tokenring: delete all remaining driver support

This represents the mass deletion of the of the tokenring support.

It gets rid of:
  - the net/tr.c which the drivers depended on
  - the drivers/net component
  - the Kbuild infrastructure around it
  - any tokenring related CONFIG_ settings in any defconfigs
  - the tokenring headers in the include/linux dir
  - the firmware associated with the tokenring drivers.
  - any associated token ring documentation.

Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>

5 files changed, 0 insertions, 358 deletions

diff --git a/Documentation/networking/00-INDEX b/Documentation/networking/00-INDEX
index 9ad9ddeb384c..2cc3c7733a2f 100644
--- a/Documentation/networking/00-INDEX
+++ b/Documentation/networking/00-INDEX
@@ -1,7 +1,5 @@
 00-INDEX
         - this file
-3c359.txt
-        - information on the 3Com TokenLink Velocity XL (3c5359) driver.
 3c505.txt
         - information on the 3Com EtherLink Plus (3c505) driver.
 3c509.txt
@@ -142,8 +140,6 @@ netif-msg.txt
         - Design of the network interface message level setting (NETIF_MSG_*).
 nfc.txt
         - The Linux Near Field Communication (NFS) subsystem.
-olympic.txt
-        - IBM PCI Pit/Pit-Phy/Olympic Token Ring driver info.
 openvswitch.txt
         - Open vSwitch developer documentation.
 operstates.txt
@@ -184,8 +180,6 @@ skfp.txt
         - SysKonnect FDDI (SK-5xxx, Compaq Netelligent) driver info.
 smc9.txt
         - the driver for SMC's 9000 series of Ethernet cards
-smctr.txt
-        - SMC TokenCard TokenRing Linux driver info.
 spider-net.txt
         - README for the Spidernet Driver (as found in PS3 / Cell BE).
 stmmac.txt
@@ -200,8 +194,6 @@ tcp-thin.txt
         - kernel tuning options for low rate 'thin' TCP streams.
 tlan.txt
         - ThunderLAN (Compaq Netelligent 10/100, Olicom OC-2xxx) driver info.
-tms380tr.txt
-        - SysKonnect Token Ring ISA/PCI adapter driver info.
 tproxy.txt
         - Transparent proxy support user guide.
 tuntap.txt
diff --git a/Documentation/networking/3c359.txt b/Documentation/networking/3c359.txt
deleted file mode 100644
index dadfe8147ab8..000000000000
--- a/Documentation/networking/3c359.txt
+++ /dev/null
@@ -1,58 +0,0 @@
-
-3COM PCI TOKEN LINK VELOCITY XL TOKEN RING CARDS README
-
-Release 0.9.0 - Release   
-        Jul 17th 2000 Mike Phillips 
-
-        1.2.0 - Final
-        Feb 17th 2002 Mike Phillips 
-        Updated for submission to the 2.4.x kernel.
-
-Thanks:
-        Terry Murphy from 3Com for tech docs and support,
-        Adam D. Ligas for testing the driver.
- 
-Note:
-        This driver will NOT work with the 3C339 Token Ring cards, you need
-to use the tms380 driver instead.
-
-Options:
-
-The driver accepts three options: ringspeed, pkt_buf_sz and message_level.
-
-These options can be specified differently for each card found. 
-
-ringspeed:  Has one of three settings 0 (default), 4 or 16.  0 will 
-make the card autosense the ringspeed and join at the appropriate speed, 
-this will be the default option for most people.  4 or 16 allow you to 
-explicitly force the card to operate at a certain speed.  The card will fail 
-if you try to insert it at the wrong speed. (Although some hubs will allow 
-this so be *very* careful).  The main purpose for explicitly setting the ring
-speed is for when the card is first on the ring.  In autosense mode, if the card
-cannot detect any active monitors on the ring it will open at the same speed as
-its last opening. This can be hazardous if this speed does not match the speed
-you want the ring to operate at.  
