Merge branch 'for-linus2' of git://git.profusion.mobi/users/lucas/linux-2.6

* 'for-linus2' of git://git.profusion.mobi/users/lucas/linux-2.6:
  Fix common misspellings

10 files changed, 24 insertions, 24 deletions

diff --git a/Documentation/scsi/ChangeLog.lpfc b/Documentation/scsi/ChangeLog.lpfc
index 5e83769c6aa9..c56ec99d7b2f 100644
--- a/Documentation/scsi/ChangeLog.lpfc
+++ b/Documentation/scsi/ChangeLog.lpfc
@@ -352,7 +352,7 @@ Changes from 20041229 to 20050110
           lpfc_scsiport.c
         * In remote port changes: no longer nulling target->pnode when
           removing from mapped list. Pnode get nulled when the node is
-          freed (after nodev tmo). This bug was causing i/o recieved in
+          freed (after nodev tmo). This bug was causing i/o received in
           the small window while the device was blocked to be errored w/
           did_no_connect. With the fix, it returns host_busy
           (per the pre-remote port changes).
@@ -530,7 +530,7 @@ Changes from 20041018 to 20041123
           coherent mappings.  Note: There are more consistent mappings
           that are using pci_dma_sync calls. Probably these should be
           removed as well.
-        * Modified lpfc_free_scsi_buf to accomodate all three scsi_buf
+        * Modified lpfc_free_scsi_buf to accommodate all three scsi_buf
           free types to alleviate miscellaneous panics with cable pull
           testing.
         * Set hotplug to default 0 and lpfc_target_remove to not remove
@@ -583,7 +583,7 @@ Changes from 20041018 to 20041123
           included more than once.
         * Replaced "set_current_state(TASK_UNINTERRUPTIBLE);
           schedule_timeout(timeout)" with "msleep(timeout)".
-        * Fixnode was loosing starget when rediscovered. We saw messages
+        * Fixnode was losing starget when rediscovered. We saw messages
           like: lpfc 0000:04:02.0: 0:0263 Cannot block scsi target as a
           result.  Moved starget field into struct lpfc_target which is
           referenced from the node.
@@ -604,7 +604,7 @@ Changes from 20041018 to 20041123
         * Make 3 functions static: lpfc_get_hba_sym_node_name,
           lpfc_intr_prep and lpfc_setup_slim_access.  Move lpfc_intr_prep
           and lpfc_setup_slim_access so they're defined before being used.
-        * Remove an unecessary list_del() in lpfc_hbadisc.c.
+        * Remove an unnecessary list_del() in lpfc_hbadisc.c.
         * Set nlp_state before calling lpfc_nlp_list() since this will
           potentially call fc_target_unblock which may cause a race in
           queuecommand by releasing host_lock.
@@ -753,7 +753,7 @@ Changes from 20040908 to 20040920
         * Changed version number to 8.0.12
         * Removed used #defines: DEFAULT_PCI_LATENCY_CLOCKS and
           PCI_LATENCY_VALUE from lpfc_hw.h.
-        * Changes to accomodate rnid.
+        * Changes to accommodate rnid.
         * Fix RSCN handling so RSCN NS queries only effect NPorts found in
           RSCN data.
         * If we rcv a plogi on a NPort queued up for discovery, clear the
@@ -813,7 +813,7 @@ Changes from 20040908 to 20040920
           counter instead, brd_no isn't reused anymore.  Also some tiny
           whitespace cleanups in surrounding code.
         * Reorder functions in lpfc_els.c to remove need for prototypes.
-        * Removed unsed prototypes from lpfc_crtn.h -
+        * Removed unused prototypes from lpfc_crtn.h -
           lpfc_ip_timeout_handler, lpfc_read_pci and lpfc_revoke.
         * Removed some unused prototypes from lpfc_crtn.h -
           lpfc_scsi_hba_reset, lpfc_scsi_issue_inqsn,
@@ -863,7 +863,7 @@ Changes from 20040823 to 20040908
         * Minimal support for SCSI flat space addressing/volume set
           addressing.  Use 16 bits of LUN address so that flat
           addressing/VSA will work.
-        * Changed 2 occurences of if( 1 != f(x)) to if(f(x) != 1)
+        * Changed 2 occurrences of if( 1 != f(x)) to if(f(x) != 1)
         * Drop include of lpfc_cfgparm.h.
         * Reduce stack usage of lpfc_fdmi_cmd in lpfc_ct.c.
         * Add minimum range checking property to /sys write/store
@@ -1449,7 +1449,7 @@ Changes from 20040402 to 20040409
         * Removed lpfc_els_chk_latt from the lpfc_config_post function.
           lpfc_els_chk_latt will enable the link event interrupts when
           flogi is pending which causes two discovery state machines
-          running parallely.
+          running parallelly.
         * Add pci_disable_device to unload path.
         * Move lpfc_sleep_event from lpfc_fcp.c to lpfc_util_ioctl.c
         * Call dma_map_single() & pci_map_single() directly instead of via
@@ -1590,7 +1590,7 @@ Changes from 20040326 to 20040402
           ELX_WRITE_HS ELX_WRITE_HA ELX_WRITE_CA ELX_READ_HC
           ELX_READ_HS ELX_READ_HA ELX_READ_CA ELX_READ_MB ELX_RESET
           ELX_READ_HBA ELX_INSTANCE ELX_LIP.  Also introduced
-          attribute "set" to be used in conjuction with the above
+          attribute "set" to be used in conjunction with the above
           attributes.
         * Removed DLINK, enque and deque declarations now that clock
           doesn't use them anymore
diff --git a/Documentation/scsi/ChangeLog.megaraid b/Documentation/scsi/ChangeLog.megaraid
index 5e07d320817d..d2052fdbedd2 100644
--- a/Documentation/scsi/ChangeLog.megaraid
+++ b/Documentation/scsi/ChangeLog.megaraid
@@ -168,7 +168,7 @@ Older Version	: 2.20.4.6 (scsi module), 2.20.2.6 (cmm module)
 
