aboutsummaryrefslogtreecommitdiffstats
path: root/Documentation/devicetree
diff options
context:
space:
mode:
authorLaxman Dewangan <ldewangan@nvidia.com>2013-01-29 04:05:15 -0500
committerSamuel Ortiz <sameo@linux.intel.com>2013-02-13 18:22:55 -0500
commit40719314f259ab9409ca3d48551c17aa23bc2b4d (patch)
tree21d2202158e90aa4c3f798c1527a229290e6a444 /Documentation/devicetree
parent5f384c1f8be19487f904731d7232120dcfeca8e1 (diff)
mfd: tps65090: add DT support for tps65090
Add device tree support for the TI PMIC TPS65090. The device can be registered through platform or DT. Add device tree binding document for this device. Signed-off-by: Laxman Dewangan <ldewangan@nvidia.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
Diffstat (limited to 'Documentation/devicetree')
-rw-r--r--Documentation/devicetree/bindings/regulator/tps65090.txt122
1 files changed, 122 insertions, 0 deletions
diff --git a/Documentation/devicetree/bindings/regulator/tps65090.txt b/Documentation/devicetree/bindings/regulator/tps65090.txt
new file mode 100644
index 000000000000..313a60ba61d8
--- /dev/null
+++ b/Documentation/devicetree/bindings/regulator/tps65090.txt
@@ -0,0 +1,122 @@
1TPS65090 regulators
2
3Required properties:
4- compatible: "ti,tps65090"
5- reg: I2C slave address
6- interrupts: the interrupt outputs of the controller
7- regulators: A node that houses a sub-node for each regulator within the
8 device. Each sub-node is identified using the node's name, with valid
9 values listed below. The content of each sub-node is defined by the
10 standard binding for regulators; see regulator.txt.
11 dcdc[1-3], fet[1-7] and ldo[1-2] respectively.
12- vsys[1-3]-supply: The input supply for DCDC[1-3] respectively.
13- infet[1-7]-supply: The input supply for FET[1-7] respectively.
14- vsys-l[1-2]-supply: The input supply for LDO[1-2] respectively.
15
16Optional properties:
17- ti,enable-ext-control: This is applicable for DCDC1, DCDC2 and DCDC3.
18 If DCDCs are externally controlled then this property should be there.
19- "dcdc-ext-control-gpios: This is applicable for DCDC1, DCDC2 and DCDC3.
20 If DCDCs are externally controlled and if it is from GPIO then GPIO
21 number should be provided. If it is externally controlled and no GPIO
22 entry then driver will just configure this rails as external control
23 and will not provide any enable/disable APIs.
24
25Each regulator is defined using the standard binding for regulators.
26
27Example:
28
29 tps65090@48 {
30 compatible = "ti,tps65090";
31 reg = <0x48>;
32 interrupts = <0 88 0x4>;
33
34 vsys1-supply = <&some_reg>;
35 vsys2-supply = <&some_reg>;
36 vsys3-supply = <&some_reg>;
37 infet1-supply = <&some_reg>;
38 infet2-supply = <&some_reg>;
39 infet3-supply = <&some_reg>;
40 infet4-supply = <&some_reg>;
41 infet5-supply = <&some_reg>;
42 infet6-supply = <&some_reg>;
43 infet7-supply = <&some_reg>;
44 vsys_l1-supply = <&some_reg>;
45 vsys_l2-supply = <&some_reg>;
46
47 regulators {
48 dcdc1 {
49 regulator-name = "dcdc1";
50 regulator-boot-on;
51 regulator-always-on;
52 ti,enable-ext-control;
53 dcdc-ext-control-gpios = <&gpio 10 0>;
54 };
55
56 dcdc2 {
57 regulator-name = "dcdc2";
58 regulator-boot-on;
59 regulator-always-on;
60 };
61
62 dcdc3 {
63 regulator-name = "dcdc3";
64 regulator-boot-on;
65 regulator-always-on;
66 };
67
68 fet1 {
69 regulator-name = "fet1";
70 regulator-boot-on;
71 regulator-always-on;
72 };
73
74 fet2 {
75 regulator-name = "fet2";
76 regulator-boot-on;
77 regulator-always-on;
78 };
79
80 fet3 {
81 regulator-name = "fet3";
82 regulator-boot-on;
83 regulator-always-on;
84 };
85
86 fet4 {
87 regulator-name = "fet4";
88 regulator-boot-on;
89 regulator-always-on;
90 };
91
92 fet5 {
93 regulator-name = "fet5";
94 regulator-boot-on;
95 regulator-always-on;
96 };
97
98 fet6 {
99 regulator-name = "fet6";
100 regulator-boot-on;
101 regulator-always-on;
102 };
103
104 fet7 {
105 regulator-name = "fet7";
106 regulator-boot-on;
107 regulator-always-on;
108 };
109
110 ldo1 {
111 regulator-name = "ldo1";
112 regulator-boot-on;
113 regulator-always-on;
114 };
115
116 ldo2 {
117 regulator-name = "ldo2";
118 regulator-boot-on;
119 regulator-always-on;
120 };
121 };
122 };