-
-pkt_buf_sz:  This is this initial receive buffer allocation size.  This will
-default to 4096 if no value is entered. You may increase performance of the 
-driver by setting this to a value larger than the network packet size, although
-the driver now re-sizes buffers based on MTU settings as well. 
-
-message_level: Controls level of messages created by the driver. Defaults to 0:
-which only displays start-up and critical messages.  Presently any non-zero 
-value will display all soft messages as well.  NB This does not turn 
-debugging messages on, that must be done by modified the source code.
-
-Variable MTU size:
-
-The driver can handle a MTU size up to either 4500 or 18000 depending upon 
-ring speed.  The driver also changes the size of the receive buffers as part
-of the mtu re-sizing, so if you set mtu = 18000, you will need to be able
-to allocate 16 * (sk_buff with 18000 buffer size) call it 18500 bytes per ring 
-position = 296,000 bytes of memory space, plus of course anything 
-necessary for the tx sk_buff's.  Remember this is per card, so if you are
-building routers, gateway's etc, you could start to use a lot of memory
-real fast.
-
-2/17/02 Mike Phillips
-
diff --git a/Documentation/networking/olympic.txt b/Documentation/networking/olympic.txt
deleted file mode 100644
index b95b5bf96751..000000000000
--- a/Documentation/networking/olympic.txt
+++ /dev/null
@@ -1,79 +0,0 @@
-
-IBM PCI Pit/Pit-Phy/Olympic CHIPSET BASED TOKEN RING CARDS README
-
-Release 0.2.0 - Release    
-        June 8th 1999 Peter De Schrijver & Mike Phillips
-Release 0.9.C - Release
-        April 18th 2001 Mike Phillips
-
-Thanks:
-Erik De Cock, Adrian Bridgett and Frank Fiene for their 
-patience and testing.
-Donald Champion for the cardbus support
-Kyle Lucke for the dma api changes.   
-Jonathon Bitner for hardware support. 
-Everybody on linux-tr for their continued support.  
- 
-Options:
-
-The driver accepts four options: ringspeed, pkt_buf_sz,  
-message_level and network_monitor.
-
-These options can be specified differently for each card found. 
-
-ringspeed:  Has one of three settings 0 (default), 4 or 16.  0 will 
-make the card autosense the ringspeed and join at the appropriate speed, 
-this will be the default option for most people.  4 or 16 allow you to 
-explicitly force the card to operate at a certain speed.  The card will fail 
-if you try to insert it at the wrong speed. (Although some hubs will allow 
-this so be *very* careful).  The main purpose for explicitly setting the ring
-speed is for when the card is first on the ring.  In autosense mode, if the card
-cannot detect any active monitors on the ring it will not open, so you must 
-re-init the card at the appropriate speed.  Unfortunately at present the only
-way of doing this is rmmod and insmod which is a bit tough if it is compiled
-in the kernel.
-
-pkt_buf_sz:  This is this initial receive buffer allocation size.  This will
-default to 4096 if no value is entered. You may increase performance of the 
-driver by setting this to a value larger than the network packet size, although
-the driver now re-sizes buffers based on MTU settings as well. 
-
-message_level: Controls level of messages created by the driver. Defaults to 0:
-which only displays start-up and critical messages.  Presently any non-zero 
-value will display all soft messages as well.  NB This does not turn 
-debugging messages on, that must be done by modified the source code.
-
-network_monitor: Any non-zero value will provide a quasi network monitoring 
-mode.  All unexpected MAC frames (beaconing etc.) will be received
-by the driver and the source and destination addresses printed. 
-Also an entry will be added in  /proc/net called olympic_tr%d, where tr%d
-is the registered device name, i.e tr0, tr1, etc. This displays low
-level information about the configuration of the ring and the adapter.
-This feature has been designed for network administrators to assist in 
-the diagnosis of network / ring problems. (This used to OLYMPIC_NETWORK_MONITOR,
-but has now changed to allow each adapter to be configured differently and
-to alleviate the necessity to re-compile olympic to turn the option on).
