Merge git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb-2.6

* git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb-2.6: (148 commits)
  USB: serial: fix stalled writes
  USB: remove fake "address-of" expressions
  USB: fix thread-unsafe anchor utiliy routines
  USB: usbtest: support test device with only one iso-in or iso-out endpoint
  USB: usbtest: avoid to free coherent buffer in atomic context
  USB: xhci: Set DMA mask for host.
  USB: xhci: Don't flush doorbell writes.
  USB: xhci: Reduce reads and writes of interrupter registers.
  USB: xhci: Make xhci_set_hc_event_deq() static.
  USB: xhci: Minimize HW event ring dequeue pointer writes.
  USB: xhci: Make xhci_handle_event() static.
  USB: xhci: Remove unnecessary reads of IRQ_PENDING register.
  USB: xhci: Performance - move xhci_work() into xhci_irq()
  USB: xhci: Performance - move interrupt handlers into xhci-ring.c
  USB: xhci: Performance - move functions that find ep ring.
  USB:: fix linux/usb.h kernel-doc warnings
  USB: add USB serial ssu100 driver
  USB: usb-storage: implement autosuspend
  USB: ehci: fix remove of ehci debugfs dir
  USB: Add USB 2.0 to ssb ohci driver
  ...

1 files changed, 107 insertions, 0 deletions

diff --git a/Documentation/usb/linux-cdc-acm.inf b/Documentation/usb/linux-cdc-acm.inf
new file mode 100644
index 000000000000..612e7220fb29
--- /dev/null
+++ b/Documentation/usb/linux-cdc-acm.inf
@@ -0,0 +1,107 @@
+; Windows USB CDC ACM Setup File
+
+; Based on INF template which was:
+;     Copyright (c) 2000 Microsoft Corporation
+;     Copyright (c) 2007 Microchip Technology Inc.
+; likely to be covered by the MLPL as found at:
+;    <http://msdn.microsoft.com/en-us/cc300389.aspx#MLPL>.
+; For use only on Windows operating systems.
+
+[Version]
+Signature="$Windows NT$"
+Class=Ports
+ClassGuid={4D36E978-E325-11CE-BFC1-08002BE10318}
+Provider=%Linux%
+DriverVer=11/15/2007,5.1.2600.0
+
+[Manufacturer]
+%Linux%=DeviceList, NTamd64
+
+[DestinationDirs]
+DefaultDestDir=12
+
+
+;------------------------------------------------------------------------------
+;  Windows 2000/XP/Vista-32bit Sections
+;------------------------------------------------------------------------------
+
+[DriverInstall.nt]
+include=mdmcpq.inf
+CopyFiles=DriverCopyFiles.nt
+AddReg=DriverInstall.nt.AddReg
+
+[DriverCopyFiles.nt]
+usbser.sys,,,0x20
+
+[DriverInstall.nt.AddReg]
+HKR,,DevLoader,,*ntkern
+HKR,,NTMPDriver,,USBSER.sys
+HKR,,EnumPropPages32,,"MsPorts.dll,SerialPortPropPageProvider"
+
+[DriverInstall.nt.Services]
+AddService=usbser, 0x00000002, DriverService.nt
+
+[DriverService.nt]
+DisplayName=%SERVICE%
+ServiceType=1
+StartType=3
+ErrorControl=1
+ServiceBinary=%12%\USBSER.sys
+
+;------------------------------------------------------------------------------
+;  Vista-64bit Sections
+;------------------------------------------------------------------------------
+
+[DriverInstall.NTamd64]
+include=mdmcpq.inf
+CopyFiles=DriverCopyFiles.NTamd64
+AddReg=DriverInstall.NTamd64.AddReg
+
+[DriverCopyFiles.NTamd64]
+USBSER.sys,,,0x20
+
+[DriverInstall.NTamd64.AddReg]
+HKR,,DevLoader,,*ntkern
+HKR,,NTMPDriver,,USBSER.sys
+HKR,,EnumPropPages32,,"MsPorts.dll,SerialPortPropPageProvider"
+
+[DriverInstall.NTamd64.Services]
+AddService=usbser, 0x00000002, DriverService.NTamd64
+
+[DriverService.NTamd64]
+DisplayName=%SERVICE%
+ServiceType=1
+StartType=3
+ErrorControl=1
+ServiceBinary=%12%\USBSER.sys
+
+
+;------------------------------------------------------------------------------
+;  Vendor and Product ID Definitions
+;------------------------------------------------------------------------------
+; When developing your USB device, the VID and PID used in the PC side
+; application program and the firmware on the microcontroller must match.
+; Modify the below line to use your VID and PID.  Use the format as shown
+; below.
+; Note: One INF file can be used for multiple devices with different
+;       VID and PIDs.  For each supported device, append
+;       ",USB\VID_xxxx&PID_yyyy" to the end of the line.
+;------------------------------------------------------------------------------
+[SourceDisksFiles]
+[SourceDisksNames]
+[DeviceList]
+%DESCRIPTION%=DriverInstall, USB\VID_0525&PID_A4A7, USB\VID_0525&PID_A4AB&MI_02
+
+[DeviceList.NTamd64]
+%DESCRIPTION%=DriverInstall, USB\VID_0525&PID_A4A7, USB\VID_0525&PID_A4AB&MI_02
+
+
+;------------------------------------------------------------------------------
+;  String Definitions
+;------------------------------------------------------------------------------
+;Modify these strings to customize your device
+;------------------------------------------------------------------------------
+[Strings]
+Linux               = "Linux Developer Community"
+DESCRIPTION         = "Gadget Serial"
+SERVICE             = "USB RS-232 Emulation Driver"