aboutsummaryrefslogtreecommitdiffstats
path: root/Documentation/telephony
diff options
context:
space:
mode:
authorLinus Torvalds <torvalds@ppc970.osdl.org>2005-04-16 18:20:36 -0400
committerLinus Torvalds <torvalds@ppc970.osdl.org>2005-04-16 18:20:36 -0400
commit1da177e4c3f41524e886b7f1b8a0c1fc7321cac2 (patch)
tree0bba044c4ce775e45a88a51686b5d9f90697ea9d /Documentation/telephony
Linux-2.6.12-rc2v2.6.12-rc2
Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
Diffstat (limited to 'Documentation/telephony')
-rw-r--r--Documentation/telephony/ixj.txt406
1 files changed, 406 insertions, 0 deletions
diff --git a/Documentation/telephony/ixj.txt b/Documentation/telephony/ixj.txt
new file mode 100644
index 000000000000..621024fd3a18
--- /dev/null
+++ b/Documentation/telephony/ixj.txt
@@ -0,0 +1,406 @@
1Linux Quicknet-Drivers-Howto
2Quicknet Technologies, Inc. (www.quicknet.net)
3Version 0.3.4 December 18, 1999
4
51.0 Introduction
6
7This document describes the first GPL release version of the Linux
8driver for the Quicknet Internet PhoneJACK and Internet LineJACK
9cards. More information about these cards is available at
10www.quicknet.net. The driver version discussed in this document is
110.3.4.
12
13These cards offer nice telco style interfaces to use your standard
14telephone/key system/PBX as the user interface for VoIP applications.
15The Internet LineJACK also offers PSTN connectivity for a single line
16Internet to PSTN gateway. Of course, you can add more than one card
17to a system to obtain multi-line functionality. At this time, the
18driver supports the POTS port on both the Internet PhoneJACK and the
19Internet LineJACK, but the PSTN port on the latter card is not yet
20supported.
21
22This document, and the drivers for the cards, are intended for a
23limited audience that includes technically capable programmers who
24would like to experiment with Quicknet cards. The drivers are
25considered in ALPHA status and are not yet considered stable enough
26for general, widespread use in an unlimited audience.
27
28That's worth saying again:
29
30THE LINUX DRIVERS FOR QUICKNET CARDS ARE PRESENTLY IN A ALPHA STATE
31AND SHOULD NOT BE CONSIDERED AS READY FOR NORMAL WIDESPREAD USE.
32
33They are released early in the spirit of Internet development and to
34make this technology available to innovators who would benefit from
35early exposure.
36
37When we promote the device driver to "beta" level it will be
38considered ready for non-programmer, non-technical users. Until then,
39please be aware that these drivers may not be stable and may affect
40the performance of your system.
41
42
431.1 Latest Additions/Improvements
44
45The 0.3.4 version of the driver is the first GPL release. Several
46features had to be removed from the prior binary only module, mostly
47for reasons of Intellectual Property rights. We can't release
48information that is not ours - so certain aspects of the driver had to
49be removed to protect the rights of others.
50
51Specifically, very old Internet PhoneJACK cards have non-standard
52G.723.1 codecs (due to the early nature of the DSPs in those days).
53The auto-conversion code to bring those cards into compliance with
54todays standards is available as a binary only module to those people
55needing it. If you bought your card after 1997 or so, you are OK -
56it's only the very old cards that are affected.
57
58Also, the code to download G.728/G.729/G.729a codecs to the DSP is
59available as a binary only module as well. This IP is not ours to
60release.
61
62Hooks are built into the GPL driver to allow it to work with other
63companion modules that are completely separate from this module.
64
651.2 Copyright, Trademarks, Disclaimer, & Credits
66
67Copyright
68
69Copyright (c) 1999 Quicknet Technologies, Inc. Permission is granted
70to freely copy and distribute this document provided you preserve it
71in its original form. For corrections and minor changes contact the
72maintainer at linux@quicknet.net.
73
74Trademarks
75
76Internet PhoneJACK and Internet LineJACK are registered trademarks of
77Quicknet Technologies, Inc.
78
79Disclaimer
80
81Much of the info in this HOWTO is early information released by
82Quicknet Technologies, Inc. for the express purpose of allowing early
83testing and use of the Linux drivers developed for their products.
84While every attempt has been made to be thorough, complete and
85accurate, the information contained here may be unreliable and there
86are likely a number of errors in this document. Please let the
87maintainer know about them. Since this is free documentation, it
88should be obvious that neither I nor previous authors can be held
89legally responsible for any errors.
90
91Credits
92
93This HOWTO was written by:
94
95 Greg Herlein <gherlein@quicknet.net>
96 Ed Okerson <eokerson@quicknet.net>
97
981.3 Future Plans: You Can Help
99
100Please let the maintainer know of any errors in facts, opinions,
101logic, spelling, grammar, clarity, links, etc. But first, if the date
102is over a month old, check to see that you have the latest
103version. Please send any info that you think belongs in this document.
