hwmon: (pmbus/lm25066) Report VAUX as vmon

So far the driver reported the voltage on VAUX as "vout2". This was not
entirely appropriate as it is not an output voltage, and complicates
the code. Use the new virtual "VMON" register set and report the voltage
as "vmon" instead.

Signed-off-by: Guenter Roeck <linux@roeck-us.net>

1 files changed, 8 insertions, 8 deletions

diff --git a/Documentation/hwmon/lm25066 b/Documentation/hwmon/lm25066
index 26025e419d35..2bc5ba6aee66 100644
--- a/Documentation/hwmon/lm25066
+++ b/Documentation/hwmon/lm25066
@@ -60,14 +60,14 @@ in1_max			Maximum input voltage.
 in1_min_alarm           Input voltage low alarm.
 in1_max_alarm           Input voltage high alarm.
 
-in2_label               "vout1"
-in2_input               Measured output voltage.
-in2_average             Average measured output voltage.
-in2_min                 Minimum output voltage.
-in2_min_alarm           Output voltage low alarm.
-
-in3_label               "vout2"
-in3_input               Measured voltage on vaux pin
+in2_label               "vmon"
+in2_input               Measured voltage on VAUX pin
+
+in3_label               "vout1"
+in3_input               Measured output voltage.
+in3_average             Average measured output voltage.
+in3_min                 Minimum output voltage.
+in3_min_alarm           Output voltage low alarm.
 
 curr1_label             "iin"
 curr1_input             Measured input current.