move frv docs one level up

My first guess for "fujitsu" was it might be related to the
fujitsu-laptop.c driver...

Move the frv directory one level up since frv is the name of the
architecture in the Linux kernel.

Signed-off-by: Adrian Bunk <bunk@kernel.org>

1 files changed, 262 insertions, 0 deletions

diff --git a/Documentation/frv/kernel-ABI.txt b/Documentation/frv/kernel-ABI.txt
new file mode 100644
index 000000000000..aaa1cec86f0b
--- /dev/null
+++ b/Documentation/frv/kernel-ABI.txt
@@ -0,0 +1,262 @@
+                        =================================
+                        INTERNAL KERNEL ABI FOR FR-V ARCH
+                        =================================
+
+The internal FRV kernel ABI is not quite the same as the userspace ABI. A
+number of the registers are used for special purposed, and the ABI is not
+consistent between modules vs core, and MMU vs no-MMU.
+
+This partly stems from the fact that FRV CPUs do not have a separate
+supervisor stack pointer, and most of them do not have any scratch
+registers, thus requiring at least one general purpose register to be
+clobbered in such an event. Also, within the kernel core, it is possible to
+simply jump or call directly between functions using a relative offset.
+This cannot be extended to modules for the displacement is likely to be too
+far. Thus in modules the address of a function to call must be calculated
+in a register and then used, requiring two extra instructions.
+
+This document has the following sections:
+
+ (*) System call register ABI
+ (*) CPU operating modes
+ (*) Internal kernel-mode register ABI
+ (*) Internal debug-mode register ABI
+ (*) Virtual interrupt handling
+
+
+========================
+SYSTEM CALL REGISTER ABI
+========================
+
+When a system call is made, the following registers are effective:
+
+        REGISTERS       CALL                    RETURN
+        =============== ======================= =======================
+        GR7             System call number      Preserved
+        GR8             Syscall arg #1          Return value
+        GR9-GR13        Syscall arg #2-6        Preserved
+
+
+===================
+CPU OPERATING MODES
+===================
+
+The FR-V CPU has three basic operating modes. In order of increasing
+capability:
+
+  (1) User mode.
+
+      Basic userspace running mode.
+
+  (2) Kernel mode.
+
+      Normal kernel mode. There are many additional control registers
+      available that may be accessed in this mode, in addition to all the
+      stuff available to user mode. This has two submodes:
+
+      (a) Exceptions enabled (PSR.T == 1).
+
+          Exceptions will invoke the appropriate normal kernel mode
+          handler. On entry to the handler, the PSR.T bit will be cleared.
+
+      (b) Exceptions disabled (PSR.T == 0).
+
+          No exceptions or interrupts may happen. Any mandatory exceptions
+          will cause the CPU to halt unless the CPU is told to jump into
+          debug mode instead.
+
+  (3) Debug mode.
+
+      No exceptions may happen in this mode. Memory protection and
+      management exceptions will be flagged for later consideration, but
+      the exception handler won't be invoked. Debugging traps such as
+      hardware breakpoints and watchpoints will be ignored. This mode is
+      entered only by debugging events obtained from the other two modes.
+
+      All kernel mode registers may be accessed, plus a few extra debugging
+      specific registers.
+
+
+=================================
+INTERNAL KERNEL-MODE REGISTER ABI
+=================================
+
+There are a number of permanent register assignments that are set up by
+entry.S in the exception prologue. Note that there is a complete set of
+exception prologues for each of user->kernel transition and kernel->kernel
+transition. There are also user->debug and kernel->debug mode transition
+prologues.
+
+
+        REGISTER        FLAVOUR USE
+        =============== ======= ==============================================
+        GR1                     Supervisor stack pointer
+        GR15                    Current thread info pointer
+        GR16                    GP-Rel base register for small data
+        GR28                    Current exception frame pointer (__frame)
+        GR29                    Current task pointer (current)
+        GR30                    Destroyed by kernel mode entry
+        GR31            NOMMU   Destroyed by debug mode entry
+        GR31            MMU     Destroyed by TLB miss kernel mode entry
+        CCR.ICC2                Virtual interrupt disablement tracking
+        CCCR.CC3                Cleared by exception prologue 
+                                (atomic op emulation)
+        SCR0            MMU     See mmu-layout.txt.
+        SCR1            MMU     See mmu-layout.txt.
+        SCR2            MMU     Save for EAR0 (destroyed by icache insns 
+                                               in debug mode)
+        SCR3            MMU     Save for GR31 during debug exceptions
+        DAMR/IAMR       NOMMU   Fixed memory protection layout.
+        DAMR/IAMR       MMU     See mmu-layout.txt.
+
+
+Certain registers are also used or modified across function calls:
+
+        REGISTER        CALL                            RETURN
+        =============== =============================== ======================
+        GR0             Fixed Zero                      -
+        GR2             Function call frame pointer
+        GR3             Special                         Preserved
+        GR3-GR7         -                               Clobbered
+        GR8             Function call arg #1            Return value 
+                                                        (or clobbered)
