aboutsummaryrefslogtreecommitdiffstats
path: root/Documentation/isdn
diff options
context:
space:
mode:
authorLinus Torvalds <torvalds@ppc970.osdl.org>2005-04-16 18:20:36 -0400
committerLinus Torvalds <torvalds@ppc970.osdl.org>2005-04-16 18:20:36 -0400
commit1da177e4c3f41524e886b7f1b8a0c1fc7321cac2 (patch)
tree0bba044c4ce775e45a88a51686b5d9f90697ea9d /Documentation/isdn
Linux-2.6.12-rc2v2.6.12-rc2
Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
Diffstat (limited to 'Documentation/isdn')
-rw-r--r--Documentation/isdn/00-INDEX43
-rw-r--r--Documentation/isdn/CREDITS70
-rw-r--r--Documentation/isdn/HiSax.cert96
-rw-r--r--Documentation/isdn/INTERFACE759
-rw-r--r--Documentation/isdn/INTERFACE.fax163
-rw-r--r--Documentation/isdn/README599
-rw-r--r--Documentation/isdn/README.FAQ26
-rw-r--r--Documentation/isdn/README.HiSax659
-rw-r--r--Documentation/isdn/README.act2000104
-rw-r--r--Documentation/isdn/README.audio138
-rw-r--r--Documentation/isdn/README.avmb1187
-rw-r--r--Documentation/isdn/README.concap259
-rw-r--r--Documentation/isdn/README.diversion127
-rw-r--r--Documentation/isdn/README.fax45
-rw-r--r--Documentation/isdn/README.hfc-pci41
-rw-r--r--Documentation/isdn/README.hysdn195
-rw-r--r--Documentation/isdn/README.icn148
-rw-r--r--Documentation/isdn/README.pcbit40
-rw-r--r--Documentation/isdn/README.sc281
-rw-r--r--Documentation/isdn/README.syncppp58
-rw-r--r--Documentation/isdn/README.x25184
-rw-r--r--Documentation/isdn/syncPPP.FAQ224
22 files changed, 4446 insertions, 0 deletions
diff --git a/Documentation/isdn/00-INDEX b/Documentation/isdn/00-INDEX
new file mode 100644
index 000000000000..9fee5f2e5c62
--- /dev/null
+++ b/Documentation/isdn/00-INDEX
@@ -0,0 +1,43 @@
100-INDEX
2 - this file (info on ISDN implementation for Linux)
3CREDITS
4 - list of the kind folks that brought you this stuff.
5INTERFACE
6 - description of Linklevel and Hardwarelevel ISDN interface.
7README
8 - general info on what you need and what to do for Linux ISDN.
9README.FAQ
10 - general info for FAQ.
11README.audio
12 - info for running audio over ISDN.
13README.fax
14 - info for using Fax over ISDN.
15README.icn
16 - info on the ICN-ISDN-card and its driver.
17README.HiSax
18 - info on the HiSax driver which replaces the old teles.
19README.hfc-pci
20 - info on hfc-pci based cards.
21README.pcbit
22 - info on the PCBIT-D ISDN adapter and driver.
23README.syncppp
24 - info on running Sync PPP over ISDN.
25syncPPP.FAQ
26 - frequently asked questions about running PPP over ISDN.
27README.avmb1
28 - info on driver for AVM-B1 ISDN card.
29README.act2000
30 - info on driver for IBM ACT-2000 card.
31README.eicon
32 - info on driver for Eicon active cards.
33README.concap
34 - info on "CONCAP" encapsulation protocol interface used for X.25.
35README.diversion
36 - info on module for isdn diversion services.
37README.sc
38 - info on driver for Spellcaster cards.
39README.x25
40 _ info for running X.25 over ISDN.
41README.hysdn
42 - info on driver for Hypercope active HYSDN cards
43
diff --git a/Documentation/isdn/CREDITS b/Documentation/isdn/CREDITS
new file mode 100644
index 000000000000..e1b3023efaa8
--- /dev/null
+++ b/Documentation/isdn/CREDITS
@@ -0,0 +1,70 @@
1
2I want to thank all who contributed to this project and especially to:
3(in alphabetical order)
4
5Thomas Bogendörfer (tsbogend@bigbug.franken.de)
6 Tester, lots of bugfixes and hints.
7
8Alan Cox (alan@redhat.com)
9 For help getting into standard-kernel.
10
11Henner Eisen (eis@baty.hanse.de)
12 For X.25 implementation.
13
14Volker Götz (volker@oops.franken.de)
15 For contribution of man-pages, the imontty-tool and a perfect
16 maintaining of the mailing-list at hub-wue.
17
18Matthias Hessler (hessler@isdn4linux.de)
19 For creating and maintaining the FAQ.
20
21Bernhard Hailer (Bernhard.Hailer@lrz.uni-muenchen.de)
22 For creating the FAQ, and the leafsite HOWTO.
23
24Michael 'Ghandi' Herold (michael@abadonna.franken.de)
25 For contribution of the vbox answering machine.
26
27Michael Hipp (Michael.Hipp@student.uni-tuebingen.de)
28 For his Sync-PPP-code.
29
30Karsten Keil (keil@isdn4linux.de)
31 For adding 1TR6-support to the Teles-driver.
32 For the HiSax-driver.
33
34Michael Knigge (knick@cove.han.de)
35 For contributing the imon-tool
36
37Andreas Kool (akool@Kool.f.EUnet.de)
38 For contribution of the isdnlog/isdnrep-tool
39
40Pedro Roque Marques (roque@di.fc.ul.pt)
41 For lot of new ideas and the pcbit driver.
42
43Eberhard Moenkeberg (emoenke@gwdg.de)
44 For testing and help to get into kernel.
45
46Thomas Neumann (tn@ruhr.de)
47 For help with Cisco-SLARP and keepalive
48
49Jan den Ouden (denouden@groovin.xs4all.nl)
50 For contribution of the original teles-driver
51
52Carsten Paeth (calle@calle.in-berlin.de)
53 For the AVM-B1-CAPI2.0 driver
54
55Thomas Pfeiffer (pfeiffer@pds.de)
56 For V.110, extended T.70 and Hylafax extensions in isdn_tty.c
57
58Max Riegel (riegel@max.franken.de)
59 For making the ICN hardware-documentation and test-equipment available.
60
61Armin Schindler (mac@melware.de)
62 For the eicon active card driver.
63
64Gerhard 'Fido' Schneider (fido@wuff.mayn.de)
65 For heavy-duty-beta-testing with his BBS ;)
66
67Thomas Uhl (uhl@think.de)
68 For distributing the cards.
69 For pushing me to work ;-)
70
diff --git a/Documentation/isdn/HiSax.cert b/Documentation/isdn/HiSax.cert
new file mode 100644
index 000000000000..f2a6fcb8efee
--- /dev/null
+++ b/Documentation/isdn/HiSax.cert
@@ -0,0 +1,96 @@
1-----BEGIN PGP SIGNED MESSAGE-----
2
3First:
4
5 HiSax is free software; you can redistribute it and/or modify
6 it under the terms of the GNU General Public License as published by
7 the Free Software Foundation; either version 2 of the License, or
8 (at your option) any later version.
9
10 This program is distributed in the hope that it will be useful,
11 but WITHOUT ANY WARRANTY; without even the implied warranty of
12 MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
13 GNU General Public License for more details.
14
15However, if you wish to modify the HiSax sources, please note the following:
16
17HiSax has passed the ITU approval test suite with ELSA Quickstep ISDN cards
18and Eicon Technology Diva 2.01 PCI card.
19The certification is only valid for the combination of the tested software
20version and the tested hardware. Any changes to the HiSax source code may
21therefore affect the certification.
22
23Additional ITU approval tests have been carried out for all generic cards
24using Colognechip single chip solutions HFC-S PCI A for PCI cards as well
25as HFC-S USB based USB ISDN ta adapters.
26These tests included all layers 1-3 and as well all functional tests for
27the layer 1. Because all hardware based on these chips are complete ISDN
28solutions in one chip all cards and USB-TAs using these chips are to be
29regarded as approved for those tests. Some additional electrical tests
30of the layer 1 which are independent of the driver and related to a
31special hardware used will be regarded as approved if at least one
32solution has been tested including those electrical tests. So if cards
33or tas have been completely approved for any other os, the approval
34for those electrical tests is valid for linux, too.
35Please send any questions regarding this drivers or approval abouts to
36werner@isdn-development.de
37Additional information and the type approval documents will be found
38shortly on the Colognechip website www.colognechip.com
39
40If you change the main files of the HiSax ISDN stack, the certification will
41become invalid. Because in most countries it is illegal to connect
42unapproved ISDN equipment to the public network, I have to guarantee that
43changes in HiSax do not affect the certification.
44
45In order to make a valid certification apparent to the user, I have built in
46some validation checks that are made during the make process. The HiSax main
47files are protected by md5 checksums and the md5sum file is pgp signed by
48myself:
49
50KeyID 1024/FF992F6D 1997/01/16 Karsten Keil <kkeil@suse.de>
51Key fingerprint = 92 6B F7 58 EE 86 28 C8 C4 1A E6 DC 39 89 F2 AA
52
53Only if the checksums are OK, and the signature of the file
54"drivers/isdn/hisax/md5sums.asc" match, is the certification valid; a
55message confirming this is then displayed during the hisax init process.
56
57The affected files are:
58
59drivers/isdn/hisax/isac.c
60drivers/isdn/hisax/isdnl1.c
61drivers/isdn/hisax/isdnl2.c
62drivers/isdn/hisax/isdnl3.c
63drivers/isdn/hisax/tei.c
64drivers/isdn/hisax/callc.c
65drivers/isdn/hisax/l3dss1.c
66drivers/isdn/hisax/l3_1tr6.c
67drivers/isdn/hisax/cert.c
68drivers/isdn/hisax/elsa.c
69drivers/isdn/hisax/diva.c
70drivers/isdn/hisax/hfc_pci.c
71
72Please send any changes, bugfixes and patches to me rather than implementing
73them directly into the HiSax sources.
74
75This does not reduce your rights granted by the GNU General Public License.
76If you wish to change the sources, go ahead; but note that then the
77certification is invalid even if you use one of the approved cards.
78
79Here are the certification registration numbers for ELSA Quickstep cards:
80German D133361J CETECOM ICT Services GmbH 0682
81European D133362J CETECOM ICT Services GmbH 0682
82
83
84Karsten Keil
85keil@isdn4linux.de
86
87-----BEGIN PGP SIGNATURE-----
88Version: 2.6.3i
89Charset: noconv
90
91iQCVAwUBOFAwqTpxHvX/mS9tAQFI2QP9GLDK2iy/KBhwReE3F7LeO+tVhffTVZ3a
9220q5/z/WcIg/pnH0uTkl2UgDXBFXYl45zJyDGNpAposIFmT+Edd14o7Vj1w/BBdn
93Y+5rBmJf+gyBu61da5d6bv0lpymwRa/um+ri+ilYnZ/XPfg5JKhdjGSBCJuJAElM
94d2jFbTrsMYw=
95=LNf9
96-----END PGP SIGNATURE-----
diff --git a/Documentation/isdn/INTERFACE b/Documentation/isdn/INTERFACE
new file mode 100644
index 000000000000..5df17e5b25c8
--- /dev/null
+++ b/Documentation/isdn/INTERFACE
@@ -0,0 +1,759 @@
1$Id: INTERFACE,v 1.15.8.2 2001/03/13 16:17:07 kai Exp $
2
3Description of the Interface between Linklevel and Hardwarelevel
4 of isdn4linux:
5
6
7 The Communication between Linklevel (LL) and Hardwarelevel (HL)
8 is based on the struct isdn_if (defined in isdnif.h).
9
10 An HL-driver can register itself at LL by calling the function
11 register_isdn() with a pointer to that struct. Prior to that, it has
12 to preset some of the fields of isdn_if. The LL sets the rest of
13 the fields. All further communication is done via callbacks using
14 the function-pointers defined in isdn_if.
15
16 Changes/Version numbering:
17
18 During development of the ISDN subsystem, several changes have been
19 made to the interface. Before it went into kernel, the package
20 had a unique version number. The last version, distributed separately
21 was 0.7.4. When the subsystem went into kernel, every functional unit
22 got a separate version number. These numbers are shown at initialization,
23 separated by slashes:
24
25 c.c/t.t/n.n/p.p/a.a/v.v
26
27 where
28
29 c.c is the revision of the common code.
30 t.t is the revision of the tty related code.
31 n.n is the revision of the network related code.
32 p.p is the revision of the ppp related code.
33 a.a is the revision of the audio related code.
34 v.v is the revision of the V.110 related code.
35
36 Changes in this document are marked with '***CHANGEx' where x representing
37 the version number. If that number starts with 0, it refers to the old,
38 separately distributed package. If it starts with one of the letters
39 above, it refers to the revision of the corresponding module.
40 ***CHANGEIx refers to the revision number of the isdnif.h
41
421. Description of the fields of isdn_if:
43
44 int channels;
45
46 This field has to be set by the HL-driver to the number of channels
47 supported prior to calling register_isdn(). Upon return of the call,
48 the LL puts an id there, which has to be used by the HL-driver when
49 invoking the other callbacks.
50
51 int maxbufsize;
52
53 ***CHANGE0.6: New since this version.
54
55 Also to be preset by the HL-driver. With this value the HL-driver
56 tells the LL the maximum size of a data-packet it will accept.
57
58 unsigned long features;
59
60 To be preset by the HL-driver. Using this field, the HL-driver
61 announces the features supported. At the moment this is limited to
62 report the supported layer2 and layer3-protocols. For setting this
63 field the constants ISDN_FEATURE..., declared in isdnif.h have to be
64 used.
65
66 ***CHANGE0.7.1: The line type (1TR6, EDSS1) has to be set.
67
68 unsigned short hl_hdrlen;
69
70 ***CHANGE0.7.4: New field.
71
72 To be preset by the HL-driver, if it supports sk_buff's. The driver
73 should put here the amount of additional space needed in sk_buff's for
74 its internal purposes. Drivers not supporting sk_buff's should
75 initialize this field to 0.
76
77 void (*rcvcallb_skb)(int, int, struct sk_buff *)
78
79 ***CHANGE0.7.4: New field.
80
81 This field will be set by LL. The HL-driver delivers received data-
82 packets by calling this function. Upon calling, the HL-driver must
83 already have its private data pulled off the head of the sk_buff.
84
85 Parameter:
86 int driver-Id
87 int Channel-number locally to the driver. (starting with 0)
88 struct sk_buff * Pointer to sk_buff, containing received data.
89
90 int (*statcallb)(isdn_ctrl*);
91
92 This field will be set by LL. This function has to be called by the
93 HL-driver for signaling status-changes or other events to the LL.
94
95 Parameter:
96 isdn_ctrl*
97
98 The struct isdn_ctrl also defined in isdn_if. The exact meanings of its
99 fields are described together with the descriptions of the possible
100 events. Here is only a short description of the fields:
101
102 driver = driver Id.
103 command = event-type. (one of the constants ISDN_STAT_...)
104 arg = depends on event-type.
105 num = depends on event-type.
106
107 Returnvalue:
108 0 on success, else -1
109
110 int (*command)(isdn_ctrl*);
111
112 This field has to be preset by the HL-driver. It points to a function,
113 to be called by LL to perform functions like dialing, B-channel
114 setup, etc. The exact meaning of the parameters is described with the
115 descriptions of the possible commands.
116
117 Parameter:
118 isdn_ctrl*
119 driver = driver-Id
120 command = command to perform. (one of the constants ISDN_CMD_...)
121 arg = depends on command.
122 num = depends on command.
123
124 Returnvalue:
125 >=0 on success, else error-code (-ENODEV etc.)
126
127 int (*writebuf_skb)(int, int, int, struct sk_buff *)
128
129 ***CHANGE0.7.4: New field.
130 ***CHANGEI.1.21: New field.
131
132 This field has to be preset by the HL-driver. The given function will
133 be called by the LL for delivering data to be send via B-Channel.
134
135
136 Parameter:
137 int driver-Id ***CHANGE0.7.4: New parameter.
138 int channel-number locally to the HL-driver. (starts with 0)
139 int ack ***ChangeI1.21: New parameter
140 If this is !0, the driver has to signal the delivery
141 by sending an ISDN_STAT_BSENT. If this is 0, the driver
142 MUST NOT send an ISDN_STAT_BSENT.
143 struct sk_buff * Pointer to sk_buff containing data to be send via
144 B-channel.
145
146 Returnvalue:
147 Length of data accepted on success, else error-code (-EINVAL on
148 oversized packets etc.)
149
150 int (*writecmd)(u_char*, int, int, int, int);
151
152 This field has to be preset by the HL-driver. The given function will be
153 called to perform write-requests on /dev/isdnctrl (i.e. sending commands
154 to the card) The data-format is hardware-specific. This function is
155 intended for debugging only. It is not necessary for normal operation
156 and never will be called by the tty-emulation- or network-code. If
157 this function is not supported, the driver has to set NULL here.
158
159 Parameter:
160 u_char* pointer to data.
161 int length of data.
162 int flag: 0 = call from within kernel-space. (HL-driver must use
163 memcpy, may NOT use schedule())
164 1 = call from user-space. (HL-driver must use
165 memcpy_fromfs, use of schedule() allowed)
166 int driver-Id.
167 int channel-number locally to the HL-driver. (starts with 0)
168
169***CHANGEI1.14: The driver-Id and channel-number are new since this revision.
170
171 Returnvalue:
172 Length of data accepted on success, else error-code (-EINVAL etc.)
173
174 int (*readstat)(u_char*, int, int, int, int);
175
176 This field has to be preset by the HL-driver. The given function will be
177 called to perform read-requests on /dev/isdnctrl (i.e. reading replies
178 from the card) The data-format is hardware-specific. This function is
179 intended for debugging only. It is not necessary for normal operation
180 and never will be called by the tty-emulation- or network-code. If
181 this function is not supported, the driver has to set NULL here.
182
183 Parameter:
184 u_char* pointer to data.
185 int length of data.
186 int flag: 0 = call from within kernel-space. (HL-driver must use
187 memcpy, may NOT use schedule())
188 1 = call from user-space. (HL-driver must use
189 memcpy_fromfs, use of schedule() allowed)
190 int driver-Id.
191 int channel-number locally to the HL-driver. (starts with 0)
192
193***CHANGEI1.14: The driver-Id and channel-number are new since this revision.
194
195 Returnvalue:
196 Length of data on success, else error-code (-EINVAL etc.)
197
198 char id[20];
199 ***CHANGE0.7: New since this version.
200
201 This string has to be preset by the HL-driver. Its purpose is for
202 identification of the driver by the user. Eg.: it is shown in the
203 status-info of /dev/isdninfo. Furthermore it is used as Id for binding
204 net-interfaces to a specific channel. If a string of length zero is
205 given, upon return, isdn4linux will replace it by a generic name. (line0,
206 line1 etc.) It is recommended to make this string configurable during
207 module-load-time. (copy a global variable to this string.) For doing that,
208 modules 1.2.8 or newer are necessary.
209
2102. Description of the commands, a HL-driver has to support:
211
212 All commands will be performed by calling the function command() described
213 above from within the LL. The field command of the struct-parameter will
214 contain the desired command, the field driver is always set to the
215 appropriate driver-Id.
216
217 Until now, the following commands are defined:
218
219***CHANGEI1.34: The parameter "num" has been replaced by a union "parm" containing
220 the old "num" and a new setup_type struct used for ISDN_CMD_DIAL
221 and ISDN_STAT_ICALL callback.
222
223 ISDN_CMD_IOCTL:
224
225 This command is intended for performing ioctl-calls for configuring
226 hardware or similar purposes (setting port-addresses, loading firmware
227 etc.) For this purpose, in the LL all ioctl-calls with an argument
228 >= IIOCDRVCTL (0x100) will be handed transparently to this
229 function after subtracting 0x100 and placing the result in arg.
230 Example:
231 If a userlevel-program calls ioctl(0x101,...) the function gets
232 called with the field command set to 1.
233
234 Parameter:
235 driver = driver-Id.
236 command = ISDN_CMD_IOCTL
237 arg = Original ioctl-cmd - IIOCDRVCTL
238 parm.num = first bytes filled with (unsigned long)arg
239
240 Returnvalue:
241 Depending on driver.
242
243
244 ISDN_CMD_DIAL:
245
246 This command is used to tell the HL-driver it should dial a given
247 number.
248
249 Parameter:
250 driver = driver-Id.
251 command = ISDN_CMD_DIAL
252 arg = channel-number locally to the driver. (starting with 0)
253
254 parm.setup.phone = An ASCII-String containing the number to dial.
255 parm.setup.eazmsn = An ASCII-Sting containing the own EAZ or MSN.
256 parm.setup.si1 = The Service-Indicator.
257 parm.setup.si2 = Additional Service-Indicator.
258
259 If the Line has been designed as SPV (a special german
260 feature, meaning semi-leased-line) the phone has to
261 start with an "S".
262 ***CHANGE0.6: In previous versions the EAZ has been given in the
263 highbyte of arg.
264 ***CHANGE0.7.1: New since this version: ServiceIndicator and AddInfo.
265
266 ISDN_CMD_ACCEPTD:
267
268 With this command, the HL-driver is told to accept a D-Channel-setup.
269 (Response to an incoming call)
270
271 Parameter:
272 driver = driver-Id.
273 command = ISDN_CMD_ACCEPTD
274 arg = channel-number locally to the driver. (starting with 0)
275 parm = unused.
276
277 ISDN_CMD_ACCEPTB:
278
279 With this command, the HL-driver is told to perform a B-Channel-setup.
280 (after establishing D-Channel-Connection)
281
282 Parameter:
283 driver = driver-Id.
284 command = ISDN_CMD_ACCEPTB
285 arg = channel-number locally to the driver. (starting with 0)
286 parm = unused.
287
288 ISDN_CMD_HANGUP:
289
290 With this command, the HL-driver is told to hangup (B-Channel if
291 established first, then D-Channel). This command is also used for
292 actively rejecting an incoming call.
293
294 Parameter:
295 driver = driver-Id.
296 command = ISDN_CMD_HANGUP
297 arg = channel-number locally to the driver. (starting with 0)
298 parm = unused.
299
300 ISDN_CMD_CLREAZ:
301
302 With this command, the HL-driver is told not to signal incoming
303 calls to the LL.
304
305 Parameter:
306 driver = driver-Id.