104
105You can also contribute code and/or bug-fixes for the sample
106applications.
107
108
1091.4 Where to get things
110
111You can download the latest versions of the driver from:
112
113http://www.quicknet.net/develop.htm
114
115You can download the latest version of this document from:
116
117http://www.quicknet.net/develop.htm
118
119
1201.5 Mailing List
121
122Quicknet operates a mailing list to provide a public forum on using
123these drivers.
124
125To subscribe to the linux-sdk mailing list, send an email to:
126
127 majordomo@linux.quicknet.net
128
129In the body of the email, type:
130
131 subscribe linux-sdk <your-email-address>
132
133Please delete any signature block that you would normally add to the
134bottom of your email - it tends to confuse majordomo.
135
136To send mail to the list, address your mail to
137
138 linux-sdk@linux.quicknet.net
139
140Your message will go out to everyone on the list.
141
142To unsubscribe to the linux-sdk mailing list, send an email to:
143
144 majordomo@linux.quicknet.net
145
146In the body of the email, type:
147
148 unsubscribe linux-sdk <your-email-address>
149
150
151
1522.0 Requirements
153
1542.1 Quicknet Card(s)
155
156You will need at least one Internet PhoneJACK or Internet LineJACK
157cards. These are ISA or PCI bus devices that use Plug-n-Play for
158configuration, and use no IRQs. The driver will support up to 16
159cards in any one system, of any mix between the two types.
160
161Note that you will need two cards to do any useful testing alone, since
162you will need a card on both ends of the connection. Of course, if
163you are doing collaborative work, perhaps your friends or coworkers
164have cards too. If not, we'll gladly sell them some!
165
166
1672.2 ISAPNP
168
169Since the Quicknet cards are Plug-n-Play devices, you will need the
170isapnp tools package to configure the cards, or you can use the isapnp
171module to autoconfigure them. The former package probably came with
172your Linux distribution. Documentation on this package is available
173online at:
174
175http://mailer.wiwi.uni-marburg.de/linux/LDP/HOWTO/Plug-and-Play-HOWTO.html
176
177The isapnp autoconfiguration is available on the Quicknet website at:
178
179 http://www.quicknet.net/develop.htm
180
181though it may be in the kernel by the time you read this.
182
183
1843.0 Card Configuration
185
186If you did not get your drivers as part of the linux kernel, do the
187following to install them:
188
189 a. untar the distribution file. We use the following command:
190 tar -xvzf ixj-0.x.x.tgz
191
192This creates a subdirectory holding all the necessary files. Go to that
193subdirectory.
194
195 b. run the "ixj_dev_create" script to remove any stray device
196files left in the /dev directory, and to create the new officially
197designated device files. Note that the old devices were called
198/dev/ixj, and the new method uses /dev/phone.
199
200 c. type "make;make install" - this will compile and install the
201module.
202
203 d. type "depmod -av" to rebuild all your kernel version dependencies.
204
205 e. if you are using the isapnp module to configure the cards
206 automatically, then skip to step f. Otherwise, ensure that you
207 have run the isapnp configuration utility to properly configure
208 the cards.
209
210 e1. The Internet PhoneJACK has one configuration register that
211 requires 16 IO ports. The Internet LineJACK card has two
212 configuration registers and isapnp reports that IO 0
213 requires 16 IO ports and IO 1 requires 8. The Quicknet
214 driver assumes that these registers are configured to be
215 contiguous, i.e. if IO 0 is set to 0x340 then IO 1 should
216 be set to 0x350.
217
218 Make sure that none of the cards overlap if you have
219 multiple cards in the system.
220
221 If you are new to the isapnp tools, you can jumpstart
222 yourself by doing the following:
223
224 e2. go to the /etc directory and run pnpdump to get a blank
225 isapnp.conf file.
226
227 pnpdump > /etc/isapnp.conf
228
229 e3. edit the /etc/isapnp.conf file to set the IO warnings and
230 the register IO addresses. The IO warnings means that you
231 should find the line in the file that looks like this:
232
233 (CONFLICT (IO FATAL)(IRQ FATAL)(DMA FATAL)(MEM FATAL)) # or WARNING
234
235 and you should edit the line to look like this:
236
237 (CONFLICT (IO WARNING)(IRQ FATAL)(DMA FATAL)(MEM FATAL)) #
238 or WARNING
239
240 The next step is to set the IO port addresses. The issue
241 here is that isapnp does not identify all of the ports out
242 there. Specifically any device that does not have a driver
243 or module loaded by Linux will not be registered. This
244 includes older sound cards and network cards. We have
245 found that the IO port 0x300 is often used even though
246 isapnp claims that no-one is using those ports. We
247 recommend that for a single card installation that port
248 0x340 (and 0x350) be used. The IO port line should change
249 from this:
250
251 (IO 0 (SIZE 16) (BASE 0x0300) (CHECK))
252
253 to this:
254
255 (IO 0 (SIZE 16) (BASE 0x0340) )
256
257 e4. if you have multiple Quicknet cards, make sure that you do
258 not have any overlaps. Be especially careful if you are
259 mixing Internet PhoneJACK and Internet LineJACK cards in
260 the same system. In these cases we recommend moving the
261 IO port addresses to the 0x400 block. Please note that on
262 a few machines the 0x400 series are used. Feel free to
263 experiment with other addresses. Our cards have been
264 proven to work using IO addresses of up to 0xFF0.