 1.      Sorted out PCI IDs to remove megaraid support overlaps.
         Based on the patch from Daniel, sorted out PCI IDs along with
-        charactor node name change from 'megadev' to 'megadev_legacy' to avoid
+        character node name change from 'megadev' to 'megadev_legacy' to avoid
         conflict.
         ---
         Hopefully we'll be getting the build restriction zapped much sooner, 
diff --git a/Documentation/scsi/ChangeLog.ncr53c8xx b/Documentation/scsi/ChangeLog.ncr53c8xx
index 8b278c10edfd..9288e3d8974a 100644
--- a/Documentation/scsi/ChangeLog.ncr53c8xx
+++ b/Documentation/scsi/ChangeLog.ncr53c8xx
@@ -200,7 +200,7 @@ Sun Feb  14:00 1999 Gerard Roudier (groudier@club-internet.fr)
           By default the driver uses both IRQF_SHARED and IRQF_DISABLED.
           Option 'ncr53c8xx=irqm:0x20' may be used when an IRQ is shared by 
           a 53C8XX adapter and a network board.
-        - Tiny mispelling fixed (ABORT instead of ABRT). Was fortunately 
+        - Tiny misspelling fixed (ABORT instead of ABRT). Was fortunately 
           harmless.
         - Negotiate SYNC data transfers with CCS devices.
 