307 command = ISDN_CMD_CLREAZ
308 arg = channel-number locally to the driver. (starting with 0)
309 parm = unused.
310
311 ISDN_CMD_SETEAZ:
312
313 With this command, the HL-driver is told to signal incoming calls for
314 the given EAZs/MSNs to the LL.
315
316 Parameter:
317 driver = driver-Id.
318 command = ISDN_CMD_SETEAZ
319 arg = channel-number locally to the driver. (starting with 0)
320 parm.num = ASCII-String, containing the desired EAZ's/MSN's
321 (comma-separated). If an empty String is given, the
322 HL-driver should respond to ALL incoming calls,
323 regardless of the destination-address.
324 ***CHANGE0.6: New since this version the "empty-string"-feature.
325
326 ISDN_CMD_GETEAZ: (currently unused)
327
328 With this command, the HL-driver is told to report the current setting
329 given with ISDN_CMD_SETEAZ.
330
331 Parameter:
332 driver = driver-Id.
333 command = ISDN_CMD_GETEAZ
334 arg = channel-number locally to the driver. (starting with 0)
335 parm.num = ASCII-String, containing the current EAZ's/MSN's
336
337 ISDN_CMD_SETSIL: (currently unused)
338
339 With this command, the HL-driver is told to signal only incoming
340 calls with the given Service-Indicators.
341
342 Parameter:
343 driver = driver-Id.
344 command = ISDN_CMD_SETSIL
345 arg = channel-number locally to the driver. (starting with 0)
346 parm.num = ASCII-String, containing the desired Service-Indicators.
347
348 ISDN_CMD_GETSIL: (currently unused)
349
350 With this command, the HL-driver is told to return the current
351 Service-Indicators it will respond to.
352
353 Parameter:
354 driver = driver-Id.
355 command = ISDN_CMD_SETSIL
356 arg = channel-number locally to the driver. (starting with 0)
357 parm.num = ASCII-String, containing the current Service-Indicators.
358
359 ISDN_CMD_SETL2:
360
361 With this command, the HL-driver is told to select the given Layer-2-
362 protocol. This command is issued by the LL prior to ISDN_CMD_DIAL or
363 ISDN_CMD_ACCEPTD.
364
365
366 Parameter:
367 driver = driver-Id.
368 command = ISDN_CMD_SETL2
369 arg = channel-number locally to the driver. (starting with 0)
370 logical or'ed with (protocol-Id << 8)
371 protocol-Id is one of the constants ISDN_PROTO_L2...
372 parm = unused.
373
374 ISDN_CMD_GETL2: (currently unused)
375
376 With this command, the HL-driver is told to return the current
377 setting of the Layer-2-protocol.
378
379 Parameter:
380 driver = driver-Id.
381 command = ISDN_CMD_GETL2
382 arg = channel-number locally to the driver. (starting with 0)
383 parm = unused.
384 Returnvalue:
385 current protocol-Id (one of the constants ISDN_L2_PROTO)
386
387 ISDN_CMD_SETL3:
388
389 With this command, the HL-driver is told to select the given Layer-3-
390 protocol. This command is issued by the LL prior to ISDN_CMD_DIAL or
391 ISDN_CMD_ACCEPTD.
392
393
394 Parameter:
395 driver = driver-Id.
396 command = ISDN_CMD_SETL3
397 arg = channel-number locally to the driver. (starting with 0)
398 logical or'ed with (protocol-Id << 8)
399 protocol-Id is one of the constants ISDN_PROTO_L3...
400 parm.fax = Pointer to T30_s fax struct. (fax usage only)
401
402 ISDN_CMD_GETL2: (currently unused)
403
404 With this command, the HL-driver is told to return the current
405 setting of the Layer-3-protocol.
406
407 Parameter:
408 driver = driver-Id.
409 command = ISDN_CMD_GETL3
410 arg = channel-number locally to the driver. (starting with 0)
411 parm = unused.
412 Returnvalue:
413 current protocol-Id (one of the constants ISDN_L3_PROTO)
414
415 ISDN_CMD_PROCEED:
416
417 With this command, the HL-driver is told to proceed with a incoming call.
418
419 Parameter:
420 driver = driver-Id.
421 command = ISDN_CMD_PROCEED
422 arg = channel-number locally to the driver. (starting with 0)
423 setup.eazmsn= empty string or string send as uus1 in DSS1 with
424 PROCEED message
425
426 ISDN_CMD_ALERT:
427
428 With this command, the HL-driver is told to alert a proceeding call.
429
430 Parameter:
431 driver = driver-Id.
432 command = ISDN_CMD_ALERT
433 arg = channel-number locally to the driver. (starting with 0)
434 setup.eazmsn= empty string or string send as uus1 in DSS1 with
435 ALERT message
436
437 ISDN_CMD_REDIR:
438
439 With this command, the HL-driver is told to redirect a call in proceeding
440 or alerting state.
441
442 Parameter:
443 driver = driver-Id.
444 command = ISDN_CMD_REDIR
445 arg = channel-number locally to the driver. (starting with 0)
446 setup.eazmsn= empty string or string send as uus1 in DSS1 protocol
447 setup.screen= screening indicator
448 setup.phone = redirected to party number
449
450 ISDN_CMD_PROT_IO:
451
452 With this call, the LL-driver invokes protocol specific features through
453 the LL.
454 The call is not implicitely bound to a connection.
455
456 Parameter:
457 driver = driver-Id
458 command = ISDN_CMD_PROT_IO
459 arg = The lower 8 Bits define the addressed protocol as defined
460 in ISDN_PTYPE..., the upper bits are used to differentiate
461 the protocol specific CMD.
462
463 para = protocol and function specific. See isdnif.h for detail.
464
465
466 ISDN_CMD_FAXCMD:
467
468 With this command the HL-driver receives a fax sub-command.
469 For details refer to INTERFACE.fax
470
471 Parameter:
472 driver = driver-Id.
473 command = ISDN_CMD_FAXCMD
474 arg = channel-number locally to the driver. (starting with 0)
475 parm = unused.
476
477
4783. Description of the events to be signaled by the HL-driver to the LL.
479
480 All status-changes are signaled via calling the previously described
481 function statcallb(). The field command of the struct isdn_cmd has
482 to be set by the HL-driver with the appropriate Status-Id (event-number).
483 The field arg has to be set to the channel-number (locally to the driver,
484 starting with 0) to which this event applies. (Exception: STAVAIL-event)
485
486 Until now, the following Status-Ids are defined:
487
488 ISDN_STAT_AVAIL:
489
490 With this call, the HL-driver signals the availability of new data
491 for readstat(). Used only for debugging-purposes, see description
492 of readstat().
493
494 Parameter:
495 driver = driver-Id
496 command = ISDN_STAT_STAVAIL
497 arg = length of available data.
498 parm = unused.
499
500 ISDN_STAT_ICALL:
501 ISDN_STAT_ICALLW:
502
503 With this call, the HL-driver signals an incoming call to the LL.
504 If ICALLW is signalled the incoming call is a waiting call without
505 a available B-chan.
506
507 Parameter:
508 driver = driver-Id
509 command = ISDN_STAT_ICALL
510 arg = channel-number, locally to the driver. (starting with 0)
511 para.setup.phone = Callernumber.
512 para.setup.eazmsn = CalledNumber.
513 para.setup.si1 = Service Indicator.
514 para.setup.si2 = Additional Service Indicator.
515 para.setup.plan = octet 3 from Calling party number Information Element.
516 para.setup.screen = octet 3a from Calling party number Information Element.
517
518 Return:
519 0 = No device matching this call.
520 1 = At least one device matching this call (RING on ttyI).
521 HL-driver may send ALERTING on the D-channel in this case.
522 2 = Call will be rejected.
523 3 = Incoming called party number is currently incomplete.
524 Additional digits are required.
525 Used for signalling with PtP connections.
526 4 = Call will be held in a proceeding state
527 (HL driver sends PROCEEDING)
528 Used when a user space prog needs time to interpret a call
529 para.setup.eazmsn may be filled with an uus1 message of
530 30 octets maximum. Empty string if no uus.
531 5 = Call will be actively deflected to another party
532 Only available in DSS1/EURO protocol
533 para.setup.phone must be set to destination party number
534 para.setup.eazmsn may be filled with an uus1 message of
535 30 octets maximum. Empty string if no uus.
536 -1 = An error happened. (Invalid parameters for example.)
537 The keypad support now is included in the dial command.
538
539
540 ISDN_STAT_RUN:
541
542 With this call, the HL-driver signals availability of the ISDN-card.
543 (after initializing, loading firmware)
544
545 Parameter:
546 driver = driver-Id
547 command = ISDN_STAT_RUN
548 arg = unused.
549 parm = unused.
550
551 ISDN_STAT_STOP:
552
553 With this call, the HL-driver signals unavailability of the ISDN-card.
554 (before unloading, while resetting/reconfiguring the card)
555
556 Parameter:
557 driver = driver-Id
558 command = ISDN_STAT_STOP
559 arg = unused.
560 parm = unused.
561
562 ISDN_STAT_DCONN:
563
564 With this call, the HL-driver signals the successful establishment of
565 a D-Channel-connection. (Response to ISDN_CMD_ACCEPTD or ISDN_CMD_DIAL)
566
567 Parameter:
568 driver = driver-Id
569 command = ISDN_STAT_DCONN
570 arg = channel-number, locally to the driver. (starting with 0)
571 parm = unused.
572
573 ISDN_STAT_BCONN:
574
575 With this call, the HL-driver signals the successful establishment of
576 a B-Channel-connection. (Response to ISDN_CMD_ACCEPTB or because the
577 remote-station has initiated establishment)
578
579 The HL driver should call this when the logical l2/l3 protocol
580 connection on top of the physical B-channel is established.
581
582 Parameter:
583 driver = driver-Id
584 command = ISDN_STAT_BCONN
585 arg = channel-number, locally to the driver. (starting with 0)
586 parm.num = ASCII-String, containing type of connection (for analog
587 modem only). This will be appended to the CONNECT message
588 e.g. 14400/V.32bis
589
590 ISDN_STAT_DHUP:
591
592 With this call, the HL-driver signals the shutdown of a
593 D-Channel-connection. This could be a response to a prior ISDN_CMD_HANGUP,
594 or caused by a remote-hangup or if the remote-station has actively
595 rejected a call.
596
597 Parameter:
598 driver = driver-Id
599 command = ISDN_STAT_DHUP
600 arg = channel-number, locally to the driver. (starting with 0)
601 parm = unused.
602
603 ISDN_STAT_BHUP:
604
605 With this call, the HL-driver signals the shutdown of a
606 B-Channel-connection. This could be a response to a prior ISDN_CMD_HANGUP,
607 or caused by a remote-hangup.
608
609 The HL driver should call this as soon as the logical l2/l3 protocol
610 connection on top of the physical B-channel is released.
611
612 Parameter:
613 driver = driver-Id
614 command = ISDN_STAT_BHUP
615 arg = channel-number, locally to the driver. (starting with 0)
616 parm = unused.
617
618 ISDN_STAT_CINF:
619
620 With this call, the HL-driver delivers charge-unit information to the
621 LL.
622
623 Parameter:
624 driver = driver-Id
625 command = ISDN_STAT_CINF
626 arg = channel-number, locally to the driver. (starting with 0)
627 parm.num = ASCII string containing charge-units (digits only).
628
629 ISDN_STAT_LOAD: (currently unused)
630
631 ISDN_STAT_UNLOAD:
632
633 With this call, the HL-driver signals that it will be unloaded now. This
634 tells the LL to release all corresponding data-structures.
635
636 Parameter:
637 driver = driver-Id
638 command = ISDN_STAT_UNLOAD
639 arg = unused.
640 parm = unused.
641
642 ISDN_STAT_BSENT:
643
644 With this call the HL-driver signals the delivery of a data-packet.
645 This callback is used by the network-interfaces only, tty-Emulation
646 does not need this call.
647
648 Parameter:
649 driver = driver-Id
650 command = ISDN_STAT_BSENT
651 arg = channel-number, locally to the driver. (starting with 0)
652 parm.length = ***CHANGEI.1.21: New field.
653 the driver has to set this to the original length
654 of the skb at the time of receiving it from the linklevel.
655
656 ISDN_STAT_NODCH:
657
658 With this call, the driver has to respond to a prior ISDN_CMD_DIAL, if
659 no D-Channel is available.
660
661 Parameter:
662 driver = driver-Id
663 command = ISDN_STAT_NODCH
664 arg = channel-number, locally to the driver. (starting with 0)
665 parm = unused.
666
667 ISDN_STAT_ADDCH:
668
669 This call is for HL-drivers, which are unable to check card-type
670 or numbers of supported channels before they have loaded any firmware
671 using ioctl. Those HL-driver simply set the channel-parameter to a
672 minimum channel-number when registering, and later if they know
673 the real amount, perform this call, allocating additional channels.
674
675 Parameter:
676 driver = driver-Id
677 command = ISDN_STAT_ADDCH
678 arg = number of channels to be added.
679 parm = unused.
680
681 ISDN_STAT_CAUSE:
682
683 With this call, the HL-driver delivers CAUSE-messages to the LL.
684 Currently the LL does not use this messages. Their contents is simply
685 logged via kernel-messages. Therefore, currently the format of the
686 messages is completely free. However they should be printable.
687
688 Parameter:
689 driver = driver-Id
690 command = ISDN_STAT_NODCH
691 arg = channel-number, locally to the driver. (starting with 0)
692 parm.num = ASCII string containing CAUSE-message.
693
694 ISDN_STAT_DISPLAY:
695
696 With this call, the HL-driver delivers DISPLAY-messages to the LL.
697 Currently the LL does not use this messages.
698
699 Parameter:
700 driver = driver-Id
701 command = ISDN_STAT_DISPLAY
702 arg = channel-number, locally to the driver. (starting with 0)
703 para.display= string containing DISPLAY-message.
704
705 ISDN_STAT_PROT:
706
707 With this call, the HL-driver delivers protocol specific infos to the LL.
708 The call is not implicitely bound to a connection.
709
710 Parameter:
711 driver = driver-Id
712 command = ISDN_STAT_PROT
713 arg = The lower 8 Bits define the addressed protocol as defined
714 in ISDN_PTYPE..., the upper bits are used to differentiate
715 the protocol specific STAT.
716
717 para = protocol and function specific. See isdnif.h for detail.
718
719 ISDN_STAT_DISCH:
720
721 With this call, the HL-driver signals the LL to disable or enable the
722 use of supplied channel and driver.
723 The call may be used to reduce the available number of B-channels after
724 loading the driver. The LL has to ignore a disabled channel when searching
725 for free channels. The HL driver itself never delivers STAT callbacks for
726 disabled channels.
727 The LL returns a nonzero code if the operation was not successful or the
728 selected channel is actually regarded as busy.
729
730 Parameter:
731 driver = driver-Id
732 command = ISDN_STAT_DISCH
733 arg = channel-number, locally to the driver. (starting with 0)
734 parm.num[0] = 0 if channel shall be disabled, else enabled.
735
736 ISDN_STAT_L1ERR:
737
738 ***CHANGEI1.21 new status message.
739 A signal can be sent to the linklevel if an Layer1-error results in
740 packet-loss on receive or send. The field errcode of the cmd.parm
741 union describes the error more precisely.
742
743 Parameter:
744 driver = driver-Id
745 command = ISDN_STAT_L1ERR
746 arg = channel-number, locally to the driver. (starting with 0)
747 parm.errcode= ISDN_STAT_L1ERR_SEND: Packet lost while sending.
748 ISDN_STAT_L1ERR_RECV: Packet lost while receiving.
749 ISDN_STAT_FAXIND:
750
751 With this call the HL-driver signals a fax sub-command to the LL.
752 For details refer to INTERFACE.fax
753
754 Parameter:
755 driver = driver-Id.
756 command = ISDN_STAT_FAXIND
757 arg = channel-number, locally to the driver. (starting with 0)
758 parm = unused.
759
diff --git a/Documentation/isdn/INTERFACE.fax b/Documentation/isdn/INTERFACE.fax
new file mode 100644
index 000000000000..7e5731319e30
--- /dev/null
+++ b/Documentation/isdn/INTERFACE.fax
@@ -0,0 +1,163 @@
1$Id: INTERFACE.fax,v 1.2 2000/08/06 09:22:50 armin Exp $
2
3
4Description of the fax-subinterface between linklevel and hardwarelevel of
5 isdn4linux.
6
7 The communication between linklevel (LL) and hardwarelevel (HL) for fax
8 is based on the struct T30_s (defined in isdnif.h).
9 This struct is allocated in the LL.
10 In order to use fax, the LL provides the pointer to this struct with the
11 command ISDN_CMD_SETL3 (parm.fax). This pointer expires in case of hangup
12 and when a new channel to a new connection is assigned.
13
14
15Data handling:
16 In send-mode the HL-driver has to handle the <DLE> codes and the bit-order
17 conversion by itself.
18 In receive-mode the LL-driver takes care of the bit-order conversion
19 (specified by +FBOR)
20
21Structure T30_s description:
22
23 This structure stores the values (set by AT-commands), the remote-
24 capability-values and the command-codes between LL and HL.
25
26 If the HL-driver receives ISDN_CMD_FAXCMD, all needed information
27 is in this struct set by the LL.
28 To signal information to the LL, the HL-driver has to set the
29 the parameters and use ISDN_STAT_FAXIND.
30 (Please refer to INTERFACE)
31
32Structure T30_s:
33
34 All members are 8-bit unsigned (__u8)
35
36 - resolution
37 - rate
38 - width
39 - length
40 - compression
41 - ecm
42 - binary
43 - scantime
44 - id[]
45 Local faxmachine's parameters, set by +FDIS, +FDCS, +FLID, ...
46
47 - r_resolution
48 - r_rate
49 - r_width
50 - r_length
51 - r_compression
52 - r_ecm
53 - r_binary
54 - r_scantime
55 - r_id[]
56 Remote faxmachine's parameters. To be set by HL-driver.
57
58 - phase
59 Defines the actual state of fax connection. Set by HL or LL
60 depending on progress and type of connection.
61 If the phase changes because of an AT command, the LL driver
62 changes this value. Otherwise the HL-driver takes care of it, but
63 only necessary on call establishment (from IDLE to PHASE_A).
64 (one of the constants ISDN_FAX_PHASE_[IDLE,A,B,C,D,E])
65
66 - direction
67 Defines outgoing/send or incoming/receive connection.
68 (ISDN_TTY_FAX_CONN_[IN,OUT])
69
70 - code
71 Commands from LL to HL; possible constants :
72 ISDN_TTY_FAX_DR signals +FDR command to HL
73
74 ISDN_TTY_FAX_DT signals +FDT command to HL
75
76 ISDN_TTY_FAX_ET signals +FET command to HL
77
78
79 Other than that the "code" is set with the hangup-code value at
80 the end of connection for the +FHNG message.
81
82 - r_code
83 Commands from HL to LL; possible constants :
84 ISDN_TTY_FAX_CFR output of +FCFR message.
85
86 ISDN_TTY_FAX_RID output of remote ID set in r_id[]
87 (+FCSI/+FTSI on send/receive)
88
89 ISDN_TTY_FAX_DCS output of +FDCS and CONNECT message,
90 switching to phase C.
91
92 ISDN_TTY_FAX_ET signals end of data,
93 switching to phase D.
94
95 ISDN_TTY_FAX_FCON signals the established, outgoing connection,
96 switching to phase B.
97
98 ISDN_TTY_FAX_FCON_I signals the established, incoming connection,
99 switching to phase B.
100
101 ISDN_TTY_FAX_DIS output of +FDIS message and values.
102
103 ISDN_TTY_FAX_SENT signals that all data has been sent
104 and <DLE><ETX> is acknowledged,
105 OK message will be sent.
106
107 ISDN_TTY_FAX_PTS signals a msg-confirmation (page sent successful),
108 depending on fet value:
109 0: output OK message (more pages follow)
110 1: switching to phase B (next document)
111
112 ISDN_TTY_FAX_TRAIN_OK output of +FDCS and OK message (for receive mode).
113
114 ISDN_TTY_FAX_EOP signals end of data in receive mode,
115 switching to phase D.
116
117 ISDN_TTY_FAX_HNG output of the +FHNG and value set by code and
118 OK message, switching to phase E.
119
120
121 - badlin
122 Value of +FBADLIN
123
124 - badmul
125 Value of +FBADMUL
126
127 - bor
128 Value of +FBOR
129
130 - fet
131 Value of +FET command in send-mode.
132 Set by HL in receive-mode for +FET message.
133
134 - pollid[]
135 ID-string, set by +FCIG
136
137 - cq
138 Value of +FCQ
139
140 - cr
141 Value of +FCR
142
143 - ctcrty
144 Value of +FCTCRTY
145
146 - minsp
147 Value of +FMINSP
148
149 - phcto
150 Value of +FPHCTO
151
152 - rel
153 Value of +FREL
154
155 - nbc
156 Value of +FNBC (0,1)
157 (+FNBC is not a known class 2 fax command, I added this to change the
158 automatic "best capabilities" connection in the eicon HL-driver)
159
160
161Armin
162mac@melware.de
163
diff --git a/Documentation/isdn/README b/Documentation/isdn/README
new file mode 100644
index 000000000000..761595243931
--- /dev/null
+++ b/Documentation/isdn/README
@@ -0,0 +1,599 @@
1README for the ISDN-subsystem
2
31. Preface
4
5 1.1 Introduction
6
7 This README describes how to set up and how to use the different parts
8 of the ISDN-subsystem.
9
10 For using the ISDN-subsystem, some additional userlevel programs are
11 necessary. Those programs and some contributed utilities are available
12 at
13
14 ftp.isdn4linux.de
15
16 /pub/isdn4linux/isdn4k-utils-<VersionNumber>.tar.gz
17
18
19 We also have set up a mailing-list:
20
21 The isdn4linux-project originates in Germany, and therefore by historical
22 reasons, the mailing-list's primary language is german. However mails
23 written in english have been welcome all the time.
24
25 to subscribe: write a email to majordomo@listserv.isdn4linux.de,
26 Subject irrelevant, in the message body:
27 subscribe isdn4linux <your_email_address>
28
29 To write to the mailing-list, write to isdn4linux@listserv.isdn4linux.de
30
31 This mailinglist is bidirectionally gated to the newsgroup
32
33 de.alt.comm.isdn4linux
34
35 There is also a well maintained FAQ in English available at
36 http://www.mhessler.de/i4lfaq/
37 It can be viewed online, or downloaded in sgml/text/html format.
38 The FAQ can also be viewed online at
39 http://www.isdn4inux.de/faq/
40 or downloaded from
41 ftp://ftp.isdn4linux.de/pub/isdn4linux/FAQ/
42
43 1.1 Technical details
44
45 In the following Text, the terms MSN and EAZ are used.
46
47 MSN is the abbreviation for (M)ultiple(S)ubscriber(N)umber, and applies
48 to Euro(EDSS1)-type lines. Usually it is simply the phone number.
