Merge tag 'tegra-for-3.14-dmas-resets-rework' into drm/for-next

ARM: tegra: implement common DMA and resets DT bindings

This series converts the Tegra DTs and drivers to use the common/
standard DMA and reset bindings, rather than custom bindings. It also
adds complete documentation for the Tegra clock bindings without
actually changing any binding definitions.

This conversion relies on a few sets of patches in branches from outside
the Tegra tree:

1) A patch to add an DMA channel request API which allows deferred probe
   to be implemented.

2) A patch to implement a common part of the of_xlate function for DMA
   controllers.

3) Some ASoC patches (which in turn rely on (1) above), which support
   deferred probe during DMA channel allocation.

4) The Tegra clock driver changes for 3.14.

Consequently, this branch is based on a merge of all of those external
branches.

In turn, this branch is or will be pulled into a few places that either
rely on features introduced here, or would otherwise conflict with the
patches:

a) Tegra's own for-3.14/powergate and for-4.14/dt branches, to avoid
   conflicts.

b) The DRM tree, which introduces new code that relies on the reset
   controller framework introduced in this branch, and to avoid
   conflicts.

30 files changed, 483 insertions, 68 deletions

diff --git a/Documentation/devicetree/bindings/arm/tegra/nvidia,tegra20-pmc.txt b/Documentation/devicetree/bindings/arm/tegra/nvidia,tegra20-pmc.txt
index 1608a54e90e1..68ac65f82a1c 100644
--- a/Documentation/devicetree/bindings/arm/tegra/nvidia,tegra20-pmc.txt
+++ b/Documentation/devicetree/bindings/arm/tegra/nvidia,tegra20-pmc.txt
@@ -9,6 +9,7 @@ Required properties:
 - compatible : Should contain "nvidia,tegra<chip>-pmc".
 - reg : Offset and length of the register set for the device
 - clocks : Must contain an entry for each entry in clock-names.
+  See ../clocks/clock-bindings.txt for details.
 - clock-names : Must include the following entries:
   "pclk" (The Tegra clock of that name),
   "clk32k_in" (The 32KHz clock input to Tegra).
diff --git a/Documentation/devicetree/bindings/clock/nvidia,tegra114-car.txt b/Documentation/devicetree/bindings/clock/nvidia,tegra114-car.txt
index 0c80c2677104..9acea9d93160 100644
--- a/Documentation/devicetree/bindings/clock/nvidia,tegra114-car.txt
+++ b/Documentation/devicetree/bindings/clock/nvidia,tegra114-car.txt
@@ -15,6 +15,9 @@ Required properties :
   In clock consumers, this cell represents the clock ID exposed by the
   CAR. The assignments may be found in header file
   <dt-bindings/clock/tegra114-car.h>.
+- #reset-cells : Should be 1.
+  In clock consumers, this cell represents the bit number in the CAR's
+  array of CLK_RST_CONTROLLER_RST_DEVICES_* registers.
 
 Example SoC include file:
 
@@ -23,6 +26,7 @@ Example SoC include file:
                 compatible = "nvidia,tegra114-car";
                 reg = <0x60006000 0x1000>;
                 #clock-cells = <1>;
+                #reset-cells = <1>;
         };
 
         usb@c5004000 {
diff --git a/Documentation/devicetree/bindings/clock/nvidia,tegra124-car.txt b/Documentation/devicetree/bindings/clock/nvidia,tegra124-car.txt
new file mode 100644
index 000000000000..ded5d6212c84
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/nvidia,tegra124-car.txt
@@ -0,0 +1,63 @@
+NVIDIA Tegra124 Clock And Reset Controller
+
+This binding uses the common clock binding:
+Documentation/devicetree/bindings/clock/clock-bindings.txt
+
+The CAR (Clock And Reset) Controller on Tegra is the HW module responsible
+for muxing and gating Tegra's clocks, and setting their rates.
+
+Required properties :
+- compatible : Should be "nvidia,tegra124-car"
+- reg : Should contain CAR registers location and length
+- clocks : Should contain phandle and clock specifiers for two clocks:
+  the 32 KHz "32k_in", and the board-specific oscillator "osc".
+- #clock-cells : Should be 1.
+  In clock consumers, this cell represents the clock ID exposed by the
+  CAR. The assignments may be found in header file
+  <dt-bindings/clock/tegra124-car.h>.
+- #reset-cells : Should be 1.
+  In clock consumers, this cell represents the bit number in the CAR's
+  array of CLK_RST_CONTROLLER_RST_DEVICES_* registers.
+
+Example SoC include file:
+
+/ {
+        tegra_car: clock {
+                compatible = "nvidia,tegra124-car";
+                reg = <0x60006000 0x1000>;
+                #clock-cells = <1>;
+                #reset-cells = <1>;
+        };
+
+        usb@c5004000 {
+                clocks = <&tegra_car TEGRA124_CLK_USB2>;
+        };
+};
+
+Example board file:
+
+/ {
+        clocks {
+                compatible = "simple-bus";
+                #address-cells = <1>;
+                #size-cells = <0>;
+
+                osc: clock@0 {
+                        compatible = "fixed-clock";
+                        reg = <0>;
+                        #clock-cells = <0>;
+                        clock-frequency = <112400000>;
+                };
+
+                clk_32k: clock@1 {
+                        compatible = "fixed-clock";
+                        reg = <1>;
+                        #clock-cells = <0>;
+                        clock-frequency = <32768>;
+                };
+        };
+
+        &tegra_car {
+                clocks = <&clk_32k> <&osc>;
+        };
+};
diff --git a/Documentation/devicetree/bindings/clock/nvidia,tegra20-car.txt b/Documentation/devicetree/bindings/clock/nvidia,tegra20-car.txt
index fcfed5bf73fb..6c5901b503d0 100644
--- a/Documentation/devicetree/bindings/clock/nvidia,tegra20-car.txt
+++ b/Documentation/devicetree/bindings/clock/nvidia,tegra20-car.txt
@@ -15,6 +15,9 @@ Required properties :
   In clock consumers, this cell represents the clock ID exposed by the
   CAR. The assignments may be found in header file
   <dt-bindings/clock/tegra20-car.h>.
+- #reset-cells : Should be 1.
+  In clock consumers, this cell represents the bit number in the CAR's
+  array of CLK_RST_CONTROLLER_RST_DEVICES_* registers.
 
 Example SoC include file:
 
@@ -23,6 +26,7 @@ Example SoC include file:
                 compatible = "nvidia,tegra20-car";
                 reg = <0x60006000 0x1000>;
                 #clock-cells = <1>;
+                #reset-cells = <1>;
         };
 
         usb@c5004000 {
diff --git a/Documentation/devicetree/bindings/clock/nvidia,tegra30-car.txt b/Documentation/devicetree/bindings/clock/nvidia,tegra30-car.txt
index 0f714081e986..63618cde12df 100644
--- a/Documentation/devicetree/bindings/clock/nvidia,tegra30-car.txt
+++ b/Documentation/devicetree/bindings/clock/nvidia,tegra30-car.txt
@@ -15,6 +15,9 @@ Required properties :
   In clock consumers, this cell represents the clock ID exposed by the
   CAR. The assignments may be found in header file
   <dt-bindings/clock/tegra30-car.h>.
+- #reset-cells : Should be 1.
+  In clock consumers, this cell represents the bit number in the CAR's
+  array of CLK_RST_CONTROLLER_RST_DEVICES_* registers.
 
