Merge master.kernel.org:/pub/scm/linux/kernel/git/mchehab/v4l-dvb

* master.kernel.org:/pub/scm/linux/kernel/git/mchehab/v4l-dvb: (244 commits)
  V4L/DVB (4210b): git-dvb: tea575x-tuner build fix
  V4L/DVB (4210a): git-dvb versus matroxfb
  V4L/DVB (4209): Added some BTTV PCI IDs for newer boards
  Fixes some sync issues between V4L/DVB development and GIT
  V4L/DVB (4206): Cx88-blackbird: always set encoder height based on tvnorm->id
  V4L/DVB (4205): Merge tda9887 module into tuner.
  V4L/DVB (4203): Explicitly set the enum values.
  V4L/DVB (4202): allow selecting CX2341x port mode
  V4L/DVB (4200): Disable bitrate_mode when encoding mpeg-1.
  V4L/DVB (4199): Add cx2341x-specific control array to cx2341x.c
  V4L/DVB (4198): Avoid newer usages of obsoleted experimental MPEGCOMP API
  V4L/DVB (4197): Port new MPEG API to saa7134-empress with saa6752hs
  V4L/DVB (4196): Port cx88-blackbird to the new MPEG API.
  V4L/DVB (4193): Update cx2341x fw encoding API doc.
  V4L/DVB (4192): Use control helpers for saa7115, cx25840, msp3400.
  V4L/DVB (4191): Add CX2341X MPEG encoder module.
  V4L/DVB (4190): Add helper functions for control processing to v4l2-common.
  V4L/DVB (4189): Add videodev support for VIDIOC_S/G/TRY_EXT_CTRLS.
  V4L/DVB (4188): Add new MPEG control/ioctl definitions to videodev2.h
  V4L/DVB (4186): Add support for the DNTV Live! mini DVB-T card.
  ...

1 files changed, 16 insertions, 16 deletions

diff --git a/Documentation/video4linux/ov511.txt b/Documentation/video4linux/ov511.txt
index 142741e3c578..79af610d4ba5 100644
--- a/Documentation/video4linux/ov511.txt
+++ b/Documentation/video4linux/ov511.txt
@@ -81,7 +81,7 @@ MODULE PARAMETERS:
   TYPE: integer (Boolean)
   DEFAULT: 1
   DESC: Brightness is normally under automatic control and can't be set
-        manually by the video app. Set to 0 for manual control.
+        manually by the video app. Set to 0 for manual control.
 
   NAME: autogain
   TYPE: integer (Boolean)
@@ -97,13 +97,13 @@ MODULE PARAMETERS:
   TYPE: integer (0-6)
   DEFAULT: 3
   DESC: Sets the threshold for printing debug messages. The higher the value,
-        the more is printed. The levels are cumulative, and are as follows:
-          0=no debug messages
-          1=init/detection/unload and other significant messages
-          2=some warning messages
-          3=config/control function calls
-          4=most function calls and data parsing messages
-          5=highly repetitive mesgs
+        the more is printed. The levels are cumulative, and are as follows:
+          0=no debug messages
+          1=init/detection/unload and other significant messages
+          2=some warning messages
+          3=config/control function calls
+          4=most function calls and data parsing messages
+          5=highly repetitive mesgs
 
   NAME: snapshot
   TYPE: integer (Boolean)
@@ -116,24 +116,24 @@ MODULE PARAMETERS:
   TYPE: integer (1-4 for OV511, 1-31 for OV511+)
   DEFAULT: 1
   DESC: Number of cameras allowed to stream simultaneously on a single bus.
-        Values higher than 1 reduce the data rate of each camera, allowing two
-        or more to be used at once. If you have a complicated setup involving
-        both OV511 and OV511+ cameras, trial-and-error may be necessary for
-        finding the optimum setting.
+        Values higher than 1 reduce the data rate of each camera, allowing two
+        or more to be used at once. If you have a complicated setup involving
+        both OV511 and OV511+ cameras, trial-and-error may be necessary for
+        finding the optimum setting.
 
   NAME: compress
   TYPE: integer (Boolean)
   DEFAULT: 0
   DESC: Set this to 1 to turn on the camera's compression engine. This can
-        potentially increase the frame rate at the expense of quality, if you
-        have a fast CPU. You must load the proper compression module for your
-        camera before starting your application (ov511_decomp or ov518_decomp).
+        potentially increase the frame rate at the expense of quality, if you
+        have a fast CPU. You must load the proper compression module for your
+        camera before starting your application (ov511_decomp or ov518_decomp).
 
   NAME: testpat
   TYPE: integer (Boolean)
   DEFAULT: 0
   DESC: This configures the camera's sensor to transmit a colored test-pattern
-        instead of an image. This does not work correctly yet.
+        instead of an image. This does not work correctly yet.
 
   NAME: dumppix
   TYPE: integer (0-2)