[PATCH] I2C: Move hwmon drivers (3/3)

Part 3: Move the drivers documentation, plus two general documentation
files.

Note that the patch "adds trailing whitespace", because it does move the
files as-is, and some files happen to have trailing whitespace.

Signed-off-by: Jean Delvare <khali@linux-fr.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

1 files changed, 0 insertions, 52 deletions

diff --git a/Documentation/i2c/chips/smsc47m1 b/Documentation/i2c/chips/smsc47m1
deleted file mode 100644
index 34e6478c1425..000000000000
--- a/Documentation/i2c/chips/smsc47m1
+++ /dev/null
@@ -1,52 +0,0 @@
-Kernel driver smsc47m1
-======================
-
-Supported chips:
-  * SMSC LPC47B27x, LPC47M10x, LPC47M13x, LPC47M14x, LPC47M15x and LPC47M192
-    Addresses scanned: none, address read from Super I/O config space
-    Prefix: 'smsc47m1'
-    Datasheets:
-        http://www.smsc.com/main/datasheets/47b27x.pdf
-        http://www.smsc.com/main/datasheets/47m10x.pdf
-        http://www.smsc.com/main/tools/discontinued/47m13x.pdf
-        http://www.smsc.com/main/datasheets/47m14x.pdf
-        http://www.smsc.com/main/tools/discontinued/47m15x.pdf
-        http://www.smsc.com/main/datasheets/47m192.pdf
-
-Authors:
-        Mark D. Studebaker <mdsxyz123@yahoo.com>,
-        With assistance from Bruce Allen <ballen@uwm.edu>, and his
-        fan.c program: http://www.lsc-group.phys.uwm.edu/%7Eballen/driver/
-        Gabriele Gorla <gorlik@yahoo.com>,
-        Jean Delvare <khali@linux-fr.org>
-
-Description
------------
-
-The Standard Microsystems Corporation (SMSC) 47M1xx Super I/O chips
-contain monitoring and PWM control circuitry for two fans.
-
-The 47M15x and 47M192 chips contain a full 'hardware monitoring block'
-in addition to the fan monitoring and control. The hardware monitoring
-block is not supported by the driver.
-
-Fan rotation speeds are reported in RPM (rotations per minute). An alarm is
-triggered if the rotation speed has dropped below a programmable limit. Fan
-readings can be divided by a programmable divider (1, 2, 4 or 8) to give
-the readings more range or accuracy. Not all RPM values can accurately be
-represented, so some rounding is done. With a divider of 2, the lowest
-representable value is around 2600 RPM.
-
-PWM values are from 0 to 255.
-
-If an alarm triggers, it will remain triggered until the hardware register
-is read at least once. This means that the cause for the alarm may
-already have disappeared! Note that in the current implementation, all
-hardware registers are read whenever any data is read (unless it is less
-than 1.5 seconds since the last update). This means that you can easily
-miss once-only alarms.
-
-
-**********************
-The lm_sensors project gratefully acknowledges the support of
-Intel in the development of this driver.