aboutsummaryrefslogtreecommitdiffstats
path: root/Documentation/isdn/README.fax
diff options
context:
space:
mode:
authorLinus Torvalds <torvalds@ppc970.osdl.org>2005-04-16 18:20:36 -0400
committerLinus Torvalds <torvalds@ppc970.osdl.org>2005-04-16 18:20:36 -0400
commit1da177e4c3f41524e886b7f1b8a0c1fc7321cac2 (patch)
tree0bba044c4ce775e45a88a51686b5d9f90697ea9d /Documentation/isdn/README.fax
Linux-2.6.12-rc2v2.6.12-rc2
Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
Diffstat (limited to 'Documentation/isdn/README.fax')
-rw-r--r--Documentation/isdn/README.fax45
1 files changed, 45 insertions, 0 deletions
diff --git a/Documentation/isdn/README.fax b/Documentation/isdn/README.fax
new file mode 100644
index 000000000000..5314958a8a6e
--- /dev/null
+++ b/Documentation/isdn/README.fax
@@ -0,0 +1,45 @@
1
2Fax with isdn4linux
3===================
4
5When enabled during kernel configuration, the tty emulator
6of the ISDN subsystem is capable of the Fax Class 2 commands.
7
8This only makes sense under the following conditions :
9
10- You need the commands as dummy, because you are using
11 hylafax (with patch) for AVM capi.
12- You want to use the fax capabilities of your isdn-card.
13 (supported cards are listed below)
14
15
16NOTE: This implementation does *not* support fax with passive
17 ISDN-cards (known as softfax). The low-level driver of
18 the ISDN-card and/or the card itself must support this.
19
20
21Supported ISDN-Cards
22--------------------
23
24Eicon DIVA Server BRI/PCI
25 - full support with both B-channels.
26
27Eicon DIVA Server 4BRI/PCI
28 - full support with all B-channels.
29
30Eicon DIVA Server PRI/PCI
31 - full support on amount of B-channels
32 depending on DSPs on board.
33
34
35
36The command set is known as Class 2 (not Class 2.0) and
37can be activated by AT+FCLASS=2
38
39
40The interface between the link-level-module and the hardware-level driver
41is described in the files INTERFACE.fax and INTERFACE.
42
43Armin
44mac@melware.de
45