Merge branch 'master' of /home/davem/src/GIT/linux-2.6/

Conflicts:
	drivers/firmware/iscsi_ibft.c

1 files changed, 33 insertions, 2 deletions

diff --git a/Documentation/kernel-parameters.txt b/Documentation/kernel-parameters.txt
index 3ca7f8f56525..fbcddc5abe25 100644
--- a/Documentation/kernel-parameters.txt
+++ b/Documentation/kernel-parameters.txt
@@ -200,6 +200,10 @@ and is between 256 and 4096 characters. It is defined in the file
                         acpi_display_output=video
                         See above.
 
+        acpi_early_pdc_eval     [HW,ACPI] Evaluate processor _PDC methods
+                                early. Needed on some platforms to properly
+                                initialize the EC.
+
         acpi_irq_balance [HW,ACPI]
                         ACPI will balance active IRQs
                         default in APIC mode
@@ -312,6 +316,11 @@ and is between 256 and 4096 characters. It is defined in the file
         aic79xx=        [HW,SCSI]
                         See Documentation/scsi/aic79xx.txt.
 
+        alignment=      [KNL,ARM]
+                        Allow the default userspace alignment fault handler
+                        behaviour to be specified.  Bit 0 enables warnings,
+                        bit 1 enables fixups, and bit 2 sends a segfault.
+
         amd_iommu=      [HW,X86-84]
                         Pass parameters to the AMD IOMMU driver in the system.
                         Possible values are:
@@ -1739,6 +1748,9 @@ and is between 256 and 4096 characters. It is defined in the file
         nomfgpt         [X86-32] Disable Multi-Function General Purpose
                         Timer usage (for AMD Geode machines).
 
+        nopat           [X86] Disable PAT (page attribute table extension of
+                        pagetables) support.
+
         norandmaps      Don't use address space randomization.  Equivalent to
                         echo 0 > /proc/sys/kernel/randomize_va_space
 
@@ -1949,8 +1961,12 @@ and is between 256 and 4096 characters. It is defined in the file
                                 IRQ routing is enabled.
                 noacpi          [X86] Do not use ACPI for IRQ routing
                                 or for PCI scanning.
-                use_crs         [X86] Use _CRS for PCI resource
-                                allocation.
+                use_crs         [X86] Use PCI host bridge window information
+                                from ACPI.  On BIOSes from 2008 or later, this
+                                is enabled by default.  If you need to use this,
+                                please report a bug.
+                nocrs           [X86] Ignore PCI host bridge windows from ACPI.
+                                If you need to use this, please report a bug.
                 routeirq        Do IRQ routing for all PCI devices.
                                 This is normally done in pci_enable_device(),
                                 so this option is a temporary workaround
@@ -1999,6 +2015,14 @@ and is between 256 and 4096 characters. It is defined in the file
                 force   Enable ASPM even on devices that claim not to support it.
                         WARNING: Forcing ASPM on may cause system lockups.
 
+        pcie_pme=       [PCIE,PM] Native PCIe PME signaling options:
+                off     Do not use native PCIe PME signaling.
+                force   Use native PCIe PME signaling even if the BIOS refuses
+                        to allow the kernel to control the relevant PCIe config
+                        registers.
+                nomsi   Do not use MSI for native PCIe PME signaling (this makes
+                        all PCIe root ports use INTx for everything).
+
         pcmv=           [HW,PCMCIA] BadgePAD 4
 
         pd.             [PARIDE]
@@ -2704,6 +2728,13 @@ and is between 256 and 4096 characters. It is defined in the file
                                         medium is write-protected).
                         Example: quirks=0419:aaf5:rl,0421:0433:rc
 
+        userpte=
+                        [X86] Flags controlling user PTE allocations.
+
+                                nohigh = do not allocate PTE pages in
+                                        HIGHMEM regardless of setting
+                                        of CONFIG_HIGHPTE.
+
         vdso=           [X86,SH]
                         vdso=2: enable compat VDSO (default with COMPAT_VDSO)
                         vdso=1: enable VDSO (default)