49
50 EAZ is the abbreviation of (E)ndgeraete(A)uswahl(Z)iffer and
51 applies to German 1TR6-type lines. This is a one-digit string,
52 simply appended to the base phone number
53
54 The internal handling is nearly identical, so replace the appropriate
55 term to that one, which applies to your local ISDN-environment.
56
57 When the link-level-module isdn.o is loaded, it supports up to 16
58 low-level-modules with up to 64 channels. (The number 64 is arbitrarily
59 chosen and can be configured at compile-time --ISDN_MAX in isdn.h).
60 A low-level-driver can register itself through an interface (which is
61 defined in isdnif.h) and gets assigned a slot.
62 The following char-devices are made available for each channel:
63
64 A raw-control-device with the following functions:
65 write: raw D-channel-messages (format: depends on driver).
66 read: raw D-channel-messages (format: depends on driver).
67 ioctl: depends on driver, i.e. for the ICN-driver, the base-address of
68 the ports and the shared memory on the card can be set and read
69 also the boot-code and the protocol software can be loaded into
70 the card.
71
72 O N L Y !!! for debugging (no locking against other devices):
73 One raw-data-device with the following functions:
74 write: data to B-channel.
75 read: data from B-channel.
76
77 In addition the following devices are made available:
78
79 128 tty-devices (64 cuix and 64 ttyIx) with integrated modem-emulator:
80 The functionality is almost the same as that of a serial device
81 (the line-discs are handled by the kernel), which lets you run
82 SLIP, CSLIP and asynchronous PPP through the devices. We have tested
83 Seyon, minicom, CSLIP (uri-dip) PPP, mgetty, XCept and Hylafax.
84
85 The modem-emulation supports the following:
86 1.3.1 Commands:
87
88 ATA Answer incoming call.
89 ATD<No.> Dial, the number may contain:
90 [0-9] and [,#.*WPT-S]
91 the latter are ignored until 'S'.
92 The 'S' must precede the number, if
93 the line is a SPV (German 1TR6).
94 ATE0 Echo off.
95 ATE1 Echo on (default).
96 ATH Hang-up.
97 ATH1 Off hook (ignored).
98 ATH0 Hang-up.
99 ATI Return "ISDN for Linux...".
100 ATI0 "
101 ATI1 "
102 ATI2 Report of last connection.
103 ATO On line (data mode).
104 ATQ0 Enable result codes (default).
105 ATQ1 Disable result codes (default).
106 ATSx=y Set register x to y.
107 ATSx? Show contents of register x.
108 ATV0 Numeric responses.
109 ATV1 English responses (default).
110 ATZ Load registers and EAZ/MSN from Profile.
111 AT&Bx Set Send-Packet-size to x (max. 4000)
112 The real packet-size may be limited by the
113 low-level-driver used. e.g. the HiSax-Module-
114 limit is 2000. You will get NO Error-Message,
115 if you set it to higher values, because at the
116 time of giving this command the corresponding
117 driver may not be selected (see "Automatic
118 Assignment") however the size of outgoing packets
119 will be limited correctly.
120 AT&D0 Ignore DTR
121 AT&D2 DTR-low-edge: Hang up and return to
122 command mode (default).
123 AT&D3 Same as AT&D2 but also resets all registers.
124 AT&Ex Set the EAZ/MSN for this channel to x.
125 AT&F Reset all registers and profile to "factory-defaults"
126 AT&Lx Set list of phone numbers to listen on. x is a
127 list of wildcard patterns separated by semicolon.
128 If this is set, it has precedence over the MSN set
129 by AT&E.
130 AT&Rx Select V.110 bitrate adaption.
131 This command enables V.110 protocol with 9600 baud
132 (x=9600), 19200 baud (x=19200) or 38400 baud
133 (x=38400). A value of x=0 disables V.110 switching
134 back to default X.75. This command sets the following
135 Registers:
136 Reg 14 (Layer-2 protocol):
137 x = 0: 0
138 x = 9600: 7
139 x = 19200: 8
140 x = 38400: 9
141 Reg 18.2 = 1
142 Reg 19 (Additional Service Indicator):
143 x = 0: 0
144 x = 9600: 197
145 x = 19200: 199
146 x = 38400: 198
147 Note on value in Reg 19:
148 There is _NO_ common convention for 38400 baud.
149 The value 198 is chosen arbitrarily. Users
150 _MUST_ negotiate this value before establishing
151 a connection.
152 AT&Sx Set window-size (x = 1..8) (not yet implemented)
153 AT&V Show all settings.
154 AT&W0 Write registers and EAZ/MSN to profile. See also
155 iprofd (5.c in this README).
156 AT&X0 BTX-mode and T.70-mode off (default)
157 AT&X1 BTX-mode on. (S13.1=1, S13.5=0 S14=0, S16=7, S18=7, S19=0)
158 AT&X2 T.70-mode on. (S13.1=1, S13.5=1, S14=0, S16=7, S18=7, S19=0)
159 AT+Rx Resume a suspended call with CallID x (x = 1,2,3...)
160 AT+Sx Suspend a call with CallID x (x = 1,2,3...)
161
162 For voice-mode commands refer to README.audio
163
164 1.3.2 Escape sequence:
165 During a connection, the emulation reacts just like
166 a normal modem to the escape sequence <DELAY>+++<DELAY>.
167 (The escape character - default '+' - can be set in the
168 register 2).
169 The DELAY must at least be 1.5 seconds long and delay
170 between the escape characters must not exceed 0.5 seconds.
171
172 1.3.3 Registers:
173
174 Nr. Default Description
175 0 0 Answer on ring number.
176 (no auto-answer if S0=0).
177 1 0 Count of rings.
178 2 43 Escape character.
179 (a value >= 128 disables the escape sequence).
180 3 13 Carriage return character (ASCII).
181 4 10 Line feed character (ASCII).
182 5 8 Backspace character (ASCII).
183 6 3 Delay in seconds before dialing.
184 7 60 Wait for carrier.
185 8 2 Pause time for comma (ignored)
186 9 6 Carrier detect time (ignored)
187 10 7 Carrier loss to disconnect time (ignored).
188 11 70 Touch tone timing (ignored).
189 12 69 Bit coded register:
190 Bit 0: 0 = Suppress response messages.
191 1 = Show response messages.
192 Bit 1: 0 = English response messages.
193 1 = Numeric response messages.
194 Bit 2: 0 = Echo off.
195 1 = Echo on.
196 Bit 3 0 = DCD always on.
197 1 = DCD follows carrier.
198 Bit 4 0 = CTS follows RTS
199 1 = Ignore RTS, CTS always on.
200 Bit 5 0 = return to command mode on DTR low.
201 1 = Same as 0 but also resets all
202 registers.
203 See also register 13, bit 2
204 Bit 6 0 = DSR always on.
205 1 = DSR only on if channel is available.
206 Bit 7 0 = Cisco-PPP-flag-hack off (default).
207 1 = Cisco-PPP-flag-hack on.
208 13 0 Bit coded register:
209 Bit 0: 0 = Use delayed tty-send-algorithm
210 1 = Direct tty-send.
211 Bit 1: 0 = T.70 protocol (Only for BTX!) off
212 1 = T.70 protocol (Only for BTX!) on
213 Bit 2: 0 = Don't hangup on DTR low.
214 1 = Hangup on DTR low.
215 Bit 3: 0 = Standard response messages
216 1 = Extended response messages
217 Bit 4: 0 = CALLER NUMBER before every RING.
218 1 = CALLER NUMBER after first RING.
219 Bit 5: 0 = T.70 extended protocol off
220 1 = T.70 extended protocol on
221 Bit 6: 0 = Special RUNG Message off
222 1 = Special RUNG Message on
223 "RUNG" is delivered on a ttyI, if
224 an incoming call happened (RING) and
225 the remote party hung up before any
226 local ATA was given.
227 Bit 7: 0 = Don't show display messages from net
228 1 = Show display messages from net
229 (S12 Bit 1 must be 0 too)
230 14 0 Layer-2 protocol:
231 0 = X75/LAPB with I-frames
232 1 = X75/LAPB with UI-frames
233 2 = X75/LAPB with BUI-frames
234 3 = HDLC
235 4 = Transparent (audio)
236 7 = V.110, 9600 baud
237 8 = V.110, 19200 baud
238 9 = V.110, 38400 baud
239 10 = Analog Modem (only if hardware supports this)
240 11 = Fax G3 (only if hardware supports this)
241 15 0 Layer-3 protocol:
242 0 = transparent
243 1 = transparent with audio features (e.g. DSP)
244 2 = Fax G3 Class 2 commands (S14 has to be set to 11)
245 3 = Fax G3 Class 1 commands (S14 has to be set to 11)
246 16 250 Send-Packet-size/16
247 17 8 Window-size (not yet implemented)
248 18 4 Bit coded register, Service-Octet-1 to accept,
249 or to be used on dialout:
250 Bit 0: Service 1 (audio) when set.
251 Bit 1: Service 5 (BTX) when set.
252 Bit 2: Service 7 (data) when set.
253 Note: It is possible to set more than one
254 bit. In this case, on incoming calls
255 the selected services are accepted,
256 and if the service is "audio", the
257 Layer-2-protocol is automatically
258 changed to 4 regardless of the setting
259 of register 14. On outgoing calls,
260 the most significant 1-bit is chosen to
261 select the outgoing service octet.
262 19 0 Service-Octet-2
263 20 0 Bit coded register (readonly)
264 Service-Octet-1 of last call.
265 Bit mapping is the same as register 18
266 21 0 Bit coded register (readonly)
267 Set on incoming call (during RING) to
268 octet 3 of calling party number IE (Numbering plan)
269 See section 4.5.10 of ITU Q.931
270 22 0 Bit coded register (readonly)
271 Set on incoming call (during RING) to
272 octet 3a of calling party number IE (Screening info)
273 See section 4.5.10 of ITU Q.931
274 23 0 Bit coded register:
275 Bit 0: 0 = Add CPN to RING message off
276 1 = Add CPN to RING message on
277 Bit 1: 0 = Add CPN to FCON message off
278 1 = Add CPN to FCON message on
279 Bit 2: 0 = Add CDN to RING/FCON message off
280 1 = Add CDN to RING/FCON message on
281
282 Last but not least a (at the moment fairly primitive) device to request
283 the line-status (/dev/isdninfo) is made available.
284
285 Automatic assignment of devices to lines:
286
287 All inactive physical lines are listening to all EAZs for incoming
288 calls and are NOT assigned to a specific tty or network interface.
289 When an incoming call is detected, the driver looks first for a network
290 interface and then for an opened tty which:
291
292 1. is configured for the same EAZ.
293 2. has the same protocol settings for the B-channel.
294 3. (only for network interfaces if the security flag is set)
295 contains the caller number in its access list.
296 4. Either the channel is not bound exclusively to another Net-interface, or
297 it is bound AND the other checks apply to exactly this interface.
298 (For usage of the bind-features, refer to the isdnctrl-man-page)
299
300 Only when a matching interface or tty is found is the call accepted
301 and the "connection" between the low-level-layer and the link-level-layer
302 is established and kept until the end of the connection.
303 In all other cases no connection is established. Isdn4linux can be
304 configured to either do NOTHING in this case (which is useful, if
305 other, external devices with the same EAZ/MSN are connected to the bus)
306 or to reject the call actively. (isdnctrl busreject ...)
307
308 For an outgoing call, the inactive physical lines are searched.
309 The call is placed on the first physical line, which supports the
310 requested protocols for the B-channel. If a net-interface, however
311 is pre-bound to a channel, this channel is used directly.
312
313 This makes it possible to configure several network interfaces and ttys
314 for one EAZ, if the network interfaces are set to secure operation.
315 If an incoming call matches one network interface, it gets connected to it.
316 If another incoming call for the same EAZ arrives, which does not match
317 a network interface, the first tty gets a "RING" and so on.
318
3192 System prerequisites:
320
321 ATTENTION!
322
323 Always use the latest module utilities. The current version is
324 named in Documentation/Changes. Some old versions of insmod
325 are not capable of setting the driver-Ids correctly.
326
3273. Lowlevel-driver configuration.
328
329 Configuration depends on how the drivers are built. See the
330 README.<yourDriver> for information on driver-specific setup.
331
3324. Device-inodes
333
334 The major and minor numbers and their names are described in
335 Documentation/devices.txt. The major numbers are:
336
337 43 for the ISDN-tty's.
338 44 for the ISDN-callout-tty's.
339 45 for control/info/debug devices.
340
3415. Application
342
343 a) For some card-types, firmware has to be loaded into the cards, before
344 proceeding with device-independent setup. See README.<yourDriver>
345 for how to do that.
346
347 b) If you only intend to use ttys, you are nearly ready now.
348
349 c) If you want to have really permanent "Modem"-settings on disk, you
350 can start the daemon iprofd. Give it a path to a file at the command-
351 line. It will store the profile-settings in this file every time
352 an AT&W0 is performed on any ISDN-tty. If the file already exists,
353 all profiles are initialized from this file. If you want to unload
354 any of the modules, kill iprofd first.
355
356 d) For networking, continue: Create an interface:
357 isdnctrl addif isdn0
358
359 e) Set the EAZ (or MSN for Euro-ISDN):
360 isdnctrl eaz isdn0 2
361
362 (For 1TR6 a single digit is allowed, for Euro-ISDN the number is your
363 real MSN e.g.: Phone-Number)
364
365 f) Set the number for outgoing calls on the interface:
366 isdnctrl addphone isdn0 out 1234567
367 ... (this can be executed more than once, all assigned numbers are
368 tried in order)
369 and the number(s) for incoming calls:
370 isdnctrl addphone isdn0 in 1234567
371
372 g) Set the timeout for hang-up:
373 isdnctrl huptimeout isdn0 <timeout_in_seconds>
374
375 h) additionally you may activate charge-hang-up (= Hang up before
376 next charge-info, this only works, if your isdn-provider transmits
377 the charge-info during and after the connection):
378 isdnctrl chargehup isdn0 on
379
380 i) Set the dial mode of the interface:
381 isdnctrl dialmode isdn0 auto
382 "off" means that you (or the system) cannot make any connection
383 (neither incoming or outgoing connections are possible). Use
384 this if you want to be sure that no connections will be made.
385 "auto" means that the interface is in auto-dial mode, and will
386 attempt to make a connection whenever a network data packet needs
387 the interface's link. Note that this can cause unexpected dialouts,
388 and lead to a high phone bill! Some daemons or other pc's that use
389 this interface can cause this.
390 Incoming connections are also possible.
391 "manual" is a dial mode created to prevent the unexpected dialouts.
392 In this mode, the interface will never make any connections on its
393 own. You must explicitly initiate a connection with "isdnctrl dial
394 isdn0". However, after an idle time of no traffic as configured for
395 the huptimeout value with isdnctrl, the connection _will_ be ended.
396 If you don't want any automatic hangup, set the huptimeout value to 0.
397 "manual" is the default.
398
399 j) Setup the interface with ifconfig as usual, and set a route to it.
400
401 k) (optional) If you run X11 and have Tcl/Tk-wish version 4.0, you can use
402 the script tools/tcltk/isdnmon. You can add actions for line-status
403 changes. See the comments at the beginning of the script for how to
404 do that. There are other tty-based tools in the tools-subdirectory
405 contributed by Michael Knigge (imon), Volker Götz (imontty) and
406 Andreas Kool (isdnmon).
407
408 l) For initial testing, you can set the verbose-level to 2 (default: 0).
409 Then all incoming calls are logged, even if they are not addressed
410 to one of the configured net-interfaces:
411 isdnctrl verbose 2
412
413 Now you are ready! A ping to the set address should now result in an
414 automatic dial-out (look at syslog kernel-messages).
415 The phone numbers and EAZs can be assigned at any time with isdnctrl.
416 You can add as many interfaces as you like with addif following the
417 directions above. Of course, there may be some limitations. But we have
418 tested as many as 20 interfaces without any problem. However, if you
419 don't give an interface name to addif, the kernel will assign a name
420 which starts with "eth". The number of "eth"-interfaces is limited by
421 the kernel.
422
4235. Additional options for isdnctrl:
424
425 "isdnctrl secure <InterfaceName> on"
426 Only incoming calls, for which the caller-id is listed in the access
427 list of the interface are accepted. You can add caller-id's With the
428 command "isdnctrl addphone <InterfaceName> in <caller-id>"
429 Euro-ISDN does not transmit the leading '0' of the caller-id for an
430 incoming call, therefore you should configure it accordingly.
431 If the real number for the dialout e.g. is "09311234567" the number
432 to configure here is "9311234567". The pattern-match function
433 works similar to the shell mechanism.
434
435 ? one arbitrary digit
436 * zero or arbitrary many digits
437 [123] one of the digits in the list
438 [1-5] one digit between '1' and '5'
439 a '^' as the first character in a list inverts the list
440
441
442 "isdnctrl secure <InterfaceName> off"
443 Switch off secure operation (default).
444
445 "isdnctrl ihup <InterfaceName> [on|off]"
446 Switch the hang-up-timer for incoming calls on or off.
447
448 "isdnctrl eaz <InterfaceName>"
449 Returns the EAZ of an interface.
450
451 "isdnctrl delphone <InterfaceName> in|out <number>"
452 Deletes a number from one of the access-lists of the interface.
453
454 "isdnctrl delif <InterfaceName>"
455 Removes the interface (and possible slaves) from the kernel.
456 (You have to unregister it with "ifconfig <InterfaceName> down" before).
457
458 "isdnctrl callback <InterfaceName> [on|off]"
459 Switches an interface to callback-mode. In this mode, an incoming call
460 will be rejected and after this the remote-station will be called. If
461 you test this feature by using ping, some routers will re-dial very
462 quickly, so that the callback from isdn4linux may not be recognized.
463 In this case use ping with the option -i <sec> to increase the interval
464 between echo-packets.
465
466 "isdnctrl cbdelay <InterfaceName> [seconds]"
467 Sets the delay (default 5 sec) between an incoming call and start of
468 dialing when callback is enabled.
469
470 "isdnctrl cbhup <InterfaceName> [on|off]"
471 This enables (default) or disables an active hangup (reject) when getting an
472 incoming call for an interface which is configured for callback.
473
474 "isdnctrl encap <InterfaceName> <EncapType>"
475 Selects the type of packet-encapsulation. The encapsulation can be changed
476 only while an interface is down.
477
478 At the moment the following values are supported:
479
480 rawip (Default) Selects raw-IP-encapsulation. This means, MAC-headers
481 are stripped off.
482 ip IP with type-field. Same as IP but the type-field of the MAC-header
483 is preserved.
484 x25iface X.25 interface encapsulation (first byte semantics as defined in
485 ../networking/x25-iface.txt). Use this for running the linux
486 X.25 network protocol stack (AF_X25 sockets) on top of isdn.
487 cisco-h A special-mode for communicating with a Cisco, which is configured
488 to do "hdlc"
489 ethernet No stripping. Packets are sent with full MAC-header.
490 The Ethernet-address of the interface is faked, from its
491 IP-address: fc:fc:i1:i2:i3:i4, where i1-4 are the IP-addr.-values.
492 syncppp Synchronous PPP
493
494 uihdlc HDLC with UI-frame-header (for use with DOS ISPA, option -h1)
495
496
497 NOTE: x25iface encapsulation is currently experimental. Please
498 read README.x25 for further details
499
500
501 Watching packets, using standard-tcpdump will fail for all encapsulations
502 except ethernet because tcpdump does not know how to handle packets
503 without MAC-header. A patch for tcpdump is included in the utility-package
504 mentioned above.
505
506 "isdnctrl l2_prot <InterfaceName> <L2-ProtocolName>"
507 Selects a layer-2-protocol.
508 (With the ICN-driver and the HiSax-driver, "x75i" and "hdlc" is available.
509 With other drivers, "x75ui", "x75bui", "x25dte", "x25dce" may be
510 possible too. See README.x25 for x25 related l2 protocols.)
511
512 isdnctrl l3_prot <InterfaceName> <L3-ProtocolName>
513 The same for layer-3. (At the moment only "trans" is allowed)
514
515 "isdnctrl list <InterfaceName>"
516 Shows all parameters of an interface and the charge-info.
517 Try "all" as the interface name.
518
519 "isdnctrl hangup <InterfaceName>"
520 Forces hangup of an interface.
521
522 "isdnctrl bind <InterfaceName> <DriverId>,<ChannelNumber> [exclusive]"
523 If you are using more than one ISDN card, it is sometimes necessary to
524 dial out using a specific card or even preserve a specific channel for
525 dialout of a specific net-interface. This can be done with the above
526 command. Replace <DriverId> by whatever you assigned while loading the
527 module. The <ChannelNumber> is counted from zero. The upper limit
528 depends on the card used. At the moment no card supports more than
529 2 channels, so the upper limit is one.
530
531 "isdnctrl unbind <InterfaceName>"
532 unbinds a previously bound interface.
533
534 "isdnctrl busreject <DriverId> on|off"
535 If switched on, isdn4linux replies a REJECT to incoming calls, it
536 cannot match to any configured interface.
537 If switched off, nothing happens in this case.
538 You normally should NOT enable this feature, if the ISDN adapter is not
539 the only device connected to the S0-bus. Otherwise it could happen that
540 isdn4linux rejects an incoming call, which belongs to another device on
541 the bus.
542
543 "isdnctrl addslave <InterfaceName> <SlaveName>
544 Creates a slave interface for channel-bundling. Slave interfaces are
545 not seen by the kernel, but their ISDN-part can be configured with
546 isdnctrl as usual. (Phone numbers, EAZ/MSN, timeouts etc.) If more
547 than two channels are to be bundled, feel free to create as many as you
548 want. InterfaceName must be a real interface, NOT a slave. Slave interfaces
549 start dialing, if the master interface resp. the previous slave interface
550 has a load of more than 7000 cps. They hangup if the load goes under 7000
551 cps, according to their "huptimeout"-parameter.
552
553 "isdnctrl sdelay <InterfaceName> secs."
