ARM: OMAP2/3: intc: Add DT support for TI interrupt controller

Add a function to initialize the OMAP2/3 interrupt controller (INTC)
using a device tree node.

This version take advantage of the new irq_domain_add_legacy API.

Replace some printk() with the proper pr_ macro.

Signed-off-by: Benoit Cousson <b-cousson@ti.com>
Cc: Tony Lindgren <tony@atomide.com>
Acked-by: Rob Herring <rob.herring@calxeda.com>
Acked-by: Grant Likely <grant.likely@secretlab.ca>

1 files changed, 27 insertions, 0 deletions

diff --git a/Documentation/devicetree/bindings/arm/omap/intc.txt b/Documentation/devicetree/bindings/arm/omap/intc.txt
new file mode 100644
index 000000000000..f2583e6ec060
--- /dev/null
+++ b/Documentation/devicetree/bindings/arm/omap/intc.txt
@@ -0,0 +1,27 @@
+* OMAP Interrupt Controller
+
+OMAP2/3 are using a TI interrupt controller that can support several
+configurable number of interrupts.
+
+Main node required properties:
+
+- compatible : should be:
+        "ti,omap2-intc"
+- interrupt-controller : Identifies the node as an interrupt controller
+- #interrupt-cells : Specifies the number of cells needed to encode an
+  interrupt source. The type shall be a <u32> and the value shall be 1.
+
+  The cell contains the interrupt number in the range [0-128].
+- ti,intc-size: Number of interrupts handled by the interrupt controller.
+- reg: physical base address and size of the intc registers map.
+
+Example:
+
+        intc: interrupt-controller@1 {
+                compatible = "ti,omap2-intc";
+                interrupt-controller;
+                #interrupt-cells = <1>;
+                ti,intc-size = <96>;
+                reg = <0x48200000 0x1000>;
+        };
+