 Example SoC include file:
 
@@ -23,6 +26,7 @@ Example SoC include file:
                 compatible = "nvidia,tegra30-car";
                 reg = <0x60006000 0x1000>;
                 #clock-cells = <1>;
+                #reset-cells = <1>;
         };
 
         usb@c5004000 {
diff --git a/Documentation/devicetree/bindings/dma/tegra20-apbdma.txt b/Documentation/devicetree/bindings/dma/tegra20-apbdma.txt
index 90fa7da525b8..c6908e7c42cc 100644
--- a/Documentation/devicetree/bindings/dma/tegra20-apbdma.txt
+++ b/Documentation/devicetree/bindings/dma/tegra20-apbdma.txt
@@ -5,6 +5,16 @@ Required properties:
 - reg: Should contain DMA registers location and length. This shuld include
   all of the per-channel registers.
 - interrupts: Should contain all of the per-channel DMA interrupts.
+- clocks: Must contain one entry, for the module clock.
+  See ../clocks/clock-bindings.txt for details.
+- resets : Must contain an entry for each entry in reset-names.
+  See ../reset/reset.txt for details.
+- reset-names : Must include the following entries:
+  - dma
+- #dma-cells : Must be <1>. This dictates the length of DMA specifiers in
+  client nodes' dmas properties. The specifier represents the DMA request
+  select value for the peripheral. For more details, consult the Tegra TRM's
+  documentation of the APB DMA channel control register REQ_SEL field.
 
 Examples:
 
@@ -27,4 +37,8 @@ apbdma: dma@6000a000 {
                        0 149 0x04
                        0 150 0x04
                        0 151 0x04 >;
+        clocks = <&tegra_car 34>;
+        resets = <&tegra_car 34>;
+        reset-names = "dma";
+        #dma-cells = <1>;
 };
diff --git a/Documentation/devicetree/bindings/gpu/nvidia,tegra20-host1x.txt b/Documentation/devicetree/bindings/gpu/nvidia,tegra20-host1x.txt
index b4fa934ae3a2..ab45c02aa658 100644
--- a/Documentation/devicetree/bindings/gpu/nvidia,tegra20-host1x.txt
+++ b/Documentation/devicetree/bindings/gpu/nvidia,tegra20-host1x.txt
@@ -9,6 +9,12 @@ Required properties:
 - #size-cells: The number of cells used to represent the size of an address
   range in the host1x address space. Should be 1.
 - ranges: The mapping of the host1x address space to the CPU address space.
+- clocks: Must contain one entry, for the module clock.
+  See ../clocks/clock-bindings.txt for details.
+- resets: Must contain an entry for each entry in reset-names.
+  See ../reset/reset.txt for details.
+- reset-names: Must include the following entries:
+  - host1x
 
 The host1x top-level node defines a number of children, each representing one
 of the following host1x client modules:
@@ -19,6 +25,12 @@ of the following host1x client modules:
   - compatible: "nvidia,tegra<chip>-mpe"
   - reg: Physical base address and length of the controller's registers.
   - interrupts: The interrupt outputs from the controller.
+  - clocks: Must contain one entry, for the module clock.
+    See ../clocks/clock-bindings.txt for details.
+  - resets: Must contain an entry for each entry in reset-names.
+    See ../reset/reset.txt for details.
+  - reset-names: Must include the following entries:
+    - mpe
 
 - vi: video input
 
@@ -26,6 +38,12 @@ of the following host1x client modules:
   - compatible: "nvidia,tegra<chip>-vi"
   - reg: Physical base address and length of the controller's registers.
   - interrupts: The interrupt outputs from the controller.
+  - clocks: Must contain one entry, for the module clock.
+    See ../clocks/clock-bindings.txt for details.
+  - resets: Must contain an entry for each entry in reset-names.
+    See ../reset/reset.txt for details.
+  - reset-names: Must include the following entries:
+    - vi
 
 - epp: encoder pre-processor
 
@@ -33,6 +51,12 @@ of the following host1x client modules:
   - compatible: "nvidia,tegra<chip>-epp"
   - reg: Physical base address and length of the controller's registers.
   - interrupts: The interrupt outputs from the controller.
+  - clocks: Must contain one entry, for the module clock.
+    See ../clocks/clock-bindings.txt for details.
+  - resets: Must contain an entry for each entry in reset-names.
+    See ../reset/reset.txt for details.
+  - reset-names: Must include the following entries:
+    - epp
 
 - isp: image signal processor
 
@@ -40,6 +64,12 @@ of the following host1x client modules:
   - compatible: "nvidia,tegra<chip>-isp"
   - reg: Physical base address and length of the controller's registers.
   - interrupts: The interrupt outputs from the controller.
+  - clocks: Must contain one entry, for the module clock.
+    See ../clocks/clock-bindings.txt for details.
+  - resets: Must contain an entry for each entry in reset-names.
+    See ../reset/reset.txt for details.
+  - reset-names: Must include the following entries:
+    - isp
 
 - gr2d: 2D graphics engine
 
@@ -47,12 +77,30 @@ of the following host1x client modules:
   - compatible: "nvidia,tegra<chip>-gr2d"
   - reg: Physical base address and length of the controller's registers.
   - interrupts: The interrupt outputs from the controller.
+  - clocks: Must contain one entry, for the module clock.
+    See ../clocks/clock-bindings.txt for details.
+  - resets: Must contain an entry for each entry in reset-names.
+    See ../reset/reset.txt for details.
+  - reset-names: Must include the following entries:
+    - 2d
 
 - gr3d: 3D graphics engine
 
   Required properties:
   - compatible: "nvidia,tegra<chip>-gr3d"
   - reg: Physical base address and length of the controller's registers.
+  - clocks: Must contain an entry for each entry in clock-names.
+    See ../clocks/clock-bindings.txt for details.
+  - clock-names: Must include the following entries:
+    (This property may be omitted if the only clock in the list is "3d")
+    - 3d
+      This MUST be the first entry.
+    - 3d2 (Only required on SoCs with two 3D clocks)
+  - resets: Must contain an entry for each entry in reset-names.
+    See ../reset/reset.txt for details.
+  - reset-names: Must include the following entries:
+    - 3d
+    - 3d2 (Only required on SoCs with two 3D clocks)
 
 - dc: display controller
 
@@ -60,6 +108,16 @@ of the following host1x client modules:
   - compatible: "nvidia,tegra<chip>-dc"
   - reg: Physical base address and length of the controller's registers.
   - interrupts: The interrupt outputs from the controller.
+  - clocks: Must contain an entry for each entry in clock-names.
+    See ../clocks/clock-bindings.txt for details.
+  - clock-names: Must include the following entries:
+    - dc
+      This MUST be the first entry.
+    - parent
+  - resets: Must contain an entry for each entry in reset-names.
+    See ../reset/reset.txt for details.
+  - reset-names: Must include the following entries:
+    - dc
 
   Each display controller node has a child node, named "rgb", that represents
   the RGB output associated with the controller. It can take the following
@@ -76,6 +134,16 @@ of the following host1x client modules:
   - interrupts: The interrupt outputs from the controller.
   - vdd-supply: regulator for supply voltage
   - pll-supply: regulator for PLL
+  - clocks: Must contain an entry for each entry in clock-names.
+    See ../clocks/clock-bindings.txt for details.
+  - clock-names: Must include the following entries:
+    - hdmi
+      This MUST be the first entry.
+    - parent
+  - resets: Must contain an entry for each entry in reset-names.
+    See ../reset/reset.txt for details.
+  - reset-names: Must include the following entries:
+    - hdmi
 
   Optional properties:
   - nvidia,ddc-i2c-bus: phandle of an I2C controller used for DDC EDID probing
@@ -88,12 +156,24 @@ of the following host1x client modules:
   - compatible: "nvidia,tegra<chip>-tvo"
   - reg: Physical base address and length of the controller's registers.
   - interrupts: The interrupt outputs from the controller.
+  - clocks: Must contain one entry, for the module clock.
+    See ../clocks/clock-bindings.txt for details.
 