554 This sets the minimum time an Interface has to be fully loaded, until
555 it sends a dial-request to its slave.
556
557 "isdnctrl dial <InterfaceName>"
558 Forces an interface to start dialing even if no packets are to be
559 transferred.
560
561 "isdnctrl mapping <DriverId> MSN0,MSN1,MSN2,...MSN9"
562 This installs a mapping table for EAZ<->MSN-mapping for a single line.
563 Missing MSN's have to be given as "-" or can be omitted, if at the end
564 of the commandline.
565 With this command, it's now possible to have an interface listening to
566 mixed 1TR6- and Euro-Type lines. In this case, the interface has to be
567 configured to a 1TR6-type EAZ (one digit). The mapping is also valid
568 for tty-emulation. Seen from the interface/tty-level the mapping
569 CAN be used, however it's possible to use single tty's/interfaces with
570 real MSN's (more digits) also, in which case the mapping will be ignored.
571 Here is an example:
572
573 You have a 1TR6-type line with base-nr. 1234567 and a Euro-line with
574 MSN's 987654, 987655 and 987656. The DriverId for the Euro-line is "EURO".
575
576 isdnctrl mapping EURO -,987654,987655,987656,-,987655
577 ...
578 isdnctrl eaz isdn0 1 # listen on 12345671(1tr6) and 987654(euro)
579 ...
580 isdnctrl eaz isdn1 4 # listen on 12345674(1tr6) only.
581 ...
582 isdnctrl eaz isdn2 987654 # listen on 987654(euro) only.
583
584 Same scheme is used with AT&E... at the tty's.
585
5866. If you want to write a new low-level-driver, you are welcome.
587 The interface to the link-level-module is described in the file INTERFACE.
588 If the interface should be expanded for any reason, don't do it
589 on your own, send me a mail containing the proposed changes and
590 some reasoning about them.
591 If other drivers will not be affected, I will include the changes
592 in the next release.
593 For developers only, there is a second mailing-list. Write to me
594 (fritz@isdn4linux.de), if you want to join that list.
595
596Have fun!
597
598 -Fritz
599
diff --git a/Documentation/isdn/README.FAQ b/Documentation/isdn/README.FAQ
new file mode 100644
index 000000000000..356f7944641d
--- /dev/null
+++ b/Documentation/isdn/README.FAQ
@@ -0,0 +1,26 @@
1
2The FAQ for isdn4linux
3======================
4
5Please note that there is a big FAQ available in the isdn4k-utils.
6You find it in:
7 isdn4k-utils/FAQ/i4lfaq.sgml
8
9In case you just want to see the FAQ online, or download the newest version,
10you can have a look at my website:
11http://www.mhessler.de/i4lfaq/ (view + download)
12or:
13http://www.isdn4linux.de/faq/ (view)
14
15As the extension tells, the FAQ is in SGML format, and you can convert it
16into text/html/... format by using the sgml2txt/sgml2html/... tools.
17Alternatively, you can also do a 'configure; make all' in the FAQ directory.
18
19
20Please have a look at the FAQ before posting anything in the Mailinglist,
21or the newsgroup!
22
23
24Matthias Hessler
25hessler@isdn4linux.de
26
diff --git a/Documentation/isdn/README.HiSax b/Documentation/isdn/README.HiSax
new file mode 100644
index 000000000000..031c8d814337
--- /dev/null
+++ b/Documentation/isdn/README.HiSax
@@ -0,0 +1,659 @@
1HiSax is a Linux hardware-level driver for passive ISDN cards with Siemens
2chipset (ISAC_S 2085/2086/2186, HSCX SAB 82525). It is based on the Teles
3driver from Jan den Ouden.
4It is meant to be used with isdn4linux, an ISDN link-level module for Linux
5written by Fritz Elfert.
6
7 This program is free software; you can redistribute it and/or modify
8 it under the terms of the GNU General Public License as published by
9 the Free Software Foundation; either version 2 of the License, or
10 (at your option) any later version.
11
12 This program is distributed in the hope that it will be useful,
13 but WITHOUT ANY WARRANTY; without even the implied warranty of
14 MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
15 GNU General Public License for more details.
16
17 You should have received a copy of the GNU General Public License
18 along with this program; if not, write to the Free Software
19 Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
20
21
22Supported cards
23---------------
24
25Teles 8.0/16.0/16.3 and compatible ones
26Teles 16.3c
27Teles S0/PCMCIA
28Teles PCI
29Teles S0Box
30Creatix S0Box
31Creatix PnP S0
32Compaq ISDN S0 ISA card
33AVM A1 (Fritz, Teledat 150)
34AVM Fritz PCMCIA
35AVM Fritz PnP
36AVM Fritz PCI
37ELSA Microlink PCC-16, PCF, PCF-Pro, PCC-8
38ELSA Quickstep 1000
39ELSA Quickstep 1000PCI
40ELSA Quickstep 3000 (same settings as QS1000)
41ELSA Quickstep 3000PCI
42ELSA PCMCIA
43ITK ix1-micro Rev.2
44Eicon Diva 2.0 ISA and PCI (S0 and U interface, no PRO version)
45Eicon Diva 2.01 ISA and PCI
46Eicon Diva 2.02 PCI
47Eicon Diva Piccola
48ASUSCOM NETWORK INC. ISDNLink 128K PC adapter (order code I-IN100-ST-D)
49Dynalink IS64PH (OEM version of ASUSCOM NETWORK INC. ISDNLink 128K adapter)
50PCBIT-DP (OEM version of ASUSCOM NETWORK INC. ISDNLink)
51HFC-2BS0 based cards (TeleInt SA1)
52Sedlbauer Speed Card (Speed Win, Teledat 100, PCI, Fax+)
53Sedlbauer Speed Star/Speed Star2 (PCMCIA)
54Sedlbauer ISDN-Controller PC/104
55USR Sportster internal TA (compatible Stollmann tina-pp V3)
56USR internal TA PCI
57ith Kommunikationstechnik GmbH MIC 16 ISA card
58Traverse Technologie NETjet PCI S0 card and NETspider U card
59Ovislink ISDN sc100-p card (NETjet driver)
60Dr. Neuhaus Niccy PnP/PCI
61Siemens I-Surf 1.0
62Siemens I-Surf 2.0 (with IPAC, try type 12 asuscom)
63ACER P10
64HST Saphir
65Berkom Telekom A4T
66Scitel Quadro
67Gazel ISDN cards
68HFC-PCI based cards
69Winbond W6692 based cards
70HFC-S+, HFC-SP/PCMCIA cards
71formula-n enternow
72Gerdes Power ISDN
73
74Note: PCF, PCF-Pro: up to now, only the ISDN part is supported
75 PCC-8: not tested yet
76 Eicon.Diehl Diva U interface not tested
77
78If you know other passive cards with the Siemens chipset, please let me know.
79You can combine any card, if there is no conflict between the resources
80(io, mem, irq).
81
82
83Configuring the driver
84----------------------
85
86The HiSax driver can either be built directly into the kernel or as a module.
87It can be configured using the command line feature while loading the kernel
88with LILO or LOADLIN or, if built as a module, using insmod/modprobe with
89parameters.
90There is also some config needed before you compile the kernel and/or
91modules. It is included in the normal "make [menu]config" target at the
92kernel. Don't forget it, especially to select the right D-channel protocol.
93
94Please note: In older versions of the HiSax driver, all PnP cards
95needed to be configured with isapnp and worked only with the HiSax
96driver used as a module.
97
98In the current version, HiSax will automatically use the in-kernel
99ISAPnP support, provided you selected it during kernel configuration
100(CONFIG_ISAPNP), if you don't give the io=, irq= command line parameters.
101
102The affected card types are: 4,7,12,14,19,27-30
103
104a) when built as a module
105-------------------------
106
107insmod/modprobe hisax.o \
108 io=iobase irq=IRQ mem=membase type=card_type \
109 protocol=D_channel_protocol id=idstring
110
111or, if several cards are installed:
112
113insmod/modprobe hisax.o \
114 io=iobase1,iobase2,... irq=IRQ1,IRQ2,... mem=membase1,membase2,... \
115 type=card_type1,card_type2,... \
116 protocol=D_channel_protocol1,D_channel_protocol2,... \
117 id=idstring1%idstring2 ...
118
119where "iobaseN" represents the I/O base address of the Nth card, "membaseN"
120the memory base address of the Nth card, etc.
121
122The reason for the delimiter "%" being used in the idstrings is that ","
123won't work with the current modules package.
124
125The parameters may be specified in any order. For example, the "io"
126parameter may precede the "irq" parameter, or vice versa. If several
127cards are installed, the ordering within the comma separated parameter
128lists must of course be consistent.
129
130Only parameters applicable to the card type need to be specified. For
131example, the Teles 16.3 card is not memory-mapped, so the "mem"
132parameter may be omitted for this card. Sometimes it may be necessary
133to specify a dummy parameter, however. This is the case when there is
134a card of a different type later in the list that needs a parameter
135which the preceding card does not. For instance, if a Teles 16.0 card
136is listed after a Teles 16.3 card, a dummy memory base parameter of 0
137must be specified for the 16.3. Instead of a dummy value, the parameter
138can also be skipped by simply omitting the value. For example:
139mem=,0xd0000. See example 6 below.
140
141The parameter for the D-Channel protocol may be omitted if you selected the
142correct one during kernel config. Valid values are "1" for German 1TR6,
143"2" for EDSS1 (Euro ISDN), "3" for leased lines (no D-Channel) and "4"
144for US NI1.
145With US NI1 you have to include your SPID into the MSN setting in the form
146<MSN>:<SPID> for example (your phonenumber is 1234 your SPID 5678):
147AT&E1234:5678 on ttyI interfaces
148isdnctrl eaz ippp0 1234:5678 on network devices
149
150The Creatix/Teles PnP cards use io1= and io2= instead of io= for specifying
151the I/O addresses of the ISAC and HSCX chips, respectively.
152
153Card types:
154
155 Type Required parameters (in addition to type and protocol)
156
157 1 Teles 16.0 irq, mem, io
158 2 Teles 8.0 irq, mem
159 3 Teles 16.3 (non PnP) irq, io
160 4 Creatix/Teles PnP irq, io0 (ISAC), io1 (HSCX)
161 5 AVM A1 (Fritz) irq, io
162 6 ELSA PCC/PCF cards io or nothing for autodetect (the iobase is
163 required only if you have more than one ELSA
164 card in your PC)
165 7 ELSA Quickstep 1000 irq, io (from isapnp setup)
166 8 Teles 16.3 PCMCIA irq, io
167 9 ITK ix1-micro Rev.2 irq, io
168 10 ELSA PCMCIA irq, io (set with card manager)
169 11 Eicon.Diehl Diva ISA PnP irq, io
170 11 Eicon.Diehl Diva PCI no parameter
171 12 ASUS COM ISDNLink irq, io (from isapnp setup)
172 13 HFC-2BS0 based cards irq, io
173 14 Teles 16.3c PnP irq, io
174 15 Sedlbauer Speed Card irq, io
175 15 Sedlbauer PC/104 irq, io
176 15 Sedlbauer Speed PCI no parameter
177 16 USR Sportster internal irq, io
178 17 MIC card irq, io
179 18 ELSA Quickstep 1000PCI no parameter
180 19 Compaq ISDN S0 ISA card irq, io0, io1, io (from isapnp setup io=IO2)
181 20 NETjet PCI card no parameter
182 21 Teles PCI no parameter
183 22 Sedlbauer Speed Star (PCMCIA) irq, io (set with card manager)
184 24 Dr. Neuhaus Niccy PnP irq, io0, io1 (from isapnp setup)
185 24 Dr. Neuhaus Niccy PCI no parameter
186 25 Teles S0Box irq, io (of the used lpt port)
187 26 AVM A1 PCMCIA (Fritz!) irq, io (set with card manager)
188 27 AVM PnP (Fritz!PnP) irq, io (from isapnp setup)
189 27 AVM PCI (Fritz!PCI) no parameter
190 28 Sedlbauer Speed Fax+ irq, io (from isapnp setup)
191 29 Siemens I-Surf 1.0 irq, io, memory (from isapnp setup)
192 30 ACER P10 irq, io (from isapnp setup)
193 31 HST Saphir irq, io
194 32 Telekom A4T none
195 33 Scitel Quadro subcontroller (4*S0, subctrl 1...4)
196 34 Gazel ISDN cards (ISA) irq,io
197 34 Gazel ISDN cards (PCI) none
198 35 HFC 2BDS0 PCI none
199 36 W6692 based PCI cards none
200 37 HFC 2BDS0 S+, SP irq,io
201 38 NETspider U PCI card none
202 39 HFC 2BDS0 SP/PCMCIA irq,io (set with cardmgr)
203 40 hotplug interface
204 41 Formula-n enter:now PCI none
205
206At the moment IRQ sharing is only possible with PCI cards. Please make sure
207that your IRQ is free and enabled for ISA use.
208
209
210Examples for module loading
211
2121. Teles 16.3, Euro ISDN, I/O base 280 hex, IRQ 10
213 modprobe hisax type=3 protocol=2 io=0x280 irq=10
214
2152. Teles 16.0, 1TR6 ISDN, I/O base d80 hex, IRQ 5, Memory d0000 hex
216 modprobe hisax protocol=1 type=1 io=0xd80 mem=0xd0000 irq=5
217
2183. Fritzcard, Euro ISDN, I/O base 340 hex, IRQ 10 and ELSA PCF, Euro ISDN
219 modprobe hisax type=5,6 protocol=2,2 io=0x340 irq=10 id=Fritz%Elsa
220
2214. Any ELSA PCC/PCF card, Euro ISDN
222 modprobe hisax type=6 protocol=2
223
2245. Teles 16.3 PnP, Euro ISDN, with isapnp configured
225 isapnp config: (INT 0 (IRQ 10 (MODE +E)))
226 (IO 0 (BASE 0x0580))
227 (IO 1 (BASE 0x0180))
228 modprobe hisax type=4 protocol=2 irq=10 io0=0x580 io1=0x180
229
230 In the current version of HiSax, you can instead simply use
231
232 modprobe hisax type=4 protocol=2
233
234 if you configured your kernel for ISAPnP. Don't run isapnp in
235 this case!
236
2376. Teles 16.3, Euro ISDN, I/O base 280 hex, IRQ 12 and
238 Teles 16.0, 1TR6, IRQ 5, Memory d0000 hex
239 modprobe hisax type=3,1 protocol=2,1 io=0x280 mem=0,0xd0000
240
241 Please note the dummy 0 memory address for the Teles 16.3, used as a
242 placeholder as described above, in the last example.
243
2447. Teles PCMCIA, Euro ISDN, I/O base 180 hex, IRQ 15 (default values)
245 modprobe hisax type=8 protocol=2 io=0x180 irq=15
246
247
248b) using LILO/LOADLIN, with the driver compiled directly into the kernel
249------------------------------------------------------------------------
250
251hisax=typ1,dp1,pa_1,pb_1,pc_1[,typ2,dp2,pa_2 ... \
252 typn,dpn,pa_n,pb_n,pc_n][,idstring1[,idstring2,...,idstringn]]
253
254where
255 typ1 = type of 1st card (default depends on kernel settings)
256 dp1 = D-Channel protocol of 1st card. 1=1TR6, 2=EDSS1, 3=leased
257 pa_1 = 1st parameter (depending on the type of the card)
258 pb_1 = 2nd parameter ( " " " " " " " )
259 pc_1 = 3rd parameter ( " " " " " " " )
260
261 typ2,dp2,pa_2,pb_2,pc_2 = Parameters of the second card (defaults: none)
262 typn,dpn,pa_n,pb_n,pc_n = Parameters of the n'th card (up to 16 cards are
263 supported)
264
265 idstring = Driver ID for accessing the particular card with utility
266 programs and for identification when using a line monitor
267 (default: "HiSax")
268
269 Note: the ID string must start with an alphabetical character!
270
271Card types:
272
273type
274 1 Teles 16.0 pa=irq pb=membase pc=iobase
275 2 Teles 8.0 pa=irq pb=membase
276 3 Teles 16.3 pa=irq pb=iobase
277 4 Creatix/Teles PNP ONLY WORKS AS A MODULE !
278 5 AVM A1 (Fritz) pa=irq pb=iobase
279 6 ELSA PCC/PCF cards pa=iobase or nothing for autodetect
280 7 ELSA Quickstep 1000 ONLY WORKS AS A MODULE !
281 8 Teles S0 PCMCIA pa=irq pb=iobase
282 9 ITK ix1-micro Rev.2 pa=irq pb=iobase
283 10 ELSA PCMCIA pa=irq, pb=io (set with card manager)
284 11 Eicon.Diehl Diva ISAPnP ONLY WORKS AS A MODULE !
285 11 Eicon.Diehl Diva PCI no parameter
286 12 ASUS COM ISDNLink ONLY WORKS AS A MODULE !
287 13 HFC-2BS0 based cards pa=irq pb=io
288 14 Teles 16.3c PnP ONLY WORKS AS A MODULE !
289 15 Sedlbauer Speed Card pa=irq pb=io (Speed Win only as module !)
290 15 Sedlbauer PC/104 pa=irq pb=io
291 15 Sedlbauer Speed PCI no parameter
292 16 USR Sportster internal pa=irq pb=io
293 17 MIC card pa=irq pb=io
294 18 ELSA Quickstep 1000PCI no parameter
295 19 Compaq ISDN S0 ISA card ONLY WORKS AS A MODULE !
296 20 NETjet PCI card no parameter
297 21 Teles PCI no parameter
298 22 Sedlbauer Speed Star (PCMCIA) pa=irq, pb=io (set with card manager)
299 24 Dr. Neuhaus Niccy PnP ONLY WORKS AS A MODULE !
300 24 Dr. Neuhaus Niccy PCI no parameter
301 25 Teles S0Box pa=irq, pb=io (of the used lpt port)
302 26 AVM A1 PCMCIA (Fritz!) pa=irq, pb=io (set with card manager)
303 27 AVM PnP (Fritz!PnP) ONLY WORKS AS A MODULE !
304 27 AVM PCI (Fritz!PCI) no parameter
305 28 Sedlbauer Speed Fax+ ONLY WORKS AS A MODULE !
306 29 Siemens I-Surf 1.0 ONLY WORKS AS A MODULE !
307 30 ACER P10 ONLY WORKS AS A MODULE !
308 31 HST Saphir pa=irq, pb=io
309 32 Telekom A4T no parameter
310 33 Scitel Quadro subcontroller (4*S0, subctrl 1...4)
311 34 Gazel ISDN cards (ISA) pa=irq, pb=io
312 34 Gazel ISDN cards (PCI) no parameter
313 35 HFC 2BDS0 PCI no parameter
314 36 W6692 based PCI cards none
315 37 HFC 2BDS0 S+,SP/PCMCIA ONLY WORKS AS A MODULE !
316 38 NETspider U PCI card none
317 39 HFC 2BDS0 SP/PCMCIA ONLY WORKS AS A MODULE !
318 40 hotplug interface ONLY WORKS AS A MODULE !
319 41 Formula-n enter:now PCI none
320
321Running the driver
322------------------
323
324When you insmod isdn.o and hisax.o (or with the in-kernel version, during
325boot time), a few lines should appear in your syslog. Look for something like:
326
327Apr 13 21:01:59 kke01 kernel: HiSax: Driver for Siemens chip set ISDN cards
328Apr 13 21:01:59 kke01 kernel: HiSax: Version 2.9
329Apr 13 21:01:59 kke01 kernel: HiSax: Revisions 1.14/1.9/1.10/1.25/1.8
330Apr 13 21:01:59 kke01 kernel: HiSax: Total 1 card defined
331Apr 13 21:01:59 kke01 kernel: HiSax: Card 1 Protocol EDSS1 Id=HiSax1 (0)
332Apr 13 21:01:59 kke01 kernel: HiSax: Elsa driver Rev. 1.13
333...
334Apr 13 21:01:59 kke01 kernel: Elsa: PCF-Pro found at 0x360 Rev.:C IRQ 10
335Apr 13 21:01:59 kke01 kernel: Elsa: timer OK; resetting card
336Apr 13 21:01:59 kke01 kernel: Elsa: HSCX version A: V2.1 B: V2.1
337Apr 13 21:01:59 kke01 kernel: Elsa: ISAC 2086/2186 V1.1
338...
339Apr 13 21:01:59 kke01 kernel: HiSax: DSS1 Rev. 1.14
340Apr 13 21:01:59 kke01 kernel: HiSax: 2 channels added
341
342This means that the card is ready for use.
343Cabling problems or line-downs are not detected, and only some ELSA cards can
344detect the S0 power.
345
346Remember that, according to the new strategy for accessing low-level drivers
347from within isdn4linux, you should also define a driver ID while doing
348insmod: Simply append hisax_id=<SomeString> to the insmod command line. This
349string MUST NOT start with a digit or a small 'x'!
350
351At this point you can run a 'cat /dev/isdnctrl0' and view debugging messages.
352
353At the moment, debugging messages are enabled with the hisaxctrl tool:
354
355 hisaxctrl <DriverId> DebugCmd <debugging_flags>
356
357<DriverId> default is HiSax, if you didn't specify one.
358
359DebugCmd is 1 for generic debugging
360 11 for layer 1 development debugging
361 13 for layer 3 development debugging
362
363where <debugging_flags> is the integer sum of the following debugging
364options you wish enabled:
365
366With DebugCmd set to 1:
367
368 0x0001 Link-level <--> hardware-level communication
369 0x0002 Top state machine
370 0x0004 D-Channel Frames for isdnlog
371 0x0008 D-Channel Q.921
372 0x0010 B-Channel X.75
373 0x0020 D-Channel l2
374 0x0040 B-Channel l2
375 0x0080 D-Channel link state debugging
376 0x0100 B-Channel link state debugging
377 0x0200 TEI debug
378 0x0400 LOCK debug in callc.c
379 0x0800 More paranoid debug in callc.c (not for normal use)
380 0x1000 D-Channel l1 state debugging
381 0x2000 B-Channel l1 state debugging
382
383With DebugCmd set to 11:
384
385 0x0001 Warnings (default: on)
386 0x0002 IRQ status
387 0x0004 ISAC
388 0x0008 ISAC FIFO
389 0x0010 HSCX
390 0x0020 HSCX FIFO (attention: full B-Channel output!)
