[ALSA] Replace CONFIG_SND_DEBUG_DETECT with CONFIG_SND_DEBUG_VERBOSE

Replace CONFIG_SND_DEBUG_DETECT with CONFIG_SND_DEBUG_VERBOSE to
represent its meaning more better.  This config isn't provided only
for the detection but for more verbose debug prints in general.

Signed-off-by: Takashi Iwai <tiwai@suse.de>

2 files changed, 3 insertions, 3 deletions

diff --git a/Documentation/sound/alsa/ALSA-Configuration.txt b/Documentation/sound/alsa/ALSA-Configuration.txt
index 0bbee38acd26..e59569462cb9 100644
--- a/Documentation/sound/alsa/ALSA-Configuration.txt
+++ b/Documentation/sound/alsa/ALSA-Configuration.txt
@@ -1091,7 +1091,7 @@ Prior to version 0.9.0rc4 options had a 'snd_' prefix. This was removed.
     This occurs when the access to non-existing or non-working codec slot
     (likely a modem one) causes a stall of the communication via HD-audio
     bus.  You can see which codec slots are probed by enabling
-    CONFIG_SND_DEBUG_DETECT, or simply from the file name of the codec
+    CONFIG_SND_DEBUG_VERBOSE, or simply from the file name of the codec
     proc files.  Then limit the slots to probe by probe_mask option.
     For example, probe_mask=1 means to probe only the first slot, and
     probe_mask=4 means only the third slot.
diff --git a/Documentation/sound/alsa/DocBook/writing-an-alsa-driver.tmpl b/Documentation/sound/alsa/DocBook/writing-an-alsa-driver.tmpl
index b03df4d4795c..e13c4e67029f 100644
--- a/Documentation/sound/alsa/DocBook/writing-an-alsa-driver.tmpl
+++ b/Documentation/sound/alsa/DocBook/writing-an-alsa-driver.tmpl
@@ -6127,8 +6127,8 @@ struct _snd_pcm_runtime {
 
       <para>
         <function>snd_printdd()</function> is compiled in only when
-      <constant>CONFIG_SND_DEBUG_DETECT</constant> is set. Please note
-      that <constant>DEBUG_DETECT</constant> is not set as default
+      <constant>CONFIG_SND_DEBUG_VERBOSE</constant> is set. Please note
+      that <constant>CONFIG_SND_DEBUG_VERBOSE</constant> is not set as default
       even if you configure the alsa-driver with
       <option>--with-debug=full</option> option. You need to give
       explicitly <option>--with-debug=detect</option> option instead.