 - dsi: display serial interface
 
   Required properties:
   - compatible: "nvidia,tegra<chip>-dsi"
   - reg: Physical base address and length of the controller's registers.
+  - clocks: Must contain an entry for each entry in clock-names.
+    See ../clocks/clock-bindings.txt for details.
+  - clock-names: Must include the following entries:
+    - dsi
+      This MUST be the first entry.
+    - parent
+  - resets: Must contain an entry for each entry in reset-names.
+    See ../reset/reset.txt for details.
+  - reset-names: Must include the following entries:
+    - dsi
 
 Example:
 
@@ -105,6 +185,9 @@ Example:
                 reg = <0x50000000 0x00024000>;
                 interrupts = <0 65 0x04   /* mpcore syncpt */
                               0 67 0x04>; /* mpcore general */
+                clocks = <&tegra_car TEGRA20_CLK_HOST1X>;
+                resets = <&tegra_car 28>;
+                reset-names = "host1x";
 
                 #address-cells = <1>;
                 #size-cells = <1>;
@@ -115,41 +198,64 @@ Example:
                         compatible = "nvidia,tegra20-mpe";
                         reg = <0x54040000 0x00040000>;
                         interrupts = <0 68 0x04>;
+                        clocks = <&tegra_car TEGRA20_CLK_MPE>;
+                        resets = <&tegra_car 60>;
+                        reset-names = "mpe";
                 };
 
                 vi {
                         compatible = "nvidia,tegra20-vi";
                         reg = <0x54080000 0x00040000>;
                         interrupts = <0 69 0x04>;
+                        clocks = <&tegra_car TEGRA20_CLK_VI>;
+                        resets = <&tegra_car 100>;
+                        reset-names = "vi";
                 };
 
                 epp {
                         compatible = "nvidia,tegra20-epp";
                         reg = <0x540c0000 0x00040000>;
                         interrupts = <0 70 0x04>;
+                        clocks = <&tegra_car TEGRA20_CLK_EPP>;
+                        resets = <&tegra_car 19>;
+                        reset-names = "epp";
                 };
 
                 isp {
                         compatible = "nvidia,tegra20-isp";
                         reg = <0x54100000 0x00040000>;
                         interrupts = <0 71 0x04>;
+                        clocks = <&tegra_car TEGRA20_CLK_ISP>;
+                        resets = <&tegra_car 23>;
+                        reset-names = "isp";
                 };
 
                 gr2d {
                         compatible = "nvidia,tegra20-gr2d";
                         reg = <0x54140000 0x00040000>;
                         interrupts = <0 72 0x04>;
+                        clocks = <&tegra_car TEGRA20_CLK_GR2D>;
+                        resets = <&tegra_car 21>;
+                        reset-names = "2d";
                 };
 
                 gr3d {
                         compatible = "nvidia,tegra20-gr3d";
                         reg = <0x54180000 0x00040000>;
+                        clocks = <&tegra_car TEGRA20_CLK_GR3D>;
+                        resets = <&tegra_car 24>;
+                        reset-names = "3d";
                 };
 
                 dc@54200000 {
                         compatible = "nvidia,tegra20-dc";
                         reg = <0x54200000 0x00040000>;
                         interrupts = <0 73 0x04>;
+                        clocks = <&tegra_car TEGRA20_CLK_DISP1>,
+                                 <&tegra_car TEGRA20_CLK_PLL_P>;
+                        clock-names = "disp1", "parent";
+                        resets = <&tegra_car 27>;
+                        reset-names = "dc";
 
                         rgb {
                                 status = "disabled";
@@ -160,6 +266,11 @@ Example:
                         compatible = "nvidia,tegra20-dc";
                         reg = <0x54240000 0x00040000>;
                         interrupts = <0 74 0x04>;
+                        clocks = <&tegra_car TEGRA20_CLK_DISP2>,
+                                 <&tegra_car TEGRA20_CLK_PLL_P>;
+                        clock-names = "disp2", "parent";
+                        resets = <&tegra_car 26>;
+                        reset-names = "dc";
 
                         rgb {
                                 status = "disabled";
@@ -170,6 +281,11 @@ Example:
                         compatible = "nvidia,tegra20-hdmi";
                         reg = <0x54280000 0x00040000>;
                         interrupts = <0 75 0x04>;
+                        clocks = <&tegra_car TEGRA20_CLK_HDMI>,
+                                 <&tegra_car TEGRA20_CLK_PLL_D_OUT0>;
+                        clock-names = "hdmi", "parent";
+                        resets = <&tegra_car 51>;
+                        reset-names = "hdmi";
                         status = "disabled";
                 };
 
@@ -177,12 +293,18 @@ Example:
                         compatible = "nvidia,tegra20-tvo";
                         reg = <0x542c0000 0x00040000>;
                         interrupts = <0 76 0x04>;
+                        clocks = <&tegra_car TEGRA20_CLK_TVO>;
                         status = "disabled";
                 };
 
                 dsi {
                         compatible = "nvidia,tegra20-dsi";
                         reg = <0x54300000 0x00040000>;
+                        clocks = <&tegra_car TEGRA20_CLK_DSI>,
+                                 <&tegra_car TEGRA20_CLK_PLL_D_OUT0>;
+                        clock-names = "dsi", "parent";
+                        resets = <&tegra_car 48>;
+                        reset-names = "dsi";
                         status = "disabled";
                 };
         };
diff --git a/Documentation/devicetree/bindings/i2c/nvidia,tegra20-i2c.txt b/Documentation/devicetree/bindings/i2c/nvidia,tegra20-i2c.txt
index ef77cc7a0e46..87507e9ce6db 100644
--- a/Documentation/devicetree/bindings/i2c/nvidia,tegra20-i2c.txt
+++ b/Documentation/devicetree/bindings/i2c/nvidia,tegra20-i2c.txt
@@ -39,12 +39,23 @@ Required properties:
 - interrupts: Should contain I2C controller interrupts.
 - address-cells: Address cells for I2C device address.
 - size-cells: Size of the I2C device address.
-- clocks: Clock ID as per
-                Documentation/devicetree/bindings/clock/tegra<chip-id>.txt
-        for I2C controller.
-- clock-names: Name of the clock:
-        Tegra20/Tegra30 I2C controller: "div-clk and "fast-clk".
-        Tegra114 I2C controller: "div-clk".
+- clocks: Must contain an entry for each entry in clock-names.
+  See ../clocks/clock-bindings.txt for details.
+- clock-names: Must include the following entries:
+  Tegra20/Tegra30:
+  - div-clk
+  - fast-clk
+  Tegra114:
+  - div-clk
+- resets: Must contain an entry for each entry in reset-names.
+  See ../reset/reset.txt for details.
+- reset-names: Must include the following entries:
+  - i2c
+- dmas: Must contain an entry for each entry in clock-names.
+  See ../dma/dma.txt for details.
+- dma-names: Must include the following entries:
+  - rx
+  - tx
 