391 0x0040 D-Channel LAPD frame types
392 0x0080 IPAC debug
393 0x0100 HFC receive debug
394 0x0200 ISAC monitor debug
395 0x0400 D-Channel frames for isdnlog (set with 1 0x4 too)
396 0x0800 D-Channel message verbose
397
398With DebugCmd set to 13:
399
400 1 Warnings (default: on)
401 2 l3 protocol descriptor errors
402 4 l3 state machine
403 8 charge info debugging (1TR6)
404
405For example, 'hisaxctrl HiSax 1 0x3ff' enables full generic debugging.
406
407Because of some obscure problems with some switch equipment, the delay
408between the CONNECT message and sending the first data on the B-channel is now
409configurable with
410
411hisaxctrl <DriverId> 2 <delay>
412<delay> in ms Value between 50 and 800 ms is recommended.
413
414Downloading Firmware
415--------------------
416At the moment, the Sedlbauer speed fax+ is the only card, which
417needs to download firmware.
418The firmware is downloaded with the hisaxctrl tool:
419
420 hisaxctrl <DriverId> 9 <firmware_filename>
421
422<DriverId> default is HiSax, if you didn't specify one,
423
424where <firmware_filename> is the filename of the firmware file.
425
426For example, 'hisaxctrl HiSax 9 ISAR.BIN' downloads the firmware for
427ISAR based cards (like the Sedlbauer speed fax+).
428
429Warning
430-------
431HiSax is a work in progress and may crash your machine.
432For certification look at HiSax.cert file.
433
434Limitations
435-----------
436At this time, HiSax only works on Euro ISDN lines and German 1TR6 lines.
437For leased lines see appendix.
438
439Bugs
440----
441If you find any, please let me know.
442
443
444Thanks
445------
446Special thanks to:
447
448 Emil Stephan for the name HiSax which is a mix of HSCX and ISAC.
449
450 Fritz Elfert, Jan den Ouden, Michael Hipp, Michael Wein,
451 Andreas Kool, Pekka Sarnila, Sim Yskes, Johan Myrre'en,
452 Klaus-Peter Nischke (ITK AG), Christof Petig, Werner Fehn (ELSA GmbH),
453 Volker Schmidt
454 Edgar Toernig and Marcus Niemann for the Sedlbauer driver
455 Stephan von Krawczynski
456 Juergen Quade for the Leased Line part
457 Klaus Lichtenwalder (Klaus.Lichtenwalder@WebForum.DE), for ELSA PCMCIA support
458 Enrik Berkhan (enrik@starfleet.inka.de) for S0BOX specific stuff
459 Ton van Rosmalen for Teles PCI
460 Petr Novak <petr.novak@i.cz> for Winbond W6692 support
461 Werner Cornelius <werner@isdn4linux.de> for HFC-PCI, HFC-S(+/P) and supplementary services support
462 and more people who are hunting bugs. (If I forgot somebody, please
463 send me a mail).
464
465 Firma ELSA GmbH
466 Firma Eicon.Diehl GmbH
467 Firma Dynalink NL
468 Firma ASUSCOM NETWORK INC. Taiwan
469 Firma S.u.S.E
470 Firma ith Kommunikationstechnik GmbH
471 Firma Traverse Technologie Australia
472 Firma Medusa GmbH (www.medusa.de).
473 Firma Quant-X Austria for sponsoring a DEC Alpha board+CPU
474 Firma Cologne Chip Designs GmbH
475
476 My girl friend and partner in life Ute for her patience with me.
477
478
479Enjoy,
480
481Karsten Keil
482keil@isdn4linux.de
483
484
485Appendix: Teles PCMCIA driver
486-----------------------------
487
488See
489 http://www.stud.uni-wuppertal.de/~ea0141/pcmcia.html
490for instructions.
491
492Appendix: Linux and ISDN-leased lines
493-------------------------------------
494
495Original from Juergen Quade, new version KKe.
496
497Attention NEW VERSION, the old leased line syntax won't work !!!
498
499You can use HiSax to connect your Linux-Box via an ISDN leased line
500to e.g. the Internet:
501
5021. Build a kernel which includes the HiSax driver either as a module
503 or as part of the kernel.
504 cd /usr/src/linux
505 make menuconfig
506 <ISDN subsystem - ISDN support -- HiSax>
507 make clean; make zImage; make modules; make modules_install
5082. Install the new kernel
509 cp /usr/src/linux/arch/i386/boot/zImage /etc/kernel/linux.isdn
510 vi /etc/lilo.conf
511 <add new kernel in the bootable image section>
512 lilo
5133. in case the hisax driver is a "fixed" part of the kernel, configure
514 the driver with lilo:
515 vi /etc/lilo.conf
516 <add HiSax driver parameter in the global section (see below)>
517 lilo
518 Your lilo.conf _might_ look like the following:
519
520 # LILO configuration-file
521 # global section
522 # teles 16.0 on IRQ=5, MEM=0xd8000, PORT=0xd80
523 append="hisax=1,3,5,0xd8000,0xd80,HiSax"
524 # teles 16.3 (non pnp) on IRQ=15, PORT=0xd80
525 # append="hisax=3,3,5,0xd8000,0xd80,HiSax"
526 boot=/dev/sda
527 compact # faster, but won't work on all systems.
528 linear
529 read-only
530 prompt
531 timeout=100
532 vga = normal # force sane state
533 # Linux bootable partition config begins
534 image = /etc/kernel/linux.isdn
535 root = /dev/sda1
536 label = linux.isdn
537 #
538 image = /etc/kernel/linux-2.0.30
539 root = /dev/sda1
540 label = linux.secure
541
542 In the line starting with "append" you have to adapt the parameters
543 according to your card (see above in this file)
544
5453. boot the new linux.isdn kernel
5464. start the ISDN subsystem:
547 a) load - if necessary - the modules (depends, whether you compiled
548 the ISDN driver as module or not)
549 According to the type of card you have to specify the necessary
550 driver parameter (irq, io, mem, type, protocol).
551 For the leased line the protocol is "3". See the table above for
552 the parameters, which you have to specify depending on your card.
553 b) configure i4l
554 /sbin/isdnctrl addif isdn0
555 # EAZ 1 -- B1 channel 2 --B2 channel
556 /sbin/isdnctrl eaz isdn0 1
557 /sbin/isdnctrl secure isdn0 on
558 /sbin/isdnctrl huptimeout isdn0 0
559 /sbin/isdnctrl l2_prot isdn0 hdlc
560 # Attention you must not set an outgoing number !!! This won't work !!!
561 # The incoming number is LEASED0 for the first card, LEASED1 for the
562 # second and so on.
563 /sbin/isdnctrl addphone isdn0 in LEASED0
564 # Here is no need to bind the channel.
565 c) in case the remote partner is a CISCO:
566 /sbin/isdnctrl encap isdn0 cisco-h
567 d) configure the interface
568 /sbin/ifconfig isdn0 ${LOCAL_IP} pointopoint ${REMOTE_IP}
569 e) set the routes
570 /sbin/route add -host ${REMOTE_IP} isdn0
571 /sbin/route add default gw ${REMOTE_IP}
572 f) switch the card into leased mode for each used B-channel
573 /sbin/hisaxctrl HiSax 5 1
574
575Remarks:
576a) Use state of the art isdn4k-utils
577
578Here an example script:
579#!/bin/sh
580# Start/Stop ISDN leased line connection
581
582I4L_AS_MODULE=yes
583I4L_REMOTE_IS_CISCO=no
584I4L_MODULE_PARAMS="type=16 io=0x268 irq=7 "
585I4L_DEBUG=no
586I4L_LEASED_128K=yes
587LOCAL_IP=192.168.1.1
588REMOTE_IP=192.168.2.1
589
590case "$1" in
591 start)
592 echo "Starting ISDN ..."
593 if [ ${I4L_AS_MODULE} = "yes" ]; then
594 echo "loading modules..."
595 /sbin/modprobe hisax ${I4L_MODULE_PARAMS}
596 fi
597 # configure interface
598 /sbin/isdnctrl addif isdn0
599 /sbin/isdnctrl secure isdn0 on
600 if [ ${I4L_DEBUG} = "yes" ]; then
601 /sbin/isdnctrl verbose 7
602 /sbin/hisaxctrl HiSax 1 0xffff
603 /sbin/hisaxctrl HiSax 11 0xff
604 cat /dev/isdnctrl >/tmp/lea.log &
605 fi
606 if [ ${I4L_REMOTE_IS_CISCO} = "yes" ]; then
607 /sbin/isdnctrl encap isdn0 cisco-h
608 fi
609 /sbin/isdnctrl huptimeout isdn0 0
610 # B-CHANNEL 1
611 /sbin/isdnctrl eaz isdn0 1
612 /sbin/isdnctrl l2_prot isdn0 hdlc
613 # 1. card
614 /sbin/isdnctrl addphone isdn0 in LEASED0
615 if [ ${I4L_LEASED_128K} = "yes" ]; then
616 /sbin/isdnctrl addslave isdn0 isdn0s
617 /sbin/isdnctrl secure isdn0s on
618 /sbin/isdnctrl huptimeout isdn0s 0
619 # B-CHANNEL 2
620 /sbin/isdnctrl eaz isdn0s 2
621 /sbin/isdnctrl l2_prot isdn0s hdlc
622 # 1. card
623 /sbin/isdnctrl addphone isdn0s in LEASED0
624 if [ ${I4L_REMOTE_IS_CISCO} = "yes" ]; then
625 /sbin/isdnctrl encap isdn0s cisco-h
626 fi
627 fi
628 /sbin/isdnctrl dialmode isdn0 manual
629 # configure tcp/ip
630 /sbin/ifconfig isdn0 ${LOCAL_IP} pointopoint ${REMOTE_IP}
631 /sbin/route add -host ${REMOTE_IP} isdn0
632 /sbin/route add default gw ${REMOTE_IP}
633 # switch to leased mode
634 # B-CHANNEL 1
635 /sbin/hisaxctrl HiSax 5 1
636 if [ ${I4L_LEASED_128K} = "yes" ]; then
637 # B-CHANNEL 2
638 sleep 10; /* Wait for master */
639 /sbin/hisaxctrl HiSax 5 2
640 fi
641 ;;
642 stop)
643 /sbin/ifconfig isdn0 down
644 /sbin/isdnctrl delif isdn0
645 if [ ${I4L_DEBUG} = "yes" ]; then
646 killall cat
647 fi
648 if [ ${I4L_AS_MODULE} = "yes" ]; then
649 /sbin/rmmod hisax
650 /sbin/rmmod isdn
651 /sbin/rmmod ppp
652 /sbin/rmmod slhc
653 fi
654 ;;
655 *)
656 echo "Usage: $0 {start|stop}"
657 exit 1
658esac
659exit 0
diff --git a/Documentation/isdn/README.act2000 b/Documentation/isdn/README.act2000
new file mode 100644
index 000000000000..ce7115e7f4ce
--- /dev/null
+++ b/Documentation/isdn/README.act2000
@@ -0,0 +1,104 @@
1$Id: README.act2000,v 1.3 2000/08/06 09:22:51 armin Exp $
2
3This document describes the ACT2000 driver for the
4IBM Active 2000 ISDN card.
5
6There are 3 Types of this card available. A ISA-, MCA-, and PCMCIA-Bus
7Version. Currently, only the ISA-Bus version of the card is supported.
8However MCA and PCMCIA will follow soon.
9
10The ISA-Bus Version uses 8 IO-ports. The base port address has to be set
11manually using the DIP switches.
12
13Setting up the DIP switches for the IBM Active 2000 ISDN card:
14
15 Note: S5 and S6 always set off!
16
17 S1 S2 S3 S4 Base-port
18 on on on on 0x0200 (Factory default)
19 off on on on 0x0240
20 on off on on 0x0280
21 off off on on 0x02c0
22 on on off on 0x0300
23 off on off on 0x0340
24 on off off on 0x0380
25 on on on off 0xcfe0
26 off on on off 0xcfa0
27 on off on off 0xcf60
28 off off on off 0xcf20
29 on on off off 0xcee0
30 off on off off 0xcea0
31 on off off off 0xce60
32 off off off off Card disabled
33
34IRQ is configured by software. Possible values are:
35
36 3, 5, 7, 10, 11, 12, 15 and none (polled mode)
37
38
39The ACT2000 driver may either be built into the kernel or as a module.
40Initialization depends on how the driver is built:
41
42Driver built into the kernel:
43
44 The ACT2000 driver can be configured using the commandline-feature while
45 loading the kernel with LILO or LOADLIN. It accepts the following syntax:
46
47 act2000=b,p,i[,idstring]
48
49 where
50
51 b = Bus-Type (1=ISA, 2=MCA, 3=PCMCIA)
52 p = portbase (-1 means autoprobe)
53 i = Interrupt (-1 means use next free IRQ, 0 means polled mode)
54
55 The idstring is an arbitrary string used for referencing the card
56 by the actctrl tool later.
57
58 Defaults used, when no parameters given at all:
59
60 1,-1,-1,""
61
62 which means: Autoprobe for an ISA card, use next free IRQ, let the
63 ISDN linklevel fill the IdString (usually "line0" for the first card).
64
65 If you like to use more than one card, you can use the program
66 "actctrl" from the utility-package to configure additional cards.
67
68 Using the "actctrl"-utility, portbase and irq can also be changed
69 during runtime. The D-channel protocol is configured by the "dproto"
70 option of the "actctrl"-utility after loading the firmware into the
71 card's memory using the "actctrl"-utility.
72
73Driver built as module:
74
75 The module act2000.o can be configured during modprobe (insmod) by
76 appending its parameters to the modprobe resp. insmod commandline.
77 The following syntax is accepted:
78
79 act_bus=b act_port=p act_irq=i act_id=idstring
80
81 where b, p, i and idstring have the same meanings as the parameters
82 described for the builtin version above.
83
84 Using the "actctrl"-utility, the same features apply to the modularized
85 version as to the kernel-builtin one. (i.e. loading of firmware and
86 configuring the D-channel protocol)
87
88Loading the firmware into the card:
89
90 The firmware is supplied together with the isdn4k-utils package. It
91 can be found in the subdirectory act2000/firmware/
92
93 Assuming you have installed the utility-package correctly, the firmware
94 will be downloaded into the card using the following command:
95
96 actctrl -d idstring load /etc/isdn/bip11.btl
97
98 where idstring is the Name of the card, given during insmod-time or
99 (for kernel-builtin driver) on the kernel commandline. If only one
100 ISDN card is used, the -d isdstrin may be omitted.
101
102 For further documentation (adding more IBM Active 2000 cards), refer to
103 the manpage actctrl.8 which is included in the isdn4k-utils package.
104
diff --git a/Documentation/isdn/README.audio b/Documentation/isdn/README.audio
new file mode 100644
index 000000000000..8ebca19290d9
--- /dev/null
+++ b/Documentation/isdn/README.audio
@@ -0,0 +1,138 @@
1$Id: README.audio,v 1.8 1999/07/11 17:17:29 armin Exp $
2
3ISDN subsystem for Linux.
4 Description of audio mode.
5
6When enabled during kernel configuration, the tty emulator of the ISDN
7subsystem is capable of a reduced set of commands to support audio.
8This document describes the commands supported and the format of
9audio data.
10
11Commands for enabling/disabling audio mode:
12
13 AT+FCLASS=8 Enable audio mode.
14 This affects the following registers:
15 S18: Bits 0 and 2 are set.
16 S16: Set to 48 and any further change to
17 larger values is blocked.
18 AT+FCLASS=0 Disable audio mode.
19 Register 18 is set to 4.
20 AT+FCLASS=? Show possible modes.
21 AT+FCLASS? Report current mode (0 or 8).
22
23Commands supported in audio mode:
24
25All audio mode commands have one of the following forms:
26
27 AT+Vxx? Show current setting.
28 AT+Vxx=? Show possible settings.
29 AT+Vxx=v Set simple parameter.
30 AT+Vxx=v,v ... Set complex parameter.
31
32where xx is a two-character code and v are alphanumerical parameters.
33The following commands are supported:
34
35 AT+VNH=x Auto hangup setting. NO EFFECT, supported
36 for compatibility only.
37 AT+VNH? Always reporting "1"
38 AT+VNH=? Always reporting "1"
39
40 AT+VIP Reset all audio parameters.
41
42 AT+VLS=x Line select. x is one of the following:
43 0 = No device.
44 2 = Phone line.
45 AT+VLS=? Always reporting "0,2"
46 AT+VLS? Show current line.
47
48 AT+VRX Start recording. Emulator responds with
49 CONNECT and starts sending audio data to
50 the application. See below for data format
51
52 AT+VSD=x,y Set silence-detection parameters.
53 Possible parameters:
54 x = 0 ... 31 sensitivity threshold level.
55 (default 0 , deactivated)
56 y = 0 ... 255 range of interval in units
57 of 0.1 second. (default 70)
58 AT+VSD=? Report possible parameters.
59 AT+VSD? Show current parameters.
60
61 AT+VDD=x,y Set DTMF-detection parameters.
62 Only possible if online and during this connection.
63 Possible parameters:
64 x = 0 ... 15 sensitivity threshold level.
65 (default 0 , I4L soft-decode)
66 (1-15 soft-decode off, hardware on)
67 y = 0 ... 255 tone duration in units of 5ms.
68 Not for I4L soft decode (default 8, 40ms)
69 AT+VDD=? Report possible parameters.
70 AT+VDD? Show current parameters.
71
72 AT+VSM=x Select audio data format.
73 Possible parameters:
74 2 = ADPCM-2
75 3 = ADPCM-3
76 4 = ADPCM-4
77 5 = aLAW
78 6 = uLAW
79 AT+VSM=? Show possible audio formats.
80
81 AT+VTX Start audio playback. Emulator responds
82 with CONNECT and starts sending audio data
83 received from the application via phone line.
84General behavior and description of data formats/protocol.
85 when a connection is made:
86
87 On incoming calls, if the application responds to a RING
88 with ATA, depending on the calling service, the emulator
89 responds with either CONNECT (data call) or VCON (voice call).
90
91 On outgoing voice calls, the emulator responds with VCON
92 upon connection setup.
93
94 Audio recording.
95
96 When receiving audio data, a kind of bisync protocol is used.
97 Upon AT+VRX command, the emulator responds with CONNECT, and
98 starts sending audio data to the application. There are several
99 escape sequences defined, all using DLE (0x10) as Escape char:
100
101 <DLE><ETX> End of audio data. (i.e. caused by a
102 hangup of the remote side) Emulator stops
103 recording, responding with VCON.
104 <DLE><DC4> Abort recording, (send by appl.) Emulator
105 stops recording, sends DLE,ETX.
106 <DLE><DLE> Escape sequence for DLE in data stream.
107 <DLE>0 Touchtone "0" received.
108 ...
109 <DLE>9 Touchtone "9" received.
110 <DLE># Touchtone "#" received.
111 <DLE>* Touchtone "*" received.
112 <DLE>A Touchtone "A" received.
113 <DLE>B Touchtone "B" received.
114 <DLE>C Touchtone "C" received.
115 <DLE>D Touchtone "D" received.
116
117 <DLE>q quiet. Silence detected after non-silence.
118 <DLE>s silence. Silence detected from the
119 start of recording.
120
121 Currently unsupported DLE sequences:
122
123 <DLE>c FAX calling tone received.
124 <DLE>b busy tone received.
125
126 Audio playback.
127
128 When sending audio data, upon AT+VTX command, emulator responds with
129 CONNECT, and starts transferring data from application to the phone line.
130 The same DLE sequences apply to this mode.
131
132 Full-Duplex-Audio:
133
134 When _both_ commands for recording and playback are given in _one_
135 AT-command-line (i.e.: "AT+VTX+VRX"), full-duplex-mode is selected.
136 In this mode, the only way to stop recording is sending <DLE><DC4>
137 and the only way to stop playback is to send <DLE><ETX>.
138
diff --git a/Documentation/isdn/README.avmb1 b/Documentation/isdn/README.avmb1
new file mode 100644
index 000000000000..9e075484ef1e
--- /dev/null
+++ b/Documentation/isdn/README.avmb1
@@ -0,0 +1,187 @@
1Driver for active AVM Controller.
2
3The driver provides a kernel capi2.0 Interface (kernelcapi) and
4on top of this a User-Level-CAPI2.0-interface (capi)
5and a driver to connect isdn4linux with CAPI2.0 (capidrv).
6The lowlevel interface can be used to implement a CAPI2.0
7also for passive cards since July 1999.
8
9The author can be reached at calle@calle.in-berlin.de.
10The command avmcapictrl is part of the isdn4k-utils.
11t4-files can be found at ftp://ftp.avm.de/cardware/b1/linux/firmware
12
13Currently supported cards:
14 B1 ISA (all versions)
15 B1 PCI
16 T1/T1B (HEMA card)
17 M1
18 M2
19 B1 PCMCIA
20
21Installing
22----------
23
24You need at least /dev/capi20 to load the firmware.
25
26mknod /dev/capi20 c 68 0
27mknod /dev/capi20.00 c 68 1
28mknod /dev/capi20.01 c 68 2
29.
30.
31.
32mknod /dev/capi20.19 c 68 20
33
34Running
35-------
36
37To use the card you need the t4-files to download the firmware.
38AVM GmbH provides several t4-files for the different D-channel
39protocols (b1.t4 for Euro-ISDN). Install these file in /lib/isdn.
40
41if you configure as modules load the modules this way:
42
43insmod /lib/modules/current/misc/capiutil.o
44insmod /lib/modules/current/misc/b1.o
45insmod /lib/modules/current/misc/kernelcapi.o
46insmod /lib/modules/current/misc/capidrv.o
47insmod /lib/modules/current/misc/capi.o
48
49if you have an B1-PCI card load the module b1pci.o
50insmod /lib/modules/current/misc/b1pci.o
51and load the firmware with
52avmcapictrl load /lib/isdn/b1.t4 1
53
54if you have an B1-ISA card load the module b1isa.o
55and add the card by calling
56avmcapictrl add 0x150 15
57and load the firmware by calling
58avmcapictrl load /lib/isdn/b1.t4 1
59
60if you have an T1-ISA card load the module t1isa.o
61and add the card by calling
62avmcapictrl add 0x450 15 T1 0
63and load the firmware by calling
64avmcapictrl load /lib/isdn/t1.t4 1
65
66if you have an PCMCIA card (B1/M1/M2) load the module b1pcmcia.o
67before you insert the card.
68
69Leased Lines with B1
70--------------------
71Init card and load firmware.
72For an D64S use "FV: 1" as phone number
73For an D64S2 use "FV: 1" and "FV: 2" for multilink
74or "FV: 1,2" to use CAPI channel bundling.
