Documentation/: it's -> its where appropriate

Fix obvious cases of "it's" being used when "its" was meant.

Signed-off-by: Francis Galiegue <fgaliegue@gmail.com>
Acked-by: Randy Dunlap <rdunlap@xenotime.net>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>

10 files changed, 17 insertions, 17 deletions

diff --git a/Documentation/filesystems/autofs4-mount-control.txt b/Documentation/filesystems/autofs4-mount-control.txt
index 8f78ded4b648..51986bf08a4d 100644
--- a/Documentation/filesystems/autofs4-mount-control.txt
+++ b/Documentation/filesystems/autofs4-mount-control.txt
@@ -146,7 +146,7 @@ found to be inadequate, in this case. The Generic Netlink system was
 used for this as raw Netlink would lead to a significant increase in
 complexity. There's no question that the Generic Netlink system is an
 elegant solution for common case ioctl functions but it's not a complete
-replacement probably because it's primary purpose in life is to be a
+replacement probably because its primary purpose in life is to be a
 message bus implementation rather than specifically an ioctl replacement.
 While it would be possible to work around this there is one concern
 that lead to the decision to not use it. This is that the autofs
diff --git a/Documentation/filesystems/ceph.txt b/Documentation/filesystems/ceph.txt
index 0660c9f5deef..763d8ebbbebd 100644
--- a/Documentation/filesystems/ceph.txt
+++ b/Documentation/filesystems/ceph.txt
@@ -90,7 +90,7 @@ Mount Options
         Specify the IP and/or port the client should bind to locally.
         There is normally not much reason to do this.  If the IP is not
         specified, the client's IP address is determined by looking at the
-        address it's connection to the monitor originates from.
+        address its connection to the monitor originates from.
 
   wsize=X
         Specify the maximum write size in bytes.  By default there is no
diff --git a/Documentation/filesystems/dlmfs.txt b/Documentation/filesystems/dlmfs.txt
index c50bbb2d52b4..1b528b2ad809 100644
--- a/Documentation/filesystems/dlmfs.txt
+++ b/Documentation/filesystems/dlmfs.txt
@@ -47,7 +47,7 @@ You'll want to start heartbeating on a volume which all the nodes in
 your lockspace can access. The easiest way to do this is via
 ocfs2_hb_ctl (distributed with ocfs2-tools). Right now it requires
 that an OCFS2 file system be in place so that it can automatically
-find it's heartbeat area, though it will eventually support heartbeat
+find its heartbeat area, though it will eventually support heartbeat
 against raw disks.
 
 Please see the ocfs2_hb_ctl and mkfs.ocfs2 manual pages distributed
diff --git a/Documentation/filesystems/fiemap.txt b/Documentation/filesystems/fiemap.txt
index 606233cd4618..1b805a0efbb0 100644
--- a/Documentation/filesystems/fiemap.txt
+++ b/Documentation/filesystems/fiemap.txt
@@ -38,7 +38,7 @@ flags, it will return EBADR and the contents of fm_flags will contain
 the set of flags which caused the error. If the kernel is compatible
 with all flags passed, the contents of fm_flags will be unmodified.
 It is up to userspace to determine whether rejection of a particular
-flag is fatal to it's operation. This scheme is intended to allow the
+flag is fatal to its operation. This scheme is intended to allow the
 fiemap interface to grow in the future but without losing
 compatibility with old software.
 
@@ -56,7 +56,7 @@ If this flag is set, the kernel will sync the file before mapping extents.
 
 * FIEMAP_FLAG_XATTR
 If this flag is set, the extents returned will describe the inodes
-extended attribute lookup tree, instead of it's data tree.
+extended attribute lookup tree, instead of its data tree.
 
 
 Extent Mapping
@@ -89,7 +89,7 @@ struct fiemap_extent {
 };
 
 All offsets and lengths are in bytes and mirror those on disk.  It is valid
-for an extents logical offset to start before the request or it's logical
+for an extents logical offset to start before the request or its logical
 length to extend past the request.  Unless FIEMAP_EXTENT_NOT_ALIGNED is
 returned, fe_logical, fe_physical, and fe_length will be aligned to the
 block size of the file system.  With the exception of extents flagged as
@@ -125,7 +125,7 @@ been allocated for the file yet.
 
 * FIEMAP_EXTENT_DELALLOC
   - This will also set FIEMAP_EXTENT_UNKNOWN.
-Delayed allocation - while there is data for this extent, it's
+Delayed allocation - while there is data for this extent, its
 physical location has not been allocated yet.
 
 * FIEMAP_EXTENT_ENCODED
@@ -159,7 +159,7 @@ Data is located within a meta data block.
 Data is packed into a block with data from other files.
 
