Merge branch 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/djbw/async_tx

* 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/djbw/async_tx:
  ppc440spe-adma: adds updated ppc440spe adma driver
  iop-adma.c: use resource_size()
  dmaengine: clarify the meaning of the DMA_CTRL_ACK flag
  sh: stylistic improvements for the DMA driver
  dmaengine: fix dmatest to verify minimum transfer length and test buffer size
  sh: DMA driver has to specify its alignment requirements
  Add COH 901 318 DMA block driver v5

1 files changed, 93 insertions, 0 deletions

diff --git a/Documentation/powerpc/dts-bindings/4xx/ppc440spe-adma.txt b/Documentation/powerpc/dts-bindings/4xx/ppc440spe-adma.txt
new file mode 100644
index 000000000000..515ebcf1b97d
--- /dev/null
+++ b/Documentation/powerpc/dts-bindings/4xx/ppc440spe-adma.txt
@@ -0,0 +1,93 @@
+PPC440SPe DMA/XOR (DMA Controller and XOR Accelerator)
+
+Device nodes needed for operation of the ppc440spe-adma driver
+are specified hereby. These are I2O/DMA, DMA and XOR nodes
+for DMA engines and Memory Queue Module node. The latter is used
+by ADMA driver for configuration of RAID-6 H/W capabilities of
+the PPC440SPe. In addition to the nodes and properties described
+below, the ranges property of PLB node must specify ranges for
+DMA devices.
+
+ i) The I2O node
+
+ Required properties:
+
+ - compatible           : "ibm,i2o-440spe";
+ - reg                  : <registers mapping>
+ - dcr-reg              : <DCR registers range>
+
+ Example:
+
+        I2O: i2o@400100000 {
+                compatible = "ibm,i2o-440spe";
+                reg = <0x00000004 0x00100000 0x100>;
+                dcr-reg = <0x060 0x020>;
+        };
+
+
+ ii) The DMA node
+
+ Required properties:
+
+ - compatible           : "ibm,dma-440spe";
+ - cell-index           : 1 cell, hardware index of the DMA engine
+                          (typically 0x0 and 0x1 for DMA0 and DMA1)
+ - reg                  : <registers mapping>
+ - dcr-reg              : <DCR registers range>
+ - interrupts           : <interrupt mapping for DMA0/1 interrupts sources:
+                           2 sources: DMAx CS FIFO Needs Service IRQ (on UIC0)
+                           and DMA Error IRQ (on UIC1). The latter is common
+                           for both DMA engines>.
+ - interrupt-parent     : needed for interrupt mapping
+
+ Example:
+
+        DMA0: dma0@400100100 {
+                compatible = "ibm,dma-440spe";
+                cell-index = <0>;
+                reg = <0x00000004 0x00100100 0x100>;
+                dcr-reg = <0x060 0x020>;
+                interrupt-parent = <&DMA0>;
+                interrupts = <0 1>;
+                #interrupt-cells = <1>;
+                #address-cells = <0>;
+                #size-cells = <0>;
+                interrupt-map = <
+                        0 &UIC0 0x14 4
+                        1 &UIC1 0x16 4>;
+        };
+
+
+ iii) XOR Accelerator node
+
+ Required properties:
+
+ - compatible           : "amcc,xor-accelerator";
+ - reg                  : <registers mapping>
+ - interrupts           : <interrupt mapping for XOR interrupt source>
+ - interrupt-parent     : for interrupt mapping
+
+ Example:
+
+        xor-accel@400200000 {
+                compatible = "amcc,xor-accelerator";
+                reg = <0x00000004 0x00200000 0x400>;
+                interrupt-parent = <&UIC1>;
+                interrupts = <0x1f 4>;
+        };
+
+
+ iv) Memory Queue Module node
+
+ Required properties:
+
+ - compatible           : "ibm,mq-440spe";
+ - dcr-reg              : <DCR registers range>
+
+ Example:
+
+        MQ0: mq {
+                compatible = "ibm,mq-440spe";
+                dcr-reg = <0x040 0x020>;
+        };
+