set to "PCM out".
142
143H/W: Output source channel 1
144H/W 1: Output source channel 2
145H/W 2: Output source channel 3
146H/W 3: Output source channel 4
147
148H/W 4 ... H/W 9: unknown function, left in to enable testing.
149 Possibly some of these control S/PDIF output(s).
150 If these turn out to be unused, they will go away in later driver versions.
151
152Selectable values for each of the digital output selectors are:
153 "PCM out" -> DAC output of the corresponding channel (default setting)
154 "Input 1"...
155 "Input 4" -> direct routing from ADC output of the selected input channel
156
157
158--------
159
160Feb 14, 2008
161Rainer Zimmermann
162mail@lightshed.de
163