-
-Multi-card:
-
-The driver will detect multiple cards and will work with shared interrupts,
-each card is assigned the next token ring device, i.e. tr0 , tr1, tr2.  The 
-driver should also happily reside in the system with other drivers.  It has 
-been tested with ibmtr.c running, and I personally have had one Olicom PCI 
-card and two IBM olympic cards (all on the same interrupt), all running
-together. 
-
-Variable MTU size:
-
-The driver can handle a MTU size up to either 4500 or 18000 depending upon 
-ring speed.  The driver also changes the size of the receive buffers as part
-of the mtu re-sizing, so if you set mtu = 18000, you will need to be able
-to allocate 16 * (sk_buff with 18000 buffer size) call it 18500 bytes per ring 
-position = 296,000 bytes of memory space, plus of course anything 
-necessary for the tx sk_buff's.  Remember this is per card, so if you are
-building routers, gateway's etc, you could start to use a lot of memory
-real fast.
-
-
-6/8/99 Peter De Schrijver and Mike Phillips
-
diff --git a/Documentation/networking/smctr.txt b/Documentation/networking/smctr.txt
deleted file mode 100644
index 9af25b810c1f..000000000000
--- a/Documentation/networking/smctr.txt
+++ /dev/null
@@ -1,66 +0,0 @@
-Text File for the SMC TokenCard TokenRing Linux driver (smctr.c).
-        By Jay Schulist <jschlst@samba.org>
-
-The Linux SMC Token Ring driver works with the SMC TokenCard Elite (8115T) 
-ISA and SMC TokenCard Elite/A (8115T/A) MCA adapters.
-
-Latest information on this driver can be obtained on the Linux-SNA WWW site.
-Please point your browser to: http://www.linux-sna.org
-
-This driver is rather simple to use. Select Y to Token Ring adapter support
-in the kernel configuration. A choice for SMC Token Ring adapters will
-appear. This drives supports all SMC ISA/MCA adapters. Choose this
-option. I personally recommend compiling the driver as a module (M), but if you
-you would like to compile it statically answer Y instead.
-
-This driver supports multiple adapters without the need to load multiple copies
-of the driver. You should be able to load up to 7 adapters without any kernel
-modifications, if you are in need of more please contact the maintainer of this
-driver.
-
-Load the driver either by lilo/loadlin or as a module. When a module using the
-following command will suffice for most:
-
-# modprobe smctr
-smctr.c: v1.00 12/6/99 by jschlst@samba.org
-tr0: SMC TokenCard 8115T at Io 0x300, Irq 10, Rom 0xd8000, Ram 0xcc000.
-
-Now just setup the device via ifconfig and set and routes you may have. After
-this you are ready to start sending some tokens.
-
-Errata:
-1). For anyone wondering where to pick up the SMC adapters please browse
-    to http://www.smc.com
-
-2). If you are the first/only Token Ring Client on a Token Ring LAN, please
-    specify the ringspeed with the ringspeed=[4/16] module option. If no
-    ringspeed is specified the driver will attempt to autodetect the ring
-    speed and/or if the adapter is the first/only station on the ring take
-    the appropriate actions. 
-
-    NOTE: Default ring speed is 16MB UTP.
-
-3). PnP support for this adapter sucks. I recommend hard setting the 
-    IO/MEM/IRQ by the jumpers on the adapter. If this is not possible
-    load the module with the following io=[ioaddr] mem=[mem_addr]
-    irq=[irq_num].
-
-    The following IRQ, IO, and MEM settings are supported.
-
-    IO ports:
-    0x200, 0x220, 0x240, 0x260, 0x280, 0x2A0, 0x2C0, 0x2E0, 0x300,
-    0x320, 0x340, 0x360, 0x380.
