Linux-2.6.12-rc2v2.6.12-rc2

Initial git repository build. I'm not bothering with the full history,
even though we have it. We can create a separate "historical" git
archive of that later if we want to, and in the meantime it's about
3.2GB when imported into git - space that would just make the early
git days unnecessarily complicated, when we don't have a lot of good
infrastructure for it.

Let it rip!

1 files changed, 297 insertions, 0 deletions

diff --git a/Documentation/sound/alsa/OSS-Emulation.txt b/Documentation/sound/alsa/OSS-Emulation.txt
new file mode 100644
index 000000000000..ec2a02541d5b
--- /dev/null
+++ b/Documentation/sound/alsa/OSS-Emulation.txt
@@ -0,0 +1,297 @@
+                NOTES ON KERNEL OSS-EMULATION
+                =============================
+
+                Jan. 22, 2004  Takashi Iwai <tiwai@suse.de>
+
+
+Modules
+=======
+
+ALSA provides a powerful OSS emulation on the kernel.
+The OSS emulation for PCM, mixer and sequencer devices is implemented
+as add-on kernel modules, snd-pcm-oss, snd-mixer-oss and snd-seq-oss.
+When you need to access the OSS PCM, mixer or sequencer devices, the
+corresponding module has to be loaded.
+
+These modules are loaded automatically when the corresponding service
+is called.  The alias is defined sound-service-x-y, where x and y are
+the card number and the minor unit number.  Usually you don't have to
+define these aliases by yourself.
+
+Only necessary step for auto-loading of OSS modules is to define the
+card alias in /etc/modprobe.conf, such as
+
+        alias sound-slot-0 snd-emu10k1
+
+As the second card, define sound-slot-1 as well.
+Note that you can't use the aliased name as the target name (i.e.
+"alias sound-slot-0 snd-card-0" doesn't work any more like the old
+modutils).
+
+The currently available OSS configuration is shown in
+/proc/asound/oss/sndstat.  This shows in the same syntax of
+/dev/sndstat, which is available on the commercial OSS driver.
+On ALSA, you can symlink /dev/sndstat to this proc file.
+
+Please note that the devices listed in this proc file appear only
+after the corresponding OSS-emulation module is loaded.  Don't worry
+even if "NOT ENABLED IN CONFIG" is shown in it.
+
+
+Device Mapping
+==============
+
+ALSA supports the following OSS device files:
+
+        PCM:
+                /dev/dspX
+                /dev/adspX
+
+        Mixer:
+                /dev/mixerX
+
+        MIDI:
+                /dev/midi0X
+                /dev/amidi0X
+
+        Sequencer:
+                /dev/sequencer
+                /dev/sequencer2 (aka /dev/music)
+
+where X is the card number from 0 to 7.
+
+(NOTE: Some distributions have the device files like /dev/midi0 and
+       /dev/midi1.  They are NOT for OSS but for tclmidi, which is
+       a totally different thing.)
+
+Unlike the real OSS, ALSA cannot use the device files more than the
+assigned ones.  For example, the first card cannot use /dev/dsp1 or
+/dev/dsp2, but only /dev/dsp0 and /dev/adsp0.
+
+As seen above, PCM and MIDI may have two devices.  Usually, the first
+PCM device (hw:0,0 in ALSA) is mapped to /dev/dsp and the secondary
+device (hw:0,1) to /dev/adsp (if available).  For MIDI, /dev/midi and
+/dev/amidi, respectively.