 Example:
 
@@ -56,5 +67,9 @@ Example:
                 #size-cells = <0>;
                 clocks = <&tegra_car 12>, <&tegra_car 124>;
                 clock-names = "div-clk", "fast-clk";
+                resets = <&tegra_car 12>;
+                reset-names = "i2c";
+                dmas = <&apbdma 16>, <&apbdma 16>;
+                dma-names = "rx", "tx";
                 status = "disabled";
         };
diff --git a/Documentation/devicetree/bindings/input/nvidia,tegra20-kbc.txt b/Documentation/devicetree/bindings/input/nvidia,tegra20-kbc.txt
index 2995fae7ee47..0382b8bd69c6 100644
--- a/Documentation/devicetree/bindings/input/nvidia,tegra20-kbc.txt
+++ b/Documentation/devicetree/bindings/input/nvidia,tegra20-kbc.txt
@@ -13,6 +13,12 @@ Required properties:
   array of pin numbers which is used as column.
 - linux,keymap: The keymap for keys as described in the binding document
   devicetree/bindings/input/matrix-keymap.txt.
+- clocks: Must contain one entry, for the module clock.
+  See ../clocks/clock-bindings.txt for details.
+- resets: Must contain an entry for each entry in reset-names.
+  See ../reset/reset.txt for details.
+- reset-names: Must include the following entries:
+  - kbc
 
 Optional properties, in addition to those specified by the shared
 matrix-keyboard bindings:
@@ -31,6 +37,9 @@ keyboard: keyboard {
         compatible = "nvidia,tegra20-kbc";
         reg = <0x7000e200 0x100>;
         interrupts = <0 85 0x04>;
+        clocks = <&tegra_car 36>;
+        resets = <&tegra_car 36>;
+        reset-names = "kbc";
         nvidia,ghost-filter;
         nvidia,debounce-delay-ms = <640>;
         nvidia,kbc-row-pins = <0 1 2>;    /* pin 0, 1, 2 as rows */
diff --git a/Documentation/devicetree/bindings/mmc/nvidia,tegra20-sdhci.txt b/Documentation/devicetree/bindings/mmc/nvidia,tegra20-sdhci.txt
index c6d7b11db9eb..f357c16ea815 100644
--- a/Documentation/devicetree/bindings/mmc/nvidia,tegra20-sdhci.txt
+++ b/Documentation/devicetree/bindings/mmc/nvidia,tegra20-sdhci.txt
@@ -8,6 +8,12 @@ by mmc.txt and the properties used by the sdhci-tegra driver.
 
 Required properties:
 - compatible : Should be "nvidia,<chip>-sdhci"
+- clocks : Must contain one entry, for the module clock.
+  See ../clocks/clock-bindings.txt for details.
+- resets : Must contain an entry for each entry in reset-names.
+  See ../reset/reset.txt for details.
+- reset-names : Must include the following entries:
+  - sdhci
 
 Optional properties:
 - power-gpios : Specify GPIOs for power control
@@ -18,6 +24,9 @@ sdhci@c8000200 {
         compatible = "nvidia,tegra20-sdhci";
         reg = <0xc8000200 0x200>;
         interrupts = <47>;
+        clocks = <&tegra_car 14>;
+        resets = <&tegra_car 14>;
+        reset-names = "sdhci";
         cd-gpios = <&gpio 69 0>; /* gpio PI5 */
         wp-gpios = <&gpio 57 0>; /* gpio PH1 */
         power-gpios = <&gpio 155 0>; /* gpio PT3 */
diff --git a/Documentation/devicetree/bindings/nvec/nvidia,nvec.txt b/Documentation/devicetree/bindings/nvec/nvidia,nvec.txt
index 5aeee53ff9f4..5ae601e7f51f 100644
--- a/Documentation/devicetree/bindings/nvec/nvidia,nvec.txt
+++ b/Documentation/devicetree/bindings/nvec/nvidia,nvec.txt
@@ -7,3 +7,15 @@ Required properties:
 - clock-frequency : the frequency of the i2c bus
 - gpios : the gpio used for ec request
 - slave-addr: the i2c address of the slave controller
+- clocks : Must contain an entry for each entry in clock-names.
+  See ../clocks/clock-bindings.txt for details.
+- clock-names : Must include the following entries:
+  Tegra20/Tegra30:
+  - div-clk
+  - fast-clk
+  Tegra114:
+  - div-clk
+- resets : Must contain an entry for each entry in reset-names.
+  See ../reset/reset.txt for details.
+- reset-names : Must include the following entries:
+  - i2c
diff --git a/Documentation/devicetree/bindings/pci/nvidia,tegra20-pcie.txt b/Documentation/devicetree/bindings/pci/nvidia,tegra20-pcie.txt
index 6b7510775c50..24cee06915c9 100644
--- a/Documentation/devicetree/bindings/pci/nvidia,tegra20-pcie.txt
+++ b/Documentation/devicetree/bindings/pci/nvidia,tegra20-pcie.txt
@@ -42,14 +42,19 @@ Required properties:
     - 0xc2000000: prefetchable memory region
   Please refer to the standard PCI bus binding document for a more detailed
   explanation.
-- clocks: List of clock inputs of the controller. Must contain an entry for
-  each entry in the clock-names property.
+- clocks: Must contain an entry for each entry in clock-names.
+  See ../clocks/clock-bindings.txt for details.
 - clock-names: Must include the following entries:
-  "pex": The Tegra clock of that name
-  "afi": The Tegra clock of that name
-  "pcie_xclk": The Tegra clock of that name
-  "pll_e": The Tegra clock of that name
-  "cml": The Tegra clock of that name (not required for Tegra20)
+  - pex
+  - afi
+  - pll_e
+  - cml (not required for Tegra20)
+- resets: Must contain an entry for each entry in reset-names.
+  See ../reset/reset.txt for details.
+- reset-names: Must include the following entries:
+  - pex
+  - afi
+  - pcie_x
 
 Root ports are defined as subnodes of the PCIe controller node.
 