+        GR9             Function call arg #2            Return value MSW 
+                                                        (or clobbered)
+        GR10-GR13       Function call arg #3-#6         Clobbered
+        GR14            -                               Clobbered
+        GR15-GR16       Special                         Preserved
+        GR17-GR27       -                               Preserved
+        GR28-GR31       Special                         Only accessed 
+                                                        explicitly
+        LR              Return address after CALL       Clobbered
+        CCR/CCCR        -                               Mostly Clobbered
+
+
+================================
+INTERNAL DEBUG-MODE REGISTER ABI
+================================
+
+This is the same as the kernel-mode register ABI for functions calls. The
+difference is that in debug-mode there's a different stack and a different
+exception frame. Almost all the global registers from kernel-mode
+(including the stack pointer) may be changed.
+
+        REGISTER        FLAVOUR USE
+        =============== ======= ==============================================
+        GR1                     Debug stack pointer
+        GR16                    GP-Rel base register for small data
+        GR31                    Current debug exception frame pointer 
+                                (__debug_frame)
+        SCR3            MMU     Saved value of GR31
+
+
+Note that debug mode is able to interfere with the kernel's emulated atomic
+ops, so it must be exceedingly careful not to do any that would interact
+with the main kernel in this regard. Hence the debug mode code (gdbstub) is
+almost completely self-contained. The only external code used is the
+sprintf family of functions.
+
+Furthermore, break.S is so complicated because single-step mode does not
+switch off on entry to an exception. That means unless manually disabled,
+single-stepping will blithely go on stepping into things like interrupts.
+See gdbstub.txt for more information.
+
+
+==========================
+VIRTUAL INTERRUPT HANDLING
+==========================
+
+Because accesses to the PSR is so slow, and to disable interrupts we have
+to access it twice (once to read and once to write), we don't actually
+disable interrupts at all if we don't have to. What we do instead is use
+the ICC2 condition code flags to note virtual disablement, such that if we
+then do take an interrupt, we note the flag, really disable interrupts, set
+another flag and resume execution at the point the interrupt happened.
+Setting condition flags as a side effect of an arithmetic or logical
+instruction is really fast. This use of the ICC2 only occurs within the
+kernel - it does not affect userspace.
+
+The flags we use are:
+
+ (*) CCR.ICC2.Z [Zero flag]
+
+     Set to virtually disable interrupts, clear when interrupts are
+     virtually enabled. Can be modified by logical instructions without
+     affecting the Carry flag.
+
+ (*) CCR.ICC2.C [Carry flag]
+
+     Clear to indicate hardware interrupts are really disabled, set otherwise.
+
+
+What happens is this:
+
+ (1) Normal kernel-mode operation.
+
+        ICC2.Z is 0, ICC2.C is 1.
+
+ (2) An interrupt occurs. The exception prologue examines ICC2.Z and
+     determines that nothing needs doing. This is done simply with an
+     unlikely BEQ instruction.
+
+ (3) The interrupts are disabled (local_irq_disable)
+
+        ICC2.Z is set to 1.
+
+ (4) If interrupts were then re-enabled (local_irq_enable):
+
+        ICC2.Z would be set to 0.
+
+     A TIHI #2 instruction (trap #2 if condition HI - Z==0 && C==0) would
+     be used to trap if interrupts were now virtually enabled, but
+     physically disabled - which they're not, so the trap isn't taken. The
+     kernel would then be back to state (1).
+
+ (5) An interrupt occurs. The exception prologue examines ICC2.Z and
+     determines that the interrupt shouldn't actually have happened. It
+     jumps aside, and there disabled interrupts by setting PSR.PIL to 14
+     and then it clears ICC2.C.
+
+ (6) If interrupts were then saved and disabled again (local_irq_save):
+
+        ICC2.Z would be shifted into the save variable and masked off 
+        (giving a 1).
+
+        ICC2.Z would then be set to 1 (thus unchanged), and ICC2.C would be
+        unaffected (ie: 0).
+
+ (7) If interrupts were then restored from state (6) (local_irq_restore):
+
+        ICC2.Z would be set to indicate the result of XOR'ing the saved
+        value (ie: 1) with 1, which gives a result of 0 - thus leaving
+        ICC2.Z set.
+
+        ICC2.C would remain unaffected (ie: 0).
+
+     A TIHI #2 instruction would be used to again assay the current state,
+     but this would do nothing as Z==1.
+
+ (8) If interrupts were then enabled (local_irq_enable):
+
+        ICC2.Z would be cleared. ICC2.C would be left unaffected. Both
+        flags would now be 0.
+
+     A TIHI #2 instruction again issued to assay the current state would
+     then trap as both Z==0 [interrupts virtually enabled] and C==0
+     [interrupts really disabled] would then be true.
+
+ (9) The trap #2 handler would simply enable hardware interrupts 
+     (set PSR.PIL to 0), set ICC2.C to 1 and return.
+
+(10) Immediately upon returning, the pending interrupt would be taken.
+
+(11) The interrupt handler would take the path of actually processing the
+     interrupt (ICC2.Z is clear, BEQ fails as per step (2)).
+
+(12) The interrupt handler would then set ICC2.C to 1 since hardware
+     interrupts are definitely enabled - or else the kernel wouldn't be here.
+
+(13) On return from the interrupt handler, things would be back to state (1).
+
+This trap (#2) is only available in kernel mode. In user mode it will
+result in SIGILL.