[PATCH] I2C: Move hwmon drivers (3/3)

Part 3: Move the drivers documentation, plus two general documentation
files.

Note that the patch "adds trailing whitespace", because it does move the
files as-is, and some files happen to have trailing whitespace.

Signed-off-by: Jean Delvare <khali@linux-fr.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

1 files changed, 0 insertions, 66 deletions

diff --git a/Documentation/i2c/chips/w83627hf b/Documentation/i2c/chips/w83627hf
deleted file mode 100644
index 78f37c2d602e..000000000000
--- a/Documentation/i2c/chips/w83627hf
+++ /dev/null
@@ -1,66 +0,0 @@
-Kernel driver w83627hf
-======================
-
-Supported chips:
-  * Winbond W83627HF (ISA accesses ONLY)
-    Prefix: 'w83627hf'
-    Addresses scanned: ISA address retrieved from Super I/O registers
-    Datasheet: http://www.winbond.com/PDF/sheet/w83627hf.pdf
-  * Winbond W83627THF
-    Prefix: 'w83627thf'
-    Addresses scanned: ISA address retrieved from Super I/O registers
-    Datasheet: http://www.winbond.com/PDF/sheet/w83627thf.pdf
-  * Winbond W83697HF
-    Prefix: 'w83697hf'
-    Addresses scanned: ISA address retrieved from Super I/O registers
-    Datasheet: http://www.winbond.com/PDF/sheet/697hf.pdf
-  * Winbond W83637HF
-    Prefix: 'w83637hf'
-    Addresses scanned: ISA address retrieved from Super I/O registers
-    Datasheet: http://www.winbond.com/PDF/sheet/w83637hf.pdf
-
-Authors:
-        Frodo Looijaard <frodol@dds.nl>,
-        Philip Edelbrock <phil@netroedge.com>,
-        Mark Studebaker <mdsxyz123@yahoo.com>,
-        Bernhard C. Schrenk <clemy@clemy.org>
-
-Module Parameters
------------------
-
-* force_addr: int
-  Initialize the ISA address of the sensors
-* force_i2c: int
-  Initialize the I2C address of the sensors
-* init: int
-  (default is 1)
-  Use 'init=0' to bypass initializing the chip.
-  Try this if your computer crashes when you load the module.
-
-Description
------------
-
-This driver implements support for ISA accesses *only* for
-the Winbond W83627HF, W83627THF, W83697HF and W83637HF Super I/O chips.
-We will refer to them collectively as Winbond chips.
-
-This driver supports ISA accesses, which should be more reliable
-than i2c accesses. Also, for Tyan boards which contain both a
-Super I/O chip and a second i2c-only Winbond chip (often a W83782D),
-using this driver will avoid i2c address conflicts and complex
-initialization that were required in the w83781d driver.
-
-If you really want i2c accesses for these Super I/O chips,
-use the w83781d driver. However this is not the preferred method
-now that this ISA driver has been developed.
-
-Technically, the w83627thf does not support a VID reading. However, it's
-possible or even likely that your mainboard maker has routed these signals
-to a specific set of general purpose IO pins (the Asus P4C800-E is one such
-board). The w83627thf driver now interprets these as VID. If the VID on
-your board doesn't work, first see doc/vid in the lm_sensors package. If
-that still doesn't help, email us at lm-sensors@lm-sensors.org.
-
-For further information on this driver see the w83781d driver
-documentation.
-