aboutsummaryrefslogtreecommitdiffstats
path: root/Documentation/hwmon
diff options
context:
space:
mode:
authorDarrick J. Wong <djwong@us.ibm.com>2008-02-18 16:33:23 -0500
committerMark M. Hoffman <mhoffman@lightlink.com>2008-02-18 21:51:29 -0500
commit57df46d6d9ccd6ced95f169020f79ae637423087 (patch)
tree7ca14cba0e78cc8f35094e7cc9a8cbd7a715af19 /Documentation/hwmon
parentae770152c801f10a91e5e86597a39b5f9ccf2d0d (diff)
hwmon: New driver for Analog Devices ADT7473 sensor chip
This driver reports voltage, temperature and fan sensor readings on an ADT7473 chip. Signed-off-by: Darrick J. Wong <djwong@us.ibm.com> Signed-off-by: Mark M. Hoffman <mhoffman@lightlink.com>
Diffstat (limited to 'Documentation/hwmon')
-rw-r--r--Documentation/hwmon/adt747379
1 files changed, 79 insertions, 0 deletions
diff --git a/Documentation/hwmon/adt7473 b/Documentation/hwmon/adt7473
new file mode 100644
index 000000000000..22d8b19046ab
--- /dev/null
+++ b/Documentation/hwmon/adt7473
@@ -0,0 +1,79 @@
1Kernel driver adt7473
2======================
3
4Supported chips:
5 * Analog Devices ADT7473
6 Prefix: 'adt7473'
7 Addresses scanned: I2C 0x2C, 0x2D, 0x2E
8 Datasheet: Publicly available at the Analog Devices website
9
10Author: Darrick J. Wong
11
12Description
13-----------
14
15This driver implements support for the Analog Devices ADT7473 chip family.
16
17The LM85 uses the 2-wire interface compatible with the SMBUS 2.0
18specification. Using an analog to digital converter it measures three (3)
19temperatures and two (2) voltages. It has three (3) 16-bit counters for
20measuring fan speed. There are three (3) PWM outputs that can be used
21to control fan speed.
22
23A sophisticated control system for the PWM outputs is designed into the
24LM85 that allows fan speed to be adjusted automatically based on any of the
25three temperature sensors. Each PWM output is individually adjustable and
26programmable. Once configured, the ADT7473 will adjust the PWM outputs in
27response to the measured temperatures without further host intervention.
28This feature can also be disabled for manual control of the PWM's.
29
30Each of the measured inputs (voltage, temperature, fan speed) has
31corresponding high/low limit values. The ADT7473 will signal an ALARM if
32any measured value exceeds either limit.
33
34The ADT7473 samples all inputs continuously. The driver will not read
35the registers more often than once every other second. Further,
36configuration data is only read once per minute.
37
38Special Features
39----------------
40
41The ADT7473 have a 10-bit ADC and can therefore measure temperatures
42with 0.25 degC resolution. Temperature readings can be configured either
43for twos complement format or "Offset 64" format, wherein 63 is subtracted
44from the raw value to get the temperature value.
45
46The Analog Devices datasheet is very detailed and describes a procedure for
47determining an optimal configuration for the automatic PWM control.
48
49Hardware Configurations
50-----------------------
51
52The ADT7473 chips have an optional SMBALERT output that can be used to
53signal the chipset in case a limit is exceeded or the temperature sensors
54fail. Individual sensor interrupts can be masked so they won't trigger
55SMBALERT. The SMBALERT output if configured replaces the PWM2 function.
56
57Configuration Notes
58-------------------
59
60Besides standard interfaces driver adds the following:
61
62* PWM Control
63
64* pwm#_auto_point1_pwm and pwm#_auto_point1_temp and
65* pwm#_auto_point2_pwm and pwm#_auto_point2_temp -
66
67point1: Set the pwm speed at a lower temperature bound.
68point2: Set the pwm speed at a higher temperature bound.
69
70The ADT7473 will scale the pwm between the lower and higher pwm speed when
71the temperature is between the two temperature boundaries. PWM values range
72from 0 (off) to 255 (full speed).
73
74Notes
75-----
76
77The NVIDIA binary driver presents an ADT7473 chip via an on-card i2c bus.
78Unfortunately, they fail to set the i2c adapter class, so this driver may
79fail to find the chip until the nvidia driver is patched.