Linux-2.6.12-rc2v2.6.12-rc2

Initial git repository build. I'm not bothering with the full history,
even though we have it. We can create a separate "historical" git
archive of that later if we want to, and in the meantime it's about
3.2GB when imported into git - space that would just make the early
git days unnecessarily complicated, when we don't have a lot of good
infrastructure for it.

Let it rip!

1 files changed, 285 insertions, 0 deletions

diff --git a/Documentation/dvb/README.dibusb b/Documentation/dvb/README.dibusb
new file mode 100644
index 000000000000..7a9e958513f3
--- /dev/null
+++ b/Documentation/dvb/README.dibusb
@@ -0,0 +1,285 @@
+Documentation for dib3000* frontend drivers and dibusb device driver
+====================================================================
+
+Copyright (C) 2004-5 Patrick Boettcher (patrick.boettcher@desy.de),
+
+dibusb and dib3000mb/mc drivers based on GPL code, which has
+
+Copyright (C) 2004 Amaury Demol for DiBcom (ademol@dibcom.fr)
+
+This program is free software; you can redistribute it and/or
+modify it under the terms of the GNU General Public License as
+published by the Free Software Foundation, version 2.
+
+
+Supported devices USB1.1
+========================
+
+Produced and reselled by Twinhan:
+---------------------------------
+- TwinhanDTV USB-Ter DVB-T Device (VP7041)
+        http://www.twinhan.com/product_terrestrial_3.asp
+
+- TwinhanDTV Magic Box (VP7041e)
+        http://www.twinhan.com/product_terrestrial_4.asp
+
+- HAMA DVB-T USB device
+        http://www.hama.de/portal/articleId*110620/action*2598
+
+- CTS Portable (Chinese Television System) (2)
+        http://www.2cts.tv/ctsportable/
+
+- Unknown USB DVB-T device with vendor ID Hyper-Paltek
+
+
+Produced and reselled by KWorld:
+--------------------------------
+- KWorld V-Stream XPERT DTV DVB-T USB
+        http://www.kworld.com.tw/en/product/DVBT-USB/DVBT-USB.html
+
+- JetWay DTV DVB-T USB
+        http://www.jetway.com.tw/evisn/product/lcd-tv/DVT-USB/dtv-usb.htm
+
+- ADSTech Instant TV DVB-T USB
+        http://www.adstech.com/products/PTV-333/intro/PTV-333_intro.asp?pid=PTV-333
+
+
+Others:
+-------
+- Ultima Electronic/Artec T1 USB TVBOX (AN2135, AN2235, AN2235 with Panasonic Tuner)
+        http://82.161.246.249/products-tvbox.html
+
+- Compro Videomate DVB-U2000 - DVB-T USB (2)
+        http://www.comprousa.com/products/vmu2000.htm
+
+- Grandtec USB DVB-T
+        http://www.grand.com.tw/
+
+- Avermedia AverTV DVBT USB (2)
+        http://www.avermedia.com/
+
+- DiBcom USB DVB-T reference device (non-public)
+
+
+Supported devices USB2.0
+========================
+- Twinhan MagicBox II (2)
+        http://www.twinhan.com/product_terrestrial_7.asp
+
+- Hanftek UMT-010 (1)
+        http://www.globalsources.com/si/6008819757082/ProductDetail/Digital-TV/product_id-100046529
+
+- Typhoon/Yakumo/HAMA DVB-T mobile USB2.0 (1)
+        http://www.yakumo.de/produkte/index.php?pid=1&ag=DVB-T
+
+- Artec T1 USB TVBOX (FX2) (2)
+
+- Hauppauge WinTV NOVA-T USB2
+        http://www.hauppauge.com/
+
+- KWorld/ADSTech Instant DVB-T USB2.0 (DiB3000M-B)
+
+- DiBcom USB2.0 DVB-T reference device (non-public)
+
+1) It is working almost.
+2) No test reports received yet.