-
-    IRQs:
-    2, 3, 4, 5, 7, 8, 9, 10, 11, 12, 13, 14, 15
-
-    Memory addresses:
-    0xA0000, 0xA4000, 0xA8000, 0xAC000, 0xB0000, 0xB4000,
-    0xB8000, 0xBC000, 0xC0000, 0xC4000, 0xC8000, 0xCC000,
-    0xD0000, 0xD4000, 0xD8000, 0xDC000, 0xE0000, 0xE4000,
-    0xE8000, 0xEC000, 0xF0000, 0xF4000, 0xF8000, 0xFC000
-
-This driver is under the GNU General Public License. Its Firmware image is
-included as an initialized C-array and is licensed by SMC to the Linux
-users of this driver. However no warranty about its fitness is expressed or
-implied by SMC.
diff --git a/Documentation/networking/tms380tr.txt b/Documentation/networking/tms380tr.txt
deleted file mode 100644
index 1f73e13058df..000000000000
--- a/Documentation/networking/tms380tr.txt
+++ /dev/null
@@ -1,147 +0,0 @@
-Text file for the Linux SysKonnect Token Ring ISA/PCI Adapter Driver.
-        Text file by: Jay Schulist <jschlst@samba.org>
-
-The Linux SysKonnect Token Ring driver works with the SysKonnect TR4/16(+) ISA,
-SysKonnect TR4/16(+) PCI, SysKonnect TR4/16 PCI, and older revisions of the
-SK NET TR4/16 ISA card.
-
-Latest information on this driver can be obtained on the Linux-SNA WWW site.
-Please point your browser to: 
-http://www.linux-sna.org
-
-Many thanks to Christoph Goos for his excellent work on this driver and
-SysKonnect for donating the adapters to Linux-SNA for the testing and 
-maintenance of this device driver.
-
-Important information to be noted:
-1. Adapters can be slow to open (~20 secs) and close (~5 secs), please be 
-   patient.
-2. This driver works very well when autoprobing for adapters. Why even 
-   think about those nasty io/int/dma settings of modprobe when the driver 
-   will do it all for you!
-
-This driver is rather simple to use. Select Y to Token Ring adapter support
-in the kernel configuration. A choice for SysKonnect Token Ring adapters will
-appear. This drives supports all SysKonnect ISA and PCI adapters. Choose this
-option. I personally recommend compiling the driver as a module (M), but if you
-you would like to compile it statically answer Y instead.
-
-This driver supports multiple adapters without the need to load multiple copies
-of the driver. You should be able to load up to 7 adapters without any kernel
-modifications, if you are in need of more please contact the maintainer of this
-driver.
-
-Load the driver either by lilo/loadlin or as a module. When a module using the
-following command will suffice for most:
-
-# modprobe sktr
-
-This will produce output similar to the following: (Output is user specific)
-
-sktr.c: v1.01 08/29/97 by Christoph Goos
-tr0: SK NET TR 4/16 PCI found at 0x6100, using IRQ 17.
-tr1: SK NET TR 4/16 PCI found at 0x6200, using IRQ 16.
-tr2: SK NET TR 4/16 ISA found at 0xa20, using IRQ 10 and DMA 5.
-
-Now just setup the device via ifconfig and set and routes you may have. After
-this you are ready to start sending some tokens.
-
-Errata:
-For anyone wondering where to pick up the SysKonnect adapters please browse
-to http://www.syskonnect.com
-
-This driver is under the GNU General Public License. Its Firmware image is 
-included as an initialized C-array and is licensed by SysKonnect to the Linux 
-users of this driver. However no warranty about its fitness is expressed or 
-implied by SysKonnect.