@@ -91,9 +96,10 @@ SoC DTSI:
                           0x82000000 0 0xa0000000 0xa0000000 0 0x10000000   /* non-prefetchable memory */
                           0xc2000000 0 0xb0000000 0xb0000000 0 0x10000000>; /* prefetchable memory */
 
-                clocks = <&tegra_car 70>, <&tegra_car 72>, <&tegra_car 74>,
-                         <&tegra_car 118>;
-                clock-names = "pex", "afi", "pcie_xclk", "pll_e";
+                clocks = <&tegra_car 70>, <&tegra_car 72>, <&tegra_car 118>;
+                clock-names = "pex", "afi", "pll_e";
+                resets = <&tegra_car 70>, <&tegra_car 72>, <&tegra_car 74>;
+                reset-names = "pex", "afi", "pcie_x";
                 status = "disabled";
 
                 pci@1,0 {
diff --git a/Documentation/devicetree/bindings/pwm/nvidia,tegra20-pwm.txt b/Documentation/devicetree/bindings/pwm/nvidia,tegra20-pwm.txt
index c3fc57af8772..c7ea9d4a988b 100644
--- a/Documentation/devicetree/bindings/pwm/nvidia,tegra20-pwm.txt
+++ b/Documentation/devicetree/bindings/pwm/nvidia,tegra20-pwm.txt
@@ -7,6 +7,12 @@ Required properties:
 - reg: physical base address and length of the controller's registers
 - #pwm-cells: should be 2. See pwm.txt in this directory for a description of
   the cells format.
+- clocks: Must contain one entry, for the module clock.
+  See ../clocks/clock-bindings.txt for details.
+- resets: Must contain an entry for each entry in reset-names.
+  See ../reset/reset.txt for details.
+- reset-names: Must include the following entries:
+  - pwm
 
 Example:
 
@@ -14,4 +20,7 @@ Example:
                 compatible = "nvidia,tegra20-pwm";
                 reg = <0x7000a000 0x100>;
                 #pwm-cells = <2>;
+                clocks = <&tegra_car 17>;
+                resets = <&tegra_car 17>;
+                reset-names = "pwm";
         };
diff --git a/Documentation/devicetree/bindings/rtc/nvidia,tegra20-rtc.txt b/Documentation/devicetree/bindings/rtc/nvidia,tegra20-rtc.txt
index 93f45e9dce7c..652d1ff2e8be 100644
--- a/Documentation/devicetree/bindings/rtc/nvidia,tegra20-rtc.txt
+++ b/Documentation/devicetree/bindings/rtc/nvidia,tegra20-rtc.txt
@@ -9,6 +9,8 @@ Required properties:
 - compatible : should be "nvidia,tegra20-rtc".
 - reg : Specifies base physical address and size of the registers.
 - interrupts : A single interrupt specifier.
+- clocks : Must contain one entry, for the module clock.
+  See ../clocks/clock-bindings.txt for details.
 
 Example:
 
@@ -16,4 +18,5 @@ timer {
         compatible = "nvidia,tegra20-rtc";
         reg = <0x7000e000 0x100>;
         interrupts = <0 2 0x04>;
+        clocks = <&tegra_car 4>;
 };
diff --git a/Documentation/devicetree/bindings/serial/nvidia,tegra20-hsuart.txt b/Documentation/devicetree/bindings/serial/nvidia,tegra20-hsuart.txt
index 392a4493eebd..845850caf088 100644
--- a/Documentation/devicetree/bindings/serial/nvidia,tegra20-hsuart.txt
+++ b/Documentation/devicetree/bindings/serial/nvidia,tegra20-hsuart.txt
@@ -4,8 +4,17 @@ Required properties:
 - compatible : should be "nvidia,tegra30-hsuart", "nvidia,tegra20-hsuart".
 - reg: Should contain UART controller registers location and length.
 - interrupts: Should contain UART controller interrupts.
-- nvidia,dma-request-selector : The Tegra DMA controller's phandle and
-  request selector for this UART controller.
+- clocks: Must contain one entry, for the module clock.
+  See ../clocks/clock-bindings.txt for details.
+- resets : Must contain an entry for each entry in reset-names.
+  See ../reset/reset.txt for details.
+- reset-names : Must include the following entries:
+  - serial
+- dmas : Must contain an entry for each entry in clock-names.
+  See ../dma/dma.txt for details.
+- dma-names : Must include the following entries:
+  - rx
+  - tx
 