75
76/proc-Interface
77-----------------
78
79/proc/capi:
80 dr-xr-xr-x 2 root root 0 Jul 1 14:03 .
81 dr-xr-xr-x 82 root root 0 Jun 30 19:08 ..
82 -r--r--r-- 1 root root 0 Jul 1 14:03 applications
83 -r--r--r-- 1 root root 0 Jul 1 14:03 applstats
84 -r--r--r-- 1 root root 0 Jul 1 14:03 capi20
85 -r--r--r-- 1 root root 0 Jul 1 14:03 capidrv
86 -r--r--r-- 1 root root 0 Jul 1 14:03 controller
87 -r--r--r-- 1 root root 0 Jul 1 14:03 contrstats
88 -r--r--r-- 1 root root 0 Jul 1 14:03 driver
89 -r--r--r-- 1 root root 0 Jul 1 14:03 ncci
90 -r--r--r-- 1 root root 0 Jul 1 14:03 users
91
92/proc/capi/applications:
93 applid level3cnt datablkcnt datablklen ncci-cnt recvqueuelen
94 level3cnt: capi_register parameter
95 datablkcnt: capi_register parameter
96 ncci-cnt: current number of nccis (connections)
97 recvqueuelen: number of messages on receive queue
98 for example:
991 -2 16 2048 1 0
1002 2 7 2048 1 0
101
102/proc/capi/applstats:
103 applid recvctlmsg nrecvdatamsg nsentctlmsg nsentdatamsg
104 recvctlmsg: capi messages received without DATA_B3_IND
105 recvdatamsg: capi DATA_B3_IND received
106 sentctlmsg: capi messages sent without DATA_B3_REQ
107 sentdatamsg: capi DATA_B3_REQ sent
108 for example:
1091 2057 1699 1721 1699
110
111/proc/capi/capi20: statistics of capi.o (/dev/capi20)
112 minor nopen nrecvdropmsg nrecvctlmsg nrecvdatamsg sentctlmsg sentdatamsg
113 minor: minor device number of capi device
114 nopen: number of calls to devices open
115 nrecvdropmsg: capi messages dropped (messages in recvqueue in close)
116 nrecvctlmsg: capi messages received without DATA_B3_IND
117 nrecvdatamsg: capi DATA_B3_IND received
118 nsentctlmsg: capi messages sent without DATA_B3_REQ
119 nsentdatamsg: capi DATA_B3_REQ sent
120
121 for example:
1221 2 18 0 16 2
123
124/proc/capi/capidrv: statistics of capidrv.o (capi messages)
125 nrecvctlmsg nrecvdatamsg sentctlmsg sentdatamsg
126 nrecvctlmsg: capi messages received without DATA_B3_IND
127 nrecvdatamsg: capi DATA_B3_IND received
128 nsentctlmsg: capi messages sent without DATA_B3_REQ
129 nsentdatamsg: capi DATA_B3_REQ sent
130 for example:
1312780 2226 2256 2226
132
133/proc/capi/controller:
134 controller drivername state cardname controllerinfo
135 for example:
1361 b1pci running b1pci-e000 B1 3.07-01 0xe000 19
1372 t1isa running t1isa-450 B1 3.07-01 0x450 11 0
1383 b1pcmcia running m2-150 B1 3.07-01 0x150 5
139
140/proc/capi/contrstats:
141 controller nrecvctlmsg nrecvdatamsg sentctlmsg sentdatamsg
142 nrecvctlmsg: capi messages received without DATA_B3_IND
143 nrecvdatamsg: capi DATA_B3_IND received
144 nsentctlmsg: capi messages sent without DATA_B3_REQ
145 nsentdatamsg: capi DATA_B3_REQ sent
146 for example:
1471 2845 2272 2310 2274
1482 2 0 2 0
1493 2 0 2 0
150
151/proc/capi/driver:
152 drivername ncontroller
153 for example:
154b1pci 1
155t1isa 1
156b1pcmcia 1
157b1isa 0
158
159/proc/capi/ncci:
160 apllid ncci winsize sendwindow
161 for example:
1621 0x10101 8 0
163
164/proc/capi/users: kernelmodules that use the kernelcapi.
165 name
166 for example:
167capidrv
168capi20
169
170Questions
171---------
172Check out the FAQ (ftp.isdn4linux.de) or subscribe to the
173linux-avmb1@calle.in-berlin.de mailing list by sending
174a mail to majordomo@calle.in-berlin.de with
175subscribe linux-avmb1
176in the body.
177
178German documentation and several scripts can be found at
179ftp://ftp.avm.de/cardware/b1/linux/
180
181Bugs
182----
183If you find any please let me know.
184
185Enjoy,
186
187Carsten Paeth (calle@calle.in-berlin.de)
diff --git a/Documentation/isdn/README.concap b/Documentation/isdn/README.concap
new file mode 100644
index 000000000000..2f114babe4b6
--- /dev/null
+++ b/Documentation/isdn/README.concap
@@ -0,0 +1,259 @@
1Description of the "concap" encapsulation protocol interface
2============================================================
3
4The "concap" interface is intended to be used by network device
5drivers that need to process an encapsulation protocol.
6It is assumed that the protocol interacts with a linux network device by
7- data transmission
8- connection control (establish, release)
9Thus, the mnemonic: "CONnection CONtrolling eNCAPsulation Protocol".
10
11This is currently only used inside the isdn subsystem. But it might
12also be useful to other kinds of network devices. Thus, if you want
13to suggest changes that improve usability or performance of the
14interface, please let me know. I'm willing to include them in future
15releases (even if I needed to adapt the current isdn code to the
16changed interface).
17
18
19Why is this useful?
20===================
21
22The encapsulation protocol used on top of WAN connections or permanent
23point-to-point links are frequently chosen upon bilateral agreement.
24Thus, a device driver for a certain type of hardware must support
25several different encapsulation protocols at once.
26
27The isdn device driver did already support several different
28encapsulation protocols. The encapsulation protocol is configured by a
29user space utility (isdnctrl). The isdn network interface code then
30uses several case statements which select appropriate actions
31depending on the currently configured encapsulation protocol.
32
33In contrast, LAN network interfaces always used a single encapsulation
34protocol which is unique to the hardware type of the interface. The LAN
35encapsulation is usually done by just sticking a header on the data. Thus,
36traditional linux network device drivers used to process the
37encapsulation protocol directly (usually by just providing a hard_header()
38method in the device structure) using some hardware type specific support
39functions. This is simple, direct and efficient. But it doesn't fit all
40the requirements for complex WAN encapsulations.
41
42
43 The configurability of the encapsulation protocol to be used
44 makes isdn network interfaces more flexible, but also much more
45 complex than traditional lan network interfaces.
46
47
48Many Encapsulation protocols used on top of WAN connections will not just
49stick a header on the data. They also might need to set up or release
50the WAN connection. They also might want to send other data for their
51private purpose over the wire, e.g. ppp does a lot of link level
52negotiation before the first piece of user data can be transmitted.
53Such encapsulation protocols for WAN devices are typically more complex
54than encapsulation protocols for lan devices. Thus, network interface
55code for typical WAN devices also tends to be more complex.
56
57
58In order to support Linux' x25 PLP implementation on top of
59isdn network interfaces I could have introduced yet another branch to
60the various case statements inside drivers/isdn/isdn_net.c.
61This eventually made isdn_net.c even more complex. In addition, it made
62isdn_net.c harder to maintain. Thus, by identifying an abstract
63interface between the network interface code and the encapsulation
64protocol, complexity could be reduced and maintainability could be
65increased.
66
67
68Likewise, a similar encapsulation protocol will frequently be needed by
69several different interfaces of even different hardware type, e.g. the
70synchronous ppp implementation used by the isdn driver and the
71asynchronous ppp implementation used by the ppp driver have a lot of
72similar code in them. By cleanly separating the encapsulation protocol
73from the hardware specific interface stuff such code could be shared
74better in future.
75
76
77When operating over dial-up-connections (e.g. telephone lines via modem,
78non-permanent virtual circuits of wide area networks, ISDN) many
79encapsulation protocols will need to control the connection. Therefore,
80some basic connection control primitives are supported. The type and
81semantics of the connection (i.e the ISO layer where connection service
82is provided) is outside our scope and might be different depending on
83the encapsulation protocol used, e.g. for a ppp module using our service
84on top of a modem connection a connect_request will result in dialing
85a (somewhere else configured) remote phone number. For an X25-interface
86module (LAPB semantics, as defined in Documentation/networking/x25-iface.txt)
87a connect_request will ask for establishing a reliable lapb
88datalink connection.
89
90
91The encapsulation protocol currently provides the following
92service primitives to the network device.
93
94- create a new encapsulation protocol instance
95- delete encapsulation protocol instance and free all its resources
96- initialize (open) the encapsulation protocol instance for use.
97- deactivate (close) an encapsulation protocol instance.
98- process (xmit) data handed down by upper protocol layer
99- receive data from lower (hardware) layer
100- process connect indication from lower (hardware) layer
101- process disconnect indication from lower (hardware) layer
102
103
104The network interface driver accesses those primitives via callbacks
105provided by the encapsulation protocol instance within a
106struct concap_proto_ops.
107
108struct concap_proto_ops{
109
110 /* create a new encapsulation protocol instance of same type */
111 struct concap_proto * (*proto_new) (void);
112
113 /* delete encapsulation protocol instance and free all its resources.
114 cprot may no loger be referenced after calling this */
115 void (*proto_del)(struct concap_proto *cprot);
116
117 /* initialize the protocol's data. To be called at interface startup
118 or when the device driver resets the interface. All services of the
119 encapsulation protocol may be used after this*/
120 int (*restart)(struct concap_proto *cprot,
121 struct net_device *ndev,
122 struct concap_device_ops *dops);
123
124 /* deactivate an encapsulation protocol instance. The encapsulation
125 protocol may not call any *dops methods after this. */
126 int (*close)(struct concap_proto *cprot);
127
128 /* process a frame handed down to us by upper layer */
129 int (*encap_and_xmit)(struct concap_proto *cprot, struct sk_buff *skb);
130
131 /* to be called for each data entity received from lower layer*/
132 int (*data_ind)(struct concap_proto *cprot, struct sk_buff *skb);
133
134 /* to be called when a connection was set up/down.
135 Protocols that don't process these primitives might fill in
136 dummy methods here */
137 int (*connect_ind)(struct concap_proto *cprot);
138 int (*disconn_ind)(struct concap_proto *cprot);
139};
140
141
142The data structures are defined in the header file include/linux/concap.h.
143
144
145A Network interface using encapsulation protocols must also provide
146some service primitives to the encapsulation protocol:
147
148- request data being submitted by lower layer (device hardware)
149- request a connection being set up by lower layer
150- request a connection being released by lower layer
151
152The encapsulation protocol accesses those primitives via callbacks
153provided by the network interface within a struct concap_device_ops.
154
155struct concap_device_ops{
156
157 /* to request data be submitted by device */
158 int (*data_req)(struct concap_proto *, struct sk_buff *);
159
160 /* Control methods must be set to NULL by devices which do not
161 support connection control. */
162 /* to request a connection be set up */
163 int (*connect_req)(struct concap_proto *);
164
165 /* to request a connection be released */
166 int (*disconn_req)(struct concap_proto *);
167};
168
169The network interface does not explicitly provide a receive service
170because the encapsulation protocol directly calls netif_rx().
171
172
173
174
175An encapsulation protocol itself is actually the
176struct concap_proto{
177 struct net_device *net_dev; /* net device using our service */
178 struct concap_device_ops *dops; /* callbacks provided by device */
179 struct concap_proto_ops *pops; /* callbacks provided by us */
180 int flags;
181 void *proto_data; /* protocol specific private data, to
182 be accessed via *pops methods only*/
183 /*
184 :
185 whatever
186 :
187 */
188};
189
190Most of this is filled in when the device requests the protocol to
191be reset (opend). The network interface must provide the net_dev and
192dops pointers. Other concap_proto members should be considered private
193data that are only accessed by the pops callback functions. Likewise,
194a concap proto should access the network device's private data
195only by means of the callbacks referred to by the dops pointer.
196
197
198A possible extended device structure which uses the connection controlling
199encapsulation services could look like this:
200
201struct concap_device{
202 struct net_device net_dev;
203 struct my_priv /* device->local stuff */
204 /* the my_priv struct might contain a
205 struct concap_device_ops *dops;
206 to provide the device specific callbacks
207 */
208 struct concap_proto *cprot; /* callbacks provided by protocol */
209};
210
211
212
213Misc Thoughts
214=============
215
216The concept of the concap proto might help to reuse protocol code and
217reduce the complexity of certain network interface implementations.
218The trade off is that it introduces yet another procedure call layer
219when processing the protocol. This has of course some impact on
220performance. However, typically the concap interface will be used by
221devices attached to slow lines (like telephone, isdn, leased synchronous
222lines). For such slow lines, the overhead is probably negligible.
223This might no longer hold for certain high speed WAN links (like
224ATM).
225
226
227If general linux network interfaces explicitly supported concap
228protocols (e.g. by a member struct concap_proto* in struct net_device)
229then the interface of the service function could be changed
230by passing a pointer of type (struct net_device*) instead of
231type (struct concap_proto*). Doing so would make many of the service
232functions compatible to network device support functions.
233
234e.g. instead of the concap protocol's service function
235
236 int (*encap_and_xmit)(struct concap_proto *cprot, struct sk_buff *skb);
237
238we could have
239
240 int (*encap_and_xmit)(struct net_device *ndev, struct sk_buff *skb);
241
242As this is compatible to the dev->hard_start_xmit() method, the device
243driver could directly register the concap protocol's encap_and_xmit()
244function as its hard_start_xmit() method. This would eliminate one
245procedure call layer.
246
247
248The device's data request function could also be defined as
249
250 int (*data_req)(struct net_device *ndev, struct sk_buff *skb);
251
252This might even allow for some protocol stacking. And the network
253interface might even register the same data_req() function directly
254as its hard_start_xmit() method when a zero layer encapsulation
255protocol is configured. Thus, eliminating the performance penalty
256of the concap interface when a trivial concap protocol is used.
257Nevertheless, the device remains able to support encapsulation
258protocol configuration.
259
diff --git a/Documentation/isdn/README.diversion b/Documentation/isdn/README.diversion
new file mode 100644
index 000000000000..bddcd5fb86ff
--- /dev/null
+++ b/Documentation/isdn/README.diversion
@@ -0,0 +1,127 @@
1The isdn diversion services are a supporting module working together with
2the isdn4linux and the HiSax module for passive cards.
3Active cards, TAs and cards using a own or other driver than the HiSax
4module need to be adapted to the HL<->LL interface described in a separate
5document. The diversion services may be used with all cards supported by
6the HiSax driver.
7The diversion kernel interface and controlling tool divertctrl were written
8by Werner Cornelius (werner@isdn4linux.de or werner@titro.de) under the
9GNU General Public License.
10
11 This program is free software; you can redistribute it and/or modify
12 it under the terms of the GNU General Public License as published by
13 the Free Software Foundation; either version 2 of the License, or
14 (at your option) any later version.
15
16 This program is distributed in the hope that it will be useful,
17 but WITHOUT ANY WARRANTY; without even the implied warranty of
18 MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
19 GNU General Public License for more details.
20
21 You should have received a copy of the GNU General Public License
22 along with this program; if not, write to the Free Software
23 Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
24
25Table of contents
26=================
27
281. Features of the i4l diversion services
29 (Or what can the i4l diversion services do for me)
30
312. Required hard- and software
32
333. Compiling, installing and loading/unloading the module
34 Tracing calling and diversion information
35
364. Tracing calling and diversion information
37
385. Format of the divert device ASCII output
39
40
411. Features of the i4l diversion services
42 (Or what can the i4l diversion services do for me)
43
44 The i4l diversion services offers call forwarding and logging normally
45 only supported by isdn phones. Incoming calls may be diverted
46 unconditionally (CFU), when not reachable (CFNR) or on busy condition
47 (CFB).
48 The diversions may be invoked statically in the providers exchange
49 as normally done by isdn phones. In this case all incoming calls
50 with a special (or all) service identifiers are forwarded if the
51 forwarding reason is met. Activated static services may also be
52 interrogated (queried).
53 The i4l diversion services additionally offers a dynamic version of
54 call forwarding which is not preprogrammed inside the providers exchange
55 but dynamically activated by i4l.
56 In this case all incoming calls are checked by rules that may be
57 compared to the mechanism of ipfwadm or ipchains. If a given rule matches
58 the checking process is finished and the rule matching will be applied
59 to the call.
60 The rules include primary and secondary service identifiers, called
61 number and subaddress, callers number and subaddress and whether the rule
62 matches to all filtered calls or only those when all B-channel resources
63 are exhausted.
64 Actions that may be invoked by a rule are ignore, proceed, reject,
65 direct divert or delayed divert of a call.
66 All incoming calls matching a rule except the ignore rule a reported and
67 logged as ASCII via the proc filesystem (/proc/net/isdn/divert). If proceed
68 is selected the call will be held in a proceeding state (without ringing)
69 for a certain amount of time to let an external program or client decide
70 how to handle the call.
71
72
732. Required hard- and software
74
75 For using the i4l diversion services the isdn line must be of a EURO/DSS1
76 type. Additionally the i4l services only work together with the HiSax
77 driver for passive isdn cards. All HiSax supported cards may be used for
78 the diversion purposes.
79 The static diversion services require the provider having static services
80 CFU, CFNR, CFB activated on an MSN-line. The static services may not be
81 used on a point-to-point connection. Further the static services are only
82 available in some countries (for example germany). Countries requiring the
83 keypad protocol for activating static diversions (like the netherlands) are
84 not supported but may use the tty devices for this purpose.
85 The dynamic diversion services may be used in all countries if the provider
86 enables the feature CF (call forwarding). This should work on both MSN- and
87 point-to-point lines.
88 To add and delete rules the additional divertctrl program is needed. This
89 program is part of the isdn4kutils package.
90
913. Compiling, installing and loading/unloading the module
92 Tracing calling and diversion information
93
94
95 To compile the i4l code with diversion support you need to say yes to the
96 DSS1 diversion services when selecting the i4l options in the kernel
97 config (menuconfig or config).
98 After having properly activated a make modules and make modules_install all
99 required modules will be correctly installed in the needed modules dirs.
100 As the diversion services are currently not included in the scripts of most
101 standard distributions you will have to add a "insmod dss1_divert" after
102 having loaded the global isdn module.
103 The module can be loaded without any command line parameters.
104 If the module is actually loaded and active may be checked with a
105 "cat /proc/modules" or "ls /proc/net/isdn/divert". The divert file is
106 dynamically created by the diversion module and removed when the module is
107 unloaded.
108
109
1104. Tracing calling and diversion information
111
112 You also may put a "cat /proc/net/isdn/divert" in the background with the
113 output redirected to a file. Then all actions of the module are logged.
114 The divert file in the proc system may be opened more than once, so in
115 conjunction with inetd and a small remote client on other machines inside
116 your network incoming calls and reactions by the module may be shown on
117 every listening machine.
118 If a call is reported as proceeding an external program or client may
119 specify during a certain amount of time (normally 4 to 10 seconds) what
120 to do with that call.
121 To unload the module all open files to the device in the proc system must
122 be closed. Otherwise the module (and isdn.o) may not be unloaded.
123
1245. Format of the divert device ASCII output
125
126 To be done later
127
diff --git a/Documentation/isdn/README.fax b/Documentation/isdn/README.fax
new file mode 100644
index 000000000000..5314958a8a6e
--- /dev/null
+++ b/Documentation/isdn/README.fax
@@ -0,0 +1,45 @@
1
2Fax with isdn4linux
3===================
4
5When enabled during kernel configuration, the tty emulator
6of the ISDN subsystem is capable of the Fax Class 2 commands.
7
8This only makes sense under the following conditions :
9
10- You need the commands as dummy, because you are using
11 hylafax (with patch) for AVM capi.
12- You want to use the fax capabilities of your isdn-card.
13 (supported cards are listed below)
14
15
16NOTE: This implementation does *not* support fax with passive
17 ISDN-cards (known as softfax). The low-level driver of
18 the ISDN-card and/or the card itself must support this.
19
20
21Supported ISDN-Cards
22--------------------
23
24Eicon DIVA Server BRI/PCI
25 - full support with both B-channels.
26
27Eicon DIVA Server 4BRI/PCI
28 - full support with all B-channels.
29
30Eicon DIVA Server PRI/PCI
31 - full support on amount of B-channels
32 depending on DSPs on board.
33
34
35
36The command set is known as Class 2 (not Class 2.0) and
37can be activated by AT+FCLASS=2
38
39
40The interface between the link-level-module and the hardware-level driver
41is described in the files INTERFACE.fax and INTERFACE.
42
43Armin
44mac@melware.de
45
diff --git a/Documentation/isdn/README.hfc-pci b/Documentation/isdn/README.hfc-pci
new file mode 100644
index 000000000000..e8a4ef0226e8
--- /dev/null
+++ b/Documentation/isdn/README.hfc-pci
@@ -0,0 +1,41 @@
1The driver for the HFC-PCI and HFC-PCI-A chips from CCD may be used
2for many OEM cards using this chips.
3Additionally the driver has a special feature which makes it possible
4to read the echo-channel of the isdn bus. So all frames in both directions
5may be logged.
6When the echo logging feature is used the number of available B-channels
7for a HFC-PCI card is reduced to 1. Of course this is only relevant to
8the card, not to the isdn line.
9To activate the echo mode the following ioctls must be entered:
10
11hisaxctrl <driver/cardname> 10 1
12
13This reduces the available channels to 1. There must not be open connections
14through this card when entering the command.
15And then:
16
17hisaxctrl <driver/cardname> 12 1
18
19This enables the echo mode. If Hex logging is activated the isdnctrlx
20devices show a output with a line beginning of HEX: for the providers
21exchange and ECHO: for isdn devices sending to the provider.
22
23If more than one HFC-PCI cards are installed, a specific card may be selected
24at the hisax module load command line. Supply the load command with the desired
25IO-address of the desired card.
26Example:
27There tree cards installed in your machine at IO-base addresses 0xd000, 0xd400
28and 0xdc00
29If you want to use the card at 0xd400 standalone you should supply the insmod
30or depmod with type=35 io=0xd400.
31If you want to use all three cards, but the order needs to be at 0xdc00,0xd400,
320xd000 you may give the parameters type=35,35,35 io=0xdc00,0xd400,0xd00
33Then the desired card will be the initialised in the desired order.