-
-Below find attached the setting for the SK NET TR 4/16 ISA adapters
--------------------------------------------------------------------
-
-                    ***************************
-                    ***   C O N T E N T S   ***
-                    ***************************
-
-                1) Location of DIP-Switch W1
-                2) Default settings
-                3) DIP-Switch W1 description
-
-
-  ==============================================================
-  CHAPTER 1     LOCATION OF DIP-SWITCH
-  ==============================================================
-
-UÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ¿
-þUÄÄÄÄÄÄ¿                         UÄÄÄÄÄ¿            UÄÄÄ¿         þ
-þAÄÄÄÄÄÄU                      W1 AÄÄÄÄÄU     UÄÄÄÄ¿ þ   þ         þ
-þUÄÄÄÄÄÄ¿                                     þ    þ þ   þ      UÄÄÅ¿
-þAÄÄÄÄÄÄU              UÄÄÄÄÄÄÄÄÄÄÄ¿          AÄÄÄÄU þ   þ      þ  þþ
-þUÄÄÄÄÄÄ¿              þ           þ          UÄÄÄ¿  AÄÄÄU      AÄÄÅU
-þAÄÄÄÄÄÄU              þ TMS380C26 þ          þ   þ                þ
-þUÄÄÄÄÄÄ¿              þ           þ          AÄÄÄU                AÄ¿
-þAÄÄÄÄÄÄU              þ           þ                               þ þ
-þ                      AÄÄÄÄÄÄÄÄÄÄÄU                               þ þ
-þ                                                                  þ þ
-þ                                                                  AÄU
-þ                                                                  þ
-þ                                                                  þ
-þ                                                                  þ
-þ                                                                  þ
-AÄÄÄÄÄÄÄÄÄÄÄÄAÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄAÄÄAÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄAÄÄÄÄÄÄÄÄÄU
-             AÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄU  AÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄU
-
-  ==============================================================
-  CHAPTER 2     DEFAULT SETTINGS
-  ==============================================================
-
-          W1    1  2  3  4  5  6  7  8
-        +------------------------------+
-        | ON    X                      |
-        | OFF      X  X  X  X  X  X  X |
-        +------------------------------+
-
-        W1.1 = ON               Adapter drives address lines SA17..19
-        W1.2 - 1.5 = OFF        BootROM disabled
-        W1.6 - 1.8 = OFF        I/O address 0A20h
-
-  ==============================================================
-  CHAPTER 3     DIP SWITCH W1 DESCRIPTION
-  ==============================================================
-
-      UÄÄÄAÄÄÄAÄÄÄAÄÄÄAÄÄÄAÄÄÄAÄÄÄAÄÄÄ¿  ON
-      þ 1 þ 2 þ 3 þ 4 þ 5 þ 6 þ 7 þ 8 þ
-      AÄÄÄAÄÄÄAÄÄÄAÄÄÄAÄÄÄAÄÄÄAÄÄÄAÄÄÄU  OFF
-      |AD | BootROM Addr. |  I/O      |
-      +-+-+-------+-------+-----+-----+
-        |         |             |
-        |         |             +------ 6     7     8
-        |         |                     ON    ON    ON       1900h
-        |         |                     ON    ON    OFF      0900h
-        |         |                     ON    OFF   ON       1980h
-        |         |                     ON    OFF   OFF      0980h
-        |         |                     OFF   ON    ON       1b20h
-        |         |                     OFF   ON    OFF      0b20h
-        |         |                     OFF   OFF   ON       1a20h
-        |         |                     OFF   OFF   OFF      0a20h    (+)
-        |         |
-        |         |
-        |         +-------- 2     3     4     5
-        |                   OFF   x     x     x       disabled  (+)
-        |                   ON    ON    ON    ON      C0000
-        |                   ON    ON    ON    OFF     C4000
-        |                   ON    ON    OFF   ON      C8000
-        |                   ON    ON    OFF   OFF     CC000
-        |                   ON    OFF   ON    ON      D0000
-        |                   ON    OFF   ON    OFF     D4000
-        |                   ON    OFF   OFF   ON      D8000
-        |                   ON    OFF   OFF   OFF     DC000
-        |
-        |
-        +----- 1
-               OFF    adapter does NOT drive SA<17..19>
-               ON     adapter drives SA<17..19>  (+)
-
-
-        (+) means default setting
-
-                       ********************************