diff --git a/Documentation/scsi/ChangeLog.sym53c8xx b/Documentation/scsi/ChangeLog.sym53c8xx
index 02ffbc1e8a84..c1933707d0bc 100644
--- a/Documentation/scsi/ChangeLog.sym53c8xx
+++ b/Documentation/scsi/ChangeLog.sym53c8xx
@@ -457,7 +457,7 @@ Fri Jan  1  20:00 1999 Gerard Roudier (groudier@club-internet.fr)
 Sat Dec 19  21:00 1998 Gerard Roudier (groudier@club-internet.fr)
         * version sym53c8xx-1.0
         - Define some new IO registers for the 896 (istat1, mbox0, mbox1)
-        - Revamp slighly the Symbios NVRAM lay-out based on the excerpt of 
+        - Revamp slightly the Symbios NVRAM lay-out based on the excerpt of 
           the header file I received from Symbios.
         - Check the PCI bus number for the boot order (Using a fast 
           PCI controller behing a PCI-PCI bridge seems sub-optimal).
diff --git a/Documentation/scsi/aha152x.txt b/Documentation/scsi/aha152x.txt
index 29ce6d87e451..94848734ac66 100644
--- a/Documentation/scsi/aha152x.txt
+++ b/Documentation/scsi/aha152x.txt
@@ -124,7 +124,7 @@ in the partition table and therefore every operating system has to know
 the right geometry to be able to interpret it.
 
 Moreover there are certain limitations to the C/H/S addressing scheme,
-namely the address space is limited to upto 255 heads, upto 63 sectors
+namely the address space is limited to up to 255 heads, up to 63 sectors
 and a maximum of 1023 cylinders.
 
 The AHA-1522 BIOS calculates the geometry by fixing the number of heads
diff --git a/Documentation/scsi/aic79xx.txt b/Documentation/scsi/aic79xx.txt
index 16e054c9c70b..64ac7093c872 100644
--- a/Documentation/scsi/aic79xx.txt
+++ b/Documentation/scsi/aic79xx.txt
@@ -267,7 +267,7 @@ The following information is available in this file:
               Option: tag_info:{{value[,value...]}[,{value[,value...]}...]}
           Definition: Set the per-target tagged queue depth on a
                       per controller basis.  Both controllers and targets
-                      may be ommitted indicating that they should retain
+                      may be omitted indicating that they should retain
                       the default tag depth.
             Examples: tag_info:{{16,32,32,64,8,8,,32,32,32,32,32,32,32,32,32}
                         On Controller 0
@@ -291,7 +291,7 @@ The following information is available in this file:
                       The rd_strm_bitmask is a 16 bit hex value in which
                       each bit represents a target.  Setting the target's
                       bit to '1' enables read streaming for that
-                      target.  Controllers may be ommitted indicating that
+                      target.  Controllers may be omitted indicating that
                       they should retain the default read streaming setting.
              Example: rd_strm:{0x0041}
                         On Controller 0
@@ -313,7 +313,7 @@ The following information is available in this file:
    -----------------------------------------------------------------
               Option: dv: {value[,value...]}
           Definition: Set Domain Validation Policy on a per-controller basis.
-                      Controllers may be ommitted indicating that
+                      Controllers may be omitted indicating that
                       they should retain the default read streaming setting.
              Example: dv:{-1,0,,1,1,0}
                         On Controller 0 leave DV at its default setting.
@@ -340,7 +340,7 @@ The following information is available in this file:
               Option: precomp: {value[,value...]}
           Definition: Set IO Cell precompensation value on a per-controller
                       basis.
-                      Controllers may be ommitted indicating that
+                      Controllers may be omitted indicating that
                       they should retain the default precompensation setting.
              Example: precomp:{0x1}
                         On Controller 0 set precompensation to 1.
@@ -353,7 +353,7 @@ The following information is available in this file:
    -----------------------------------------------------------------
               Option: slewrate: {value[,value...]}
           Definition: Set IO Cell slew rate on a per-controller basis.
-                      Controllers may be ommitted indicating that
+                      Controllers may be omitted indicating that
                       they should retain the default slew rate setting.
              Example: slewrate:{0x1}
                         On Controller 0 set slew rate to 1.
@@ -366,7 +366,7 @@ The following information is available in this file:
    -----------------------------------------------------------------
               Option: amplitude: {value[,value...]}
           Definition: Set IO Cell signal amplitude on a per-controller basis.
-                      Controllers may be ommitted indicating that
+                      Controllers may be omitted indicating that
                       they should retain the default read streaming setting.
              Example: amplitude:{0x1}
                         On Controller 0 set amplitude to 1.
diff --git a/Documentation/scsi/ibmmca.txt b/Documentation/scsi/ibmmca.txt
index 45d61ad8c6f7..ac41a9fcac77 100644
--- a/Documentation/scsi/ibmmca.txt
+++ b/Documentation/scsi/ibmmca.txt
@@ -303,7 +303,7 @@
    (scb) and calls a local function issue_cmd(), which writes a scb 
    command into subsystem I/O ports. Once the scb command is carried out, 
    the interrupt_handler() is invoked. If a device is determined to be 
-   existant and it has not assigned any ldn, it gets one dynamically.
+   existent and it has not assigned any ldn, it gets one dynamically.
    For this, the whole stuff is done in ibmmca_queuecommand().
 