 * FIEMAP_EXTENT_UNWRITTEN
-Unwritten extent - the extent is allocated but it's data has not been
+Unwritten extent - the extent is allocated but its data has not been
 initialized.  This indicates the extent's data will be all zero if read
 through the filesystem but the contents are undefined if read directly from
 the device.
@@ -176,7 +176,7 @@ VFS -> File System Implementation
 
 File systems wishing to support fiemap must implement a ->fiemap callback on
 their inode_operations structure. The fs ->fiemap call is responsible for
-defining it's set of supported fiemap flags, and calling a helper function on
+defining its set of supported fiemap flags, and calling a helper function on
 each discovered extent:
 
 struct inode_operations {
diff --git a/Documentation/filesystems/fuse.txt b/Documentation/filesystems/fuse.txt
index 397a41adb4c3..13af4a49e7db 100644
--- a/Documentation/filesystems/fuse.txt
+++ b/Documentation/filesystems/fuse.txt
@@ -91,7 +91,7 @@ Mount options
 'default_permissions'
 
   By default FUSE doesn't check file access permissions, the
-  filesystem is free to implement it's access policy or leave it to
+  filesystem is free to implement its access policy or leave it to
   the underlying file access mechanism (e.g. in case of network
   filesystems).  This option enables permission checking, restricting
   access based on file mode.  It is usually useful together with the
@@ -171,7 +171,7 @@ or may honor them by sending a reply to the _original_ request, with
 the error set to EINTR.
 
 It is also possible that there's a race between processing the
-original request and it's INTERRUPT request.  There are two possibilities:
+original request and its INTERRUPT request.  There are two possibilities:
 
   1) The INTERRUPT request is processed before the original request is
      processed
diff --git a/Documentation/filesystems/hpfs.txt b/Documentation/filesystems/hpfs.txt
index fa45c3baed98..74630bd504fb 100644
--- a/Documentation/filesystems/hpfs.txt
+++ b/Documentation/filesystems/hpfs.txt
@@ -103,7 +103,7 @@ to analyze or change OS2SYS.INI.
 Codepages
 
 HPFS can contain several uppercasing tables for several codepages and each
-file has a pointer to codepage it's name is in. However OS/2 was created in
+file has a pointer to codepage its name is in. However OS/2 was created in
 America where people don't care much about codepages and so multiple codepages
 support is quite buggy. I have Czech OS/2 working in codepage 852 on my disk.
 Once I booted English OS/2 working in cp 850 and I created a file on my 852
diff --git a/Documentation/filesystems/nfs/rpc-cache.txt b/Documentation/filesystems/nfs/rpc-cache.txt
index 8a382bea6808..ebcaaee21616 100644
--- a/Documentation/filesystems/nfs/rpc-cache.txt
+++ b/Documentation/filesystems/nfs/rpc-cache.txt
@@ -185,7 +185,7 @@ failed lookup meant a definite 'no'.
 request/response format
 -----------------------
 
-While each cache is free to use it's own format for requests
+While each cache is free to use its own format for requests
 and responses over channel, the following is recommended as
 appropriate and support routines are available to help:
 Each request or response record should be printable ASCII
diff --git a/Documentation/filesystems/proc.txt b/Documentation/filesystems/proc.txt
index 770700317c2c..f6b1b5fca1df 100644
--- a/Documentation/filesystems/proc.txt
+++ b/Documentation/filesystems/proc.txt
@@ -965,7 +965,7 @@ your system and how much traffic was routed over those devices:
   ...] 1375103    17405    0    0    0     0       0          0 
   ...] 1703981     5535    0    0    0     3       0          0 
 
-In addition, each Channel Bond interface has it's own directory.  For
+In addition, each Channel Bond interface has its own directory.  For
 example, the bond0 device will have a directory called /proc/net/bond0/.
 It will contain information that is specific to that bond, such as the
 current slaves of the bond, the link status of the slaves, and how
@@ -1362,7 +1362,7 @@ been accounted as having caused 1MB of write.
 In other words: The number of bytes which this process caused to not happen,
 by truncating pagecache. A task can cause "negative" IO too. If this task
 truncates some dirty pagecache, some IO which another task has been accounted
-for (in it's write_bytes) will not be happening. We _could_ just subtract that
+for (in its write_bytes) will not be happening. We _could_ just subtract that
 from the truncating task's write_bytes, but there is information loss in doing
 that.
 
diff --git a/Documentation/filesystems/smbfs.txt b/Documentation/filesystems/smbfs.txt
index f673ef0de0f7..194fb0decd2c 100644
--- a/Documentation/filesystems/smbfs.txt
+++ b/Documentation/filesystems/smbfs.txt
@@ -3,6 +3,6 @@ protocol used by Windows for Workgroups, Windows 95 and Windows NT.
 Smbfs was inspired by Samba, the program written by Andrew Tridgell
 that turns any Unix host into a file server for DOS or Windows clients.
 
-Smbfs is a SMB client, but uses parts of samba for it's operation. For
+Smbfs is a SMB client, but uses parts of samba for its operation. For
 more info on samba, including documentation, please go to
 http://www.samba.org/ and then on to your nearest mirror.
diff --git a/Documentation/filesystems/vfs.txt b/Documentation/filesystems/vfs.txt
index 3de2f32edd90..b66858538df5 100644
--- a/Documentation/filesystems/vfs.txt
+++ b/Documentation/filesystems/vfs.txt
@@ -72,7 +72,7 @@ structure (this is the kernel-side implementation of file
 descriptors). The freshly allocated file structure is initialized with
 a pointer to the dentry and a set of file operation member functions.
 These are taken from the inode data. The open() file method is then
-called so the specific filesystem implementation can do it's work. You
+called so the specific filesystem implementation can do its work. You
 can see that this is another switch performed by the VFS. The file
 structure is placed into the file descriptor table for the process.