+
+
+0. NEWS:
+  2005-02-11 - added support for the KWorld/ADSTech Instant DVB-T USB2.0. Thanks a lot to Joachim von Caron
+  2005-02-02 - added support for the Hauppauge Win-TV Nova-T USB2
+  2005-01-31 - distorted streaming is finally gone for USB1.1 devices
+  2005-01-13 - moved the mirrored pid_filter_table back to dvb-dibusb
+             - first almost working version for HanfTek UMT-010
+             - found out, that Yakumo/HAMA/Typhoon are predessors of the HanfTek UMT-010
+  2005-01-10 - refactoring completed, now everything is very delightful
+             - tuner quirks for some weird devices (Artec T1 AN2235 device has sometimes a
+               Panasonic Tuner assembled). Tunerprobing implemented. Thanks a lot to Gunnar Wittich.
+  2004-12-29 - after several days of struggling around bug of no returning URBs fixed.
+  2004-12-26 - refactored the dibusb-driver, splitted into separate files
+             - i2c-probing enabled
+  2004-12-06 - possibility for demod i2c-address probing
+             - new usb IDs (Compro,Artec)
+  2004-11-23 - merged changes from DiB3000MC_ver2.1
+             - revised the debugging
+             - possibility to deliver the complete TS for USB2.0
+  2004-11-21 - first working version of the dib3000mc/p frontend driver.
+  2004-11-12 - added additional remote control keys. Thanks to Uwe Hanke.
+  2004-11-07 - added remote control support. Thanks to David Matthews.
+  2004-11-05 - added support for a new devices (Grandtec/Avermedia/Artec)
+             - merged my changes (for dib3000mb/dibusb) to the FE_REFACTORING, because it became HEAD
+             - moved transfer control (pid filter, fifo control) from usb driver to frontend, it seems
+               better settled there (added xfer_ops-struct)
+             - created a common files for frontends (mc/p/mb)
+  2004-09-28 - added support for a new device (Unkown, vendor ID is Hyper-Paltek)
+  2004-09-20 - added support for a new device (Compro DVB-U2000), thanks
+               to Amaury Demol for reporting
+             - changed usb TS transfer method (several urbs, stopping transfer
+               before setting a new pid)
+  2004-09-13 - added support for a new device (Artec T1 USB TVBOX), thanks
+               to Christian Motschke for reporting
+  2004-09-05 - released the dibusb device and dib3000mb-frontend driver
+
+  (old news for vp7041.c)
+  2004-07-15 - found out, by accident, that the device has a TUA6010XS for
+               PLL
+  2004-07-12 - figured out, that the driver should also work with the
+               CTS Portable (Chinese Television System)
+  2004-07-08 - firmware-extraction-2.422-problem solved, driver is now working
+               properly with firmware extracted from 2.422
+                         - #if for 2.6.4 (dvb), compile issue
+                         - changed firmware handling, see vp7041.txt sec 1.1
+  2004-07-02 - some tuner modifications, v0.1, cleanups, first public
+  2004-06-28 - now using the dvb_dmx_swfilter_packets, everything
+               runs fine now
+  2004-06-27 - able to watch and switching channels (pre-alpha)
+             - no section filtering yet
+  2004-06-06 - first TS received, but kernel oops :/
+  2004-05-14 - firmware loader is working
+  2004-05-11 - start writing the driver
+
+1. How to use?
+NOTE: This driver was developed using Linux 2.6.6.,
+it is working with 2.6.7 and above.
+
+Linux 2.4.x support is not planned, but patches are very welcome.
+
+NOTE: I'm using Debian testing, so the following explaination (especially
+the hotplug-path) needn't match your system, but probably it will :).
+
+The driver is included in the kernel since Linux 2.6.10.
+
+1.1. Firmware
+
+The USB driver needs to download a firmware to start working.
+
+You can either use "get_dvb_firmware dibusb" to download the firmware or you
+can get it directly via
+
+for USB1.1 (AN2135)
+http://www.linuxtv.org/downloads/firmware/dvb-dibusb-5.0.0.11.fw
+
+for USB1.1 (AN2235) (a few Artec T1 devices)
+http://www.linuxtv.org/downloads/firmware/dvb-dibusb-an2235-1.fw
+
+for USB2.0 (FX2) Hauppauge, DiBcom
+http://www.linuxtv.org/downloads/firmware/dvb-dibusb-6.0.0.5.fw
+
+for USB2.0 ADSTech/Kworld USB2.0
+http://www.linuxtv.org/downloads/firmware/dvb-dibusb-adstech-usb2-1.fw
+
+for USB2.0 HanfTek
+http://www.linuxtv.org/downloads/firmware/dvb-dibusb-an2235-1.fw
+
+
+1.2. Compiling
+
+Since the driver is in the linux kernel, activating the driver in
+your favorite config-environment should sufficient. I recommend
+to compile the driver as module. Hotplug does the rest.