+
+You can change this device mapping via the module options of
+snd-pcm-oss and snd-rawmidi.  In the case of PCM, the following
+options are available for snd-pcm-oss:
+
+        dsp_map         PCM device number assigned to /dev/dspX
+                        (default = 0)
+        adsp_map        PCM device number assigned to /dev/adspX
+                        (default = 1)
+
+For example, to map the third PCM device (hw:0,2) to /dev/adsp0,
+define like this:
+
+        options snd-pcm-oss adsp_map=2
+
+The options take arrays.  For configuring the second card, specify
+two entries separated by comma.  For example, to map the third PCM
+device on the second card to /dev/adsp1, define like below:
+
+        options snd-pcm-oss adsp_map=0,2
+
+To change the mapping of MIDI devices, the following options are
+available for snd-rawmidi:
+
+        midi_map        MIDI device number assigned to /dev/midi0X
+                        (default = 0)
+        amidi_map       MIDI device number assigned to /dev/amidi0X
+                        (default = 1)
+
+For example, to assign the third MIDI device on the first card to
+/dev/midi00, define as follows:
+
+        options snd-rawmidi midi_map=2
+
+
+PCM Mode
+========
+
+As default, ALSA emulates the OSS PCM with so-called plugin layer,
+i.e. tries to convert the sample format, rate or channels
+automatically when the card doesn't support it natively.
+This will lead to some problems for some applications like quake or
+wine, especially if they use the card only in the MMAP mode.
+
+In such a case, you can change the behavior of PCM per application by
+writing a command to the proc file.  There is a proc file for each PCM
+stream, /proc/asound/cardX/pcmY[cp]/oss, where X is the card number
+(zero-based), Y the PCM device number (zero-based), and 'p' is for
+playback and 'c' for capture, respectively.  Note that this proc file
+exists only after snd-pcm-oss module is loaded.
+
+The command sequence has the following syntax:
+
+        app_name fragments fragment_size [options]
+
+app_name is the name of application with (higher priority) or without
+path.
+fragments specifies the number of fragments or zero if no specific
+number is given.
+fragment_size is the size of fragment in bytes or zero if not given.
+options is the optional parameters.  The following options are
+available:
+
+        disable         the application tries to open a pcm device for
+                        this channel but does not want to use it.
+        direct          don't use plugins
+        block           force block open mode
+        non-block       force non-block open mode
+        partial-frag    write also partial fragments (affects playback only)
+        no-silence      do not fill silence ahead to avoid clicks
+
+The disable option is useful when one stream direction (playback or
+capture) is not handled correctly by the application although the
+hardware itself does support both directions.
+The direct option is used, as mentioned above, to bypass the automatic
+conversion and useful for MMAP-applications.
+For example, to playback the first PCM device without plugins for
+quake, send a command via echo like the following:
+
+        % echo "quake 0 0 direct" > /proc/asound/card0/pcm0p/oss
+
+While quake wants only playback, you may append the second command
+to notify driver that only this direction is about to be allocated:
+
+        % echo "quake 0 0 disable" > /proc/asound/card0/pcm0c/oss
+
+The permission of proc files depend on the module options of snd.
+As default it's set as root, so you'll likely need to be superuser for
+sending the command above.
+
+The block and non-block options are used to change the behavior of
+opening the device file.
+
+As default, ALSA behaves as original OSS drivers, i.e. does not block
+the file when it's busy. The -EBUSY error is returned in this case.
+
+This blocking behavior can be changed globally via nonblock_open
+module option of snd-pcm-oss.  For using the blocking mode as default
+for OSS devices, define like the following:
+
+        options snd-pcm-oss nonblock_open=0
+
+The partial-frag and no-silence commands have been added recently.
+Both commands are for optimization use only.  The former command
+specifies to invoke the write transfer only when the whole fragment is
+filled.  The latter stops writing the silence data ahead
+automatically.  Both are disabled as default.
+
+You can check the currently defined configuration by reading the proc
+file.  The read image can be sent to the proc file again, hence you
+can save the current configuration
+
+        % cat /proc/asound/card0/pcm0p/oss > /somewhere/oss-cfg
+
+and restore it like
+
+        % cat /somewhere/oss-cfg > /proc/asound/card0/pcm0p/oss
+
+Also, for clearing all the current configuration, send "erase" command
+as below:
+
+        % echo "erase" > /proc/asound/card0/pcm0p/oss
+
+
+Mixer Elements
+==============
+
+Since ALSA has completely different mixer interface, the emulation of
+OSS mixer is relatively complicated.  ALSA builds up a mixer element
+from several different ALSA (mixer) controls based on the name
+string.  For example, the volume element SOUND_MIXER_PCM is composed
+from "PCM Playback Volume" and "PCM Playback Switch" controls for the
+playback direction and from "PCM Capture Volume" and "PCM Capture
+Switch" for the capture directory (if exists).  When the PCM volume of
+OSS is changed, all the volume and switch controls above are adjusted
+automatically.