    2.6 Abort & Reset Commands
@@ -741,7 +741,7 @@
       some error appeared, else it is undefined. Now, this is fixed. Before
       any SCB command gets queued, the tsb.dev_status is set to 0, so the 
       cmd->result won't screw up Linux higher level drivers.
-   2) The reset-function has slightly improved. This is still planed for 
+   2) The reset-function has slightly improved. This is still planned for 
       abort. During the abort and the reset function, no interrupts are 
       allowed. This is however quite hard to cope with, so the INT-status
       register is read. When the interrupt gets queued, one can find its
diff --git a/Documentation/scsi/scsi-changer.txt b/Documentation/scsi/scsi-changer.txt
index 032399b16a53..ade046ea7c17 100644
--- a/Documentation/scsi/scsi-changer.txt
+++ b/Documentation/scsi/scsi-changer.txt
@@ -102,7 +102,7 @@ Trouble?
 
 If you insmod the driver with "insmod debug=1", it will be verbose and
 prints a lot of stuff to the syslog.  Compiling the kernel with
-CONFIG_SCSI_CONSTANTS=y improves the quality of the error messages alot
+CONFIG_SCSI_CONSTANTS=y improves the quality of the error messages a lot
 because the kernel will translate the error codes into human-readable
 strings then.
 
diff --git a/Documentation/scsi/scsi_eh.txt b/Documentation/scsi/scsi_eh.txt
index 7acbebb17fa6..6ff16b620d84 100644
--- a/Documentation/scsi/scsi_eh.txt
+++ b/Documentation/scsi/scsi_eh.txt
@@ -290,7 +290,7 @@ scmd->allowed.
         SCSI transports/LLDDs automatically acquire sense data on
         command failures (autosense).  Autosense is recommended for
         performance reasons and as sense information could get out of
-        sync inbetween occurrence of CHECK CONDITION and this action.
+        sync between occurrence of CHECK CONDITION and this action.
 
         Note that if autosense is not supported, scmd->sense_buffer
         contains invalid sense data when error-completing the scmd
diff --git a/Documentation/scsi/scsi_fc_transport.txt b/Documentation/scsi/scsi_fc_transport.txt
index e00192de4d1c..f79282fc48d7 100644
--- a/Documentation/scsi/scsi_fc_transport.txt
+++ b/Documentation/scsi/scsi_fc_transport.txt
@@ -291,7 +291,7 @@ Transport <-> LLDD Interfaces :
 Vport support by LLDD:
 
   The LLDD indicates support for vports by supplying a vport_create()
-  function in the transport template.  The presense of this function will
+  function in the transport template.  The presence of this function will
   cause the creation of the new attributes on the fc_host.  As part of
   the physical port completing its initialization relative to the
   transport, it should set the max_npiv_vports attribute to indicate the