Documentation: consolidate leds files to leds/ subdir

leds: move leds-class documentation under the leds/ subdir.
Add also a leds/00-INDEX file describing the files under leds/

Signed-off-by: Antonio Ospite <ospite@studenti.unina.it>
Acked-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

1 files changed, 0 insertions, 50 deletions

diff --git a/Documentation/leds-lp3944.txt b/Documentation/leds-lp3944.txt
deleted file mode 100644
index c6eda18b15ef..000000000000
--- a/Documentation/leds-lp3944.txt
+++ /dev/null
@@ -1,50 +0,0 @@
-Kernel driver lp3944
-====================
-
-  * National Semiconductor LP3944 Fun-light Chip
-    Prefix: 'lp3944'
-    Addresses scanned: None (see the Notes section below)
-    Datasheet: Publicly available at the National Semiconductor website
-               http://www.national.com/pf/LP/LP3944.html
-
-Authors:
-        Antonio Ospite <ospite@studenti.unina.it>
-
-
-Description
------------
-The LP3944 is a helper chip that can drive up to 8 leds, with two programmable
-DIM modes; it could even be used as a gpio expander but this driver assumes it
-is used as a led controller.
-
-The DIM modes are used to set _blink_ patterns for leds, the pattern is
-specified supplying two parameters:
-  - period: from 0s to 1.6s
-  - duty cycle: percentage of the period the led is on, from 0 to 100
-
-Setting a led in DIM0 or DIM1 mode makes it blink according to the pattern.
-See the datasheet for details.
-
-LP3944 can be found on Motorola A910 smartphone, where it drives the rgb
-leds, the camera flash light and the lcds power.
-
-
-Notes
------
-The chip is used mainly in embedded contexts, so this driver expects it is
-registered using the i2c_board_info mechanism.
-
-To register the chip at address 0x60 on adapter 0, set the platform data
-according to include/linux/leds-lp3944.h, set the i2c board info:
-
-        static struct i2c_board_info __initdata a910_i2c_board_info[] = {
-                {
-                        I2C_BOARD_INFO("lp3944", 0x60),
-                        .platform_data = &a910_lp3944_leds,
-                },
-        };
-
-and register it in the platform init function
-
-        i2c_register_board_info(0, a910_i2c_board_info,
-                        ARRAY_SIZE(a910_i2c_board_info));