 Optional properties:
 - nvidia,enable-modem-interrupt: Enable modem interrupts. Should be enable
@@ -18,7 +27,11 @@ serial@70006000 {
         reg = <0x70006000 0x40>;
         reg-shift = <2>;
         interrupts = <0 36 0x04>;
-        nvidia,dma-request-selector = <&apbdma 8>;
         nvidia,enable-modem-interrupt;
+        clocks = <&tegra_car 6>;
+        resets = <&tegra_car 6>;
+        reset-names = "serial";
+        dmas = <&apbdma 8>, <&apbdma 8>;
+        dma-names = "rx", "tx";
         status = "disabled";
 };
diff --git a/Documentation/devicetree/bindings/sound/nvidia,tegra-audio-alc5632.txt b/Documentation/devicetree/bindings/sound/nvidia,tegra-audio-alc5632.txt
index 8b8903ef0800..57f40f93453e 100644
--- a/Documentation/devicetree/bindings/sound/nvidia,tegra-audio-alc5632.txt
+++ b/Documentation/devicetree/bindings/sound/nvidia,tegra-audio-alc5632.txt
@@ -3,10 +3,11 @@ NVIDIA Tegra audio complex
 Required properties:
 - compatible : "nvidia,tegra-audio-alc5632"
 - clocks : Must contain an entry for each entry in clock-names.
+  See ../clocks/clock-bindings.txt for details.
 - clock-names : Must include the following entries:
-  "pll_a" (The Tegra clock of that name),
-  "pll_a_out0" (The Tegra clock of that name),
-  "mclk" (The Tegra cdev1/extern1 clock, which feeds the CODEC's mclk)
+  - pll_a
+  - pll_a_out0
+  - mclk (The Tegra cdev1/extern1 clock, which feeds the CODEC's mclk)
 - nvidia,model : The user-visible name of this sound complex.
 - nvidia,audio-routing : A list of the connections between audio components.
   Each entry is a pair of strings, the first being the connection's sink,
diff --git a/Documentation/devicetree/bindings/sound/nvidia,tegra-audio-rt5640.txt b/Documentation/devicetree/bindings/sound/nvidia,tegra-audio-rt5640.txt
index dc6224994d69..7788808dcd0b 100644
--- a/Documentation/devicetree/bindings/sound/nvidia,tegra-audio-rt5640.txt
+++ b/Documentation/devicetree/bindings/sound/nvidia,tegra-audio-rt5640.txt
@@ -3,10 +3,11 @@ NVIDIA Tegra audio complex, with RT5640 CODEC
 Required properties:
 - compatible : "nvidia,tegra-audio-rt5640"
 - clocks : Must contain an entry for each entry in clock-names.
+  See ../clocks/clock-bindings.txt for details.
 - clock-names : Must include the following entries:
-  "pll_a" (The Tegra clock of that name),
-  "pll_a_out0" (The Tegra clock of that name),
-  "mclk" (The Tegra cdev1/extern1 clock, which feeds the CODEC's mclk)
+  - pll_a
+  - pll_a_out0
+  - mclk (The Tegra cdev1/extern1 clock, which feeds the CODEC's mclk)
 - nvidia,model : The user-visible name of this sound complex.
 - nvidia,audio-routing : A list of the connections between audio components.
   Each entry is a pair of strings, the first being the connection's sink,
diff --git a/Documentation/devicetree/bindings/sound/nvidia,tegra-audio-wm8753.txt b/Documentation/devicetree/bindings/sound/nvidia,tegra-audio-wm8753.txt
index aab6ce0ad2fc..96f6a57dd6b4 100644
--- a/Documentation/devicetree/bindings/sound/nvidia,tegra-audio-wm8753.txt
+++ b/Documentation/devicetree/bindings/sound/nvidia,tegra-audio-wm8753.txt
@@ -3,10 +3,11 @@ NVIDIA Tegra audio complex
 Required properties:
 - compatible : "nvidia,tegra-audio-wm8753"
 - clocks : Must contain an entry for each entry in clock-names.
+  See ../clocks/clock-bindings.txt for details.
 - clock-names : Must include the following entries:
-  "pll_a" (The Tegra clock of that name),
-  "pll_a_out0" (The Tegra clock of that name),
-  "mclk" (The Tegra cdev1/extern1 clock, which feeds the CODEC's mclk)
+  - pll_a
+  - pll_a_out0
+  - mclk (The Tegra cdev1/extern1 clock, which feeds the CODEC's mclk)
 - nvidia,model : The user-visible name of this sound complex.
 - nvidia,audio-routing : A list of the connections between audio components.
   Each entry is a pair of strings, the first being the connection's sink,
diff --git a/Documentation/devicetree/bindings/sound/nvidia,tegra-audio-wm8903.txt b/Documentation/devicetree/bindings/sound/nvidia,tegra-audio-wm8903.txt
index 4b44dfb6ca0d..b795d282818d 100644
--- a/Documentation/devicetree/bindings/sound/nvidia,tegra-audio-wm8903.txt
+++ b/Documentation/devicetree/bindings/sound/nvidia,tegra-audio-wm8903.txt
@@ -3,10 +3,11 @@ NVIDIA Tegra audio complex
 Required properties:
 - compatible : "nvidia,tegra-audio-wm8903"
 - clocks : Must contain an entry for each entry in clock-names.
+  See ../clocks/clock-bindings.txt for details.
 - clock-names : Must include the following entries:
-  "pll_a" (The Tegra clock of that name),
-  "pll_a_out0" (The Tegra clock of that name),
-  "mclk" (The Tegra cdev1/extern1 clock, which feeds the CODEC's mclk)
+  - pll_a
+  - pll_a_out0
+  - mclk (The Tegra cdev1/extern1 clock, which feeds the CODEC's mclk)
 - nvidia,model : The user-visible name of this sound complex.
 - nvidia,audio-routing : A list of the connections between audio components.
   Each entry is a pair of strings, the first being the connection's sink,
diff --git a/Documentation/devicetree/bindings/sound/nvidia,tegra-audio-wm9712.txt b/Documentation/devicetree/bindings/sound/nvidia,tegra-audio-wm9712.txt
index ad589b163639..436f6cd9d07c 100644
--- a/Documentation/devicetree/bindings/sound/nvidia,tegra-audio-wm9712.txt
+++ b/Documentation/devicetree/bindings/sound/nvidia,tegra-audio-wm9712.txt
@@ -3,10 +3,11 @@ NVIDIA Tegra audio complex
 Required properties:
 - compatible : "nvidia,tegra-audio-wm9712"
 - clocks : Must contain an entry for each entry in clock-names.
+  See ../clocks/clock-bindings.txt for details.
 - clock-names : Must include the following entries:
-  "pll_a" (The Tegra clock of that name),
-  "pll_a_out0" (The Tegra clock of that name),
-  "mclk" (The Tegra cdev1/extern1 clock, which feeds the CODEC's mclk)
+  - pll_a
+  - pll_a_out0
+  - mclk (The Tegra cdev1/extern1 clock, which feeds the CODEC's mclk)
 - nvidia,model : The user-visible name of this sound complex.
 - nvidia,audio-routing : A list of the connections between audio components.
   Each entry is a pair of strings, the first being the connection's sink,
diff --git a/Documentation/devicetree/bindings/sound/nvidia,tegra20-ac97.txt b/Documentation/devicetree/bindings/sound/nvidia,tegra20-ac97.txt
index c1454979c1ef..eaf00102d92c 100644
--- a/Documentation/devicetree/bindings/sound/nvidia,tegra20-ac97.txt
+++ b/Documentation/devicetree/bindings/sound/nvidia,tegra20-ac97.txt
@@ -4,19 +4,33 @@ Required properties:
 - compatible : "nvidia,tegra20-ac97"
 - reg : Should contain AC97 controller registers location and length
 - interrupts : Should contain AC97 interrupt
-- nvidia,dma-request-selector : The Tegra DMA controller's phandle and
-  request selector for the AC97 controller
+- resets : Must contain an entry for each entry in reset-names.
+  See ../reset/reset.txt for details.
+- reset-names : Must include the following entries:
+  - ac97
+- dmas : Must contain an entry for each entry in clock-names.
+  See ../dma/dma.txt for details.
+- dma-names : Must include the following entries:
+  - rx
+  - tx
+- clocks : Must contain one entry, for the module clock.
+  See ../clocks/clock-bindings.txt for details.
 - nvidia,codec-reset-gpio : The Tegra GPIO controller's phandle and the number
   of the GPIO used to reset the external AC97 codec
 - nvidia,codec-sync-gpio : The Tegra GPIO controller's phandle and the number
   of the GPIO corresponding with the AC97 DAP _FS line
+
 Example:
 
 ac97@70002000 {
         compatible = "nvidia,tegra20-ac97";
         reg = <0x70002000 0x200>;
         interrupts = <0 81 0x04>;
-        nvidia,dma-request-selector = <&apbdma 12>;
         nvidia,codec-reset-gpio = <&gpio 170 0>;
         nvidia,codec-sync-gpio = <&gpio 120 0>;
+        clocks = <&tegra_car 3>;
+        resets = <&tegra_car 3>;
+        reset-names = "ac97";
+        dmas = <&apbdma 12>, <&apbdma 12>;
+        dma-names = "rx", "tx";
 };
diff --git a/Documentation/devicetree/bindings/sound/nvidia,tegra20-i2s.txt b/Documentation/devicetree/bindings/sound/nvidia,tegra20-i2s.txt
index 0df2b5c816e3..dc30c6bfbe95 100644
--- a/Documentation/devicetree/bindings/sound/nvidia,tegra20-i2s.txt
+++ b/Documentation/devicetree/bindings/sound/nvidia,tegra20-i2s.txt
@@ -4,8 +4,17 @@ Required properties:
 - compatible : "nvidia,tegra20-i2s"
 - reg : Should contain I2S registers location and length
 - interrupts : Should contain I2S interrupt
-- nvidia,dma-request-selector : The Tegra DMA controller's phandle and
-  request selector for this I2S controller
+- resets : Must contain an entry for each entry in reset-names.
+  See ../reset/reset.txt for details.
+- reset-names : Must include the following entries:
+  - i2s
+- dmas : Must contain an entry for each entry in clock-names.
+  See ../dma/dma.txt for details.
+- dma-names : Must include the following entries:
+  - rx
+  - tx
+- clocks : Must contain one entry, for the module clock.
+  See ../clocks/clock-bindings.txt for details.
 