34If the io parameter is used the io addresses of all used cards should be
35supplied else the parameter is assumed 0 and a auto search for a free card is
36invoked which may not give the wanted result.
37
38Comments and reports to werner@isdn4linux.de or werner@isdn-development.de
39
40
41
diff --git a/Documentation/isdn/README.hysdn b/Documentation/isdn/README.hysdn
new file mode 100644
index 000000000000..56cc59df1fb7
--- /dev/null
+++ b/Documentation/isdn/README.hysdn
@@ -0,0 +1,195 @@
1$Id: README.hysdn,v 1.3.6.1 2001/02/10 14:41:19 kai Exp $
2The hysdn driver has been written by
3by Werner Cornelius (werner@isdn4linux.de or werner@titro.de)
4for Hypercope GmbH Aachen Germany. Hypercope agreed to publish this driver
5under the GNU General Public License.
6
7The CAPI 2.0-support was added by Ulrich Albrecht (ualbrecht@hypercope.de)
8for Hypercope GmbH Aachen, Germany.
9
10
11 This program is free software; you can redistribute it and/or modify
12 it under the terms of the GNU General Public License as published by
13 the Free Software Foundation; either version 2 of the License, or
14 (at your option) any later version.
15
16 This program is distributed in the hope that it will be useful,
17 but WITHOUT ANY WARRANTY; without even the implied warranty of
18 MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
19 GNU General Public License for more details.
20
21 You should have received a copy of the GNU General Public License
22 along with this program; if not, write to the Free Software
23 Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
24
25Table of contents
26=================
27
281. About the driver
29
302. Loading/Unloading the driver
31
323. Entries in the /proc filesystem
33
344. The /proc/net/hysdn/cardconfX file
35
365. The /proc/net/hysdn/cardlogX file
37
386. Where to get additional info and help
39
40
411. About the driver
42
43 The drivers/isdn/hysdn subdir contains a driver for HYPERCOPEs active
44 PCI isdn cards Champ, Ergo and Metro. To enable support for this cards
45 enable ISDN support in the kernel config and support for HYSDN cards in
46 the active cards submenu. The driver may only be compiled and used if
47 support for loadable modules and the process filesystem have been enabled.
48
49 These cards provide two different interfaces to the kernel. Without the
50 optional CAPI 2.0 support, they register as ethernet card. IP-routing
51 to a ISDN-destination is performed on the card itself. All necessary
52 handlers for various protocols like ppp and others as well as config info
53 and firmware may be fetched from Hypercopes WWW-Site www.hypercope.de.
54
55 With CAPI 2.0 support enabled, the card can also be used as a CAPI 2.0
56 compliant devices with either CAPI 2.0 applications
57 (check isdn4k-utils) or -using the capidrv module- as a regular
58 isdn4linux device. This is done via the same mechanism as with the
59 active AVM cards and in fact uses the same module.
60
61
622. Loading/Unloading the driver
63
64 The module has no command line parameters and auto detects up to 10 cards
65 in the id-range 0-9.
66 If a loaded driver shall be unloaded all open files in the /proc/net/hysdn
67 subdir need to be closed and all ethernet interfaces allocated by this
68 driver must be shut down. Otherwise the module counter will avoid a module
69 unload.
70
71 If you are using the CAPI 2.0-interface, make sure to load/modprobe the
72 kernelcapi-module first.
73
74 If you plan to use the capidrv-link to isdn4linux, make sure to load
75 capidrv.o after all modules using this driver (i.e. after hysdn and
76 any avm-specific modules).
77
783. Entries in the /proc filesystem
79
80 When the module has been loaded it adds the directory hysdn in the
81 /proc/net tree. This directory contains exactly 2 file entries for each
82 card. One is called cardconfX and the other cardlogX, where X is the
83 card id number from 0 to 9.
84 The cards are numbered in the order found in the PCI config data.
85
864. The /proc/net/hysdn/cardconfX file
87
88 This file may be read to get by everyone to get info about the cards type,
89 actual state, available features and used resources.
90 The first 3 entries (id, bus and slot) are PCI info fields, the following
91 type field gives the information about the cards type:
92
93 4 -> Ergo card (server card with 2 b-chans)
94 5 -> Metro card (server card with 4 or 8 b-chans)
95 6 -> Champ card (client card with 2 b-chans)
96
97 The following 3 fields show the hardware assignments for irq, iobase and the
98 dual ported memory (dp-mem).
99 The fields b-chans and fax-chans announce the available card resources of
100 this types for the user.
101 The state variable indicates the actual drivers state for this card with the
102 following assignments.
103
104 0 -> card has not been booted since driver load
105 1 -> card booting is actually in progess
106 2 -> card is in an error state due to a previous boot failure
107 3 -> card is booted and active
108
109 And the last field (device) shows the name of the ethernet device assigned
110 to this card. Up to the first successful boot this field only shows a -
111 to tell that no net device has been allocated up to now. Once a net device
112 has been allocated it remains assigned to this card, even if a card is
113 rebooted and an boot error occurs.
114
115 Writing to the cardconfX file boots the card or transfers config lines to
116 the cards firmware. The type of data is automatically detected when the
117 first data is written. Only root has write access to this file.
118 The firmware boot files are normally called hyclient.pof for client cards
119 and hyserver.pof for server cards.
120 After successfully writing the boot file, complete config files or single
121 config lines may be copied to this file.
122 If an error occurs the return value given to the writing process has the
123 following additional codes (decimal):
124
125 1000 Another process is currently bootng the card
126 1001 Invalid firmware header
127 1002 Boards dual-port RAM test failed
128 1003 Internal firmware handler error
129 1004 Boot image size invalid
130 1005 First boot stage (bootstrap loader) failed
131 1006 Second boot stage failure
132 1007 Timeout waiting for card ready during boot
133 1008 Operation only allowed in booted state
134 1009 Config line too long
135 1010 Invalid channel number
136 1011 Timeout sending config data
137
138 Additional info about error reasons may be fetched from the log output.
139
1405. The /proc/net/hysdn/cardlogX file
141
142 The cardlogX file entry may be opened multiple for reading by everyone to
143 get the cards and drivers log data. Card messages always start with the
144 keyword LOG. All other lines are output from the driver.
145 The driver log data may be redirected to the syslog by selecting the
146 appropriate bitmask. The cards log messages will always be send to this
147 interface but never to the syslog.
148
149 A root user may write a decimal or hex (with 0x) value t this file to select
150 desired output options. As mentioned above the cards log dat is always
151 written to the cardlog file independent of the following options only used
152 to check and debug the driver itself:
153
154 For example:
155 echo "0x34560078" > /proc/net/hysdn/cardlog0
156 to output the hex log mask 34560078 for card 0.
157
158 The written value is regarded as an unsigned 32-Bit value, bit ored for
159 desired output. The following bits are already assigned:
160
161 0x80000000 All driver log data is alternatively via syslog
162 0x00000001 Log memory allocation errors
163 0x00000010 Firmware load start and close are logged
164 0x00000020 Log firmware record parser
165 0x00000040 Log every firmware write actions
166 0x00000080 Log all card related boot messages
167 0x00000100 Output all config data sent for debugging purposes
168 0x00000200 Only non comment config lines are shown wth channel
169 0x00000400 Additional conf log output
170 0x00001000 Log the asynchronous scheduler actions (config and log)
171 0x00100000 Log all open and close actions to /proc/net/hysdn/card files
172 0x00200000 Log all actions from /proc file entries
173 0x00010000 Log network interface init and deinit
174
1756. Where to get additional info and help
176
177 If you have any problems concerning the driver or configuration contact
178 the Hypercope support team (support@hypercope.de) and or the authors
179 Werner Cornelius (werner@isdn4linux or cornelius@titro.de) or
180 Ulrich Albrecht (ualbrecht@hypercope.de).
181
182
183
184
185
186
187
188
189
190
191
192
193
194
195
diff --git a/Documentation/isdn/README.icn b/Documentation/isdn/README.icn
new file mode 100644
index 000000000000..a5f55eadb3ca
--- /dev/null
+++ b/Documentation/isdn/README.icn
@@ -0,0 +1,148 @@
1$Id: README.icn,v 1.7 2000/08/06 09:22:51 armin Exp $
2
3You can get the ICN-ISDN-card from:
4
5Thinking Objects Software GmbH
6Versbacher Röthe 159
797078 Würzburg
8Tel: +49 931 2877950
9Fax: +49 931 2877951
10
11email info@think.de
12WWW http:/www.think.de
13
14
15The card communicates with the PC by two interfaces:
16 1. A range of 4 successive port-addresses, whose base address can be
17 configured with the switches.
18 2. A memory window with 16KB-256KB size, which can be setup in 16k steps
19 over the whole range of 16MB. Isdn4linux only uses a 16k window.
20 The base address of the window can be configured when loading
21 the lowlevel-module (see README). If using more than one card,
22 all cards are mapped to the same window and activated as needed.
23
24Setting up the IO-address dipswitches for the ICN-ISDN-card:
25
26 Two types of cards exist, one with dip-switches and one with
27 hook-switches.
28
29 1. Setting for the card with hook-switches:
30
31 (0 = switch closed, 1 = switch open)
32
33 S3 S2 S1 Base-address
34 0 0 0 0x300
35 0 0 1 0x310
36 0 1 0 0x320 (Default for isdn4linux)
37 0 1 1 0x330
38 1 0 0 0x340
39 1 0 1 0x350
40 1 1 0 0x360
41 1 1 1 NOT ALLOWED!
42
43 2. Setting for the card with dip-switches:
44
45 (0 = switch closed, 1 = switch open)
46
47 S1 S2 S3 S4 Base-Address
48 0 0 0 0 0x300
49 0 0 0 1 0x310
50 0 0 1 0 0x320 (Default for isdn4linux)
51 0 0 1 1 0x330
52 0 1 0 0 0x340
53 0 1 0 1 0x350
54 0 1 1 0 0x360
55 0 1 1 1 NOT ALLOWED!
56 1 0 0 0 0x308
57 1 0 0 1 0x318
58 1 0 1 0 0x328
59 1 0 1 1 0x338
60 1 1 0 0 0x348
61 1 1 0 1 0x358
62 1 1 1 0 0x368
63 1 1 1 1 NOT ALLOWED!
64
65The ICN driver may be built into the kernel or as a module. Initialization
66depends on how the driver is built:
67
68Driver built into the kernel:
69
70 The ICN driver can be configured using the commandline-feature while
71 loading the kernel with LILO or LOADLIN. It accepts the following syntax:
72
73 icn=p,m[,idstring1[,idstring2]]
74
75 where
76
77 p = portbase (default: 0x320)
78 m = shared memory (default: 0xd0000)
79
80 When using the ICN double card (4B), you MUST define TWO idstrings.
81 idstring must start with a character! There is no way for the driver
82 to distinguish between a 2B and 4B type card. Therefore, by supplying
83 TWO idstrings, you tell the driver that you have a 4B installed.
84
85 If you like to use more than one card, you can use the program
86 "icnctrl" from the utility-package to configure additional cards.
87 You need to configure shared memory only once, since the icn-driver
88 maps all cards into the same address-space.
89
90 Using the "icnctrl"-utility, portbase and shared memory can also be
91 changed during runtime.
92
93 The D-channel protocol is configured by loading different firmware
94 into the card's memory using the "icnctrl"-utility.
95
96
97Driver built as module:
98
99 The module icn.o can be configured during "insmod'ing" it by
100 appending its parameters to the insmod-commandline. The following
101 syntax is accepted:
102
103 portbase=p membase=m icn_id=idstring [icn_id2=idstring2]
104
105 where p, m, idstring1 and idstring2 have the same meanings as the
106 parameters described for the kernel-version above.
107
108 When using the ICN double card (4B), you MUST define TWO idstrings.
109 idstring must start with a character! There is no way for the driver
110 to distinguish between a 2B and 4B type card. Therefore, by supplying
111 TWO idstrings, you tell the driver that you have a 4B installed.
112
113 Using the "icnctrl"-utility, the same features apply to the modularized
114 version like to the kernel-builtin one.
115
116 The D-channel protocol is configured by loading different firmware
117 into the card's memory using the "icnctrl"-utility.
118
119Loading the firmware into the card:
120
121 The firmware is supplied together with the isdn4k-utils package. It
122 can be found in the subdirectory icnctrl/firmware/
123
124 There are 3 files:
125
126 loadpg.bin - Image of the bootstrap loader.
127 pc_1t_ca.bin - Image of firmware for german 1TR6 protocol.
128 pc_eu_ca.bin - Image if firmware for EDSS1 (Euro-ISDN) protocol.
129
130 Assuming you have installed the utility-package correctly, the firmware
131 will be downloaded into the 2B-card using the following command:
132
133 icnctrl -d Idstring load /etc/isdn/loadpg.bin /etc/isdn/pc_XX_ca.bin
134
135 where XX is either "1t" or "eu", depending on the D-Channel protocol
136 used on your S0-bus and Idstring is the Name of the card, given during
137 insmod-time or (for kernel-builtin driver) on the kernel commandline.
138
139 To load a 4B-card, the same command is used, except a second firmware
140 file is appended to the commandline of icnctrl.
141
142 -> After downloading firmware, the two LEDs at the back cover of the card
143 (ICN-4B: 4 LEDs) must be blinking intermittently now. If a connection
144 is up, the corresponding led is lit continuously.
145
146 For further documentation (adding more ICN-cards), refer to the manpage
147 icnctrl.8 which is included in the isdn4k-utils package.
148
diff --git a/Documentation/isdn/README.pcbit b/Documentation/isdn/README.pcbit
new file mode 100644
index 000000000000..5125002282e5
--- /dev/null
+++ b/Documentation/isdn/README.pcbit
@@ -0,0 +1,40 @@
1------------------------------------------------------------------------------
2 README file for the PCBIT-D Device Driver.
3------------------------------------------------------------------------------
4
5The PCBIT is a Euro ISDN adapter manufactured in Portugal by Octal and
6developed in cooperation with Portugal Telecom and Inesc.
7The driver interfaces with the standard kernel isdn facilities
8originally developed by Fritz Elfert in the isdn4linux project.
9
10The common versions of the pcbit board require a firmware that is
11distributed (and copyrighted) by the manufacturer. To load this
12firmware you need "pcbitctl" available on the standard isdn4k-utils
13package or in the pcbit package available in:
14
15ftp://ftp.di.fc.ul.pt/pub/systems/Linux/isdn
16
17Known Limitations:
18
19- The board reset procedure is at the moment incorrect and will only
20allow you to load the firmware after a hard reset.
21
22- Only HDLC in B-channels is supported at the moment. There is no
23current support for X.25 in B or D channels nor LAPD in B
24channels. The main reason is that these two other protocol modes have,
25to my knowledge, very little use. If you want to see them implemented
26*do* send me a mail.
27
28- The driver often triggers errors in the board that I and the
29manufacturer believe to be caused by bugs in the firmware. The current
30version includes several procedures for error recovery that should
31allow normal operation. Plans for the future include cooperation with
32the manufacturer in order to solve this problem.
33
34Information/hints/help can be obtained in the linux isdn
35mailing list (isdn4linux@listserv.isdn4linux.de) or directly from me.
36
37regards,
38 Pedro.
39
40<roque@di.fc.ul.pt>
diff --git a/Documentation/isdn/README.sc b/Documentation/isdn/README.sc
new file mode 100644
index 000000000000..1153cd926059
--- /dev/null
+++ b/Documentation/isdn/README.sc
@@ -0,0 +1,281 @@
1Welcome to Beta Release 2 of the combination ISDN driver for SpellCaster's
2ISA ISDN adapters. Please note this release 2 includes support for the
3DataCommute/BRI and TeleCommute/BRI adapters only and any other use is
4guaranteed to fail. If you have a DataCommute/PRI installed in the test
5computer, we recommend removing it as it will be detected but will not
6be usable. To see what we have done to Beta Release 2, see section 3.
7
8Speaking of guarantees, THIS IS BETA SOFTWARE and as such contains
9bugs and defects either known or unknown. Use this software at your own
10risk. There is NO SUPPORT for this software. Some help may be available
11through the web site or the mailing list but such support is totally at
12our own option and without warranty. If you choose to assume all and
13total risk by using this driver, we encourage you to join the beta
14mailing list.
15
16To join the Linux beta mailing list, send a message to:
17majordomo@spellcast.com with the words "subscribe linux-beta" as the only
18contents of the message. Do not include a signature. If you choose to
19remove yourself from this list at a later date, send another message to
20the same address with the words "unsubscribe linux-beta" as its only
21contents.
22
23TABLE OF CONTENTS
24-----------------
25 1. Introduction
26 1.1 What is ISDN4Linux?
27 1.2 What is different between this driver and previous drivers?
28 1.3 How do I setup my system with the correct software to use
29 this driver release?
30
31 2. Basic Operations
32 2.1 Unpacking and installing the driver
33 2.2 Read the man pages!!!
34 2.3 Installing the driver
35 2.4 Removing the driver
36 2.5 What to do if it doesn't load
37 2.6 How to setup ISDN4Linux with the driver
38
39 3. Beta Change Summaries and Miscellaneous Notes
40
411. Introduction
42---------------
43
44The revision 2 Linux driver for SpellCaster ISA ISDN adapters is built
45upon ISDN4Linux available separately or as included in Linux 2.0 and later.
46The driver will support a maximum of 4 adapters in any one system of any
47type including DataCommute/BRI, DataCommute/PRI and TeleCommute/BRI for a
48maximum of 92 channels for host. The driver is supplied as a module in
49source form and needs to be complied before it can be used. It has been
50tested on Linux 2.0.20.
51
521.1 What Is ISDN4Linux
53
54ISDN4Linux is a driver and set of tools used to access and use ISDN devices
55on a Linux platform in a common and standard way. It supports HDLC and PPP
56protocols and offers channel bundling and MLPPP support. To use ISDN4Linux
57you need to configure your kernel for ISDN support and get the ISDN4Linux
58tool kit from our web site.
59
60ISDN4Linux creates a channel pool from all of the available ISDN channels
61and therefore can function across adapters. When an ISDN4Linux compliant
62driver (such as ours) is loaded, all of the channels go into a pool and
63are used on a first-come first-served basis. In addition, individual
64channels can be specifically bound to particular interfaces.
65
661.2 What is different between this driver and previous drivers?
67
68The revision 2 driver besides adopting the ISDN4Linux architecture has many
69subtle and not so subtle functional differences from previous releases. These
70include:
71 - More efficient shared memory management combined with a simpler
72 configuration. All adapters now use only 16Kbytes of shared RAM
73 versus between 16K and 64K. New methods for using the shared RAM
74 allow us to utilize all of the available RAM on the adapter through
75 only one 16K page.
76 - Better detection of available upper memory. The probing routines
77 have been improved to better detect available shared RAM pages and
78 used pages are now locked.
79 - Decreased loading time and a wider range of I/O ports probed.
80 We have significantly reduced the amount of time it takes to load
81 the driver and at the same time doubled the number of I/O ports
82 probed increasing the likelihood of finding an adapter.
83 - We now support all ISA adapter models with a single driver instead
84 of separate drivers for each model. The revision 2 driver supports
85 the DataCommute/BRI, DataCommute/PRI and TeleCommute/BRI in any
86 combination up to a maximum of four adapters per system.
87 - On board PPP protocol support has been removed in favour of the
88 sync-PPP support used in ISDN4Linux. This means more control of
89 the protocol parameters, faster negotiation time and a more
90 familiar interface.
91
921.3 How do I setup my system with the correct software to use
93 this driver release?
94
95Before you can compile, install and use the SpellCaster ISA ISDN driver, you
96must ensure that the following software is installed, configured and running:
97
98 - Linux kernel 2.0.20 or later with the required init and ps
99 versions. Please see your distribution vendor for the correct
100 utility packages. The latest kernel is available from
101 ftp://sunsite.unc.edu/pub/Linux/kernel/v2.0/
102
103 - The latest modules package (modules-2.0.0.tar.gz) from
104 ftp://sunsite.unc.edu/pub/Linux/kernel/modules-2.0.0.tar.gz
105
106 - The ISDN4Linux tools available from
107 ftp://ftp.franken.de/pub/isdn4linux/v2.0/isdn4k-utils-2.0.tar.gz
108 This package may fail to compile for you so you can alternatively
109 get a pre-compiled version from
110 ftp://ftp.spellcast.com/pub/drivers/isdn4linux/isdn4k-bin-2.0.tar.gz
111
112
1132. Basic Operations
114-------------------
115
1162.1 Unpacking and installing the driver
117
118 1. As root, create a directory in a convenient place. We suggest
119 /usr/src/spellcaster.
120
121 2. Unpack the archive with :
122 tar xzf sc-n.nn.tar.gz -C /usr/src/spellcaster
123
124 3. Change directory to /usr/src/spellcaster
125
126 4. Read the README and RELNOTES files.
127
128 5. Run 'make' and if all goes well, run 'make install'.
129
1302.2 Read the man pages!!!
131
132Make sure you read the scctrl(8) and sc(4) manual pages before continuing
133any further. Type 'man 8 scctrl' and 'man 4 sc'.
134
1352.3 Installing the driver
136
137To install the driver, type '/sbin/insmod sc' as root. sc(4) details options
138you can specify but you shouldn't need to use any unless this doesn't work.
139
140Make sure the driver loaded and detected all of the adapters by typing
141'dmesg'.
142
143The driver can be configured so that it is loaded upon startup. To do this,
144edit the file "/etc/modules/'uname -f'/'uname -v'" and insert the driver name
145"sc" into this file.
146
1472.4 Removing the driver
148
149To remove the driver, delete any interfaces that may exist (see isdnctrl(8)
150for more on this) and then type '/sbin/rmmod sc'.
151
1522.5 What to do if it doesn't load
153
154If, when you try to install the driver, you get a message mentioning
155'register_isdn' then you do not have the ISDN4Linux system installed. Please
156make sure that ISDN support is configured in the kernel.
157
158If you get a message that says 'initialization of sc failed', then the
159driver failed to detect an adapter or failed to find resources needed such
160as a free IRQ line or shared memory segment. If you are sure there are free
161resources available, use the insmod options detailed in sc(4) to override
162the probing function.
163
164Upon testing, the following problem was noted, the driver would load without
165problems, but the board would not respond beyond that point. When a check was
166done with 'cat /proc/interrupts' the interrupt count for sc was 0. In the event
167of this problem, change the BIOS settings so that the interrupts in question are
168reserved for ISA use only.