265
266 e5. the last step is to uncomment the activation line so the
267 drivers will be associated with the port. This means the
268 line (immediately below) the IO line should go from this:
269
270 # (ACT Y)
271
272 to this:
273
274 (ACT Y)
275
276 Once you have finished editing the isapnp.conf file you
277 must submit it into the pnp driverconfigure the cards.
278 This is done using the following command:
279
280 isapnp isapnp.conf
281
282 If this works you should see a line that identifies the
283 Quicknet device, the IO port(s) chosen, and a message
284 "Enabled OK".
285
286 f. if you are loading the module by hand, use insmod. An example
287of this would look like this:
288
289 insmod phonedev
290 insmod ixj dspio=0x320,0x310 xio=0,0x330
291
292Then verify the module loaded by running lsmod. If you are not using a
293module that matches your kernel version, you may need to "force" the
294load using the -f option in the insmod command.
295
296 insmod phonedev
297 insmod -f ixj dspio=0x320,0x310 xio=0,0x330
298
299
300If you are using isapnp to autoconfigure your card, then you do NOT
301need any of the above, though you need to use depmod to load the
302driver, like this:
303
304 depmod ixj
305
306which will result in the needed drivers getting loaded automatically.
307
308 g. if you are planning on using kerneld to automatically load the
309module for you, then you need to edit /etc/conf.modules and add the
310following lines:
311
312 options ixj dspio=0x340 xio=0x330 ixjdebug=0
313
314If you do this, then when you execute an application that uses the
315module kerneld will load the module for you. Note that to do this,
316you need to have your kernel set to support kerneld. You can check
317for this by looking at /usr/src/linux/.config and you should see this:
318
319 # Loadable module support
320 #
321 <snip>
322 CONFIG_KMOD=y
323
324 h. if you want non-root users to be able to read and write to the
325ixj devices (this is a good idea!) you should do the following:
326
327 - decide upon a group name to use and create that group if
328 needed. Add the user names to that group that you wish to
329 have access to the device. For example, we typically will
330 create a group named "ixj" in /etc/group and add all users
331 to that group that we want to run software that can use the
332 ixjX devices.
333
334 - change the permissions on the device files, like this:
335
336 chgrp ixj /dev/ixj*
337 chmod 660 /dev/ixj*
338
339Once this is done, then non-root users should be able to use the
340devices. If you have enabled autoloading of modules, then the user
341should be able to open the device and have the module loaded
342automatically for them.
343
344
3454.0 Driver Installation problems.
346
347We have tested these drivers on the 2.2.9, 2.2.10, 2.2.12, and 2.2.13 kernels
348and in all cases have eventually been able to get the drivers to load and
349run. We have found four types of problems that prevent this from happening.
350The problems and solutions are:
351
352 a. A step was missed in the installation. Go back and use section 3
353as a checklist. Many people miss running the ixj_dev_create script and thus
354never load the device names into the filesystem.
355
356 b. The kernel is inconsistently linked. We have found this problem in
357the Out Of the Box installation of several distributions. The symptoms
358are that neither driver will load, and that the unknown symbols include "jiffy"
359and "kmalloc". The solution is to recompile both the kernel and the
360modules. The command string for the final compile looks like this:
361
362 In the kernel directory:
363 1. cp .config /tmp
364 2. make mrproper
365 3. cp /tmp/.config .
366 4. make clean;make bzImage;make modules;make modules_install
367
368This rebuilds both the kernel and all the modules and makes sure they all
369have the same linkages. This generally solves the problem once the new
370kernel is installed and the system rebooted.
371
372 c. The kernel has been patched, then unpatched. This happens when
373someone decides to use an earlier kernel after they load a later kernel.
374The symptoms are proceeding through all three above steps and still not
375being able to load the driver. What has happened is that the generated
376header files are out of sync with the kernel itself. The solution is
377to recompile (again) using "make mrproper". This will remove and then
378regenerate all the necessary header files. Once this is done, then you
379need to install and reboot the kernel. We have not seen any problem
380loading one of our drivers after this treatment.
381
3825.0 Known Limitations
383
384We cannot currently play "dial-tone" and listen for DTMF digits at the
385same time using the ISA PhoneJACK. This is a bug in the 8020 DSP chip
386used on that product. All other Quicknet products function normally
387in this regard. We have a work-around, but it's not done yet. Until
388then, if you want dial-tone, you can always play a recorded dial-tone
389sound into the audio until you have gathered the DTMF digits.
390
391
392
393
394
395
396
397
398
399
400
401
402
403
404
405
406