 Example:
 
@@ -13,5 +22,9 @@ i2s@70002800 {
         compatible = "nvidia,tegra20-i2s";
         reg = <0x70002800 0x200>;
         interrupts = < 45 >;
-        nvidia,dma-request-selector = < &apbdma 2 >;
+        clocks = <&tegra_car 11>;
+        resets = <&tegra_car 11>;
+        reset-names = "i2s";
+        dmas = <&apbdma 21>, <&apbdma 21>;
+        dma-names = "rx", "tx";
 };
diff --git a/Documentation/devicetree/bindings/sound/nvidia,tegra30-ahub.txt b/Documentation/devicetree/bindings/sound/nvidia,tegra30-ahub.txt
index 0e5c12c66523..946e2ac46091 100644
--- a/Documentation/devicetree/bindings/sound/nvidia,tegra30-ahub.txt
+++ b/Documentation/devicetree/bindings/sound/nvidia,tegra30-ahub.txt
@@ -7,18 +7,48 @@ Required properties:
   - Tegra30 requires 2 entries, for the APBIF and AHUB/AUDIO register blocks.
   - Tegra114 requires an additional entry, for the APBIF2 register block.
 - interrupts : Should contain AHUB interrupt
-- nvidia,dma-request-selector : A list of the DMA channel specifiers. Each
-  entry contains the Tegra DMA controller's phandle and request selector.
-  If a single entry is present, the request selectors for the channels are
-  assumed to be contiguous, and increment from this value.
-  If multiple values are given, one value must be given per channel.
-- clocks : Must contain an entry for each required entry in clock-names.
+- clocks : Must contain an entry for each entry in clock-names.
+  See ../clocks/clock-bindings.txt for details.
 - clock-names : Must include the following entries:
-  - Tegra30: Requires d_audio, apbif, i2s0, i2s1, i2s2, i2s3, i2s4, dam0,
-    dam1, dam2, spdif_in.
-  - Tegra114: Additionally requires amx, adx.
+  - d_audio
+  - apbif
+- resets : Must contain an entry for each entry in reset-names.
+  See ../reset/reset.txt for details.
+- reset-names : Must include the following entries:
+  Tegra30 and later:
+  - d_audio
+  - apbif
+  - i2s0
+  - i2s1
+  - i2s2
+  - i2s3
+  - i2s4
+  - dam0
+  - dam1
+  - dam2
+  - spdif
+  Tegra114 and later additionally require:
+  - amx
+  - adx
+  Tegra124 and later additionally require:
+  - amx1
+  - adx1
+  - afc0
+  - afc1
+  - afc2
+  - afc3
+  - afc4
+  - afc5
 - ranges : The bus address mapping for the configlink register bus.
   Can be empty since the mapping is 1:1.
+- dmas : Must contain an entry for each entry in clock-names.
+  See ../dma/dma.txt for details.
+- dma-names : Must include the following entries:
+  - rx0 .. rx<n>
+  - tx0 .. tx<n>
+  ... where n is:
+  Tegra30: 3
+  Tegra114, Tegra124: 9
 - #address-cells : For the configlink bus. Should be <1>;
 - #size-cells : For the configlink bus. Should be <1>.
 
@@ -35,13 +65,20 @@ ahub@70080000 {
         reg = <0x70080000 0x200 0x70080200 0x100>;
         interrupts = < 0 103 0x04 >;
         nvidia,dma-request-selector = <&apbdma 1>;
-        clocks = <&tegra_car 106>, <&tegra_car 107>, <&tegra_car 30>,
+        clocks = <&tegra_car 106>, <&tegra_car 107>;
+        clock-names = "d_audio", "apbif";
+        resets = <&tegra_car 106>, <&tegra_car 107>, <&tegra_car 30>,
                 <&tegra_car 11>, <&tegra_car 18>, <&tegra_car 101>,
                 <&tegra_car 102>, <&tegra_car 108>, <&tegra_car 109>,
-                <&tegra_car 110>, <&tegra_car 162>;
-        clock-names = "d_audio", "apbif", "i2s0", "i2s1", "i2s2",
+                <&tegra_car 110>, <&tegra_car 10>;
+        reset-names = "d_audio", "apbif", "i2s0", "i2s1", "i2s2",
                 "i2s3", "i2s4", "dam0", "dam1", "dam2",
-                "spdif_in";
+                "spdif";
+        dmas = <&apbdma 1>, <&apbdma 1>;
+               <&apbdma 2>, <&apbdma 2>;
+               <&apbdma 3>, <&apbdma 3>;
+               <&apbdma 4>, <&apbdma 4>;
+        dma-names = "rx0", "tx0", "rx1", "tx1", "rx2", "tx2", "rx3", "tx3";
         ranges;
         #address-cells = <1>;
         #size-cells = <1>;
diff --git a/Documentation/devicetree/bindings/sound/nvidia,tegra30-i2s.txt b/Documentation/devicetree/bindings/sound/nvidia,tegra30-i2s.txt
index dfa6c037124a..0c113ffe3814 100644
--- a/Documentation/devicetree/bindings/sound/nvidia,tegra30-i2s.txt
+++ b/Documentation/devicetree/bindings/sound/nvidia,tegra30-i2s.txt
@@ -3,13 +3,22 @@ NVIDIA Tegra30 I2S controller
 Required properties:
 - compatible : "nvidia,tegra30-i2s"
 - reg : Should contain I2S registers location and length
+- clocks : Must contain one entry, for the module clock.
+  See ../clocks/clock-bindings.txt for details.
+- resets : Must contain an entry for each entry in reset-names.
+  See ../reset/reset.txt for details.
+- reset-names : Must include the following entries:
+  - i2s
 - nvidia,ahub-cif-ids : The list of AHUB CIF IDs for this port, rx (playback)
   first, tx (capture) second. See nvidia,tegra30-ahub.txt for values.
 
 Example:
 
-i2s@70002800 {
+i2s@70080300 {
         compatible = "nvidia,tegra30-i2s";
         reg = <0x70080300 0x100>;
         nvidia,ahub-cif-ids = <4 4>;
+        clocks = <&tegra_car 11>;
+        resets = <&tegra_car 11>;
+        reset-names = "i2s";
 };
diff --git a/Documentation/devicetree/bindings/spi/nvidia,tegra114-spi.txt b/Documentation/devicetree/bindings/spi/nvidia,tegra114-spi.txt
index 91ff771c7e77..7ea701e07dc2 100644
--- a/Documentation/devicetree/bindings/spi/nvidia,tegra114-spi.txt
+++ b/Documentation/devicetree/bindings/spi/nvidia,tegra114-spi.txt
@@ -4,10 +4,19 @@ Required properties:
 - compatible : should be "nvidia,tegra114-spi".
 - reg: Should contain SPI registers location and length.
 - interrupts: Should contain SPI interrupts.
-- nvidia,dma-request-selector : The Tegra DMA controller's phandle and
-  request selector for this SPI controller.
-- This is also require clock named "spi" as per binding document
-  Documentation/devicetree/bindings/clock/clock-bindings.txt
+- clock-names : Must include the following entries:
+  - spi
+- resets : Must contain an entry for each entry in reset-names.
+  See ../reset/reset.txt for details.
+- reset-names : Must include the following entries:
+  - spi
+- dmas : Must contain an entry for each entry in clock-names.
+  See ../dma/dma.txt for details.
+- dma-names : Must include the following entries:
+  - rx
+  - tx
+- clocks : Must contain an entry for each entry in clock-names.
+  See ../clocks/clock-bindings.txt for details.
 