169
170
1712.6 How to setup ISDN4Linux with the driver
172
173There are three main configurations which you can use with the driver:
174
175A) Basic HDLC connection
176B) PPP connection
177C) MLPPP connection
178
179It should be mentioned here that you may also use a tty connection if you
180desire. The Documentation directory of the isdn4linux subsystem offers good
181documentation on this feature.
182
183A) 10 steps to the establishment of a basic HDLC connection
184-----------------------------------------------------------
185
186- please open the isdn-hdlc file in the examples directory and follow along...
187
188 This file is a script used to configure a BRI ISDN TA to establish a
189 basic HDLC connection between its two channels. Two network
190 interfaces are created and two routes added between the channels.
191
192 i) using the isdnctrl utility, add an interface with "addif" and
193 name it "isdn0"
194 ii) add the outgoing and inbound telephone numbers
195 iii) set the Layer 2 protocol to hdlc
196 iv) set the eaz of the interface to be the phone number of that
197 specific channel
198 v) to turn the callback features off, set the callback to "off" and
199 the callback delay (cbdelay) to 0.
200 vi) the hangup timeout can be set to a specified number of seconds
201 vii) the hangup upon incoming call can be set on or off
202 viii) use the ifconfig command to bring up the network interface with
203 a specific IP address and point to point address
204 ix) add a route to the IP address through the isdn0 interface
205 x) a ping should result in the establishment of the connection
206
207
208B) Establishment of a PPP connection
209------------------------------------
210
211- please open the isdn-ppp file in the examples directory and follow along...
212
213 This file is a script used to configure a BRI ISDN TA to establish a
214 PPP connection between the two channels. The file is almost
215 identical to the HDLC connection example except that the packet
216 encapsulation type has to be set.
217
218 use the same procedure as in the HDLC connection from steps i) to
219 iii) then, after the Layer 2 protocol is set, set the encapsulation
220 "encap" to syncppp. With this done, the rest of the steps, iv) to x)
221 can be followed from above.
222
223 Then, the ipppd (ippp daemon) must be setup:
224
225 xi) use the ipppd function found in /sbin/ipppd to set the following:
226 xii) take out (minus) VJ compression and bsd compression
227 xiii) set the mru size to 2000
228 xiv) link the two /dev interfaces to the daemon
229
230NOTE: A "*" in the inbound telephone number specifies that a call can be
231accepted on any number.
232
233C) Establishment of a MLPPP connection
234--------------------------------------
235
236- please open the isdn-mppp file in the examples directory and follow along...
237
238 This file is a script used to configure a BRI ISDN TA to accept a
239 Multi Link PPP connection.
240
241 i) using the isdnctrl utility, add an interface with "addif" and
242 name it "ippp0"
243 ii) add the inbound telephone number
244 iii) set the Layer 2 protocol to hdlc and the Layer 3 protocol to
245 trans (transparent)
246 iv) set the packet encapsulation to syncppp
247 v) set the eaz of the interface to be the phone number of that
248 specific channel
249 vi) to turn the callback features off, set the callback to "off" and
250 the callback delay (cbdelay) to 0.
251 vi) the hangup timeout can be set to a specified number of seconds
252 vii) the hangup upon incoming call can be set on or off
253 viii) add a slave interface and name it "ippp32" for example
254 ix) set the similar parameters for the ippp32 interface
255 x) use the ifconfig command to bring-up the ippp0 interface with a
256 specific IP address and point to point address
257 xi) add a route to the IP address through the ippp0 interface
258 xii) use the ipppd function found in /sbin/ipppd to set the following:
259 xiii) take out (minus) bsd compression
260 xiv) set the mru size to 2000
261 xv) add (+) the multi-link function "+mp"
262 xvi) link the two /dev interfaces to the daemon
263
264NOTE: To use the MLPPP connection to dial OUT to a MLPPP connection, change
265the inbound telephone numbers to the outgoing telephone numbers of the MLPPP
266host.
267
268
2693. Beta Change Summaries and Miscellaneous Notes
270------------------------------------------------
271When using the "scctrl" utility to upload firmware revisions on the board,
272please note that the byte count displayed at the end of the operation may be
273different from the total number of bytes in the "dcbfwn.nn.sr" file. Please
274disregard the displayed byte count.
275
276It was noted that in Beta Release 1, the module would fail to load and result
277in a segmentation fault when 'insmod'ed. This problem was created when one of
278the isdn4linux parameters, (isdn_ctrl, data field) was filled in. In some
279cases, this data field was NULL, and was left unchecked, so when it was
280referenced... segv. The bug has been fixed around line 63-68 of event.c.
281
diff --git a/Documentation/isdn/README.syncppp b/Documentation/isdn/README.syncppp
new file mode 100644
index 000000000000..27d260095cce
--- /dev/null
+++ b/Documentation/isdn/README.syncppp
@@ -0,0 +1,58 @@
1Some additional information for setting up a syncPPP
2connection using network interfaces.
3---------------------------------------------------------------
4
5You need one thing beside the isdn4linux package:
6
7 a patched pppd .. (I called it ipppd to show the difference)
8
9Compiling isdn4linux with sync PPP:
10-----------------------------------
11To compile isdn4linux with the sync PPP part, you have
12to answer the appropriate question when doing a "make config"
13Don't forget to load the slhc.o
14module before the isdn.o module, if VJ-compression support
15is not compiled into your kernel. (e.g if you have no PPP or
16CSLIP in the kernel)
17
18Using isdn4linux with sync PPP:
19-------------------------------
20Sync PPP is just another encapsulation for isdn4linux. The
21name to enable sync PPP encapsulation is 'syncppp' .. e.g:
22
23 /sbin/isdnctrl encap ippp0 syncppp
24
25The name of the interface is here 'ippp0'. You need
26one interface with the name 'ippp0' to saturate the
27ipppd, which checks the ppp version via this interface.
28Currently, all devices must have the name ipppX where
29'X' is a decimal value.
30
31To set up a PPP connection you need the ipppd .. You must start
32the ipppd once after installing the modules. The ipppd
33communicates with the isdn4linux link-level driver using the
34/dev/ippp0 to /dev/ippp15 devices. One ipppd can handle
35all devices at once. If you want to use two PPP connections
36at the same time, you have to connect the ipppd to two
37devices .. and so on.
38I've implemented one additional option for the ipppd:
39 'useifip' will get (if set to not 0.0.0.0) the IP address
40 for the negotiation from the attached network-interface.
41(also: ipppd will try to negotiate pointopoint IP as remote IP)
42You must disable BSD-compression, this implementation can't
43handle compressed packets.
44
45Check the etc/rc.isdn.syncppp in the isdn4kernel-util package
46for an example setup script.
47
48To use the MPPP stuff, you must configure a slave device
49with isdn4linux. Now call the ipppd with the '+mp' option.
50To increase the number of links, you must use the
51'addlink' option of the isdnctrl tool. (rc.isdn.syncppp.MPPP is
52an example script)
53
54enjoy it,
55 michael
56
57
58
diff --git a/Documentation/isdn/README.x25 b/Documentation/isdn/README.x25
new file mode 100644
index 000000000000..e561a77c4e22
--- /dev/null
+++ b/Documentation/isdn/README.x25
@@ -0,0 +1,184 @@
1
2X.25 support within isdn4linux
3==============================
4
5This is alpha/beta test code. Use it completely at your own risk.
6As new versions appear, the stuff described here might suddenly change
7or become invalid without notice.
8
9Keep in mind:
10
11You are using several new parts of the 2.2.x kernel series which
12have not been tested in a large scale. Therefore, you might encounter
13more bugs as usual.
14
15- If you connect to an X.25 neighbour not operated by yourself, ASK the
16 other side first. Be prepared that bugs in the protocol implementation
17 might result in problems.
18
19- This implementation has never wiped out my whole hard disk yet. But as
20 this is experimental code, don't blame me if that happened to you.
21 Backing up important data will never harm.
22
23- Monitor your isdn connections while using this software. This should
24 prevent you from undesired phone bills in case of driver problems.
25
26
27
28
29How to configure the kernel
30===========================
31
32The ITU-T (former CCITT) X.25 network protocol layer has been implemented
33in the Linux source tree since version 2.1.16. The isdn subsystem might be
34useful to run X.25 on top of ISDN. If you want to try it, select
35
36 "CCITT X.25 Packet Layer"
37
38from the networking options as well as
39
40 "ISDN Support" and "X.25 PLP on Top of ISDN"
41
42from the ISDN subsystem options when you configure your kernel for
43compilation. You currently also need to enable
44"Prompt for development and/or incomplete code/drivers" from the
45"Code maturity level options" menu. For the x25trace utility to work
46you also need to enable "Packet socket".
47
48For local testing it is also recommended to enable the isdnloop driver
49from the isdn subsystem's configuration menu.
50
51For testing, it is recommended that all isdn drivers and the X.25 PLP
52protocol are compiled as loadable modules. Like this, you can recover
53from certain errors by simply unloading and reloading the modules.
54
55
56
57What's it for? How to use it?
58=============================
59
60X.25 on top of isdn might be useful with two different scenarios:
61
62- You might want to access a public X.25 data network from your Linux box.
63 You can use i4l if you were physically connected to the X.25 switch
64 by an ISDN B-channel (leased line as well as dial up connection should
65 work).
66
67 This corresponds to ITU-T recommendation X.31 Case A (circuit-mode
68 access to PSPDN [packet switched public data network]).
69
70 NOTE: X.31 also covers a Case B (access to PSPDN via virtual
71 circuit / packet mode service). The latter mode (which in theory
72 also allows using the D-channel) is not supported by isdn4linux.
73 It should however be possible to establish such packet mode connections
74 with certain active isdn cards provided that the firmware supports X.31
75 and the driver exports this functionality to the user. Currently,
76 the AVM B1 driver is the only driver which does so. (It should be
77 possible to access D-channel X.31 with active AVM cards using the
78 CAPI interface of the AVM-B1 driver).
79
80- Or you might want to operate certain ISDN teleservices on your linux
81 box. A lot of those teleservices run on top of the ISO-8208
82 (DTE-DTE mode) network layer protocol. ISO-8208 is essentially the
83 same as ITU-T X.25.
84
85 Popular candidates of such teleservices are EUROfile transfer or any
86 teleservice applying ITU-T recommendation T.90.
87
88To use the X.25 protocol on top of isdn, just create an isdn network
89interface as usual, configure your own and/or peer's ISDN numbers,
90and choose x25iface encapsulation by
91
92 isdnctrl encap <iface-name> x25iface.
93
94Once encap is set like this, the device can be used by the X.25 packet layer.
95
96All the stuff needed for X.25 is implemented inside the isdn link
97level (mainly isdn_net.c and some new source files). Thus, it should
98work with every existing HL driver. I was able to successfully open X.25
99connections on top of the isdnloop driver and the hisax driver.
100"x25iface"-encapsulation bypasses demand dialing. Dialing will be
101initiated when the upper (X.25 packet) layer requests the lapb datalink to
102be established. But hangup timeout is still active. Whenever a hangup
103occurs, all existing X.25 connections on that link will be cleared
104It is recommended to use sufficiently large hangup-timeouts for the
105isdn interfaces.
106
107
108In order to set up a conforming protocol stack you also need to
109specify the proper l2_prot parameter:
110
111To operate in ISO-8208 X.25 DTE-DTE mode, use
112
113 isdnctrl l2_prot <iface-name> x75i
114
115To access an X.25 network switch via isdn (your linux box is the DTE), use
116
117 isdnctrl l2_prot <iface-name> x25dte
118
119To mimic an X.25 network switch (DCE side of the connection), use
120
121 isdnctrl l2_prot <iface-name> x25dce
122
123However, x25dte or x25dce is currently not supported by any real HL
124level driver. The main difference between x75i and x25dte/dce is that
125x25d[tc]e uses fixed lap_b addresses. With x75i, the side which
126initiates the isdn connection uses the DTE's lap_b address while the
127called side used the DCE's lap_b address. Thus, l2_prot x75i might
128probably work if you access a public X.25 network as long as the
129corresponding isdn connection is set up by you. At least one test
130was successful to connect via isdn4linux to an X.25 switch using this
131trick. At the switch side, a terminal adapter X.21 was used to connect
132it to the isdn.
133
134
135How to set up a test installation?
136==================================
137
138To test X.25 on top of isdn, you need to get
139
140- a recent version of the "isdnctrl" program that supports setting the new
141 X.25 specific parameters.
142
143- the x25-utils-2.X package from
144 ftp://ftp.hes.iki.fi/pub/ham/linux/ax25/x25utils-*
145 (don't confuse the x25-utils with the ax25-utils)
146
147- an application program that uses linux PF_X25 sockets (some are
148 contained in the x25-util package).
149
150Before compiling the user level utilities make sure that the compiler/
151preprocessor will fetch the proper kernel header files of this kernel
152source tree. Either make /usr/include/linux a symbolic link pointing to
153this kernel's include/linux directory or set the appropriate compiler flags.
154
155When all drivers and interfaces are loaded and configured you need to
156ifconfig the network interfaces up and add X.25-routes to them. Use
157the usual ifconfig tool.
158
159ifconfig <iface-name> up
160
161But a special x25route tool (distributed with the x25-util package)
162is needed to set up X.25 routes. I.e.
163
164x25route add 01 <iface-name>
165
166will cause all x.25 connections to the destination X.25-address
167"01" to be routed to your created isdn network interface.
168
169There are currently no real X.25 applications available. However, for
170tests, the x25-utils package contains a modified version of telnet
171and telnetd that uses X.25 sockets instead of tcp/ip sockets. You can
172use those for your first tests. Furthermore, you might check
173ftp://ftp.hamburg.pop.de/pub/LOCAL/linux/i4l-eft/ which contains some
174alpha-test implementation ("eftp4linux") of the EUROfile transfer
175protocol.
176
177The scripts distributed with the eftp4linux test releases might also
178provide useful examples for setting up X.25 on top of isdn.
179
180The x25-utility package also contains an x25trace tool that can be
181used to monitor X.25 packets received by the network interfaces.
182The /proc/net/x25* files also contain useful information.
183
184- Henner
diff --git a/Documentation/isdn/syncPPP.FAQ b/Documentation/isdn/syncPPP.FAQ
new file mode 100644
index 000000000000..3257a4bc0786
--- /dev/null
+++ b/Documentation/isdn/syncPPP.FAQ
@@ -0,0 +1,224 @@
1simple isdn4linux PPP FAQ .. to be continued .. not 'debugged'
2-------------------------------------------------------------------
3
4Q01: what's pppd, ipppd, syncPPP, asyncPPP ??
5Q02: error message "this system lacks PPP support"
6Q03: strange information using 'ifconfig'
7Q04: MPPP?? What's that and how can I use it ...
8Q05: I tried MPPP but it doesn't work
9Q06: can I use asynchronous PPP encapsulation with network devices
10Q07: A SunISDN machine can't connect to my i4l system
11Q08: I wanna talk to several machines, which need different configs
12Q09: Starting the ipppd, I get only error messages from i4l
13Q10: I wanna use dynamic IP address assignment
14Q11: I can't connect. How can I check where the problem is.
15Q12: How can I reduce login delay?
16
17-------------------------------------------------------------------
18
19Q01: pppd, ipppd, syncPPP, asyncPPP .. what is that ?
20 what should I use?
21A: The pppd is for asynchronous PPP .. asynchronous means
22 here, the framing is character based. (e.g when
23 using ttyI* or tty* devices)
24
25 The ipppd handles PPP packets coming in HDLC
26 frames (bit based protocol) ... The PPP driver
27 in isdn4linux pushes all IP packets direct
28 to the network layer and all PPP protocol
29 frames to the /dev/ippp* device.
30 So, the ipppd is a simple external network
31 protocol handler.
32
33 If you login into a remote machine using the
34 /dev/ttyI* devices and then enable PPP on the
35 remote terminal server -> use the 'old' pppd
36
37 If your remote side immediately starts to send
38 frames ... you probably connect to a
39 syncPPP machine .. use the network device part
40 of isdn4linux with the 'syncppp' encapsulation
41 and make sure, that the ipppd is running and
42 connected to at least one /dev/ippp*. Check the
43 isdn4linux manual on how to configure a network device.
44
45--
46
47Q02: when I start the ipppd .. I only get the
48 error message "this system lacks PPP support"
49A: check that at least the device 'ippp0' exists.
50 (you can check this e.g with the program 'ifconfig')
51 The ipppd NEEDS this device under THIS name ..
52 If this device doesn't exists, use:
53 isdnctrl addif ippp0
54 isdnctrl encap ippp0 syncppp
55 ... (see isdn4linux doc for more) ...
56A: Maybe you have compiled the ipppd with another
57 kernel source tree than the kernel you currently
58 run ...
59
60--
61
62Q03: when I list the netdevices with ifconfig I see, that
63 my ISDN interface has a HWaddr and IRQ=0 and Base
64 address = 0
65A: The device is a fake ethernet device .. ignore IRQ and baseaddr
66 You need the HWaddr only for ethernet encapsulation.
67
68--
69
70Q04: MPPP?? What's that and how can I use it ...
71
72A: MPPP or MP or MPP (Warning: MP is also an
73 acronym for 'Multi Processor') stands for
74 Multi Point to Point and means bundling
75 of several channels to one logical stream.
76 To enable MPPP negotiation you must call the
77 ipppd with the '+mp' option.
78 You must also configure a slave device for
79 every additional channel. (see the i4l manual
80 for more)
81 To use channel bundling you must first activate
82 the 'master' or initial call. Now you can add
83 the slave channels with the command:
84 isdnctrl addlink <device>
85 e.g:
86 isdnctrl addlink ippp0
87 This is different from other encapsulations of
88 isdn4linux! With syncPPP, there is no automatic
89 activation of slave devices.
90
91--
92
93Q05: I tried MPPP but it doesn't work .. the ipppd
94 writes in the debug log something like:
95 .. rcvd [0][proto=0x3d] c0 00 00 00 80 fd 01 01 00 0a ...
96 .. sent [0][LCP ProtRej id=0x2 00 3d c0 00 00 00 80 fd 01 ...
97
98A: you forgot to compile MPPP/RFC1717 support into the
99 ISDN Subsystem. Recompile with this option enabled.
100
101--
102
103Q06: can I use asynchronous PPP encapsulation
104 over the network interface of isdn4linux ..
105
106A: No .. that's not possible .. Use the standard
107 PPP package over the /dev/ttyI* devices. You
108 must not use the ipppd for this.
109
110--
111
112Q07: A SunISDN machine tries to connect my i4l system,
113 which doesn't work.
114 Checking the debug log I just saw garbage like:
115!![ ... fill in the line ... ]!!
116
117A: The Sun tries to talk asynchronous PPP ... i4l
118 can't understand this ... try to use the ttyI*
119 devices with the standard PPP/pppd package
120
121A: (from Alexanter Strauss: )
122!![ ... fill in mail ]!!
123
124--
125
126Q08: I wanna talk to remote machines, which need
127 a different configuration. The only way
128 I found to do this is to kill the ipppd and
129 start a new one with another config to connect
130 to the second machine.
131
132A: you must bind a network interface explicitly to
133 an ippp device, where you can connect a (for this
134 interface) individually configured ipppd.
135
136--
137
138Q09: When I start the ipppd I only get error messages
139 from the i4l driver ..
140
141A: When starting, the ipppd calls functions which may
142 trigger a network packet. (e.g gethostbyname()).
143 Without the ipppd (at this moment, it is not
144 fully started) we can't handle this network request.
145 Try to configure hostnames necessary for the ipppd
146 in your local /etc/hosts file or in a way, that
147 your system can resolve it without using an
148 isdn/ippp network-interface.
149
150--
151
152Q10: I wanna use dynamic IP address assignment ... How
153 must I configure the network device.
154
155A: At least you must have a route which forwards
156 a packet to the ippp network-interface to trigger
157 the dial-on-demand.
158 A default route to the ippp-interface will work.
159 Now you must choose a dummy IP address for your
160 interface.
161 If for some reason you can't set the default
162 route to the ippp interface, you may take any
163 address of the subnet from which you expect your
164 dynamic IP number and set a 'network route' for
165 this subnet to the ippp interface.
166 To allow overriding of the dummy address you
167 must call the ipppd with the 'ipcp-accept-local' option.
168
169A: You must know, how the ipppd gets the addresses it wanna
170 configure. If you don't give any option, the ipppd
171 tries to negotiate the local host address!
172 With the option 'noipdefault' it requests an address
173 from the remote machine. With 'useifip' it gets the
174 addresses from the net interface. Or you set the address
175 on the option line with the <a.b.c.d:e.f.g.h> option.
176 Note: the IP address of the remote machine must be configured
177 locally or the remote machine must send it in an IPCP request.
178 If your side doesn't know the IP address after negotiation, it
179 closes the connection!
180 You must allow overriding of address with the 'ipcp-accept-*'
181 options, if you have set your own or the remote address
182 explicitly.
183
184A: Maybe you try these options .. e.g:
185
186 /sbin/ipppd :$REMOTE noipdefault /dev/ippp0
187
188 where REMOTE must be the address of the remote machine (the
189 machine, which gives you your address)
190
191--
192
193Q11: I can't connect. How can I check where the problem is.
194
195A: A good help log is the debug output from the ipppd...
196 Check whether you can find there:
197 - only a few LCP-conf-req SENT messages (less then 10)
198 and then a Term-REQ:
199 -> check whether your ISDN card is well configured
200 it seems, that your machine doesn't dial
201 (IRQ,IO,Proto, etc problems)
202 Configure your ISDN card to print debug messages and
203 check the /dev/isdnctrl output next time. There
204 you can see, whether there is activity on the card/line.
205 - there are at least a few RECV messages in the log:
206 -> fine: your card is dialing and your remote machine
207 tries to talk with you. Maybe only a missing
208 authentication. Check your ipppd configuration again.
209 - the ipppd exits for some reason:
210 -> not good ... check /var/adm/syslog and /var/adm/daemon.
211 Could be a bug in the ipppd.
212
213--
214
215Q12: How can I reduce login delay?
216
217A: Log a login session ('debug' log) and check which options
218 your remote side rejects. Next time configure your ipppd
219 to not negotiate these options. Another 'side effect' is, that
220 this increases redundancy. (e.g your remote side is buggy and
221 rejects options in a wrong way).
222
223
224
generated by cgit v1.2.2 (git 2.25.0) at 2024-09-21 03:40:11 -0400