+
+As default, ALSA uses the following control for OSS volumes:
+
+        OSS volume              ALSA control            Index
+        -----------------------------------------------------
+        SOUND_MIXER_VOLUME      Master                  0
+        SOUND_MIXER_BASS        Tone Control - Bass     0
+        SOUND_MIXER_TREBLE      Tone Control - Treble   0
+        SOUND_MIXER_SYNTH       Synth                   0
+        SOUND_MIXER_PCM         PCM                     0
+        SOUND_MIXER_SPEAKER     PC Speaker              0
+        SOUND_MIXER_LINE        Line                    0
+        SOUND_MIXER_MIC         Mic                     0
+        SOUND_MIXER_CD          CD                      0
+        SOUND_MIXER_IMIX        Monitor Mix             0
+        SOUND_MIXER_ALTPCM      PCM                     1
+        SOUND_MIXER_RECLEV      (not assigned)
+        SOUND_MIXER_IGAIN       Capture                 0
+        SOUND_MIXER_OGAIN       Playback                0
+        SOUND_MIXER_LINE1       Aux                     0
+        SOUND_MIXER_LINE2       Aux                     1
+        SOUND_MIXER_LINE3       Aux                     2
+        SOUND_MIXER_DIGITAL1    Digital                 0
+        SOUND_MIXER_DIGITAL2    Digital                 1
+        SOUND_MIXER_DIGITAL3    Digital                 2
+        SOUND_MIXER_PHONEIN     Phone                   0
+        SOUND_MIXER_PHONEOUT    Phone                   1
+        SOUND_MIXER_VIDEO       Video                   0
+        SOUND_MIXER_RADIO       Radio                   0
+        SOUND_MIXER_MONITOR     Monitor                 0
+
+The second column is the base-string of the corresponding ALSA
+control.  In fact, the controls with "XXX [Playback|Capture]
+[Volume|Switch]" will be checked in addition.
+
+The current assignment of these mixer elements is listed in the proc
+file, /proc/asound/cardX/oss_mixer, which will be like the following
+
+        VOLUME "Master" 0
+        BASS "" 0
+        TREBLE "" 0
+        SYNTH "" 0
+        PCM "PCM" 0
+        ...
+
+where the first column is the OSS volume element, the second column
+the base-string of the corresponding ALSA control, and the third the
+control index.  When the string is empty, it means that the
+corresponding OSS control is not available.
+
+For changing the assignment, you can write the configuration to this
+proc file.  For example, to map "Wave Playback" to the PCM volume,
+send the command like the following:
+
+        % echo 'VOLUME "Wave Playback" 0' > /proc/asound/card0/oss_mixer
+
+The command is exactly as same as listed in the proc file.  You can
+change one or more elements, one volume per line.  In the last
+example, both "Wave Playback Volume" and "Wave Playback Switch" will
+be affected when PCM volume is changed.
+
+Like the case of PCM proc file, the permission of proc files depend on
+the module options of snd.  you'll likely need to be superuser for
+sending the command above.
+
+As well as in the case of PCM proc file, you can save and restore the
+current mixer configuration by reading and writing the whole file
+image.
+
+
+Unsupported Features
+====================
+
+MMAP on ICE1712 driver
+----------------------
+ICE1712 supports only the unconventional format, interleaved
+10-channels 24bit (packed in 32bit) format.  Therefore you cannot mmap
+the buffer as the conventional (mono or 2-channels, 8 or 16bit) format
+on OSS.
+
+USB devices
+-----------
+Some USB devices support only 24bit format packed in 3bytes.  This
+format is not supported by OSS and no conversion is provided by kernel
+OSS emulation.  You can use the user-space OSS emulation via libaoss
+instead.
+