 Recommended properties:
 - spi-max-frequency: Definition as per
@@ -18,9 +27,14 @@ spi@7000d600 {
         compatible = "nvidia,tegra114-spi";
         reg = <0x7000d600 0x200>;
         interrupts = <0 82 0x04>;
-        nvidia,dma-request-selector = <&apbdma 16>;
         spi-max-frequency = <25000000>;
         #address-cells = <1>;
         #size-cells = <0>;
+        clocks = <&tegra_car 44>;
+        clock-names = "spi";
+        resets = <&tegra_car 44>;
+        reset-names = "spi";
+        dmas = <&apbdma 16>, <&apbdma 16>;
+        dma-names = "rx", "tx";
         status = "disabled";
 };
diff --git a/Documentation/devicetree/bindings/spi/nvidia,tegra20-sflash.txt b/Documentation/devicetree/bindings/spi/nvidia,tegra20-sflash.txt
index 7b53da5cb75b..bdf08e6dec9b 100644
--- a/Documentation/devicetree/bindings/spi/nvidia,tegra20-sflash.txt
+++ b/Documentation/devicetree/bindings/spi/nvidia,tegra20-sflash.txt
@@ -4,8 +4,17 @@ Required properties:
 - compatible : should be "nvidia,tegra20-sflash".
 - reg: Should contain SFLASH registers location and length.
 - interrupts: Should contain SFLASH interrupts.
-- nvidia,dma-request-selector : The Tegra DMA controller's phandle and
-  request selector for this SFLASH controller.
+- clocks : Must contain one entry, for the module clock.
+  See ../clocks/clock-bindings.txt for details.
+- resets : Must contain an entry for each entry in reset-names.
+  See ../reset/reset.txt for details.
+- reset-names : Must include the following entries:
+  - spi
+- dmas : Must contain an entry for each entry in clock-names.
+  See ../dma/dma.txt for details.
+- dma-names : Must include the following entries:
+  - rx
+  - tx
 
 Recommended properties:
 - spi-max-frequency: Definition as per
@@ -17,10 +26,13 @@ spi@7000c380 {
         compatible = "nvidia,tegra20-sflash";
         reg = <0x7000c380 0x80>;
         interrupts = <0 39 0x04>;
-        nvidia,dma-request-selector = <&apbdma 16>;
         spi-max-frequency = <25000000>;
         #address-cells = <1>;
         #size-cells = <0>;
+        clocks = <&tegra_car 43>;
+        resets = <&tegra_car 43>;
+        reset-names = "spi";
+        dmas = <&apbdma 11>, <&apbdma 11>;
+        dma-names = "rx", "tx";
         status = "disabled";
 };
-
diff --git a/Documentation/devicetree/bindings/spi/nvidia,tegra20-slink.txt b/Documentation/devicetree/bindings/spi/nvidia,tegra20-slink.txt
index eefe15e3d95e..5db9144a33c8 100644
--- a/Documentation/devicetree/bindings/spi/nvidia,tegra20-slink.txt
+++ b/Documentation/devicetree/bindings/spi/nvidia,tegra20-slink.txt
@@ -4,8 +4,17 @@ Required properties:
 - compatible : should be "nvidia,tegra20-slink", "nvidia,tegra30-slink".
 - reg: Should contain SLINK registers location and length.
 - interrupts: Should contain SLINK interrupts.
-- nvidia,dma-request-selector : The Tegra DMA controller's phandle and
-  request selector for this SLINK controller.
+- clocks : Must contain one entry, for the module clock.
+  See ../clocks/clock-bindings.txt for details.
+- resets : Must contain an entry for each entry in reset-names.
+  See ../reset/reset.txt for details.
+- reset-names : Must include the following entries:
+  - spi
+- dmas : Must contain an entry for each entry in clock-names.
+  See ../dma/dma.txt for details.
+- dma-names : Must include the following entries:
+  - rx
+  - tx
 
 Recommended properties:
 - spi-max-frequency: Definition as per
@@ -17,10 +26,13 @@ spi@7000d600 {
         compatible = "nvidia,tegra20-slink";
         reg = <0x7000d600 0x200>;
         interrupts = <0 82 0x04>;
-        nvidia,dma-request-selector = <&apbdma 16>;
         spi-max-frequency = <25000000>;
         #address-cells = <1>;
         #size-cells = <0>;
+        clocks = <&tegra_car 44>;
+        resets = <&tegra_car 44>;
+        reset-names = "spi";
+        dmas = <&apbdma 16>, <&apbdma 16>;
+        dma-names = "rx", "tx";
         status = "disabled";
 };
-
diff --git a/Documentation/devicetree/bindings/timer/nvidia,tegra20-timer.txt b/Documentation/devicetree/bindings/timer/nvidia,tegra20-timer.txt
index e019fdc38773..4a864bd10d3d 100644
--- a/Documentation/devicetree/bindings/timer/nvidia,tegra20-timer.txt
+++ b/Documentation/devicetree/bindings/timer/nvidia,tegra20-timer.txt
@@ -8,6 +8,8 @@ Required properties:
 - compatible : should be "nvidia,tegra20-timer".
 - reg : Specifies base physical address and size of the registers.
 - interrupts : A list of 4 interrupts; one per timer channel.
+- clocks : Must contain one entry, for the module clock.
+  See ../clocks/clock-bindings.txt for details.
 
 Example:
 
@@ -18,4 +20,5 @@ timer {
                         0 1 0x04
                         0 41 0x04
                         0 42 0x04>;
+        clocks = <&tegra_car 132>;
 };
diff --git a/Documentation/devicetree/bindings/timer/nvidia,tegra30-timer.txt b/Documentation/devicetree/bindings/timer/nvidia,tegra30-timer.txt
index 906109d4c593..b5082a1cf461 100644
--- a/Documentation/devicetree/bindings/timer/nvidia,tegra30-timer.txt
+++ b/Documentation/devicetree/bindings/timer/nvidia,tegra30-timer.txt
@@ -10,6 +10,8 @@ Required properties:
 - reg : Specifies base physical address and size of the registers.
 - interrupts : A list of 6 interrupts; one per each of timer channels 1
     through 5, and one for the shared interrupt for the remaining channels.
+- clocks : Must contain one entry, for the module clock.
+  See ../clocks/clock-bindings.txt for details.
 
 timer {
         compatible = "nvidia,tegra30-timer", "nvidia,tegra20-timer";
@@ -20,4 +22,5 @@ timer {
                       0 42 0x04
                       0 121 0x04
                       0 122 0x04>;
+        clocks = <&tegra_car 214>;
 };
diff --git a/Documentation/devicetree/bindings/usb/nvidia,tegra20-ehci.txt b/Documentation/devicetree/bindings/usb/nvidia,tegra20-ehci.txt
index df0933043a5b..3dc9140e3dfb 100644
--- a/Documentation/devicetree/bindings/usb/nvidia,tegra20-ehci.txt
+++ b/Documentation/devicetree/bindings/usb/nvidia,tegra20-ehci.txt
@@ -8,7 +8,12 @@ and additions :
 Required properties :
  - compatible : Should be "nvidia,tegra20-ehci".
  - nvidia,phy : phandle of the PHY that the controller is connected to.
- - clocks : Contains a single entry which defines the USB controller's clock.
+ - clocks : Must contain one entry, for the module clock.
+   See ../clocks/clock-bindings.txt for details.
+ - resets : Must contain an entry for each entry in reset-names.
+   See ../reset/reset.txt for details.
+ - reset-names : Must include the following entries:
+   - usb
 
 Optional properties:
  - nvidia,needs-double-reset : boolean is to be set for some of the Tegra20