+
+1.3. Loading the drivers
+
+Hotplug is able to load the driver, when it is needed (because you plugged
+in the device).
+
+If you want to enable debug output, you have to load the driver manually and
+from withing the dvb-kernel cvs repository.
+
+first have a look, which debug level are available:
+
+modinfo dib3000mb
+modinfo dib3000-common
+modinfo dib3000mc
+modinfo dvb-dibusb
+
+modprobe dib3000-common debug=<level>
+modprobe dib3000mb debug=<level>
+modprobe dib3000mc debug=<level>
+modprobe dvb-dibusb debug=<level>
+
+should do the trick.
+
+When the driver is loaded successfully, the firmware file was in
+the right place and the device is connected, the "Power"-LED should be
+turned on.
+
+At this point you should be able to start a dvb-capable application. For myself
+I used mplayer, dvbscan, tzap and kaxtv, they are working. Using the device
+in vdr is working now also.
+
+2. Known problems and bugs
+
+- Don't remove the USB device while running an DVB application, your system will die.
+
+2.1. Adding support for devices
+
+It is not possible to determine the range of devices based on the DiBcom
+reference designs. This is because the reference design of DiBcom can be sold
+to thirds, without telling DiBcom (so done with the Twinhan VP7041 and
+the HAMA device).
+
+When you think you have a device like this and the driver does not recognizes it,
+please send the ****load*.inf and the ****cap*.inf of the Windows driver to me.
+
+Sometimes the Vendor or Product ID is identical to the ones of Twinhan, even
+though it is not a Twinhan device (e.g. HAMA), then please send me the name
+of the device. I will add it to this list in order to make this clear to
+others.
+
+If you are familar with C you can also add the VID and PID of the device to
+the dvb-dibusb-core.c-file and create a patch and send it over to me or to
+the linux-dvb mailing list, _after_ you have tried compiling and modprobing
+it.
+
+2.2. USB1.1 Bandwidth limitation
+
+Most of the currently supported devices are USB1.1 and thus they have a
+maximum bandwidth of about 5-6 MBit/s when connected to a USB2.0 hub.
+This is not enough for receiving the complete transport stream of a
+DVB-T channel (which can be about 16 MBit/s). Normally this is not a
+problem, if you only want to watch TV (this does not apply for HDTV),
+but watching a channel while recording another channel on the same
+frequency simply does not work very well. This applies to all USB1.1
+DVB-T devices, not just dibusb)
+
+Update: For the USB1.1 and VDR some work has been done (patches and comments
+are still very welcome). Maybe the problem is solved in the meantime because I
+now use the dmx_sw_filter function instead of dmx_sw_filter_packet. I hope the
+linux-dvb software filter is able to get the best of the garbled TS.
+
+The bug, where the TS is distorted by a heavy usage of the device is gone
+definitely. All dibusb-devices I was using (Twinhan, Kworld, DiBcom) are
+working like charm now with VDR. Sometimes I even was able to record a channel
+and watch another one.
+
+2.3. Comments
+
+Patches, comments and suggestions are very very welcome.
+
+3. Acknowledgements
+        Amaury Demol (ademol@dibcom.fr) and Francois Kanounnikoff from DiBcom for
+    providing specs, code and help, on which the dvb-dibusb, dib3000mb and
+    dib3000mc are based.
+
+   David Matthews for identifying a new device type (Artec T1 with AN2235)
+    and for extending dibusb with remote control event handling. Thank you.
+
+   Alex Woods for frequently answering question about usb and dvb
+    stuff, a big thank you.
+
+   Bernd Wagner for helping with huge bug reports and discussions.
+
+   Gunnar Wittich and Joachim von Caron for their trust for giving me
+    root-shells on their machines to implement support for new devices.
+
+   Some guys on the linux-dvb mailing list for encouraging me
+
+   Peter Schildmann >peter.schildmann-nospam-at-web.de< for his
+    user-level firmware loader, which saves a lot of time
+    (when writing the vp7041 driver)
+
+   Ulf Hermenau for helping me out with traditional chinese.
+
+   André Smoktun and Christian Frömmel for supporting me with
+    hardware and listening to my problems very patient